SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thin-electrode fuel cell, with electrodes arranged in circular shape, can provide power for new electrochemical engine. With this system, a safe high-voltage engine may be constructed. Since each electrode assumes a potential relative to electrolyte, and since there are no electrolyte paths between cells, any number of cell stacks can be connected in series.
In this work, we present the results of two-dimensional modeling of the effects of non-equilibrium excitation and electrode geometry on H 2 /air ignition in a nanosecond plasma discharge. A multiscale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC) based on PASSKEy discharge modeling package and compressible multi-component reactive flow solver ASURF+ is developed and validated. This model is applied to simulate the impact of non-equilibrium plasma excitation and electrode geometry and heat loss on the dynamics of the discharge from streamer to spark and ignition kernel development in a H 2 /air mixture with a pair of cylindrical electrodes. The results show that the plasmagenerated species (N 2 (A), N 2 (B), N 2 (a'), N 2 (C), O( 1 D), O and H) in the spark and afterglow significantly accelerate the ignition kernel development. The increase of discharge voltage at the same total discharge energy promotes the non-equilibrium active species production. It is found that the production of electronically excited species at higher reduced electric field strength is more efficient in enhancing ignition in comparison to the vibrational excitation and heating. Moreover, the 2D simulation clearly reveals that the electric field and active species distribution are highly non-uniform. The streamers are initiated at the sharp outer edges of the negative and positive electrodes by a strong electric field while the electric field is much weaker at the centerline of the electrodes. Furthermore, the simulations reveal that the ignition enhancement is sensitive to the variation of electrode shape, diameter, and gap size due to the changes of electric field distribution and location of streamer formation. A cylindrical electrode produces a larger discharge volume and ignition kernel than the parabolic and spherical electrodes, when the discharge is localized near the axis of the gap. It is found that there is a non-monotonic dependence of ignition kernel size on the electrode diameter and inter-electrode distance. The increase of electrode diameter and gap size above the optimal conditions leads to the reduction of ignition kernel volume, due to the decrease of active species concentration and gas temperature. At a larger electrode surface area and electrode diameter as well as smaller electrode gap size, the heat loss to electrode plays a greater role in reducing the ignition kernel size and slowing ignition kernel development. This work provides insights and guidance to understand the kinetic enhancement of non-equilibrium plasma and the effects of electrode geometries on ignition for the optimization ignitors in advanced engines.
The development and deployment of inexpensive energy storage technologies is critical to realizing a clean energy grid. Batteries are being used in this role, but there remains a need for research on systems that are designed specifically for stationary energy storage, with a focus on lowering the overall cost rather than prioritizing the system energy density, specific energy, and power output. Here, we report the development of ultra-thick (1 cm thick) electrodes with engineered flow channels and explore the variables determining how thick these electrodes can feasibly be. Our proof of concept cell, utilizing the alkaline Ni-Zn chemistry, shows stable cycling over the initial 60 cycles but still suffers from the common Zn dendrite growth at the anode. To extend the life of these systems we report our novel methodology to completely remove Zn dendrites by exploiting the flow-through nature of our electrode architecture.
The project goal is to develop and demonstrate an advanced solvent-free lithium-ion battery electrode process through proposed Advanced Dry Electrode Process (ADEP) equipment, which is expected to exhibit a better binder fibrillization and high throughput and suitable for high performance electrode manufacturing, and commonize the anode and cathode dry processing equipment, supply chain and operation for lithium-ion battery OEMs for replacing the solvent-based slurry casting. Our proposed approach will facilitate low-cost battery production by addressing the following gaps in present dry electrode processing: • Extend the dry electrode fabrication process to lithium-ion battery anode manufacturing • Increase the active material content for anodes and cathodes • Intensify the process through improved mixing, powder rheology and surface modifications • Enable processing of next-generation electrode materials that are not stable to solvent or ambient air exposure. The project objectives include the development of anode-compatible binder and binder fibrillization promoter for low irreversible capacity loss, low electrode binder content yet higher film mechanical strength, and the optimization of solvent-free anode and cathode process for low cost (>60% electrode cost reduction), high performance (10% increase in energy density without sacrificing cycle life) and high throughput to enable next generation lithium-ion battery electrode production. Solvent-free electrode manufacturing will also enable next-generation cell designs based on prelithiated anodes or solid-state electrolytes.
