Search NASA⌕ Search

SEARCH · Search NASA

Results for “ERROR FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

An alternate fine guidance sensor for the Space Telescope

Design features and the performance envelope of an alternate fine guidance sensor for the Space Telescope are delineated. A Digicon sensor, which requires focusing of a star image on the sensor, was selected as the alternate for the Koesters prism interferometer originally chosen. Optical elements scan the focal plane and are connected to star selecter servomechanisms. A 5 sq arcsec FOV serves as input, and guide stars have been identified to assure a 0.95 probability that one will always be present. The Digicon will permit pointing by 14.5 visual magnitude stars with errors kept below 0.004 arcsec. Guide star acquisition will be effected in the bang-bang mode with a state feedback in the linear area of the instrument error function. Simulations have demonstrated a satisfactory lock-on to stars down to 19th magnitude.

Griffin, M. D.↗
NASA NTRS1986

On self-preserving, variable-density, turbulent free jets

Published experimental data on incompressible, compresible, free binary, and confined binary turbulent axisymmetric jet flows are compiled and characterized, and the effect of varying turbulent diffusivity across the mixing region of a free jet is investigated analytically, applying the similarity-solution approach of So and Hwang (1986) to the self-preserving region. It is shown that closed-form solutions, represented by Gaussian error functions and having the turbulent Reynolds number and a profile-shape factor as free parameters, can be obtained if the turbulent diffusivities of momentum, mass, or heat are assumed to be different and to vary in both the streamwise and radial directions. An entrainment function uniquely related to the turbulent Reynolds number is derived, and good agreement between theoretical predictions and experimental measurements is demonstrated in graphs.

So, R. M. C.↗
NASA NTRS1986

On similarity solutions for turbulent and heated round jets

Commonly used empirical correlations for incompressible, heated round jets are shown to represent similarity solutions of the governing jet equations. These solutions give rise to self-similar eddy viscosities. Not all the similarity solutions are physically valid because some lead to zero eddy viscosities at the jet centerline. One physically valid solution is found to correlate best with round jet measurements and it gives a Gaussian error function description for the normalized mean velocity and temperature. Heat and momentum fluxes thus calculated are also in good agreement with measurements. Therefore, in addition to the classical similarity solution obtained by assuming constant eddy viscosity, another similarity solution to the jet equations is found where the eddy viscosity is self-similar.

So, R. M. C.↗
NASA NTRS1987

Shallow n(+) diffusion into InP by an open-tube diffusion technique

Very shallow n(+) layers have been obtained in InP by using gallium sulfide as a source for sulfur diffusion, and chemically vapor-deposited SiO2 as a cap. Diffusions were carried out from 585 to 725 C in an open-tube system with a nitrogen ambient. The doping profile of sulfur in InP is estimated to be of the complementary error function type with a surface concentration of 5.6 x 10 to the 18th/cc and a diffusion constant of 1.1 x 10 to the -14th sq cm/s at 670 C. Diodes made on n(+)-p junctions obtained by this diffusion technique show ideality factors close to unity and saturation current densities as low as 3.4 x 10 to the -15th A/sq cm, signifying the presence of a defect-free junction. These diffusions, with junction depths in the 400-700 A range, are ideal for solar cell applications.

Ghandhi, Sorab K.↗
NASA NTRS1988

Propagation of quasiplane waves along an impedance boundary

The parabolic approximation for the acoustic equations of motion is applied to the study of the sound field generated by a time harmonic plane wave at grazing incidence to a finite impedance boundary. The resulting equations possess a solution which may be expressed in terms of the complementary error function. Asymptotic expansion of this solution for field points near the boundary provides results compatible with those for a point source on the boundary for both the soft boundary (finite impedance) and hard boundary (the limit in which the impedance becomes infinite) cases. The presence of a surface wave in the solution is also established.

