Search NASA⌕ Search

SEARCH · Search NASA

Results for “FDTD methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Hot Electron-Driven Photocatalysis Using Sub-5 nm Gap Plasmonic Nanofinger Arrays

Semiconductor photocatalysis has received increasing attention because of its potential to address problems related to the energy crisis and environmental issues. However, conventional semiconductor photocatalysts, such as TiO2 and ZnO, can only be activated by ultraviolet light due to their wide band gap. To extend the light absorption into the visible range, the localized surface plasmon resonance (LSPR) effect of noble metal nanoparticles (NPs) has been widely used. Noble metal NPs can couple incident visible light energy to strong LSPR, and the nonradiative decay of LSPR generates nonthermal hot carriers that can be injected into adjacent semiconductor material to enhance its photocatalytic activity. Here we demonstrate that nanoimprint-defined gap plasmonic nanofinger arrays can function as visible light-driven plasmonic photocatalysts. The sub-5 nm gaps between pairs of collapsed nanofingers can support ultra-strong plasmon resonance and thus boost the population of hot carriers. The semiconductor material is exactly placed at the hot spots, providing an efficient pathway for hot carrier injection from plasmonic metal to catalytic materials. This nanostructure thus exhibits high plasmon-enhanced photocatalytic activity under visible light. The hot carrier injection mechanism of this platform was systematically investigated. The plasmonic enhancement factor was calculated using the finite-difference time-domain (FDTD) method and was consistent with the measured improvement of the photocatalytic activity. This platform, benefiting from the precise controllable geometry, provides a deeper understanding of the mechanism of plasmonic photocatalysis.

42 ENGINEERING↗

Modeling of light intensification by conical pits within multilayer coatings

Removal of laser-induced damage sites provides a possible mitigation pathway to improve damage resistance of coated multilayer dielectric mirrors. In an effort to determine the optimal mitigation geometry which will not generate secondary damage precursors, the electric field distribution within the coating layers for a variety of mitigation shapes under different irradiation angles has been estimated using the finite difference time domain (FDTD) method. The coating consists of twenty-four alternating layers of hafnia and silica with a quarter-wave reflector design. A conical geometrical shape with different cone angles is investigated in the present study. Beam incident angles range from 0{sup o} to 60{sup o} at 5{sup o} increments. We find that light intensification (square of electric field, |E|{sup 2}) within the multilayers depends strongly on the beam incident direction and the cone angle. By comparing the field intensification for each cone angle under all angles of incidence, we find that a 30{sup o} conical pit generates the least field intensification within the multilayer film. Our results suggest that conical pits with shallow cone angles ({le} 30{sup o}) can be used as potential optimal mitigation structures.

42 ENGINEERING↗

A Particle-in-Cell Method for Plasmas with a Generalized Momentum Formulation, Part II: Enforcing the Lorenz Gauge Condition