The increasing demands of electronic devices and electric transportation necessitate lithium-ion batteries with simultaneous high energy and power capabilities. However, rate capabilities are often limited in high-loading electrodes due to the lengthy and tortuous ion transport paths with their electrochemical behaviors governed by complicated electrode architectures still elusive. Here, we report the electrode-level tortuosity engineering design enabling improved charge storage kinetics in high-energy electrodes. Both high areal capacity and high-rate capability can be achieved beyond the practical level of mass loadings in electrodes with vertically oriented architectures. The electrochemical properties in electrodes with various architectures were quantitatively investigated through correlating the characteristic time with tortuosity. The lithium-ion transport kinetics regulated by electrode architectures was further studied via combining the three-dimensional electrode architecture visualization and simulation. Finally, the tortuosity-controlled charge storage kinetics revealed in this study can be extended to general electrode systems and provide useful design consideration for next-generation high-energy/power batteries.
This is a poster presentation on our OREO international collaboration on fuel cell and electrolyzer electrode processing.
Savannah River Site uses brazed copper / tungsten electrodes for a specialized weld referred to as a pinch weld. As part of an internally funded PDRD program, an alternative method to produce the pinch weld electrodes was sought to improve quality and to reduce the manufacturing steps. Back casting of pinch weld electrodes was selected as such a process. During preliminary testing, deformation of the electrodes was observed. A failure analysis was conducted, and the strength of the electrodes was found to be significantly less than required to enable welding of the tubes. This assessment includes compression testing metallographic analysis. The pinch weld electrodes fabricated by back casting do not meet the requirements with respect to strength. In addition, a minimum strength requirement for conventionally prepared electrodes is recommended.
Abstract Discovering and engineering new materials with fast oxygen surface exchange kinetics and robust long‐term stability is essential for the large‐scale, economically viable commercialization of solid oxide fuel cell (SOFC) technology. The perovskite catalyst material BaFe 0.125 Co 0.125 Zr 0.75 O 3 (BFCZ75), predicted to be promising from recent density functional theory (DFT) calculations and unconventional due to its extremely high Zr content and low electronic conductivity, exhibits oxygen reduction reaction surface exchange rates on par with Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3 (BSCF) and excellent stability at typical operating temperatures. New composite electrodes are engineered by integrating BFCZ75 with commercial electrode materials La 1– x Sr x MnO 3 (LSM) and La 1– x Sr x Co y Fe 1– y O 3 (LSCF) and achieve high performance as measured by low area specific resistance (ASR) values, with the LSCF/BFCZ75 ASR values comparable to top performing noncomposite electrode materials such as SrCo 0.8 Sc 0.2 O 3– δ , BaNb 0.05 Fe 0.95 O 3– δ and BaCo 0.7 Fe 0.22 Y 0.08 O 3– δ . The use of BFCZ75 as a composite with LSCF achieving low ASR values shows that BFCZ75 is highly active and can easily integrate into existing SOFC material supply chains, lowering the barrier for potential commercial application of new electrode materials. Finally, these findings point to a broader unexplored class of perovskite materials with high fractions of redox inactive species (e.g., Zr, Nb, and Ta) that may unlock new pathways to realizing improved commercial SOFCs.
