Search NASA⌕ Search

SEARCH · Search NASA

Results for “Follow-Up Studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Effects of X-ray irradiation on human spermatogenesis

Direct cell kill and inhibition of mitosis have been suggested as mechanisms to explain the occurrence of absolute sterility following the irradiation of the testes. In order to obtain information on the existence and dose dependency of the mechanisms for man, a controlled study was initiated. Sixty-four men received a single midorgan dose to both of their testes ranging from 7.5 to 400r (f = .95). It was deduced from resulting pre-sterile period and sterile period data that both cell kill and mitosis halting mechanisms were operating. The maximum observed sterile period was 501 days with eventual recovery observed in each individual where the follow-up was complete. Thus man appears to be highly radiosensitive in regard to temporary sterility but quite radioresistant in regard to permanent sterility.

Thorslund, T. W.↗

Proposed application of lower body negative pressure to cardiology

Potential medical applications are presented of lower body negative pressure to the evaluation and treatment of cardiac patients. The essential features of an LBNP unit and the basic cardiovascular physiology of lower body negative pressure (LBNP) testing are described. Some of the results of previous spaceflight experiences and bedrest studies are summarized. The deconditioning effects of weightlessness experienced by orbiting astronauts are compared with the effects of bedrest restrictions prescribed for convalescing cardiac patients. The potential of LBNP for evaluating both pharmacological and physical activity regimens was examined, particularly in relation to post-myocardial infarction and coronary artery bypass patients. Applications of LBNP to the cardiac catheterization laboratory and the out-patient follow-up of cardiac patients are proposed.

E. V. Schmidt↗

Electrochemical stability of LiMF6 (M = P, As, Sb) in tetrahydrofuran and sulfolane

The electrochemical stability of LiSbF6 and LiPF6 in aprotic organic solvents has been investigated. Electrochemical studies, conductivity measurements, and open-circuit stability tests were conducted on LiSbF6 in tetrahydrofuran and sulfolane. Cyclic voltammetric studies of SbF6(-) were compared with those of AsF6(-) and PF6(-) anions. Sb(V) was reduced to Sb(III), and then to Sb(0). AsF6(-) was reduced to AsF3, while no reduction of PF6(-) was observed. The reduction products of AsF6(-) and SbF6(-) passivated the glassy carbon electrode, presumably due to LiF precipitation. Peak potentials were observed to shift in the positive direction as a function of concentration. This was accounted for on the basis of a follow-up chemical reaction.

Nanjundiah, C.↗

An x-ray search for PMS stars in translucent molecular clouds

The work outlined in this paper identifies 108 plausible T Tauri candidates in the regions of two high latitude translucent molecular clouds. Follow-up optical spectroscopy of these candidates is needed to resolve the question of whether or not star formation is present in these clouds. We have recently submitted a proposal to use the Kitt Peak National Observatory 2.1 meter telescope to take medium resolution spectra of the 14 PMS candidate X-ray sources in MBM 40 to determine spectral types and search for indicators of youth (strong Li absorption; H alpha emission) and we will submit a similar proposal to study the X-ray sources in MBM 55. Only spectra will provide an unambiguous determination of their pedigree. As part of an ongoing study of star formation at high galactic latitude we intend to analyze data in the ROSAT archives to investigate the possibility of star formation in all of the high latitude translucent molecular clouds observed. We believe that this project may yield a significant increase in our understanding of the star formation process for low-mass stars and of the nature of the translucent clouds.

Caillault, Jean-Pierre↗

Microgravity: Teacher's guide with activities for physical science

This guide is an educational tool for teachers of grades 5 through 12. It is an introduction to microgravity and its application to spaceborne laboratory experiments. Specific payloads and missions are mentioned with limited detail, including Spacelab, the International Microgravity Laboratory, and the United States Microgravity Laboratory. Activities for students demonstrate chemistry, mathematics, and physics applications of microgravity. Activity objectives include: modeling how satellites orbit Earth; demonstrating that free fall eliminates the local effects of gravity; measuring the acceleration environments created by different motions; using a plasma sheet to observe acceleration forces that are experienced on board a space vehicle; demonstrating how mass can be measured in microgravity; feeling how inertia affects acceleration; observing the gravity-driven fluid flow that is caused by differences in solution density; studying surface tension and the fluid flows caused by differences in surface tension; illustrating the effects of gravity on the burning rate of candles; observing candle flame properties in free fall; measuring the contact angle of a fluid; illustrating the effects of gravity and surface tension on fiber pulling; observing crystal growth phenomena in a 1-g environment; investigating temperature effects on crystal growth; and observing crystal nucleation and growth rate during directional solidification. Each activity includes a background section, procedure, and follow-up questions.

