Search NASA⌕ Search

SEARCH · Search NASA

Results for “Feature Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nuclear Safeguards: Feature Extraction for Machine Learning Enrichment Analysis of UF 6 Cylinders

With the increasing international interest in using nuclear material as sources of energy, comes the growing concern that we may see an increase in proliferation threats. Uranium hexafluoride (UF 6 ) is used in the nuclear fuel cycle for uranium enrichment. Inspectors from the International Atomic Energy Agency (IAEA) monitor the enrichment levels of UF 6 stored in transportation cylinders, to ensure the enrichments match that of a facility operator’s declarations. However, only a characteristic subset of UF 6 cylinders can be measured by inspectors from the IAEA during these inspections. In turn, the inspector may not identify a cylinder whose enrichment levels do not match the facility declarations. Therefore, our team attempts to develop a machine learning network that could determine the enrichment percentage of cylinders as they enter and exit facilities. The machine learning model must be robust against spectral variations due to factors that are internal and external to the UF 6 cylinder. Such factors include but are not limited to the speed and distance of the moving vehicle, cylinder type, cylinder orientation, and fill level. Many features in the spectral continuum can be used to identify and correct for some of these variations. As a consequence, the model must extract numerous features in the continuum. We investigate new approaches in continuum subtraction to verify enrichment percentage: interpolation and extrapolation of lines at the notable characteristic spectral peaks. It was determined that there was no clear answer on which method proved superior, therefore the decision was made to implement both new methods into the current codebase. We currently rely on synthetic training and testing data to analyze the results and fine tune our models but hope to test the system on measured data soon.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS2004

Real time on-chip sequential adaptive principal component analysis for data feature extraction and image compression

In this paper, we present a new, simple, and optimized hardware architecture sequential learning technique for adaptive Principle Component Analysis (PCA) which will help optimize the hardware implementation in VLSI and to overcome the difficulties of the traditional gradient descent in learning convergence and hardware implementation.

PCA feature extraction image compression real time↗
NASA NTRS1986

A Fourier-based textural feature extraction procedure

A procedure is presented to discriminate and characterize regions of uniform image texture. The procedure utilizes textural features consisting of pixel-by-pixel estimates of the relative emphases of annular regions of the Fourier transform. The utility and derivation of the features are described through presentation of a theoretical justification of the concept followed by a heuristic extension to a real environment. Two examples are provided that validate the technique on synthetic images and demonstrate its applicability to the discrimination of geologic texture in a radar image of a tropical vegetated area.

Stromberg, W. D.↗
NASA NTRS1995

Feature extraction of arc tracking phenomenon

This document outlines arc tracking signals -- both the data acquisition and signal processing. The objective is to obtain the salient features of the arc tracking phenomenon. As part of the signal processing, the power spectral density is obtained and used in a MATLAB program.

Attia, John Okyere↗
NASA NTRS1982

Use of Landsat-derived temporal profiles for corn-soybean feature extraction and classification

A physical model is presented, which has been derived from multitemporal-multispectral data acquired by Landsat satellites to describe the behavior and new features that are crop specific. A feasibility study over 40 sites was performed to classify the segment pixels into those of corn, soybeans, and others using the new features and a linear classifier. Results agree well with other existing methods, and it is shown the multitemporal-multispectral scanner data can be transformed into two parameters that are closely related to the target of interest and thus can be used in classification. The approach is less time intensive than other techniques and requires labeling of only pure pixels.

Badhwar, G. D.↗
DOE OSTI2020

Decreasing wind speed extrapolation error via domain-specific feature extraction and selection

Abstract. Model uncertainty is a significant challenge in the wind energy industry and can lead to mischaracterization of millions of dollars' worth of wind resources. Machine learning methods, notably deep artificial neural networks (ANNs), are capable of modeling turbulent and chaotic systems and offer a promising tool to produce high-accuracy wind speed forecasts and extrapolations. This paper uses data collected by profiling Doppler lidars over three field campaigns to investigate the efficacy of using ANNs for wind speed vertical extrapolation in a variety of terrains, and it quantifies the role of domain knowledge in ANN extrapolation accuracy. A series of 11 meteorological parameters (features) are used as ANN inputs, and the resulting output accuracy is compared with that of both standard log-law and power-law extrapolations. It is found that extracted nondimensional inputs, namely turbulence intensity, current wind speed, and previous wind speed, are the features that most reliably improve the ANN's accuracy, providing up to a 65 % and 52 % increase in extrapolation accuracy over log-law and power-law predictions, respectively. The volume of input data is also deemed important for achieving robust results. One test case is analyzed in depth using dimensional and nondimensional features, showing that the feature nondimensionalization drastically improves network accuracy and robustness for sparsely sampled atmospheric cases.

17 WIND ENERGY↗
NASA NTRS2004

Qualitative Features Extraction from Sensor Data using Short-time Fourier Transform

The information gathered from sensors is used to determine the health of a sensor. Once a normal mode of operation is established any deviation from the normal behavior indicates a change. This change may be due to a malfunction of the sensor(s) or the system (or process). The step-up and step-down features, as well as sensor disturbances are assumed to be exponential. An RC network is used to model the main process, which is defined by a step-up (charging), drift, and step-down (discharging). The sensor disturbances and spike are added while the system is in drift. The system runs for a period of at least three time-constants of the main process every time a process feature occurs (e.g. step change). The Short-Time Fourier Transform of the Signal is taken using the Hamming window. Three window widths are used. The DC value is removed from the windowed data prior to taking the FFT. The resulting three dimensional spectral plots provide good time frequency resolution. The results indicate distinct shapes corresponding to each process.