In a previous paper Christlieb et al. (A particle-in-cell method for plasmas with a generalized momentum formulation, part I: Model formulation, 2024), we developed a new particle-in-cell (PIC) method for the relativistic Vlasov–Maxwell system in which the electromagnetic fields and the equations of motion for the particles were cast in terms of scalar and vector potentials through a Hamiltonian formulation. This new method evolved the potentials under the Lorenz gauge using integral equation methods. New methods to construct spatial derivatives of the potentials that converge at the same rates as the fields were also presented. The new particle method was compared against standard explicit discretizations, including the well-known FDTD-PIC method, for a range of applications involving sheaths and particle beams. Here, this paper extends this new class of methods by focusing on the enforcement the Lorenz gauge condition in both exact and approximate forms using co-located meshes. A time-consistency property of the proposed field solver for the vector potential form of Maxwell’s equations is established, which is shown to preserve the equivalence between the semi-discrete Lorenz gauge condition and the analogous semi-discrete continuity equation. Using this property, we present three methods to enforce a semi-discrete gauge condition. The first method introduces an update for the continuity equation that is consistent with the discretization of the Lorenz gauge condition. Both the finite difference and spectral implementations satisfy this discrete gauge condition to machine precision. The second approach we propose enforces a semi-discrete continuity equation using the boundary integral solution to the field equations. The potential benefit of this approach is that it eliminates spatial derivatives that appear on the particle data, namely the current density, which is often calculated by linear combinations of low-order spline basis functions. This method is ideally suited to boundary integral equation methods that invert multi-dimensional operators without dimensional splitting techniques and will be the subject of future work. The third approach introduces a gauge correcting method that makes direct use of the gauge condition to modify the scalar potential and uses local maps for both the charge and current densities. This results in a gauge error, as the maps do not enforce the continuity equation. The vector potential coming from the current density is taken to be exact, and using the Lorenz gauge, we compute a correction to the scalar potential that makes the two potentials satisfy the gauge condition. This method also enforces the gauge condition to machine precision. We demonstrate two of the proposed methods in the context of periodic domains. Problems defined on bounded domains, including those with complex geometric features remain an ongoing effort. However, this work shows that it is possible to design computationally efficient methods that can effectively enforce the Lorenz gauge condition in a non-staggered PIC formulation.

97 MATHEMATICS AND COMPUTING↗

Locating Partial Discharges in Power Transformers with Convolutional Iterative Filtering

The most common source of transformer failure is in the insulation, and the most prevalent warning signal for insulation weakness is partial discharge (PD). Locating the positions of these partial discharges would help repair the transformer to prevent failures. This work investigates algorithms that could be deployed to locate the position of a PD event using data from ultra-high frequency (UHF) sensors inside the transformer. These algorithms typically proceed in two steps: first determining the signal arrival time, and then locating the position based on time differences. This paper reviews available methods for each task and then propose new algorithms: a convolutional iterative filter with thresholding (CIFT) to determine the signal arrival time and a reference table of travel times to resolve the source location. The effectiveness of these algorithms are tested with a set of laboratory-triggered PD events and two sets of simulated PD events inside transformers in production use. Tests show the new approach provides more accurate locations than the best-known data analysis algorithms, and the difference is particularly large, 3.7X, when the signal sources are far from sensors.

47 OTHER INSTRUMENTATION↗

Casimir forces in the time domain: Theory

We present a method to compute Casimir forces in arbitrary geometries and for arbitrary materials based on the finite-difference time-domain (FDTD) scheme. The method involves the time evolution of electric and magnetic fields in response to a set of current sources, in a modified medium with frequency-independent conductivity. The advantage of this approach is that it allows one to exploit existing FDTD software, without modification, to compute Casimir forces. In this paper, we focus on the derivation, implementation choices, and essential properties of the time-domain algorithm, both considered analytically and illustrated in the simplest parallel-plate geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generalization of the FDTD algorithm for simulations of hydrodynamic nonlinear Drude model

In this paper we present a numerical method for solving a three-dimensional cold-plasma system that describes electron gas dynamics driven by an external electromagnetic wave excitation. The nonlinear Drude dispersion model is derived from the cold-plasma fluid equations and is coupled to the Maxwell's field equations. The Finite-Difference Time-Domain (FDTD) method is applied for solving the Maxwell's equations in conjunction with the time-split semi-implicit numerical method for the nonlinear dispersion and a physics based treatment of the discontinuity of the electric field component normal to the dielectric-metal interface. The application of the proposed algorithm is illustrated by modeling light pulse propagation and second-harmonic generation (SHG) in metallic metamaterials (MMs), showing good agreement between computed and published experimental results.