Rechargeable aluminum-graphite batteries using chloroaluminate-containing electrolytes have been the focus of significant research, particularly due to their high-rate capabilities. Engineered graphite electrodes have been shown to exhibit supercapacitor-like rate performance, despite the fact they store charge via the electrochemical intercalation of polyatomic AlCl4− anions. However, the origins of such rate capabilities are not well understood. Here, using electrochemical techniques, we disentangle quantitatively the diffusion-limited Faradaic, pseudocapacitive, and capacitive contributions to charge storage, revealing that AlCl4− anions intercalate into graphite with significant pseudocapacitive characteristics due to low ion diffusion limitations. Pristine and mildly exfoliated graphites are compared, where exfoliation resulted in significantly higher pseudocapacitive AlCl4− intercalation at the highest potential redox pair as well as higher galvanostatic capacity retention at faster discharge rates. The relationships between graphite structure, ion mass transport, and the overall rate of electrochemical AlCl4− intercalation are discussed. Ion diffusion within the electrolyte phase of the porous electrode is shown to play a key role in controlling the rate of intercalation at higher potentials and faster rates, which can be enhanced by reducing electrode tortuosity. The results establish that chloroaluminate anion intercalation into graphite exhibits non-diffusion-limited pseudocapacitive contributions that are tunable by modifying the graphite structure.
We present that Savannah River Site uses brazed copper/tungsten electrodes for a specialized weld referred to as a pinch weld. An alternative method to produce the pinch weld electrodes was sought to improve quality and to reduce the manufacturing steps. Backcasting of pinch weld electrodes was selected as such a process. During preliminary testing, deformation of the electrodes was observed. A failure analysis assessment was conducted and the strength of the electrodes was found to be significantly less than required to enable welding of the tubes. This assessment includes compression testing metallographic analysis. The pinch weld electrodes fabricated by backcasting do not meet the requirements with respect to strength. Additionally, a minimum strength requirement for conventionally prepared electrodes is recommended.
Not Available
Accel and focus electrode design for ion engine with improved efficiency
Na metal is an attractive anode material for rechargeable Na ion batteries, however, the dendritic growth of Na can cause serious safety issues. Along with modifications of solid-electrolyte interphase (SEI), engineering the electrode has been reported to be effective in suppressing Na dendritic growth, likely by reducing localized current density accumulation. However, fundamental understanding of Na growth at the nanoscale is still limited. Here, we report an in-situ study of Na electrodeposition in electrochemical liquid cells with the electrodes in different surface roughness, e.g., flat or sharp curvature. Real time observation using transmission electron microscopy (TEM) reveals the Na electrodeposition with remarkable details. Relatively large Na grains (in the micrometer scale) are achieved on the flat electrode surface. The local SEI thickness variations impact the growth rate, thus the morphology of individual grains. In contrast, small Na grains (in tens of nanometers) grow explosively on the electrode at the point with sharp curvature. The newly formed Na grains preferentially deposit at the base of existing grains close to the electrode. Further studies using continuum-based computational modeling suggest that the growth mode of an alkali metal (e.g. Na) is strongly influenced by the transport properties of SEI. Our direct observation of Na deposition in combination with the theoretical modeling provides insights for comprehensive understanding of electrode roughness and SEI effects on Na electrochemical deposition.
High-entropy oxides (HEOs) composed of multiple metal elements have attracted great attention as anode materials for lithium-ion batteries (LIBs) due to the synergistic effects of various metal species. However, the practical applications of HEOs are still plagued by poor conductivity, unstable solid electrolyte interphase (SEI) and poor cycling stability. In this work, nanosized (FeCoNiCrMn) 3 O 4 HEO (NHEO) is prepared successfully by the NaCl-assisted mechanical ball-milling strategy. Novelly, polyacrylonitrile (PAN) is used as the binder and then in situ thermochemically cyclized to construct a cyclized PAN (cPAN) outer layer onto NHEO (NHEO-cPAN). The in situ formed cPAN coating not only improves the electrical conductivity, but also reinforces the structural and interfacial stability, and thereby, the resulted NHEO-cPAN electrode exhibits significantly enhanced rate and cyclic performance. Specifically, NHEO-PAN500 electrode delivers a high reversible capacity of 560 mAh g –1 at 5 A g –1 and a high-capacity retention of 83% over 800 cycles at 3 A g –1 . Furthermore, the structural evolution and electrochemical behavior of NHEO-PAN electrode during discharge/charge is systematically investigated by operando X-ray diffraction, in situ impedance spectroscopy and ex situ high-resolution transmission electron microscopy. Therefore, this work provides new insights into the engineering of electrode and interphase for high-performance HEO electrode materials, potentially enlightening the practical applications of HEO-based LIBs.
