Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRICITY AND MAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Superconducting materials processing

The effects of materials processing on the properties and behavior of high temperature yttrium barium copper oxide (YBCO) superconductors were investigated. Electrical, magnetic, and structural characteristics of thin films (300 nm) YBA2CU3O(delta) structures grown by pulsed laser deposition on LaAlO3 and SrTiO3 substrates were used to evaluate processing. Pole projection and thin film diffraction measurements were used to establish grain orientation and verify structural integrity of the samples. Susceptibility magnetization, and transport measurements were used to evaluate the magnetic and electrical transport properties of the samples. Our results verified that an unfortunate consequence of processing is inherent changes to the internal structure of the material. This effect translates into modifications in the properties of the materials, and undesired feature that makes it very difficult to consistently predict material behavior. The results show that processing evaluation must incorporate a comprehensive understanding of the properties of the materials. Future studies will emphasize microstructural characteristics of the materials, in particular, those microscopic properties that map macroscopic behavior.

Hurley, John S.↗
NASA NTRS1979

Characterization of lightning return stroke electric and magnetic fields from simultaneous two-station measurements

The paper presents a characterization of Florida lightning return stroke electric and magnetic fields derived from simultaneous measurements of the fields at two separate stations, one station being within 15 km of the lightning, the other at either about 50 or 200 km from the lightning. Also presented are: (1) examples of correlated wave forms, (2) typical first and subsequent stroke wave forms over the distance range 1.0-200 km, and (3) the following statistical data from which the typical wave forms were derived: for electric field, rise time, initial peak value, ramp starting time, ramp slope, value at 170 microsec, ratio of value at 170 microsec to initial peak, zero-crossing time for 50 and 200 km wave forms; for magnetic fields, time of hump following initial peak, ratio of hump value to initial peak value, zero-crossing time for 50 and 200 km wave forms. Return stroke electric and magnetic field characteristics appear to be independent of location in Florida.

Lin, Y. T.↗
NASA NTRS1986

ISEE observations of the plasma sheet boundary, plasma sheet, and neutral sheet. I - Electric field, magnetic field, plasma, and ion composition

The first simultaneous study of dc and ac electric and magnetic fields, E x B velocity, plasma flows, ratio of plasma to magnetic field pressure, total energy density, energetic particles, and ion composition from the ISEE satellites and ground and interplanetary magnetic fields has been made to determine (1) the relationship of the previously observed electric fields at the plasma sheet boundary and at the neutral sheet to plasma parameters, and (2) whether the phenomena occurring during quiet and active times were consistent with the formation of a near-earth neutral line during substorms or with the boundary layer model. Five observations made during the study of two substorms were seen to be in agreement with the neutral-line model. The observations are consistent with the satellite being located at varying distances from the neutral line and diffusion region where reconnection and plasma acceleration were occurring. Although the z component (into or out of the ecliptic plane) of E x B convection was generally toward the neutral sheet, there were examples when it was consistent with the inferred motion of the plasma sheet past the satellite. A synthesis of previous reports on large electric fields at the plasma sheet boundary and variable fields at the neutral sheet including the associated plasma flows is also described.

Cattell, C. A.↗
NASA NTRS1977

Electric and magnetic fields in the high-latitude magnetosphere

The configuration of high-latitude electric and magnetic fields is reviewed. Various results suggest that high-latitude magnetic field lines from the outermost regions of the dayside magnetosphere converge toward a point near the noon meridian. Plasma flows, the midday cusp, and a dawn-dusk electric field across the polar cap are characterized. The electric fields associated with plasma flows produce Hall currents on the polar cap which vary with sector structure. Some evidence indicates that polar cap convection may reverse during intervals of strong northward interplanetary field. It is concluded that most observations are consistent with an open field magnetosphere model.

