SEARCH · Search NASA

Results for “FLOW - BODIES COMPRESSIBLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Matrix methods for the design of cascades to prescribed surface velocity distributions and for fully compressible flow

This paper describes matrix methods that have been developed for calculating compressible flow on a blade-to-blade surface of revolution. The methods have been fully tested to date only for the design of plane cascades to prescribed blade surface distributions; the methods will be illustrated here for that problem only. Similar methods are presently being applied to both the direct and indirect problems and for flow on arbitrary surfaces of revolution in annular cascades with stream sheet thickness variations. It is believed that by such methods, both the direct and indirect calculations can be reduced to about 60 to 90 seconds of computing.

Silvester, M. E.↗

NASA NTRS1980

Optical phase distortion due to compressible flow over laser turrets

Analytical models for optical phase distortion due to compressible flow over a laser turret are developed. Phase distortion is calculated for both blunt and small perturbation turrets. For the blunt turret, the Janzen-Rayleigh technique is used to determine the flow field. Phase distortions of 2.2 wavelengths at 3.8 microns are calculated for the blunt turret. For small perturbation turrets, a versatile analytical model is developed for a turret on a fuselage with circular cross section. With a two dimensional Fourier series representation of the turret, any shape can be considered. Both subsonic and supersonic flows can be calculated. Phase distortions of 1.2 wavelengths at 3.8 microns are calculated for one turret at high subsonic Mach number. In addition to being of value for laser turrets, the methods are applicable to reconnaissance aircraft using photographic equipment and cruise missiles using celestial navigation.

Fuhs, A. E.↗

NASA NTRS1983

Spectral methods for inviscid, compressible flows

Report developments in the application of spectral methods to two dimensional compressible flows are reviewed. A brief introduction to spectral methods -- their history and especially their implementation -- is provided. The stress is on those techniques relevant to transonic flow computation. The spectral multigrid iterative methods are discussed with application to the transonic full potential equation. Discontinuous solutions of the Euler equations are considered. The key element is the shock fitting technique which is briefly explained.

Hussaini, M. Y.↗

NASA NTRS1985

Spectral methods for inviscid, compressible flows

Report developments in the application of spectral methods to two dimensional compressible flows are reviewed. A brief introduction to spectral methods - their history and especially their implementation - is provided. The stress is on those techniques relevant to transonic flow computation. The spectral multigrid iterative methods are discussed with application to the transonic full potential equation. Discontinuous solutions of the Euler equations are considered. The key element is the shock fitting technique which is briefly explained.

Hussaini, M. Y.↗

NASA NTRS1950

On the theory of oscillating airfoils of finite span in subsonic compressible flow

The problem of oscillating lifting surface of finite span in subsonic compressible flow is reduced to an integral equation. The kernel of the integral equation is approximated by a simpler expression, on the basis of the assumption of sufficiently large aspect ratio. With this approximation the double integral occurring in the formulation of the problem is reduced to two single integrals, one of which is taken over the chord and the other over the span of the lifting surface. On the basis of this reduction the three-dimensional problem appears separated into two two-dimensional problems, one of them being effectively the problem of two-dimensional flow and the other being the problem of spanwise circulation distribution. Earlier results concerning the oscillating lifting surface of finite span in incompressible flow are contained in the present more general results.

Reissner, Eric↗

NASA NTRS2003

Uncertainty Propagation for Turbulent, Compressible Flow in a Quasi-1D Nozzle Using Stochastic Methods

This paper describes a fully spectral, Polynomial Chaos method for the propagation of uncertainty in numerical simulations of compressible, turbulent flow, as well as a novel stochastic collocation algorithm for the same application. The stochastic collocation method is key to the efficient use of stochastic methods on problems with complex nonlinearities, such as those associated with the turbulence model equations in compressible flow and for CFD schemes requiring solution of a Riemann problem. Both methods are applied to compressible flow in a quasi-one-dimensional nozzle. The stochastic collocation method is roughly an order of magnitude faster than the fully Galerkin Polynomial Chaos method on the inviscid problem.

