Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flame speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Variation of the pressure limits of flame propagation with tube diameter for propane-air mixtures

An investigation was made of the variation of the pressure limits of flame propagation with tube diameter for quiescent propane with tube diameter for quiescent propane-air mixtures. Pressure limits were measured in glass tubes of six different inside diameters, with a precise apparatus. Critical diameters for flame propagation were calculated and the effect of pressure was determined. The critical diameters depended on the pressure to the -0.97 power for stoichiometric mixtures. The pressure dependence decreased with decreasing propane concentration. Critical diameters were related to quenching distance, flame speeds, and minimum ignition energy.

TEST APPARATUS - FLAME PROPOGATION - LFPL↗

Structure of Propagating and Attached Hydrocarbon Flames

Direct numerical simulations with C3-chemistry and radiative heat-loss models have been performed to reveal the internal structure of propagating and attached flames in an axisymmetric fuel jet of methane, ethane, ethylene, acetylene, or propane in air under normal and zero gravity. Observations of the flames were also made at the NASA Glenn 2.2-Second Drop Tower. In computations, the fuel issued into quasi-quiescent air for a fixed mixing time before it was ignited along the centerline at stoichiometry. The edge of the flame propagated through a flammable layer at the laminar flame speed of the stoichiometric fuel-air mixture independent of gravity. For all cases, a peak reactivity spot, i.e., reaction kernel, was formed in the flame base, thereby holding a trailing diffusion flame. The location of the reaction kernel in the attached flames depended inversely on the reactivity. The reaction-kernel correlations between the reactivity and the velocity were developed further using variables related to local Damkahler and Peclet numbers.

Takahashi, Fumiaki↗

Propagation of a premixed flame in a divided-chamber combustor

The propagation of premixed ethylene-air mixtures (of 0.5, 0.525, 0.55, and 0.65 equivalence ratios) in a divided-chamber combustor was investigated. The vessel, divided by a small cylindrical prechamber, had optical access (for laser-schlieren videography) and was instrumented by a pressure transducer. For the Reynolds numbers of 1870, 2300, and 2830, the observed spatial development of the laminar flames showed that the flame position and shape could be scaled by a characteristic time, based on the burned gas flame speed and the length of the prechamber. Above a Reynolds number of 4330, this scaling breaks down the appearance of Kelvin-Helmholtz instabilities. The observed flame propagation was compared with predictions obtained with a numerical model of flame propagation. The calculated spatial and temporal development of the flame in the main combustion chamber agreed with the experimental observations only for the lowest Reynolds number (1870).

Cattolica, R. J.↗

Effects of confinement on partially premixed flames

Partially premixed combustion is an intermediate regime between the limiting cases of premixed and nonpremixed combustion. Although combustion problems are generally approached from one of these two limiting cases, there are many practical situations where flames cannot be considered as purely premixed or nonpremixed, and thus the partially premixed approach must be used. In partially premixed combustion, mechanisms from the premixed and nonpremixed regimes can coexist, and as a result some interesting new phenomena can arise. One such phenomenon is the flame stabilization in laminar mixing layers by triple flames. One of the first observations of triple flames was made by Phillips (1965), who investigated a triple flame propagating in a methane mixing layer. Kioni et al. (1993) also examined triple flames both experimentally and numerically. There have also been numerous analytical studies on the shape and propagation of triple flames under various assumptions by Dold (1989), Dold et al. (1991), and Hartley and Dold (1991). In terms of modeling, Muller et al. (1994) have combined the flamelet formulations for premixed and nonpremixed combustion in order to treat lifted diffusion flames. One common feature in the analytical and numerical studies mentioned above is the assumption of zero heat release, which is necessary to make the problem tractable. The effect of heat release on triple flames was investigated by Ruetsch et al. (1995), where for the unconfined case, flame speeds larger than their premixed counterparts were found. One of the most important practical situations in which these conditions arise is in lifted turbulent jet diffusion flames. At a critical velocity the burning zone of a fuel jet lifts off from the nozzle, moves to increasing distances as the jet velocity increases, and finally blows off. The mechanisms that control these phenomena, i.e. that determine the stability of these flames, are still not understood. In addition to regions where diffusion flame stabilization takes place, partially premixed conditions also exist during the ignition process in nonpremixed systems. Numerical simulations by Reveillon et al. (1994) of the ignition process in a weakly stirred mixture of fuel and oxidizer show that triple flames propagate along lines of stoichiometric mixture fraction throughout the fluid. In addition, Peters (1994) notes that NO(x) emissions are likely to be large in such transient cases, and therefore an understanding of triple flames can provide information concerning pollutant formation. This study extends the work previously done and examines the effects of lateral confinement on partially premixed flames. Once again, we study both the flame structure and propagation.