Fairfield, D. H.↗
NASA NTRS2005

Magnetic and Electrical Characteristics of Cobalt-Based Amorphous Materials and Comparison to a Permalloy Type Polycrystalline Material

Magnetic component designers are always looking for improved soft magnetic core materials to increase the efficiency, temperature rating and power density of transformers, motors, generators and alternators, and energy density of inductors. In this paper, we report on the experimental investigation of commercially available cobalt-based amorphous alloys which, in their processing, were subjected to two different types of magnetic field anneals: A longitudinal magnetic field anneal or a transverse magnetic field anneal. The longitudinal field annealed material investigated was Metglas 2714A. The electrical and magnetic characteristics of this material were investigated over the frequency range of 1 to 200 kHz and temperature range of 23 to 150 C for both sine and square wave voltage excitation. The specific core loss was lower for the square than the sine wave voltage excitation for the same maximum flux density, frequency and temperature. The transverse magnetic field annealed core materials include Metglas 2714AF and Vacuumschmelze 6025F. These two materials were experimentally characterized over the frequency range of 10 to 200 kHz for sine wave voltage excitation and 23 C only. A comparison of the 2174A to 2714AF found that 2714AF always had lower specific core loss than 2714A for any given magnetic flux density and frequency and the ratio of specific core loss of 2714A to 2714AF was dependent on both magnetic flux density and frequency. A comparison was also made of the 2714A, 2714AF, and 6025F materials to two different tape thicknesses of the polycrystalline Supermalloy material and the results show that 2714AF and 6025F have the lowest specific core loss at 100 kHz over the magnetic flux density range of 0.1 to 0.4 Tesla.

Wieserman, William R.↗
NASA NTRS1974

Electric and magnetic fields measured during a sudden impulse

The electric field in the ionosphere and the magnetic field at the earth's surface in the mid-latitude region were both measured during a sudden impulse. Ionospheric conductivities deduced from this data were consistent with expectations, thus suggesting that the fluctuations in the magnetic field at the earth's surface were caused by overhead ionospheric currents that were driven by an electric field associated with the sudden impulse.

Schutz, S.↗
NASA NTRS1977

Plasma rotation by electric and magnetic fields in a discharge cylinder

A theoretical model for an electric discharge consisting of a spatially diverging plasma sustained electrically between a small ring cathode and a larger ring anode in a cylindrical chamber with an axial magnetic field is developed to study the rotation of the discharge plasma in the crossed electric and magnetic fields. The associated boundary-value problem for the coupled partial differential equations which describe the electric potential and the plasma velocity fields is solved in closed form. The electric field, current density, and velocity distributions are discussed in terms of the Hartmann number and the Hall coefficient. As a result of Lorentz forces, the plasma rotates with speeds as high as 1 million cm/sec around its axis of symmetry at typical conditions. As an application, it is noted that rotating discharges of this type could be used to develop a high-density plasma-ultracentrifuge driven by j x B forces, in which the lighter (heavier) ion and atom components would be enriched in (off) the center of the discharge cylinder.

Wilhelm, H. E.↗
NASA NTRS1991

Transverse conductivity of a relativistic plasma in oblique electric and magnetic fields

Resistive tearing in a primary candidate for flares occurring in stressed magnetic fields. Its possible application to the strongly magnetized environments (Hz about 10 to the 12th G) near the surface of neutron stars, particularly as a mechanism for generating the plasma heating and particle acceleration leading to gamma-ray bursts, has motivated a quantum treatment of this process, which requires knowledge of the electrical conductivity sigma of a relativistic gas in a new domain (i.e., that of a low-density n/e/) plasma in oblique electric and magnetic fields. This paper discusses the mathematical formalism for calculating sigma and present numerical results for a wide range of parameter values. The results indicate that sigma depends very strongly on both the applied electric and magnetic fields.

Melia, Fulvio↗
NASA NTRS1981

"Finite part" electric and magnetic stored energies for planar antennas

A pair of formulas representing the time-average "finite part" electric and magnetic stored energies for planar antennas are derived. It is also shown that the asymptotic reciprocal relationship between quality factor and relative bandwidth exists for planar antennas.

Cockrell, C. R.↗
NASA NTRS1981

Calculations of lightning return stroke electric and magnetic fields above ground

Lin et al., (1980) presented a lightning return stroke model with which return stroke electric and magnetic fields measured at ground level could be reproduced. This model and a modified version of it, in which the initial current peak decays with height above ground, are used to compute waveforms for altitudes from 0-10 km and at ranges of 20 m to 10 km. Both the original and modified models gave accurate predictions of measured ground-based fields. The use of the calculated fields in calibrating airborne field measurements from simultaneous ground and airborne data is discussed.

Master, M. J.↗