Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi resonance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Gate-tunable modulation of the optical properties of multilayer graphene by the reversible intercalation of ionic liquid anions

We demonstrate a substantial modulation of the optical properties of multilayer graphene (~100 layers) using a simple device consisting of a multilayer graphene/polymer electrolyte membrane/gold film stack. Applying a voltage of 3–4 V drives the intercalation of anion [TFSI] - [ion liquid diethylmethyl(2-methoxyethyl)ammonium bis(trifluoromethylsulfonyl)imide [DEME][TFSI]] resulting in the reversible modulation of the properties of this optically dense material. Upon intercalation, we observe an abrupt shift of 35 cm -1 in the G band Raman mode, an abrupt increase in FTIR reflectance over the wavelength range from 1.67 to 5 $μ$m (2000–6000 cm -1 ), and an abrupt increase in luminescent background observed in the Raman spectra of graphene. Furthermore, all of these abrupt changes in the optical properties of this material arise from the intercalation of the TFSI - ion and the associated change in the free carrier density (Δ$n$ = 10 20 cm -3 ). Suppression of the 2D band Raman mode observed around 3 V corresponds to Pauli blocking of the double resonance Raman process and indicates a modulation of the Fermi energy of Δ$E$ F = 1.1 eV.

42 ENGINEERING↗
DOE OSTI2020

Fermi Gases in Bichromatic Superlattices

The purpose of the program is the broad study of designer materials made of ultra-cold atoms and light, which provides new paradigms for emulating exotic layered systems. Bichromatic superlattices enable control and study of both dimensionality and dispersion in layered, strongly correlated Fermi gases, to model high-temperature superfluidity/superconductivity. Most layered materials are quasi-two-dimensional, neither two-dimensional, like a sheet, nor three-dimensional, like a gas, but somewhere in between. In quasi-2D layers with an unequal number of spin-up and spin-down electrons, particularly strong attraction between pairs of electrons with opposite spins is predicted to achieve the highest possible superconducting transition temperatures. To understand these materials, we emulate them with a layered, ultra-cold Fermi gas of 6Li atoms, magnetically tuned near a collisional (Feshbach) resonance, where precise control of the attraction, spin-composition, dimensionality and dispersion provides new tests of theory. The primary goals are of the program are: (1) Elucidation of the effects of dimensionality and confining potential shape on the enhancement of high-temperature superfluidity in a layered, strongly correlated Fermi gases; (2) Control of dispersion and the study of tunable Dirac points in one dimension.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pseudogap and Fermi arc induced by Fermi surface nesting in a centrosymmetric skyrmion magnet

Skyrmions in noncentrosymmetric materials are believed to occur due to the Dzyaloshinskii-Moriya interaction. By contrast, the skyrmion formation mechanism in centrosymmetric materials remains elusive. Here, in this work, we reveal the intrinsic electronic structure of the centrosymmetric GdRu 2 Si 2 by selectively measuring magnetic domains using angle-resolved photoemission spectroscopy (ARPES). We found robust Fermi surface (FS) nesting, consistent with the magnetic modulation q -vector detected by the previous resonant x-ray scattering measurements. The pseudogap opens at the nested FS portions, which vary for different magnetic domains. The anomalous pseudogap disconnects the FS to generate Fermi arcs with twofold symmetry. These results indicate that the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction plays a decisive role in generating the screw spin modulation responsible for the skyrmion formation in GdRu 2 Si 2 . Furthermore, we demonstrate the flexible nature of magnetism in GdRu 2 Si 2 by manipulating magnetic domains with magnetic field and temperature cyclings, providing potential future applications for data storage and processing devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Robust charge-density-wave correlations in the electron-doped single-band Hubbard model

