Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXPULSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Pressurized expulsion of nonisothermal single-phase cryogen

The performance of single-phase storage and expulsion systems as affected by temperature variations within the stored cryogen which are generated during heat transfer is discussed. Peculiar operating responses are indicated by spontaneous changes in fluid pressure which accompany g level changes, increased heater surface temperature, and durations of pressure cycles which differ considerably from that which is computed for an isothermal cryogen. The nonisothermal characteristics are predicted with a numerical model which includes the simultaneous solution of the time dependent conservation equations of mass, energy, and momentum in two space dimensions of Cartesian coordinates for boundary conditions which approximate those of the flight cryogenic system. The methodology of the numerical method and some comparisons between the predictions and the Apollo 12 flight data are included.

Forester, C. K.↗
NASA NTRS1972

Life prediction of expulsion bladders through fatigue test and fold strain analysis.

Consideration of the problem of reducing the probability of mechanical failure of bladder systems used for the expulsion of propellants into liquid rocket engines. It is shown that individual local folds in collapsing bladders can be classified into single and double folds, specifiable by nondimensional geometrical parameters which directly define the maximum strains at these folds. From these maximum strains the number of collapse/inflation cycles to failure can be obtained from low-cycle fatigue data experimentally determined for the bladder material of interest. Cycle life data are presented in terms of true maximum strain for four metals, two plastics, and two elastomers. It is found that double folds give rise to much more severe folding strains than do simple folds.

Chu, H. N.↗
NASA NTRS1973

Slosh testing of a spherical mercury propellant tank with positive-expulsion diaphragm

A preliminary investigation was conducted to evaluate the lateral slosh characteristics of a 23-cm diameter mercury propellant tank with a positive-expulsion diaphragm and 17.5% ullage. Data are presented for tank sinusoidal acceleration levels between 0.05 and 0.5 g at frequencies ranging from 5 to 50 Hz. Results indicate that slosh characteristics are highly nonlinear at acceleration levels approaching those in flight, and depend heavily on the shape and stiffness of the diaphragm. Nyquist plots of driving force over acceleration are shown to be a useful tool for determining natural frequency, damping, and modal mass characteristics. A computerized nonlinear least squares method for extracting the modal parameters from the Nyquist plots is described and results of applying the method are presented.

Ross, R. G., Jr.↗
NASA NTRS1974

Computer programs for pressurization (RAMP) and pressurized expulsion from a cryogenic liquid propellant tank

An analysis to predict the pressurant gas requirements for the discharge of cryogenic liquid propellants from storage tanks is presented, along with an algorithm and two computer programs. One program deals with the pressurization (ramp) phase of bringing the propellant tank up to its operating pressure. The method of analysis involves a numerical solution of the temperature and velocity functions for the tank ullage at a discrete set of points in time and space. The input requirements of the program are the initial ullage conditions, the initial temperature and pressure of the pressurant gas, and the time for the expulsion or the ramp. Computations are performed which determine the heat transfer between the ullage gas and the tank wall. Heat transfer to the liquid interface and to the hardware components may be included in the analysis. The program output includes predictions of mass of pressurant required, total energy transfer, and wall and ullage temperatures. The analysis, the algorithm, a complete description of input and output, and the FORTRAN 4 program listings are presented. Sample cases are included to illustrate use of the programs.

Masters, P. A.↗
NASA NTRS1987

Electro-expulsive separation system

An electro-expulsive system has one or more overlapped conductors, each comprising a flexible ribbon conductor, which is folded back on itself. The conductors are embedded in an elastomeric material. Large current pulses are fed to the conductors from power storage units. As a result of the antiparallel currents, the opposed segments of a conductor are forcefully separated and the elastomeric material is distended. Voids in the elastomer aid the separation of the conductor segments. The distention is almost instantaneous when a current pulse reaches the conductor and the distention tends to remove any solid body on the surface of the elastomeric material.

Haslim, Leonard A.↗
NASA NTRS1991

Pressurization and expulsion of cryogenic liquids: Generic requirements for a low gravity experiment

Requirements are presented for an experiment designed to obtain data for the pressurization and expulsion of a cryogenic supply tank in a low gravity environment. These requirements are of a generic nature and applicable to any cryogenic fluid of interest, condensible or non-condensible pressurants, and various low gravity test platforms such as the Space Shuttle or a free-flyer. Background information, the thermophysical process, preliminary analytical modeling, and experimental requirements are discussed. Key parameters, measurements, hardware requirements, procedures, a test matrix, and data analysis are outlined.