Vogt, Gregory L.↗

Development of a CFC Critical Area Response (CAR) package

During the past two years, the NASA Marshall Space Flight Center (MSFC) has studied means to improve the transfer of technology from a major federal lab to a significant portion of an industrial segment. In the past, technology transfers had taken place with individual firms, or small groups of firms. This method of 'customized' transfer is often time consuming and can reduce the effectiveness of a response. Thus, a method was achieved to develop a standardized package on replacement of Chlorofluorocarbons (CFC's) that could be sent out to a large number of firms with minimum follow-up.

Mccain, J. Wayne↗

Taguchi methods in electronics: A case study

Total Quality Management (TQM) is becoming more important as a way to improve productivity. One of the technical aspects of TQM is a system called the Taguchi method. This is an optimization method that, with a few precautions, can reduce test effort by an order of magnitude over conventional techniques. The Taguchi method is specifically designed to minimize a product's sensitivity to uncontrollable system disturbances such as aging, temperature, voltage variations, etc., by simultaneously varying both design and disturbance parameters. The analysis produces an optimum set of design parameters. A 3-day class on the Taguchi method was held at the Marshall Space Flight Center (MSFC) in May 1991. A project was needed as a follow-up after the class was over, and the motor controller was selected at that time. Exactly how to proceed was the subject of discussion for some months. It was not clear exactly what to measure, and design kept getting mixed with optimization. There was even some discussion about why the Taguchi method should be used at all.

Kissel, R.↗

Application of airborne infrared technology to monitor building heat loss

The application of airborne infrared technology to the requirements for energy conservation in buildings was studied. Quantitative airborne data of the City of Ypsilanti, Michigan, were collected and processed to identify roof temperatures. A thermal scanner was flown at an altitude of 1,200 feet with two thermal bands 8.2-9.3 micrometers and 10.4-12.5 micrometers recorded by an analog system. Calibration was achieved by standard hot and cold plates. Using a thermal model to interpret ceiling insulation status, environmental factors were found to influence the relation between roof temperature and insulation. These include interior and sky temperatures, roofing materials, and the pitch and orientation of the roof. A follow-up mail survey established the ability to identify insulated and uninsulated houses from the airborne infrared data.

Tanis, F. J.↗

Multiwavelength observations of unidentified high energy gamma ray sources

As was the case for COS B, the majority of high-energy (greater than 100 MeV) gamma-ray sources detected by the EGRET instrument on GRO are not immediately identifiable with cataloged objects at other wavelengths. These persistent gamma-ray sources are, next to the gamma-ray bursts, the least understood objects in the universe. Even a rudimentary understanding of their nature awaits identifications and follow-up work at other wavelengths to tell us what they are. The as yet unidentified sources are potentially the most interesting, since they may represent unrecognized new classes of astronomical objects, such as radio-quiet pulsars or new types of active galactic nuclei (AGN's). This two-year investigation is intended to support the analysis, correlation, and theoretical interpretation of data that we are obtaining at x ray, optical, and radio wavelengths in order to render the gamma-ray data interpretable. According to plan, in the first year concentration was on the identification and study of Geminga. The second year will be devoted to studies of similar unidentified gamma-ray sources which will become available in the first EGRET catalogs. The results obtained so far are presented in the two papers which are reproduced in the Appendix. In these papers, we discuss the pulse profiles of Geminga, the geometry and efficiency of the magnetospheric accelerator, the distance to Geminga, the implications for theories of polar cap heating, the effect of the magnetic field on the surface emission and environment of the neutron star, and possible interpretations of a radio-quiet Geminga. The implications of the other gamma-ray pulsars which were discovered to have high gamma-ray efficiency are also discussed, and the remaining unidentified COS B sources are attributed to a population of efficient gamma-ray sources, some of which may be radio quiet.