97 MATHEMATICS AND COMPUTING↗

Implementation of the Crank‐Nicolson Douglas‐Gunn finite‐difference time domain with complex frequency‐shifted perfectly matched layer for modeling unbounded isotropic dispersive media in two dimensions

Abstract To model open‐domain problems with Drude, Lorentz, and Debye media, the complex frequency‐shifted perfectly matched layer (CFS‐PML) is adopted to truncate the Crank‐Nicolson Douglas‐Gunn finite‐difference time‐domain (CNDG‐FDTD) region. The auxiliary differential equation (ADE) and the bilinear Z ‐transform methods are incorporated separately into the implementations of CNDG‐CFS‐PML formulations, while the ADE, piecewise linear recursive convolution (RC), and trapezoidal RC methods are utilized to model dispersive media. The proposed formulations can not only circumvent the stability condition, but also have the advantages of the CFS‐PML in attenuating the evanescent waves and reducing the late‐time reflection. Three numerical examples have been carried out to validate these formulations. The simulation results show that the proposed CNDG‐CFS‐PML algorithm is efficient in absorbing performance and saving more computational time compared with the conventional FDTD method, which leads to extensive applicability and acts as a very good prospect.

Shi, Xue‐Yang↗

Effect of Yagi–Uda nano-antenna element shape on the directivity and radiation efficiency

In this paper, different optimal designs of Yagi–Uda nano-antennas (NAs) are introduced and analyzed based on different element shapes to maximize the directivity and radiation efficiency. The studied element shapes include triangular, hexagonal, cube, square, rotated square, rectangular, ellipsoid, and elliptical cylinder shapes. The NAs parameters for each design are optimized using particle swarm optimization algorithm to achieve high directivity at a wavelength of 500 nm for wireless point-to-point applications. The designs are numerically analysed using 3-D finite difference time domain method (3-D FDTD) via Lumerical software package. To illustrate the performance of the proposed antennas, different radiation parameters such as radiation pattern, directivity, and radiation efficiency have been studied. Moreover, a tolerance of ± 5% is calculated to consider the imperfections that may appear in the fabrication process at a nanoscale. The optimized rectangular prism NA achieves the highest directivity of 24.21 with an efficiency of 50.74%. However, the optimized triangular prism NA has the highest efficiency of 73% with a directivity of 20.89. This enhancement is mainly attributed to the efficient coupling between array elements along with low side lobe level. However, a trade-off between directivity and radiation efficiency is obtained by the hexagonal prism NA with directivity of 21.9 and radiation efficiency of 69.1%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly efficient elliptical microcavity refractive index sensor with single detection unit

Here, an elliptical cavity is investigated in its vertical and horizontal arrangement as a single detection unit in a 2D hexagonal hole-type photonic crystal. The Q-factors are 3700, and 2600 for vertical and horizontally arranged cavities, respectively. The notable characteristic of the presented sensor is mainly its large detection range for refractive indices in range of n = 1 to over 2. The operation of the sensor can be divided into two distinct detection regions in separate spectra located next to lower and higher edges of photonic band gap. The design of cavities and their sensing characteristics are discussed in detail for each topology using FDTD and PWE methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of wide single-mode strip and grating loaded channel waveguides

New wide single-mode strip and grating loaded (SGL) channel waveguides made of silicon nitride on the oxide buffer layer of a planar silicon-on-insulator waveguide are studied. The central 10-lm-wide strip produces a multi-mode channel waveguide and diffraction gratings with a period 0.6 lm built on the structure edges produce mode-dependent additional losses due to radiation to the surrounding medium. The optical properties of these waveguides are discussed using the results of a three-dimensional numerical simulation by the FDTD and BPM methods. It is shown that a wide SGL waveguide is quasi-single-mode one because it has a small propagation loss ({approx} 0.3 dB cm{sup -1}) for the fundamental mode and a high (up to -20 dB cm{sup -1}) loss for the higher order modes. The new SGL waveguides are CMOS compatible and can become basic for fabricating new photonic elements, including tunable optical filters and multi-plexers based on the multireflector technology. (waveguides)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Peculiarities of the formation of photonic nanojets by a matrix of dielectric microtoroids