Zang, Thomas A.↗

NASA NTRS1972

A method for calculating laminar viscous, compressible flows with small pressure gradients

A method is presented for calculating laminar viscous, compressible flows in which pressure gradients are assumed to be neglibible in energy conservation and in developing property relations, but not in momentum conservation. The equations are developed from Navier-Stokes equations in a noninertial reference frame. The method is an extension of an approximate method developed for calculating combined forced and contained natural convection in a rotating tank. The restriction to small density and temperature variations in the previous method is removed. For illustration, a two-dimensional simulation of the rotating tank problem is formulated, and the numerical computation procedure to be used is indicated.

Martin, E. D.↗

NASA NTRS1986

Incipient transition phenomena in compressible flows over a flat plate

The full three-dimensional time-dependent compressible Navier-Stokes equations are solved by a Fourier-Chebyshev method to study the stability of compressible flows over a flat plate. After the code is validated in the linear regime, it is applied to study the existence of the secondary instability mechanism in the supersonic regime.

Erlebacher, G.↗

NASA NTRS1992

The stability of a trailing-line vortex in compressible flow

We consider the inviscid stability of the Batchelor (1964) vortex in a compressible flow. The problem is tackled numerically and also asymptotically, in the limit of large (aximuthal and streamwise) wavenumbers, together with large Mach numbers. The nature of the solution passes through different regimes as the Mach number increases, relative to the wavenumbers. At very high wavenumbers and Mach numbers, the mode which is present in the incompressible case ceases to be unstable, while new 'center mode' forms, whose stability characteristics, are determined primarily by conditions close to the vortex axis. We find that generally the flow becomes less unstable as the Mach number increases, and that the regime of instability appears generally confined to disturbances in a direction counter to the direction of the rotation of the swirl of the vortex. Throughout the paper, comparison is made between our numerical results and results obtained from the various asymptotic theories.

Stott, Jillian A. K.↗

NASA NTRS1993

A study of the compressible flow through a diffusing S-duct

Benchmark aerodynamic data are presented for compressible flow through a representative S-duct configuration. A numerical prediction of the S-duct flow field, obtained from a subsonic parabolized Navier-Stokes algorithm, is also shown. The experimental and numerical results are compared. Measurements of the three-dimensional velocity field, total pressures, and static pressures were obtained at five cross-sectional planes. Aerodynamic data were gathered with calibrated pneumatic probes. Surface static pressure and surface flow visualization data were also acquired. All reported tests were conducted with an inlet centerline Mach number of 0.6. The Reynolds number, based on the inlet centerline velocity and duct inlet diameter, was 2.6 x 10(exp 6). Thin inlet turbulent boundary layers existed. The collected data should be beneficial to aircraft inlet designers and the measurements are suitable for the validation of computational codes. The results show that a region of streamwise flow separation occurred within the duct. Details about the separated flow region, including mechanisms which drive this complicated flow phenomenon, are discussed. Results also indicate that the duct curvature induces strong pressure driven secondary flows. The cross flows evolve into counter-rotating vortices. These vortices convect low momentum fluid of the boundary layer toward the center of the duct, degrading both the uniformity and magnitude of the total pressure profile.

Wellborn, Steven R.↗

NASA NTRS2006

SUPG Finite Element Simulations of Compressible Flows

The Streamline-Upwind Petrov-Galerkin (SUPG) finite element simulations of compressible flows is presented. The topics include: 1) Introduction; 2) SUPG Galerkin Finite Element Methods; 3) Applications; and 4) Bibliography.

Kirk, Brnjamin, S.↗

NASA NTRS1953

Equations, tables, and charts for compressible flow

This report, which is a revision and extension of NACA-TN-1428, presents a compilation of equations, tables, and charts useful in the analysis of high-speed flow of a compressible fluid. The equations provide relations for continuous one-dimensional flow, normal and oblique shock waves, and Prandtl-Meyer expansions for both perfect and imperfect gases. The tables present useful dimensionless ratios for continuous one-dimensional flow and for normal shock waves as functions of Mach number for air considered as a perfect gas. One series of charts presents the characteristics of the flow of air (considered a perfect gas) for oblique shock waves and for cones in a supersonic air stream. A second series shows the effects of caloric imperfections on continuous one-dimensional flow and on the flow through normal and oblique shock waves. (author)

Source record↗

NASA NTRS1989

Finite element formulations for compressible flows

Researchers started their studies on the development and application of computational methods for compressible flows. Particular attention was given to proper numerical treatment of sharp layers occurring in such problems and to general mesh generation capabilities for intricate computational geometries. Mainly finite element methods enhanced with several state-of-the art techniques (such as the streamline-upwind/Petrov-Galerkin, discontinuity capturing, adaptive implicit-explicit, and trouped element-by-element approximate factorization schemes) were employed.

