Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flybys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Flyby Design Using Heteroclinic and Homoclinic Connections of Unstable Resonant Orbits

Tour designs using flybys have traditionally been studied using two-body patched conic methods. Previous work has shown that trajectories designed using these techniques and with optimization methods follow the invariant manifolds of unstable resonant orbits as they transition between resonances. This work is continued here by computing heteroclinic and homoclinic trajectories associated with these unstable resonant orbits. These trajectories are used with multiple resonances to design flybys that transition between these resonances in the circular restricted three-body problem without the need for two-body approximations.

three body problem↗

Stardust-next : Lessons Learned from a Comet Flyby Mission

The Stardust-NExT (New Exploration of Tempel) mission, a follow-on to the Stardust prime mission, successfully completed a flyby of comet Tempel-1 on 2/14/11. However there were many challenges along the way, most significantly low propellant margin and detection of the comet in imagery later than antici-pated. These challenges and their ramifications forced the project to respond with flexibility and ingenuity. As a result, the flyby at an altitude of 178 km was nearly flawless, accomplishing all its science objectives. Lessons learned on Stardust-NExT may have relevance to other spacecraft missions.

Tempel 1↗

Attitude Determination and Control Subsystem (ADCS) Preparations for the EPOXI Flyby of Comet Hartley 2

On November 4, 2010 the former "Deep Impact" spacecraft, renamed "EPOXI" for its extended mission, flew within 700km of comet 103P/Hartley 2. In July 2005, the spacecraft had previously imaged a probe impact of comet Tempel 1. The EPOXI flyby was the fifth close encounter of a spacecraft with a comet nucleus and marked the first time in history that two comet nuclei were imaged at close range with the same suite of onboard science instruments. This challenging objective made the function of the attitude determination and control subsystem (ADCS) critical to the successful execution of the EPOXI flyby.As part of the spacecraft flyby preparations, the ADCS operations team had to perform meticulous sequence reviews, implement complex spacecraft engineering and science activities and perform numerous onboard calibrations. ADCS contributions included design and execution of 10 trajectory correction maneuvers, the science calibration of the two telescopic instruments, an in-flight demonstration of high-rate turns between Earth and comet point, and an ongoing assessment of reaction wheel health. The ADCS team was also responsible for command sequences that included updates to the onboard ephemeris and sun sensor coefficients and implementation of reaction wheel assembly (RWA) de-saturations.

attitude determination and control↗

THE CLOSEST KNOWN FLYBY OF A STAR TO THE SOLAR SYSTEM

Passing stars can perturb the Oort Cloud, triggering comet showers and potentially extinction events on Earth. We combine velocity measurements for the recently discovered, nearby, low-mass binary system WISE J072003.20-084651.2 (“Scholz’s star”) to calculate its past trajectory. Integrating the Galactic orbits of this ∼0.15 M{sub ⊙} binary system and the Sun, we find that the binary passed within only 52{sup +23}{sub −14} kAU (0.25{sup +0.11}{sub −0.07} pc) of the Sun 70{sup +15}{sub −10} kya (1σ uncertainties), i.e., within the outer Oort Cloud. This is the closest known encounter of a star to our solar system with a well-constrained distance and velocity. Previous work suggests that flybys within 0.25 pc occur infrequently (∼0.1 Myr{sup −1}). We show that given the low mass and high velocity of the binary system, the encounter was dynamically weak. Using the best available astrometry, our simulations suggest that the probability that the star penetrated the outer Oort Cloud is ∼98%, but the probability of penetrating the dynamically active inner Oort Cloud (<20 kAU) is ∼10{sup −4}. While the flyby of this system likely caused negligible impact on the flux of long-period comets, the recent discovery of this binary highlights that dynamically important Oort Cloud perturbers may be lurking among nearby stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Ground noise measurements during landing, take-off, and flyby operations of a four-engine turbopropeller STOL airplane

Noise measurements were obtained for a four-engine turbopropeller STOL airplane during a Federal Aviation Administration flight evaluation program at the National Aviation Facilities Experimental Center. These noise measurements involved landing-approach, takeoff-climbout, and flyby operations of the airplane. A total of 13 measuring positions were used to define the noise characteristics around a simulated STOL port. The results are presented in the form of both physical and subjective measurements. An appendix is included to present tabulated values of various subjective reaction units which may be significant for the planning and operation of STOL ports. The main source of noise produced by this vehicle was found to be the propeller, and noise levels decrease generally in accordance with the inverse-distance law for distances up to about 457 meters. For similar slant ranges, somewhat lower noise levels were experienced during flyby than during takeoff or landing.