There is growing evidence that the hole-doped single-band Hubbard and t–J models do not have a superconducting ground state reflective of the high-temperature cuprate superconductors but instead have striped spin- and charge-ordered ground states. Nevertheless, it is proposed that these models may still provide an effective low-energy model for electron-doped materials. Here we study the finite temperature spin and charge correlations in the electron-doped Hubbard model using quantum Monte Carlo dynamical cluster approximation calculations and contrast their behavior with those found on the hole-doped side of the phase diagram. We find evidence for a charge modulation with both checkerboard and unidirectional components decoupled from any spin-density modulations. These correlations are inconsistent with a weak-coupling description based on Fermi surface nesting, and their doping dependence agrees qualitatively with resonant inelastic x-ray scattering measurements. Our results provide evidence that the single-band Hubbard model describes the electron-doped cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Modified Fermi’s golden rule rate expressions

Fermi’s golden rule (FGR) serves as the basis for many expressions of spectroscopic observables and quantum transition rates. The utility of FGR has been demonstrated through decades of experimental confirmation. However, there still remain important cases where the evaluation of a FGR rate is ambiguous or ill-defined. Examples are cases where the rate has divergent terms due to the sparsity in the density of final states or time dependent fluctuations of system Hamiltonians. Strictly speaking, assumptions of FGR are no longer valid for such cases. However, it is still possible to define modified FGR rate expressions that are useful as effective rates. The resulting modified FGR rate expressions resolve a long standing ambiguity often encountered in using FGR and offer more reliable ways to model general rate processes. Finally, simple model calculations illustrate the utility and implications of new rate expressions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Zero-field spin resonance in graphene with proximity-induced spin-orbit coupling

In this work we investigate collective spin excitations in graphene with proximity-induced spin-orbit coupling (SOC) of the Rashba and valley-Zeeman types, as it is the case, e.g., for graphene on transition-metal-dichalcogenide substrates. It is shown that, even in the absence of an external magnetic field, such a system supports collective spin modes, which correspond to coupled oscillations of the uniform and valley-staggered magnetizations. These modes can be detected via both zero-field electron spin resonance (ESR) and zero-field electric-dipole spin resonance (EDSR), with EDSR response arising solely due to Rashba SOC. We analyze the effect of electron-electron interaction within the Fermi-liquid kinetic equation and show that the interaction splits both the ESR and EDSR peaks into two. The magnitude of splitting and the relative weights of the resonances can be used to extract the spin-orbit coupling constants and many-body interaction parameters that may not be accessible by other methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Resonant tunneling IR detectors

Researchers propose a novel semiconductor heterojunction photodetector which would have a very low dark current and would be voltage tunable. A schematic diagram of the device and its band structure are shown. The two crucial components of the device are a cathode (InGaAs) whose condition band edge is below the conduction band edge of the quantum wells and a resonant tunneling filter (GaAs-AlGaAs). In a standard resonant tunneling device the electrodes are made of the same material as the quantum wells, and this device becomes highly conducting when the quantum levels in the wells are aligned with the Fermi level in the negatively biased electrode. In contrast, the researchers device is essentially non-conducting under the same bias conditions. This is because the Fermi Level of the cathode (InGaAs) is still well below the quantum levels so that no resonant transport occurs and the barriers (AlGaAs) effectively block current flow through the device. However, if light with the same photon energy as the conduction-band discontinuity between the cathode and the quantum wells, E sub c3-E sub c1, is shone on the sample, free carriers will be excited to an energy corresponding to the lowest quantum level in the well closest to the cathode (hv plue E sub c1 = E sub o). These electrons will resonantly tunnel through the quantum wells and be collected as a photocurrent in the anode (GaAs). To improve the quantum efficiency, the cathode (InGaAs) should be very heavily doped and capped with a highly reflective metal ohmic contact. The thickness of the device should be tailored to optimize thin film interference effects and afford the maximum absorption of light. Because the device relies on resonant tunneling, its response should be very fast, and the small voltages needed to change the responsivity should allow for very high frequency modulation of the photocurrent. In addition, the device is tuned to a specific photon energy so that it can be designed to detect a fairly narrow range of wavelengths. This selectivity is important for reducing the photocurrent due to spurious light sources.