Mcaninch, G. L.↗
NASA NTRS1989

Encapsulated diffusion of sulphur into InP

This talk outlines a simple process for the fabrication of n(+)-p solar cells in indium phosphide. Large area cells (greater than 0.25 sq cm) have been made by this process, with a photovoltaic conversion efficiency of 15.21 percent under AM0 conditions of illumination. An ideality factor of 1.1 and a saturation current density of 8 x 10 to the minus 15th power A/sq cm have been observed for these cells. The technique for cell fabrication involves the diffusion of sulfur into InP by an open tube process, and gives highly reproducible results from run to run. A vacuum-deposited layer of gallium sulphide (Ga2S3) was used as the source for sulfur diffusion, with a chemically vapor deposited SiO2 cap layer to prevent decomposition of the InP surface during heat treatment. Diffusions were carried out in a flowing nitrogen ambient at 585 to 708 C, and characterized by their surface carrier concentration and the diffusion constant. The diffusion profile for sulfur in InP is estimated to be of the complementary error function type. The activation energy of the diffusion was estimated to be 1.94 eV. The technique described here is ideally suited for the fabrication of shallow n(+)-p junctions in InP, and has been used for space-borne solar cells.

Parat, K. K.↗
NASA NTRS1989

Laboratory test methodology for evaluating the effects of electromagnetic disturbances on fault-tolerant control systems

Control systems for advanced aircraft, especially those with relaxed static stability, will be critical to flight and will, therefore, have very high reliability specifications which must be met for adverse as well as nominal operating conditions. Adverse conditions can result from electromagnetic disturbances caused by lightning, high energy radio frequency transmitters, and nuclear electromagnetic pulses. Tools and techniques must be developed to verify the integrity of the control system in adverse operating conditions. The most difficult and illusive perturbations to computer based control systems caused by an electromagnetic environment (EME) are functional error modes that involve no component damage. These error modes are collectively known as upset, can occur simultaneously in all of the channels of a redundant control system, and are software dependent. A methodology is presented for performing upset tests on a multichannel control system and considerations are discussed for the design of upset tests to be conducted in the lab on fault tolerant control systems operating in a closed loop with a simulated plant.

Belcastro, Celeste M.↗
NASA NTRS1989

Real-time closed-loop simulation and upset evaluation of control systems in harsh electromagnetic environments

Digital control systems for applications such as aircraft avionics and multibody systems must maintain adequate control integrity in adverse as well as nominal operating conditions. For example, control systems for advanced aircraft, and especially those with relaxed static stability, will be critical to flight and will, therefore, have very high reliability specifications which must be met regardless of operating conditions. In addition, multibody systems such as robotic manipulators performing critical functions must have control systems capable of robust performance in any operating environment in order to complete the assigned task reliably. Severe operating conditions for electronic control systems can result from electromagnetic disturbances caused by lightning, high energy radio frequency (HERF) transmitters, and nuclear electromagnetic pulses (NEMP). For this reason, techniques must be developed to evaluate the integrity of the control system in adverse operating environments. The most difficult and illusive perturbations to computer-based control systems that can be caused by an electromagnetic environment (EME) are functional error modes that involve no component damage. These error modes are collectively known as upset, can occur simultaneously in all of the channels of a redundant control system, and are software dependent. Upset studies performed to date have not addressed the assessment of fault tolerant systems and do not involve the evaluation of a control system operating in a closed-loop with the plant. A methodology for performing a real-time simulation of the closed-loop dynamics of a fault tolerant control system with a simulated plant operating in an electromagnetically harsh environment is presented. In particular, considerations for performing upset tests on the controller are discussed. Some of these considerations are the generation and coupling of analog signals representative of electromagnetic disturbances to a control system under test, analog data acquisition, and digital data acquisition from fault tolerant systems. In addition, a case study of an upset test methodology for a fault tolerant electromagnetic aircraft engine control system is presented.