Hilton, D. A.↗

Imaging of Mercury and Venus from a flyby.

Study of an imaging experiment planned for the 1973 Mariner Venus/Mercury flyby mission. Scientific objectives are presented together with mission constraints, analysis of alternative systems, and the rationale for the final choice. The final selection was a vidicon camera quite similar to that used for Mariner Mars 1971, but with the capability of real time transmission during the Venus and Mercury flybys. Systematic high resolution UV photography of Venus is planned after encounter in an attempt to understand the nature of the mysterious UV markings and their apparent 4- to 5-day rotation period.

Murray, B. C.↗

Trajectory design of a solar electric propulsion Encke slow flyby mission

A slow flyby of the periodic comet, Encke, prior to its perihelion passage in 1980 has been shown to be a feasible mission for a solar electric propulsion spacecraft using a moderate power level of around 15 kw. The mission is accomplished in slightly less than two years with a planned miss distance and flyby speed of 1000 km and 4 km/s respectively. The results of a performance tradeoff study are presented together with a description of the nominal trajectory. The trajectories used in these mission studies were calculated using an updated model of the 30 cm mercury bombardment thruster's performance. The trajectory simulations include optimum staging of operating thrusters as a function of input power level constraints and limits on the variation of thruster specific impulse and efficiency as a function of thruster input power.

Sauer, C. G., Jr.↗

Multi-asteroid flyby trajectories using Venus-earth gravity assists

The feasibility of using Venus and earth gravity assists for delivering spacecraft to the asteroid belt with a low launch energy but with the additional flight time from earth to Venus and back to earth. A numerical investigation for this kind of trajectory reveals a wide range of possibilities. Energy gain tables and synodic and resonance interval tables are presented for the gravity-assist trajectories. Tables are presented for the first twenty asteroids on the trajectories. These gravity-assist flybys are compared to direct launch multi-asteroid flybys, illustrating the advantage of the gravity-assist type in launch energy requirements.

Bender, D. F.↗

Flyby- and rendezvous-type comet missions from the standpoint of large-particle dust experiments

The measurement by cometary flyby and rendezvous missions of the dust particles emitted from a cometary nucleus and believed to be the major source of the interplanetary dust is considered. The impact rate per unit area of particles in a given size range on a spacecraft dust sensor is calculated in terms of the distance between comet and probe and the particle emission rate and velocity. It is concluded that large-particle (greater than 100-micron) dust analysis experiments cannot be conducted on flyby missions to short-period comets since the required miss distance is orders of magnitude smaller than the targeting error, while for a rendezvous mission much greater miss distances are possible due to the longer period of cometary contact. The problem of designing dust sensors to operate at the subkilometer per second intercept velocities of a rendezvous mission is also noted.

Sekanina, Z.↗

Modest asteroid or comet flyby mission trajectories

The paper discusses modest comet or asteroid missions which require a launch energy of 20 sq km/sq s or less and allow only navigational post launch delta-V's. Objects with perihelia of 2.0 AU are available directly after an earth launch; this distance is extended to 2.4 AU by a Mars gravity assist and the flyby speeds can be reduced. Twenty-one asteroid targets have been identified for Mars gravity assist trajectories using the 1986 Mars opportunity. Two asteroids on direct trajectories with low asteroid flyby speeds and four Mars gravity assist targets are identified as possible rendezvous targets for launches with capability of carrying the rendezvous delta-V engines.

Bender, D. F.↗

Cometary ephemerides for spacecraft flyby missions

The determination of cometary ephemerides is considered with reference to proposed missions to Comet Halley. It is noted that the ability of spacecraft without onboard navigation capability to fly close to target comets is limited chiefly by the comet's ephemeris uncertainty. The situation is complicated by nongravitational forces acting on a comet's nucleus and the paucity of observers currently making astrometric observations of comets. The nongravitational forces affecting Comet Halley are consistent with the rocket effect of an outgassing water ice nucleus; the nucleus is apparently rotating in a direct sense about a stable spin axis. It is emphasized that accurate Comet Halley ephemerides for close spacecraft flybys will require continued efforts to refine the existing nongravitational force model. In addition, the flyby mission to Comet Halley will require a well-organized network of astrometric observers. For this purpose, an Astrometry Network is being set up within NASA's International Halley Watch program.