Woodall, Jerry M.↗
DOE OSTI2022

Kohn anomaly and elastic softening in body-centered cubic molybdenum at high pressure

Transition metals in body-centered cubic (bcc) structures under compression can display several novel physical properties because of their complex electronic structures and electron-phonon interactions. Here, we used inelastic x-ray scattering experiments in a diamond-anvil cell up to ∼45 GPa and density-functional theory calculations up to 210 GPa to investigate the phonon dispersions, and electronic and elastic properties of single-crystal molybdenum (Mo). Our results show a pressure-induced Kohn anomaly at 𝑞∼0.5 along the [ξ00] direction in the longitudinal acoustic mode at ∼45 GPa; this anomaly is triggered by the pressure-enhanced Fermi-surface nesting effect. Theoretical calculations show that electron redistributions in the 𝑠-to-𝑑 orbitals of bcc-Mo contribute to the shear modulus anomaly at ∼50 GPa. In contrast, the Young's modulus anomaly in bcc-Mo at ∼210 GPa results from a Lifshitz-type electronic topological transition. In conclusion, our results shed light on the complex electronic behaviors that are associated with macroscopic elastic properties in typical bcc 𝑑-block transition metals under compression.

3-dimensional systems↗
DOE OSTI2025

Valley-Mediated Singlet- and Triplet-Polaron Interactions and Quantum Dynamics in a Doped WSe 2 Monolayer

In doped transition metal dichalcogenides, optically created excitons (bound electron-hole pairs) can strongly interact with a Fermi sea of electrons to form Fermi polaron quasiparticles. When there are two distinct Fermi seas, as is the case in WSe 2 , there are two flavors of lowest-energy (attractive) polarons—singlet and triplet—where the exciton is coupled to the Fermi sea in the same or opposite valley, respectively. Using two-dimensional coherent electronic spectroscopy, we analyze how their quantum decoherence evolves with doping density and determine the condition under which stable Fermi polarons form. Because of the large oscillator strength associated with these resonances, intrinsic quantum dynamics of polarons as well as valley coherence between coupled singlet- and triplet polarons occur on subpicosecond timescales. Surprisingly, we find that a dark-to-bright state conversion process leads to a particularly long-lived singlet polaron valley polarization, persisting up to 200–800 ps. Valley coherence between the singlet- and triplet polaron is correlated with their energy fluctuations. In conclusion, our finding provides valuable guidance for the electrical and optical control of spin and valley indexes in atomically thin semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1983

Some spectral plasma diagnostics for prominences and structures in the middle chromosphere

The present investigation is concerned with the statistical equilibrium of the low-lying levels of Na, Sr(+), and Ba(+) under conditions appropriate to structures just above the solar surface. The solar and atomic data required for this objective are largely available with an adequate precision. However, the metastable (2)D term photoionization cross sections had to be calculated. In the calculations a variant of the scaled Thomas-Fermy method suggested by Kahler (1971) was used. The Na and Sr(+) resonance lines are readily measurable in ordinary prominences. The Ba(+) are weak. It is shown that the ratio of Na to Sr(+) resonance-line integrated intensities provides a useful and sensitive electron-density diagnostic for prominences, yielding values in the neighborhood of 10 to the 11th per cu cm. The statistical equilibrium solutions are applied to an analysis of data from the flash spectrum at eclipse.

Landman, D. A.↗
DOE OSTI2026

Correlating Surface Processing of Nb Superconducting RF Cavities with the Evolution of Surface Electronic States