Tezduyar, Tayfun E.↗

NASA NTRS1952

Method of analysis for compressible flow through mixed-flow centrifugal impellers of arbitrary design

A method is presented for analysis of the compressible flow between the hub and the shroud of mixed-flow impellers of arbitrary design. Axial symmetry was assumed, but the forces in the meridional (hub to shroud) plane, which are derived from tangential pressure gradients, were taken into account. The method was applied to an experimental mixed-flow impeller. The analysis of the flow in the meridional plane of the impeller showed that the rotational forces, the blade curvature, and the hub-shroud profile can introduce severe velocity gradients along the hub and the shroud surfaces. Choked flow at the impeller inlet as determined by the analysis was verified by experimental results.

Hamrick, Joseph T↗

NASA NTRS1996

Schwarz-Based Algorithms for Compressible Flows

We investigate in this paper the application of Schwarz-based algorithms to compressible flows. First we study the combination of these methods with defect-correction procedures. We then study the effect on the Schwarz-based methods of replacing the explicit treatment of the boundary conditions by an implicit one. In the last part of this paper we study the combination of these methods with Newton-Krylov matrix-free methods. Numerical experiments that show the performance of our approaches are then presented.

Tidriri, M. D.↗

NASA NTRS1996

Evaluation of Subgrid-Scale Models for Large Eddy Simulation of Compressible Flows

The objective of this project was to evaluate and develop subgrid-scale (SGS) turbulence models for large eddy simulations (LES) of compressible flows. During the first phase of the project results from LES using the dynamic SGS model were compared to those of direct numerical simulations (DNS) of compressible homogeneous turbulence. The second phase of the project involved implementing the dynamic SGS model in a NASA code for simulating supersonic flow over a flat-plate. The model has been successfully coded and a series of simulations has been completed. One of the major findings of the work is that numerical errors associated with the finite differencing scheme used in the code can overwhelm the SGS model and adversely affect the LES results. Attached to this overview are three submitted papers: 'Evaluation of the Dynamic Model for Simulations of Compressible Decaying Isotropic Turbulence'; 'The effect of the formulation of nonlinear terms on aliasing errors in spectral methods'; and 'Large-Eddy Simulation of a Spatially Evolving Compressible Boundary Layer Flow'.

Blaisdell, Gregory A.↗

NASA NTRS1978

An old integration scheme for compressible flows revisited, refurbished and put to work

A scheme for integrating the Euler equations of compressible flow in any hyperbolic case is presented. The scheme relies on the concept of characteristics but is strictly a finite difference scheme. Improvements in accuracy and physical consistence due to the scheme are discussed and results of its application to complex flows are shown.

Moretti, G.↗

NASA NTRS1982

Investigation of laser-induced iodine fluorescence for the measurement of density in compressible flows

Laser induced fluorescence is an attractive nonintrusive approach for measuring molecular number density in compressible flows although this technique does not produce a signal that is directly related to the number density. Saturation and frequency detuned excitation are explored as means for minimizing the quenching effect using iodine as the molecular system because of its convenient absorption spectrum. Saturation experiments indicate that with available continuous wave laser sources of Gaussian transverse intensity distribution only partial saturation could be achieved in iodine at the pressures of interest in gas dynamics. Using a fluorescence lineshape theory, it is shown that for sufficiently large detuning of a narrow bandwidth laser from a molecular transition, the quenching can be cancelled by collisional broadening over a large range of pressures and temperatures. Experimental data obtained in a Mach 4.3 underexpanded jet of nitrogen seeded with iodine for various single mode argon laser detunings from a strong iodine transition at 5145 A are discussed.

Mcdaniel, J. C., Jr.↗