We report the results of theoretical modelling of photonic nanojets (PNJs) formed by laser radiation scattering on a single-layer ordered assembly of dielectric microtoroids placed on the surface of a transparent matrix (silicone film). Using the method of computational electrodynamics (FDTD), the main PNJ parameters (length, width, peak intensity) are analysed under the conditions of mutual influence of the light fields of neighbouring microparticles. It is shown that the main factor affecting the PNJ characteristics under study is the spatial configuration of the radiation-scattering particle, namely, the internal diameter of its cross section. It is found that for certain configurations of toroid placement in a cluster, a PNJ ensemble is implemented with parameters significantly better than those for a single toroid. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical and Analytical Modeling of the Effect of Cracks on the Self-Inductance of a COTS YJ-41003-TC Toroid

COTS inductors and transformers often contain partial cracks whose effect on inductance, a key performance parameter, have not been carefully studied. In this report, the effects of both partial and complete cracks on the self-inductance of a 100 turn square cross section COTS YJ-41003-TC toroid comprised of J Material was comprehensively investigated using both analytically derived closed form expressions and 3D computational techniques employing commercial codes. Both partial (half-penny) and complete (air gap) cracks of 10 and 25 μm were investigated. The crack is defined as the physical distance between two faces of the toroid's magnetic core, such that the surface normal of either face is along the Φ-direction, in alignment with the B-field. For the purposes of validation, two different approaches were incorporated for both the analytical and numerical models. The two analytical methods are comprised of a first principles approach based on the physics of electromagnetics, as well as linear circuit theory. The former directly utilizes the integral form of Maxwell's equations while the latter exploits the interchangeable relationship between electric and magnetic circuits. Validation within the computational scheme is realized through a code-to-code comparison between commercial solvers, COMSOL Multiphysics and CST, with the former employing the Finite Element Method (FEM) and the latter the Finite Difference Time Domain (FDTD) technique. Sound agreement between all four methods (ie., two analytical and two numerical) is observed, with results indicating that only a perturbation in self-inductance occurs for the half-penny cracks, while a substantial reduction takes place for the case of complete cracks. It is important to note that even though a static μ r is applied, representing the linear region of the BH curve (based on manufacturer specifications), the complete crack results still place a lower conservative bound on the inductance. This follows from the fact that even in the case of a half-penny crack, if the magnetic core portion of the crack approaches saturation, the crack begins to behave like an air gap, or complete crack. When an air gap is introduced into a magnetic core, a substantial reduction in inductance can occur due to the significant difference in permeabilities between the two mediums (ie., μ core >> μ air ). The once intact bulk magnetic core of the toroid essentially begins to behave like an air core.

36 MATERIALS SCIENCE↗

Investigation of Radar Propagation in Buildings: A 10 Billion Element Cartesian-Mesh FETD Simulation

In this paper large scale full-wave simulations are performed to investigate radar wave propagation inside buildings. In principle, a radar system combined with sophisticated numerical methods for inverse problems can be used to determine the internal structure of a building. The composition of the walls (cinder block, re-bar) may effect the propagation of the radar waves in a complicated manner. In order to provide a benchmark solution of radar propagation in buildings, including the effects of typical cinder block and re-bar, we performed large scale full wave simulations using a Finite Element Time Domain (FETD) method. This particular FETD implementation is tuned for the special case of an orthogonal Cartesian mesh and hence resembles FDTD in accuracy and efficiency. The method was implemented on a general-purpose massively parallel computer. In this paper we briefly describe the radar propagation problem, the FETD implementation, and we present results of simulations that used over 10 billion elements.