Superconducting-radio frequency (RF) cavities provide an efficient way to accelerate particle beams with extremely high acceleration gradients while generating very small power dissipation. The few nanometers of the surface play a critical role in defining the RF performance of superconducting Nb based cavities. Over the past two decades, several pioneering surface treatment and processing methods have emerged, enabling remarkable improvements in superconducting cavity performance by simultaneously achieving high quality factors with increasing maximum acceleration gradients. These processing approaches include chemical polishing, distinct multi-step thermal treatments under ultra-high vacuum (UHV) conditions over low to high temperature regimes, as well as high-temperature treatments under controlled nitrogen atmospheres. Beyond their macroscopic impact on RF performance, these methods produce distinct surface oxide configurations characterized by different valence states, oxide thicknesses, chemical uniformity, and oxygen concentration profiles extending into the near-surface bulk of niobium. In this work, we are trying to understand how the surface-processing methods and the resulting oxide/oxygen profiles affect the electronic structure of surface and the mechanism of superconductivity. Using a combination of X-ray photoemission and X-ray absorption spectroscopies, we investigate how the valence-band structure and the electronic density of states (DoS) near the Fermi level evolve under different surface treatments. By employing tunable photon energies across multiple elemental absorption edges, we use resonant photoemission to disentangle and identify the elemental contributions to specific valence-band features. Our observations show that different surface-processing methods lead to distinct temperature evolutions of the DoS and valence-band states near the Fermi level. Our results suggest variations in different Nb-O orbital hybridizations in distinct processes and point towards the possibility of different underlying mechanisms of superconductivity governed by surface chemistry and oxide configuration. We also correlate these distinct superconducting mechanisms with RF cavity performance, specifically focusing on measured surface resistance, the nature of the Q-slope, and quench fields observed in superconducting RF measurements. These results will enable us to identify the potential limiting factors and relevant controllable parameters that can be further optimized to improve the performance of superconducting RF cavities.

Tripathi, Malvika [Fermilab] (ORCID:00000001989251↗
DOE OSTI2024

Untangling charge-order dependent bulk states from surface effects in a topological kagome metal ScV 6 Sn 6

Kagome metals with charge density wave (CDW) order exhibit a broad spectrum of intriguing quantum phenomena. The recent discovery of the novel kagome CDW compound ScV 6 Sn 6 has spurred significant interest. However, understanding the interplay between CDW and the bulk electronic structure has been obscured by a profusion of surface states and terminations in this quantum material. Here, in this study, we employ photoemission spectroscopy and potassium dosing to elucidate the complete bulk band structure of ScV 6 Sn 6 , revealing multiple van Hove singularities near the Fermi level. We surprisingly discover a robust spin-polarized topological Dirac surface resonance state at the M point within the twofold van Hove singularities. Assisted by first-principles calculations, the temperature dependence of the k z -resolved angle-resolved photoemission spectroscopy spectrum provides unequivocal evidence for the proposed $\sqrt{3}$×$\sqrt{3}$×3 charge order over other candidates. Our work not only enhances the understanding of the CDW-dependent bulk and surface states in ScV 6 Sn 6 , but also establishes an essential foundation for potential manipulation of the CDW order in kagome materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Neutrino-Nucleus Scattering Cross Sections at Medium Energies

The weak interactions of neutrinos with other Standard Model particles are well described within the Standard Model of particle physics. However, modern accelerator-based neutrino experiments employ nuclei as targets, where neutrinos interact with bound nucleons, turning a seemingly simple electroweak process into a complex many-body problem in nuclear physics. At the time of writing this Encyclopedia of Particle Physics chapter, neutrino-nucleus interactions remain one of the leading sources of systematic uncertainty in accelerator-based neutrino oscillation measurements. This chapter provides a pedagogical overview of neutrino interactions with nuclei in the medium-energy regime, spanning a few hundred MeV to several GeV. It introduces the fundamental electroweak formalism, outlines the dominant interaction mechanisms - including quasielastic scattering, resonance production, and deep inelastic scattering - and discusses how nuclear effects such as Fermi motion, nucleon-nucleon correlations, meson-exchange currents, and final-state interactions modify observable cross sections. The chapter also presents a brief survey of the foundational and most widely used theoretical models for neutrino-nucleus cross sections, together with an overview of current and upcoming accelerator-based neutrino oscillation experiments that are shaping the field. Rather than targeting experts, this chapter serves as a primer for advanced undergraduates, graduate students, and early-career researchers entering the field. It provides a concise foundation for understanding neutrino-nucleus scattering, its relevance to oscillation experiments, and its broader connections to both particle and nuclear physics.