Belcastro, Celeste M.↗
NASA NTRS1990

An experimental study of fault propagation in a jet-engine controller

An experimental analysis of the impact of transient faults on a microprocessor-based jet engine controller, used in the Boeing 747 and 757 aircrafts is described. A hierarchical simulation environment which allows the injection of transients during run-time and the tracing of their impact is described. Verification of the accuracy of this approach is also provided. A determination of the probability that a transient results in latch, pin or functional errors is made. Given a transient fault, there is approximately an 80 percent chance that there is no impact on the chip. An empirical model to depict the process of error exploration and degeneration in the target system is derived. The model shows that, if no latch errors occur within eight clock cycles, no significant damage is likely to happen. Thus, the overall impact of a transient is well contained. A state transition model is also derived from the measured data, to describe the error propagation characteristics within the chip, and to quantify the impact of transients on the external environment. The model is used to identify and isolate the critical fault propagation paths, the module most sensitive to fault propagation and the module with the highest potential of causing external pin errors.

Choi, Gwan Seung↗
NASA NTRS1991

Local synthesis and tooth contact analysis of face-milled spiral bevel gears

A new approach is proposed for the local synthesis of spiral bevel gears. The approach provides contact at the mean contact point with the desired deviation of the transmission error function by a predesigned parabolic function. The orientation of the contact path on the gear tooth surface and the length of the major axis of the instantaneous contact ellipse are also included in the analysis. A tooth contact analysis (TCA) computer program was developed to simulate meshing and contact of the gear tooth surfaces. A numerical example of the process is given.

Litvin, F. L.↗
NASA NTRS1992

Inverse design of a proper number, shapes, sizes, and locations of coolant flow passages

During the past several years we have developed an inverse method that allows a thermal cooling system designer to determine proper sizes, shapes, and locations of coolant passages (holes) in, say, an internally cooled turbine blade, a scram jet strut, a rocket chamber wall, etc. Using this method the designer can enforce a desired heat flux distribution on the hot outer surface of the object, while simultaneously enforcing desired temperature distributions on the same hot outer surface as well as on the cooled interior surfaces of each of the coolant passages. This constitutes an over-specified problem which is solved by allowing the number, sizes, locations and shapes of the holes to adjust iteratively until the final internally cooled configuration satisfies the over-specified surface thermal conditions and the governing equation for the steady temperature field. The problem is solved by minimizing an error function expressing the difference between the specified and the computed hot surface heat fluxes. The temperature field analysis was performed using our highly accurate boundary integral element code with linearly varying temperature along straight surface panels. Examples of the inverse design applied to internally cooled turbine blades and scram jet struts (coated and non-coated) having circular and non-circular coolant flow passages will be shown.

George S. Dulikravich↗
NASA NTRS1990

Evaluation of optical systems designed using the 'concentric-aplanatic' method

After reviewing third-order aberration theory, three examples are given of the design of lenses by the concentric-aplanatic method. The performance of any optical system designed with this method can be improved by releasing all the constraints one by one. After correcting for third-order aberrations, the error function can be inspected to determine if the system is dominated by third- or higher-order aberrations.

Deslis, Apostolos↗
NASA NTRS1991

Design of multi-layer neural networks for accurate identification of nonlinear mappings

Guidelines for the design of multilayer neural networks for the identification of nonlinear mappings are considered. Since nonlinear mappings can be approximated by a one-hidden-layer neural network, an approach to determine the sufficient number of hidden layer nodes to achieve a global minima of the identification error function is considered.

Teixeira, Edilberto↗
NASA NTRS1993

A proposal of an architecture for the coordination level of intelligent machines

The issue of obtaining a practical, structured, and detailed description of an architecture for the Coordination Level of Center for Intelligent Robotic Systems for Sapce Exploration (CIRSSE) Testbed Intelligent Controller is addressed. Previous theoretical and implementation works were the departure point for the discussion. The document is organized as follows: after this introductory section, section 2 summarizes the overall view of the Intelligent Machine (IM) as a control system, proposing a performance measure on which to base its design. Section 3 addresses with some detail implementation issues. An hierarchic petri-net with feedback-based learning capabilities is proposed. Finally, section 4 is an attempt to address the feedback problem. Feedback is used for two functions: error recovery and reinforcement learning of the correct translations for the petri-net transitions.