42 ENGINEERING↗

A transient near to far field transformation method and verification benchmarking procedure

The numerical calculation of electromagnetic far fields in the time-domain requires a near to far field transformation (NTFF) method. While time-domain NTFF methods for popular finite-difference time-domain (FDTD) approaches are well established, there is little discourse on NTFF methods for finite-element time-domain (FETD) codes. Here, this work is concerned with the development of an NTFF method for the Empire FETD code, which utilizes curl and divergence conforming elements. This discretization presents a difficulty in obtaining the equivalent electric current for the NTFF. Straightforward finite element interpolation of the fields is shown to give poor accuracy. Alternative interpolation methods are recommended. An expanding magnetic quadrupole pulse benchmark problem, which is fully developed in the appendices, provides the basis for quantitative comparison.

FETD↗

Parametric study of optical transmission through plasmonic hole arrays modulated by the phase transition of vanadium dioxide

We have performed comprehensive electromagnetic simulations and preliminary experiments to explore the effects of geometrical and material parameters on the extraordinary optical transmission (EOT) through periodic arrays of subwavelength holes in a bilayer stack consisting of a gold or silver film atop a vanadium dioxide film (Au/Ag + VO 2 ), where the latter undergoes a semiconductor-to-metal phase transition. Using the finite-difference time-domain (FDTD) and finite-element methods (FEM), we vary iteratively the array periodicity, VO 2 film thickness and hole diameters, as well as the refractive index inside the VO 2 -layer holes and the VO 2 optical constants. For each variation, we compare the metallic-to-semiconducting ratios of the zero-order transmission ( T 00 ) peaks and find sharp maxima in these ratios within narrow parameter ranges. The maxima arise from Fabry-Perot and Fano-type resonances that minimize T 00 in the semiconducting phase of the perforated bilayers. At a fixed array period, the primary factors controlling the VO 2 -enabled EOT modulation are the VO 2 thickness, diameter of the VO 2 -layer holes, and absorption in the two VO 2 phases. Besides uncovering the origins of the higher metallic-phase T 00 , this study provides a protocol for optimizing the performance of the bilayer hole arrays for potential uses as dynamically tunable nano-optical devices.

Donev, Eugenii U. (ORCID:000000030555219X)↗

Electric and magnetic losses modeled by a stable hybrid with explicit-implicit time-stepping for Maxwell's equations

A stable hybridization of the finite-element method (FEM) and the finite-difference time-domain (FDTD) scheme for Maxwell's equations with electric and magnetic losses is presented for two-dimensional problems. The hybrid method combines the flexibility of the FEM with the efficiency of the FDTD scheme and it is based directly on Ampere's and Faraday's law. The electric and magnetic losses can be treated implicitly by the FEM on an unstructured mesh, which allows for local mesh refinement in order to resolve rapid variations in the material parameters and/or the electromagnetic field. It is also feasible to handle larger homogeneous regions with losses by the explicit FDTD scheme connected to an implicitly time-stepped and lossy FEM region. The hybrid method shows second-order convergence for smooth scatterers. The bistatic radar cross section (RCS) for a circular metal cylinder with a lossy coating converges to the analytical solution and an accuracy of 2% is achieved for about 20 points per wavelength. The monostatic RCS for an airfoil that features sharp corners yields a lower order of convergence and it is found to agree well with what can be expected for singular fields at the sharp corners. A careful convergence study with resolutions from 20 to 140 points per wavelength provides accurate extrapolated results for this non-trivial test case, which makes it possible to use as a reference problem for scattering codes that model both electric and magnetic losses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

All-optical XNOR gate based on 2D photonic-crystal ring resonators

A novel all-optical XNOR gate is proposed, which combines the nonlinear Kerr effect with photonic-crystal ring resonators (PCRRs). The total size of the proposed optical XNOR gate based on photonic crystals with a square lattice of silicon rods is equal to 35 × 21 μm. The proposed structure has a bandgap in the range from 0.32 to 0.44. To confirm the operation and feasibility of the overall system use is made of analytical and numerical simulation using the dimensional finite difference time domain (FDTD) and plane wave expansion (PWE) methods. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