Amini, Abolfazl M.↗
DOE OSTI2023

Exploring Classification of Topological Priors With Machine Learning for Feature Extraction

In many scientific endeavors, increasingly abstract representations of data allow for new interpretive methodologies and conceptualization of phenomena. For example, moving from raw imaged pixels to segmented and reconstructed objects allows researchers new insights and means to direct their studies toward relevant areas. Thus, the development of new and improved methods for segmentation remains an active area of research. With advances in machine learning and neural networks, scientists have been focused on employing deep neural networks such as U-Net to obtain pixel-level segmentations, namely, defining associations between pixels and corresponding/referent objects and gathering those objects afterward. Topological analysis, such as the use of the Morse-Smale complex to encode regions of uniform gradient flow behavior, offers an alternative approach: first, create geometric priors, and then apply machine learning to classify. This approach is empirically motivated since phenomena of interest often appear as subsets of topological priors in many applications. Using topological elements not only reduces the learning space but also introduces the ability to use learnable geometries and connectivity to aid the classification of the segmentation target. Here, in this article, we describe an approach to creating learnable topological elements, explore the application of ML techniques to classification tasks in a number of areas, and demonstrate this approach as a viable alternative to pixel-level classification, with similar accuracy, improved execution time, and requiring marginal training data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

ORBITaL-Net: A labeled training library for large-scale building feature extraction

Over the course of several years, nearly 1.5 million building outlines have been created from approximately 128,000 training tiles covering roughly 7,000 km 2 of very high-resolution multispectral overhead imagery, primarily dated between 2010 and 2020. This dataset, dubbed the Oak Ridge Building Image and TrAining Label Net (ORBITaL-Net), is designed for machine learning applications and is global in scope, with samples drawn from 72 countries across North America, South America, Africa, Europe, and Asia. ORBITaL-Net captures a great diversity in geographic setting, structural characteristics, land use (urban and rural), terrain, and imagery conditions. While the labeled building outlines are themselves valuable, the dataset’s true strength lies in the pairing of these labels with corresponding reference imagery, which is being released for open source use. Similar to SpaceNet and Replicable AI For Microplanning (ramp), this building outline dataset will allow the larger computer vision community from academia, government, and industry the opportunity to develop robust, scalable, and generalizable geospatial machine learning techniques. Unlike SpaceNet and ramp, which offer high resolution labels and imagery primarily for large urban cities, ORBITaL-Net is not focused on training samples from heavily populated areas but instead aims to capture the innate variability of conditions present in both the physical environment and imagery collections.

Geography↗
DOE OSTI2020

Super resolution convolutional neural network for feature extraction in spectroscopic data

Two dimensional (2D) peak finding is a common practice in data analysis for physics experiments, which is typically achieved by computing the local derivatives. However, this method is inherently unstable when the local landscape is complicated or the signal-to-noise ratio of the data is low. In this work, we propose a new method in which the peak tracking task is formalized as an inverse problem, which thus can be solved with a convolutional neural network (CNN). In addition, we show that the underlying physics principle of the experiments can be used to generate the training data. By generalizing the trained neural network on real experimental data, we show that the CNN method can achieve comparable or better results than traditional derivative based methods. This approach can be further generalized in different physics experiments when the physical process is known.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Dynamic model-based feature extraction for fault detection and diagnosis of a supermarket refrigeration system

With the increasing concerns over climate change and carbon emissions, fault detection and diagnostics (FDD) of low–global warming potential (GWP) refrigerant supermarket refrigeration systems has gained great attention from academic and industrial sectors. Various FDD approaches have been developed to detect, identify, and diagnose faults to save energy, improve food quality, and protect the environment. Here, to mitigate the difficulty of collecting high-quality steady-state operational data in field operations faced by most model-based FDD methods, this study developed dynamic models of a low–GWP refrigerant (CO 2 ) supermarket refrigeration system. The model accuracy was validated using manufacturer data and experimental data. Simulations were conducted to predict the system dynamic response under two common operational faults—evaporator air path blockage fault and the display case door open fault—to identify fault patterns and define key dynamic behavior indexes for supporting FDD algorithm development.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

YOLO11 to SAM2 pipeline for feature extraction from nuclear test films

The response to the effects of nuclear detonations is supported by models that describe the evolution of the nuclear fireball and cloud and the associated transport of active debris. Validation of those descriptions relies on data from the nuclear test operations. Video records of those events offer a rich source of information that was exploited to a limited extent in historic analyses. Computer vision and machine learning techniques are powerful tools that can be used to increase the number of measurements that can be obtained from those films. In this work, we apply computer vision techniques to automatically track the temporal evolution of the nuclear fireball. In particular, we apply You Only Look Once 11 (YOLO11) and Segment Anything Model 2 (SAM2) in combination with minimal human intervention to digitized versions of the original nuclear test films. As part of the proposed workflow, the YOLO11 model is applied to films to determine bounding boxes for the fireball within each frame. These are then used as inputs to SAM2, which uses image segmentation to determine the fireball boundaries and their temporal evolution. We assess the accuracy of our approach by using it to determine the energy released during the Trinity nuclear test and comparing the results with previous analyses based on manual measurements.

Van Exel, Kimberly [ORNL] (ORCID:0009000877463894)↗