Pandey, Vishvas [Fermilab] (ORCID:0000000230827987↗
DOE OSTI2022

Level density within a micro-macroscopic approach

Statistical level density $ρ$($E, A$) is derived for nucleonic system with a given energy $E$, particle number $A$ and other integrals of motion in the micro-macroscopic approximation beyond the standard saddle-point method of the Fermi gas model. This level density reaches the two limits; the well-known Fermi gas grand-canonical ensemble limit for a large entropy $S$ related to large excitation energies, and the finite micro-canonical limit for a small combinatorical entropy $S$ at low excitation energies. In conclusion, the inverse level density parameter $K$ as function of the particle number $A$ in the semiclassical periodic orbit theory, taking into account the extended Thomas-Fermi and Strutinsky shell corrections, is calculated and compared with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2003

Interplay of Collective Excitations in Quantum Well Intersubband Resonances

Intersubband resonances in a semiconductor quantum well (QW) display some of the most fascinating features involving various collective excitations such as Fermi-edge singularity (FES) and intersubband plasmon (ISP). Using a density matrix approach, we treated many-body effects such as depolarization, vertex correction, and self-energy consistently for a two-subband system. We found a systematic change in resonance spectra from FES-dominated to ISP-dominated features, as QW- width or electron density is varied. Such an interplay between FES and ISP significantly changes both line shape and peak position of the absorption spectrum. In particular, we found that a cancellation of FES and ISP undresses the resonant responses and recovers the single-particle features of absorption for semiconductors with a strong nonparabolicity such as InAs, leading to a dramatic broadening of the absorption spectrum.

Li, Jian-Zhong↗
DOE OSTI2023

Theoretical Analysis of Resonant Tunneling Enhanced Field Emission

In this paper, we develop an exact analytical quantum theory for field emission from surfaces with a nearby quantum well, by solving the one-dimensional time-independent Schrödinger equation. The quantum well, which may be introduced by ions, atoms, nanoparticles, etc., is simplified as a square potential well with depth H, width d, and distance to the surface L. The theory is used to analyze the effects of the quantum well (d, H, and L), the cathode properties (work function W and Fermi energy E F ), and dc field F. It is found that the quantum well can lead to resonant tunneling enhanced field emission up to several orders of magnitude larger than that from bare cathode surfaces. In the meantime, the electron-emission-energy spectrum is significantly narrowed. The strong enhancement region is bounded by the conditions eFL + H ≥ W + C and eFL ≤ W, with e being the elementary charge (positive) and C a constant dependent on dc field F. It is also found that the linear shift of resonance peaks in the electron-emission-energy spectrum with dc field F follows ε p =ε p⁢0 –e⁢FL, with ε p⁢0 being approximately the eigenenergies for electrons confined in a square potential well without a dc field. Finally, the theory provides insights for the design of high-efficiency field emitters, which can produce a high current and highly collimated electron beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Multiorbital charge-density wave excitations and concomitant phonon anomalies in Bi 2 Sr 2 LaCuO 6+δ

Charge-density waves (CDWs) are ubiquitous in underdoped cuprate superconductors. As a modulation of the valence electron density, CDWs in hole-doped cuprates possess both Cu-3d and O-2p orbital character owing to the strong hybridization of these orbitals near the Fermi level. Here, we investigate underdoped Bi 2 Sr 1.4 La 0.6 CuO 6+δ using resonant inelastic X-ray scattering (RIXS) and find that a short-range CDW exists at both Cu and O sublattices in the copper-oxide (CuO 2 ) planes with a comparable periodicity and correlation length. Furthermore, we uncover bond-stretching and bond-buckling phonon anomalies concomitant to the CDWs. Comparing to slightly overdoped Bi 2 Sr 1.8 La 0.2 CuO 6+δ , where neither CDWs nor phonon anomalies appear, we highlight that a sharp intensity anomaly is induced in the proximity of the CDW wavevector (Q CDW ) for the bond-buckling phonon, in concert with the diffused intensity enhancement of the bond-stretching phonon at wavevectors much greater than Q CDW . Our results provide a comprehensive picture of the quasistatic CDWs, their dispersive excitations, and associated electron-phonon anomalies, which are key for understanding the competing electronic instabilities in cuprates.

36 MATERIALS SCIENCE↗