Vandresar, Neil T.↗
NASA NTRS2012

One-Dimensional, Two-Phase Flow Modeling Toward Interpreting Motor Slag Expulsion Phenomena

Aluminum oxide slag accumulation and expulsion was previously shown to be a player in various solid rocket motor phenomena, including the Space Shuttle's Reusable Solid Rocket Motor (RSRM) pressure perturbation, or "blip," and phantom moment. In the latter case, such un ]commanded side accelerations near the end of burn have also been identified in several other motor systems. However, efforts to estimate the mass expelled during a given event have come up short. Either bulk calculations are performed without enough physics present, or multiphase, multidimensional Computational Fluid Dynamic analyses are performed that give a snapshot in time and space but do not always aid in grasping the general principle. One ]dimensional, two ]phase compressible flow calculations yield an analytical result for nozzle flow under certain assumptions. This can be carried further to relate the bulk motor parameters of pressure, thrust, and mass flow rate under the different exhaust conditions driven by the addition of condensed phase mass flow. An unknown parameter is correlated to airflow testing with water injection where mass flow rates and pressure are known. Comparison is also made to full ]scale static test motor data where thrust and pressure changes are known and similar behavior is shown. The end goal is to be able to include the accumulation and flow of slag in internal ballistics predictions. This will allow better prediction of the tailoff when much slag is ejected and of mass retained versus time, believed to be a contributor to the widely-observed "flight knockdown" parameter.

Kibbey, Timothy P.↗
NASA NTRSDate not supplied

Validation of Computational Fluid Dynamics Model for Pressurized Expulsion of Liquid Methane using Non-Condensable Pressurant

An important aspect of cryogenic fluid management is the design of the pressurization systems used to maintain and regulate the tank pressure as propellant is expelled from the tanks. To design these systems efficiently and effectively it is important to be able to predict the amount pressurant gas needed and how the pressurant gas affects the propellant as it is added in the tank. Computational fluid dynamics (CFD) modeling is a common tool that is used to help with these predictions, so it is crucial to have CFD models that are validated by comparing numerical results to experimental data. In the 1970’s extensive testing was done at NASA Plum Brook K-Site Facility exploring the pressurant gas requirements needed to maintain tank pressure while liquid methane is discharged from a spherical tank. These tests explored using different pressurant gases (methane, helium, hydrogen, and nitrogen) under static and sloshing conditions. The data gathered from the experiments includes the gas and wall temperatures at the end of the expulsion, the gas concentrations, and the total amount of pressurant added. This study presents a CFD model that accurately predicts similar results to the experimental data specifically for the tests in which helium, a non-condensable gas, was used. This comparison anchors the commercial CFD code Flow3D model and gives confidence for future use in design and analysis of pressurization systems for cryogenic propellant tanks

computational fluid dynamics↗
NASA NTRS1972

Life prediction of expulsion bladders through fatigue test and fold strain analysis

Cycle life data are presented in terms of true maximum strain for four metals, two plastics, and two elastomers. The Coffin-Manson fatigue theory was applied for metals and plastics, and cut-growth fatigue theory for elastomers. The data are based on measurements made at room and elevated temperatures. It was found that double folds give rise to far severer folding strains than do simple folds. It was also found that, except for the elastomers, all the bladder materials develop surface cracks due to double folds after only one cycle. The findings indicate that metals, which are bets for premeation resistance, are worst for fatigue resistance, and vice versa for elastomers. The intermediate plastics were found to be unsatisfactory for both permeation and fatigue resistance for missions of extended duration.

Chu, H. N.↗
NASA NTRS1973

Attitude control of a large flexible spacecraft using three-axis mass expulsion control.

A study of the elastic effects of large area solar arrays on attitude control of a spacecraft was conducted. It is demonstrated for sufficiently low structural frequencies that excitation of certain modes can induce instability in the pitch axis. Stiffening the arrays can eliminate the instability. However, a severe weight penalty is associated with such modification. A more efficient means of minimizing the structural interaction effects is to change the shape of the array. For stable configurations, another problem may be encountered. This is the imposition of high rates on the spacecraft bus by oscillation of the solar arrays. Since low rates are required to obtain accurate science experiment results, it is imperative that the high rate problem be resolved. This also is possible by changing the solar array configuration.

Marsh, E. L.↗