Ruetsch, G. R.↗

Numerical simulations of the convective flame in white dwarfs

A first step toward better understanding of the mechanism driving convective flames in exploding white dwarfs is presented. The propagation of the convective flame is examined using a two-dimensional implicit hydrodynamical code. The large scales of the instability are captured by the grid while the scales that are smaller than the grid resolution are approximated by a mixing-length approximation. It is found that largescale perturbations (of order of the pressure scale height) do grow significantly during the expansion, leading to a very nonspherical burning front. The combustion rate is strongly enhanced (compared to the unperturbed case) during the first second, but later the expansion of the star suppresses the flame speed, leading to only partial incineration of the nuclear fuel. Our results imply that large-scale perturbations by themselves are not enough to explain the mechanism by which convective flames are driven, and a study of the whole spectrum of relevant perturbations is needed. The implications of these preliminary results on future simulations, in the context of current models for Type Ia supernovae, are discussed.

Livne, Eli↗

Outwardly Propagating Flames at Elevated Pressures

Spherical, outwardly-propagating flames of CH4-O2-inert and H2-O2-inert mixtures were experimentally studied in a high pressure apparatus. Stretch-free flame speeds and Markstein lengths were extracted for a wide range of pressures and equivalence ratios for spherically-symmetric, smooth flamefronts and compared to numerical computations with detailed chemistry and transport, as well as existing data in the literature. Wrinkle development was examined for propagating flames that were unstable under our experimental conditions. Hydrodynamic cells developed for most H2-air and CH4-air flames at elevated pressures, while thermal-diffusive instabilities were also observed for lean and near-stoichiometric hydrogen flames at pressures above atmospheric. Strategies in suppressing or delaying the onset of cell formation have been assessed. Buoyancy effects affected sufficiently off-stoichiometric CH4 mixtures at high pressures.

Law, C. K.↗

Premixing quality and flame stability: A theoretical and experimental study

Models for predicting flame ignition and blowout in a combustor primary zone are presented. A correlation for the blowoff velocity of premixed turbulent flames is developed using the basic quantities of turbulent flow, and the laminar flame speed. A statistical model employing a Monte Carlo calculation procedure is developed to account for nonuniformities in a combustor primary zone. An overall kinetic rate equation is used to describe the fuel oxidation process. The model is used to predict the lean ignition and blow out limits of premixed turbulent flames; the effects of mixture nonuniformity on the lean ignition limit are explored using an assumed distribution of fuel-air ratios. Data on the effects of variations in inlet temperature, reference velocity and mixture uniformity on the lean ignition and blowout limits of gaseous propane-air flames are presented.

Radhakrishnan, K.↗

Propagation of a premixed flame in a divided-chamber combustor

Experimental observations on the propagation of lean premixed ethylene-air flames in a divided-chamber combustion vessel have been compared with the results of numerical simulations based on a flame sheet-vortex dynamics model in axisymmetric coordinates. Flame speeds were found to increase from 10-24 cm/s as the equivalence ratio was varied from 0.5-0.65 in the experiments. Using the associated increase in gas velocity with equivalence ratio, the estimated Reynolds number in the experiment was changed from 1870 to 8090. Good agreement between experimental and theoretical results was obtained for the prechamber flame propagation rates and for the spatial and temporal development of the flame in the main combustion chamber at the lowest Reynolds number.

Cattolica, R. J.↗

Thermodynamic analysis of turbulent combustion in a spark ignition engine. Experimental evidence

A method independent of physical modeling assumptions is presented to analyze high speed flame photography and cylinder pressure measurements from a transparent piston spark ignition research engine. The method involves defining characteristic quantities of the phenomena of flame propagation and combustion, and estimating their values from the experimental information. Using only the pressure information, the mass fraction curves are examined. An empirical burning law is presented which simulates such curves. Statistical data for the characteristics delay and burning angles which show that cycle to cycle fractional variations are of the same order of magnitude for both angles are discussed. The enflamed and burnt mass fractions are compared as are the rates of entrainment and burning.

Beretta, G. P.↗

A comparison of transport algorithms for premixed, laminar steady state flames

The effects of different methods of approximating multispecies transport phenomena in models of premixed, laminar, steady state flames were studied. Five approximation methods that span a wide range of computational complexity were developed. Identical data for individual species properties were used for each method. Each approximation method is employed in the numerical solution of a set of five H2-02-N2 flames. For each flame the computed species and temperature profiles, as well as the computed flame speeds, are found to be very nearly independent of the approximation method used. This does not indicate that transport phenomena are unimportant, but rather that the selection of the input values for the individual species transport properties is more important than the selection of the method used to approximate the multispecies transport. Based on these results, a sixth approximation method was developed that is computationally efficient and provides results extremely close to the most sophisticated and precise method used.

Coffee, T. P.↗

Review of alternative fuels data bases

Based on an analysis of the interaction of fuel physical and chemical properties with combustion characteristics and indicators, a ranking of the importance of various fuel properties with respect to the combustion process was established. This ranking was used to define a suite of specific experiments whose objective is the development of an alternative fuels design data base. Combustion characteristics and indicators examined include droplet and spray formation, droplet vaporization and burning, ignition and flame stabilization, flame temperature, laminar flame speed, combustion completion, soot emissions, NOx and SOx emissions, and the fuels' thermal and oxidative stability and fouling and corrosion characteristics. Key fuel property data is found to include composition, thermochemical data, chemical kinetic rate information, and certain physical properties.