Sputtering in an ionic propulsion system, surface stability and voltage breakdown for alkali-coated refractory electrodes
The lack of high-performance cathode catalysts is a salient issue that bedeviled the commercialization of protonic ceramic fuel cells (PCFCs). Here, in this work, we report a remarkable electrocatalytic activity and stability enhancement of cathode electrodes by engineering a coupled nanocomposite. The as-prepared Pr 0.3 (Ba 0.5 Sr 0.5 ) 0.7 Co 0.8 Fe 0.2 O 3−δ nanocomposite possesses a bulk cubic phase on which homogeneous and intimate orthorhombic PrCo 0.5 Fe 0.5 O 3−δ nanoparticles are uniformly decorated. X-ray diffraction and Raman spectroscopy reveal the excellent thermal stability of the nanocomposite. It achieves a high peak power density of 1.02 W cm –2 based on protonic electrolytes at 600 °C. No noticeable structural degradation is observed over ∼210 h at 550 °C according to scanning electron microscopy analysis. This work demonstrates an effective strategy to boost the performance of perovskite oxides for PCFCs via nanocomposite engineering. It may apply to other catalyst designs and discoveries, such as for batteries, electrolyzers, and membrane reactors.
Flexible electronics, as an emerging and exciting research field, have brought great interest to the issue of how to make flexible electronic materials that offer both durability and high performance at strained states. With the advent of on-body wearable and implantable electronics, as well as increasing demands for human-friendly intelligent soft robots, enormous effort is being expended on highly flexible functional materials, especially stretchable electrodes, by both the academic and industrial communities. Among different deformation modes, stretchability is the most demanding and challenging. This review focuses on the latest advances in stretchable transparent electrodes based on a new design strategy known as kirigami (the art of paper cutting) and investigates the recent progress on novel applications, including skin-like electronics, implantable biodegradable devices, and bioinspired soft robotics. By comparing the optoelectrical and mechanical properties of different electrode materials, some of the most important outcomes with comments on their merits and demerits are raised. Key design considerations in terms of geometries, substrates, and adhesion are also discussed, offering insights into the universal strategies for engineering stretchable electrodes regardless of the material. Finally, it is suggested that highly stretchable and biocompatible electrodes will greatly boost the development of next-generation intelligent life-like electronics.
Flowable carbon slurry electrodes promise continuous, scalable electrochemical desalination and energy storage when their rheology (flow and stability) and electronic connectivity are jointly optimized. This report integrates six complementary thrusts that we executed under the Laboratory Directed Research and Development (LDRD) project: (i) a fast, ex situ, centrifuge-compatible method to quantify pellet (packed slurry) electronic conductivity, with a validated cell constant (“shape factor”) and quantitative structure–property insights for carbon mixtures; (ii) a controlled circulation study showing that peristaltic pumping can irreversibly alter particle size and morphology over laboratory-relevant durations; (iii) development of a miniature jet pump that preserves particle integrity while achieving entrainment ratios of 2–4 at practical flow rates; (iv) a comprehensive mapping of how a representative non-ionic surfactant (Tween 20) collapses the carbon gel network, separating network-percolation losses from intrinsic particle contact resistance; (v) in-situ visualization revealing how gravitational settling and flow-driven mixing compete to control charge transport, with dynamic bed layers preventing saturation while achieving 30-fold local concentration enhancement; and (vi) a simple, widely adoptable fabrication route to structured, gas-nitrided titanium nitride (TiN) titanium current collectors that dramatically lower interfacial losses and enable geometry-driven performance gains. Together, these results provide a coherent toolchain and design rules to accelerate formulation screening, de-risk device prototyping, and standardize characterization for carbon slurry electrodes in flow-electrode capacitive deionization (FCDI), electrochemical flow capacitor (EFC), and related systems.