Yeomans, D. K.↗

The Mariner Mark II Comet Rendezvous/Asteroid Flyby Mission

The Comet Rendezvous/Asteroid Flyby will be the first mission in the Mariner Mark II program. The July 1990 launch will result in a fast flyby of the asteroid Tanete in May 1991 and a rendezvous with comet Kopff in February 1994, 879 days before comet perihelion. The spacecraft will return detailed data on the comet nucleus and its environment for nearly 1000 days. Several important comet characteristics will not be precisely known until the spacecraft performs its first measurements, which means that operations strategies must be adaptable to a range of conditions. In addition, the operation of a spacecraft in a dusty environment near a low-mass body imposes unique constraints on trajectory and orbit design.

Stetson, D. S.↗

The Comet Rendezvous Asteroid Flyby project

The Comet Rendezvous Asteroid Flyby (CRAF) spacecraft will be provided by the first Mariner Mark II (MMII). The MMII is a modular spacecraft which can be inexpensively reconfigured for different missions beyond the inner solar system. The rationale for a comet rendezvous mission are discussed, taking into account the probability that comets alone retain evidence of the chemical and physical conditions under which all solar system bodies were formed. A description of the rationale for the study of asteroids on the Comet Rendezvous Asteroid Flyby Mission is also presented. On its way to the rendezvous with a comet, the spacecraft will fly by one or more asteroids. It is assumed that the target asteroids will include moderately large main-belt objects several tens to perhaps 100 kilometers in diameter. Attention is also given to mission details, the spacecraft system, and the missions operations system.

Draper, R. F.↗

Manned Mars flyby mission and configuration concept

A concept is presented for a flyby mission of the planet. The mission was sized for the 2001 time period, has a crew of three, uses all propulsive maneuvers, and requires 442 days. Such a flyby mission results in significantly smaller vehicles than would a landing mission, but of course loses the value of the landing and the associated knowledge and prestige. Stay time in the planet vicinity is limited to the swingby trajectory but considerable time still exists for enroute science and research experiments. All propulsive braking was used in the concept due to unacceptable g-levels associated with aerobraking on this trajectory. LEO departure weight for the concept is approximately 594,000 pounds.

Archie Young↗

Orbit determination accuracy assessment for an asteroid flyby - A Galileo case study

The Galileo spacecraft may be targeted for a close flyby of an asteroid on its way to an encounter with Jupiter. An orbit determination accuracy analysis was carried out for the case of the asteroid 29 Amphitrite based on the use of radio metric and optical data types. Prior to encounter, the uncertainty in the asteroid's position, based on astrometric observations from earth, amounts to several hundred kilometers. This ephemeris uncertainty constitutes the dominant error in the determination of the spacecraft orbit with respect to Amphitrite. It is shown that the spacecraft-asteroid relative position can be improved by imaging asteroid-star pairs with the Galileo charge-coupled device (CCD) camera, enabling an accurate flyby of the asteroid. The main benefit of optical navigation is to enable the instrument pointing updates necessary for closeup viewing of the asteroid. A discussion of the evolution of the target error ellipse parameters as a function of data coverage and various combinations of radiometric and optical data types is also presented.

Kechichian, Jean A.↗

Cometary dust size distributions from flyby spacecraft

Pior to the Halley flybys in 1986, the distribution of cometary dust grains with particle size were approximated using models which provided reasonable fits to the dynamics of dust tails, anti-tails, and infrared spectra. These distributions have since been improved using fluence data (i.e., particle fluxes integrated over time along the flyby trajectory) from three spacecraft. The fluence derived distributions are appropriate for comparison with simultaneous infrared photometry (from Earth) because they sample the particles in the same way as the IR data do (along the line of sight) and because they are directly proportional to the concentration distribution in that region of the coma which dominates the IR emission.

Divine, Neil↗