Beard, Randall↗
NASA NTRS1992

FOCUS - An experimental environment for fault sensitivity analysis

FOCUS, a simulation environment for conducting fault-sensitivity analysis of chip-level designs, is described. The environment can be used to evaluate alternative design tactics at an early design stage. A range of user specified faults is automatically injected at runtime, and their propagation to the chip I/O pins is measured through the gate and higher levels. A number of techniques for fault-sensitivity analysis are proposed and implemented in the FOCUS environment. These include transient impact assessment on latch, pin and functional errors, external pin error distribution due to in-chip transients, charge-level sensitivity analysis, and error propagation models to depict the dynamic behavior of latch errors. A case study of the impact of transient faults on a microprocessor-based jet-engine controller is used to identify the critical fault propagation paths, the module most sensitive to fault propagation, and the module with the highest potential for causing external errors.

Choi, Gwan S.↗
NASA NTRS1992

Closed-ampoule diffusion of sulfur into Cd-doped InP substrates - Dependence of S profiles on diffusion temperature and time

In order to optimize the fabrication of n(+)-p InP solar cells made by closed-ampoule diffusion of sulfur into p-InP:Cd substrates, we have investigated the influence of diffusion conditions on sulfur diffusion profiles. We show that S diffusion in InP is dominated by the P vacancy mechanism and is not characterized by a complementary error function as expected for an infinite source diffusion. The S diffusion mechanism in p-InP is qualitatively explained by examining the depth profiles of S, P, and In in the emitter layer and by taking into account the presence and composition of different compounds found to form in the In-P-S-O-Cd system as a result of diffusion.

Faur, Mircea↗
NASA NTRS1957

Experimental Investigation of Temperature Feedback Control Systems Applicable to Turbojet-engine Control

Temperature - fuel-flow and temperature-area feedback control systems were investigated as means of controlling tailpipe gas temperature of a turbojet engine during transient operation in the high-speed region. Proportional-plus-integral control was used in both systems, but in the temperature-area control system it was necessary to add nonlinear components to the basic proportional-plus-integral control to provide satisfactory transient response to a desired step increase in temperature. Time integral of temperature-error functions were used as criteria for determining optimum transient response. A description of engine dynamics was obtained from frequency-response data.

ENGINES, TURBOJET↗
NASA NTRS1994

Continental-scale river flow in climate models

The hydrologic cycle is a major part of the global climate system. There is an atmospheric flux of water from the ocean surface to the continents. The cycle is closed by return flow in rivers. In this paper a river routing model is developed to use with grid box climate models for the whole earth. The routing model needs an algorithm for the river mass flow and a river direction file, which has been compiled for 4 deg x 5 deg and 2 deg x 2.5 deg resolutions. River basins are defined by the direction files. The river flow leaving each grid box depends on river and lake mass, downstream distance, and an effective flow speed that depends on topography. As input the routing model uses monthly land source runoff from a 5-yr simulation of the NASA/GISS atmospheric climate model (Hansen et al.). The land source runoff from the 4 deg x 5 deg resolution model is quartered onto a 2 deg x 2.5 deg grid, and the effect of grid resolution is examined. Monthly flow at the mouth of the world's major rivers is compared with observations, and a global error function for river flow is used to evaluate the routing model and its sensitivity to physical parameters. Three basinwide parameters are introduced: the river length weighted by source runoff, the turnover rate, and the basinwide speed. Although the values of these parameters depend on the resolution at which the rivers are defined, the values should converge as the grid resolution becomes finer. When the routing scheme described here is coupled with a climate model's source runoff, it provides the basis for closing the hydrologic cycle in coupled atmosphere-ocean models by realistically allowing water to return to the ocean at the correct location and with the proper magnitude and timing.

Miller, James R.↗