Harsha, P. T.↗

Numerical solution of the problem of flame propagation by the use of the random element method

A numerical, grid-free algorithm is presented for one-dimensional reaction-diffusion model of laminar flame propagation in premixed gases. It is based on the random element method we developed for the analysis of diffusional processes. The effect of combustion is taken into account by applying the principle of fractional steps to separate the process of diffusion, modeled by the random walk of computational elements, from the exothermic effects of chemical reaction, monitoring their strength. The validity of the algorithm is demonstrated by application to flame propagation problems for which exact solutions exist. The flame speed evaluated by its use oscillates around the exact value at a relatively small amplitude, while the temperature and species concentration profiles are self-correcting in their convergence to the exact solution. A satisfactory resolution is obtained by the use of quite a small number of computational elements which automatically adjust their distribution of fit sharp gradients.

Ghoniem, A. F.↗

Combustion characteristics in the transition region of liquid fuel sprays

A monodisperse aerosol generator was modified to study ignition requirements, flammability limits, and flame speeds in the transition region. An ignition system was developed and tested. The fabrication of an optical drop sizing system is nearly complete. Preliminary measurements of droplet size effects on the minimum ignition energy for n-heptane sprays performed. Parameteric studies of droplet size effects on minimum ignition energies of various fuels including alcohols are in progress.

Cernansky, N. P.↗

A simplified hydrocarbon reaction mechanism for combustion applications

A simplified chemical kinetic reaction mechanism for the combustion of a hydrocarbon fuel is presented and discussed. The observed kinetic behavior of propane combustion as determined in shock tube studies and the calculated kinetic behavior of propane/air mixtures as derived from a detailed propane combustion mechanism were used as a data base for constructing and refining the mechanism. The mechanism contains 13 chemical species and 26 chemical reactions. Numerical studies revealed that the simplified mechanism can reproduce the observed kinetic behavior of propane/air mixtures, including laminar flame speeds, over a wide range of temperatures and pressures. It is anticipated that the mechanism can be used in various combustion applications and provide a more realistic description of the combustion process than can be achieved using global reaction mechanisms.

Jachimowski, C. J.↗

Investigation of the Liquid Fluorine-liquid Diborane Propellant Combination in a 100-pound-thrust Rocket Engine

The experimental performance of liquid fluorine and liquid diborane was investigated in a 100-pound-thrust engine at a combustion pressure of 300 pounds per square inch absolute. Methods of handling and transporting liquid fluorine were developed. It was extremely difficult to obtain satisfactory operation because of the high flame speed and high combustion chamber temperatures. The maximum performance obtained was 280 pound seconds per pound, 88 percent of the theoretical maximum. The theoretical performance was recalculated with revised thermodynamic data, indicating a maximum specific impulse of 311 pound seconds per pound as compared with the previously reported value of 323.

COMBUSTION - ROCKET ENGINES↗

Variation of pressure limits of flame propagation with tube diameter for various isooctane-oxygen-nitrogen mixtures

An investigation was made of the change in the pressure limits of flame propagation with tube diameter for various isooctane-oxygen-nitrogen mixtures. Pressure limits were measured in cylindrical glass tubes of four different inside diameters at six different oxygen-nitrogen ratios. Under the experimental conditions, flame propagation was found to be impossible in isooctane-oxygen mixtures with oxygen concentrations less than 11 to 12 percent. Critical tube diameters for flame propagation were calculated and the effect of pressure was determined and compared with the effect of pressure on quenching distance. Critical diameters were related to flame speeds for various isooctane-oxygen-nitrogen mixtures.

FUELS-PROPERTIES,PHYSICAL AND CHEMICAL↗

Passive turbulent flamelet propagation

We analyze results of a premixed constant density flame propagating in three-dimensional turbulence, where a flame model developed by Kerstein, et al. (1988) has been used. Simulations with constant and evolving velocity fields are used, where peculiar results were obtained from the constant velocity field runs. Data from the evolving flow runs with various flame speeds are used to determine two-point correlations of the fluctuating scalar field and implications for flamelet modeling are discussed.

Ashurst, William T.↗

Thermally-Choked Combustor Technology

A program is underway to demonstrate the practical feasibility of thermally-choked combustor technology with particular emphasis on rocket propulsion applications. Rather than induce subsonic to supersonic flow transition in a geometric throat, the goal is to create a thermal throat by adding combustion heat in a diverging nozzle. Such a device would have certain advantages over conventional flow accelerators assuming that the pressure loss due to heat addition does not severely curtail propulsive efficiency. As an aid to evaluation, a generalized one-dimensional compressible flow analysis tool was constructed. Simplified calculations indicate that the process is fluid dynamically and thermodynamically feasible. Experimental work is also being carried out in an attempt to develop, assuming an array of practical issues are surmountable, a practical bench-scale demonstrator using high flame speed H2/O2 combustibles.

Knuth, William H.↗