Halpern, Jules P.↗

FNAS/solar flare energetics

We have performed an extensive study of solar flare energy buildup and release, concentrating in two aspects: (1) relationship with 3D field topology and measured electric currents; and (2) flare onset characteristics as determined from combined x ray and ultraviolet observations. We extended our previous studies on the characteristic topology of flaring regions, by following the evolution of an active region over three consecutive days. From comparison with flare observations in x rays and h alpha, we found further support for the hypothesis that flares were triggered by taking place at the separators (3D generalization of and x-type neutral point). Furthermore, we found that emerging in flux at a site within the active regions where no (or little) activity was previously observed, caused the appearance of a secondary separator and thereon continuous triggering of activity at such site. Our topology arguments were then applied to a study of sympathetic activity between two regions within an active complex. Here again we found that interacting field structures along separators and separatrices, which act as pathways for recurrent flaring to spread between the regions, could be used to understand how activity spread to potentially explosive sites with the complex. We also finished our study of flare onset characteristics as determined from combined x ray and ultraviolet observations. Using a quasi-static modeling approach, we find that this phase is characterized by a relatively low level of energy release, 10 exp 26-27 erg/s, which is sufficient to produce 'gentle' evaporation, a shift in the location of the transition zone as compared to pre-flare conditions, and an increase in the temperature and density of coronal loops. All these changes have profound implications on the observed signatures of impulsive phase phenomena, which had been neglected in the past. As a follow-up of this investigation, we now plan to apply our results to the interpretation of high-sensitivity spectroscopic and hard x-ray data currently being gathered by the Yohkoh and Compton Gamma Ray Observatory satellites.

Machado, M. E.↗

Cardiovascular effects of weightlessness and ground-based simulation

A large number of animal and human flight and ground-based studies were conducted to uncover the cardiovascular effects of weightlessness. Findings indicate changes in cardiovascular function during simulations and with spaceflight that lead to compromised function on reambulation and/or return to earth. This altered state termed cardiovascular deconditioning is most clearly manifest when in an erect body state. Hemodynamic parameters inidicate the presence of excessive tachnycardia, hypotension (leading to presyncope in one-third of the subjects), decreased heart volume, decreased plasma and circulating blood volumes and loss of skeletal muscle mass, particularly in the lower limbs. No clinically harmful effects were observed to date, but in-depth follow-ups were limited, as was available physiologic information. Available data concerning the causes for the observed changes indicate significant roles for mechanisms involved with body fluid-volume regulation, altered cardiac function, and the neurohumoral control of the control of the peripheral circulation. Satisfactory measures are not found. Return to preflight state was variable and only slightly dependent on flight duration. Future progress awaits availability of flight durations longer than several weeks.

Sandler, Harold↗

Remote sensing of hydrologic variables in boreal areas

During Phase 2 airborne Gamma Radiation measurements were conducted over 48 BOREAS flight lines. Ground measurements of the soil moisture (SM) of the mineral soil and of the depth and water content (WC) of the moss/humus layer were collected for calibration of the flight lines. Special attention has been given to the flight lines over and near the primary tower sites in the southern study area (SSA): Old Black Spruce (OBS), Old Jack Pine, Old Aspen, and Young Aspen. Multiple ground surveys (September 1993; July, August, and September 1994) show the variation of the water content of the moss/humus layers and changes in the amount of standing water near the SSA, OBS tower during the period September 1993 to September 1994. All ground data, airborne estimates and locations of flight lines and ground sampling points have been submitted to BORIS (Boreas Information System). On 8-10 September 1994 exceptionally high values of cosmic radiation were observed by the airborne gamma radiation system over the SSA. Follow-up investigation has not determined the source of, or what caused, the high cosmic count rates.

Peck, Eugene L.↗

Rocket experiments and payloads for Super CAMP

The super Cold Arctic Mesopause Project (CAMP) follow-up project in the summer of 1990 is outlined. In situ measurements of appropriate height resolution are needed in the summer mesosphere at high latitudes to investigate structures and formation processes of polar mesospheric clouds. The rocket measurements from the high latitude site Thule AB in Greenland (76.6 N) are decisive for the understanding of the cold Arctic mesopause. Similar rocket measurements from the European ranges Andenes and Esrange (68 to 69 N) are needed to investigate the latitudinal variability of the parameters relevant for the formation, transport, and loss of mesospheric ice particles. An important aspect of Super CAMP is the study of the heterogeneous chemistry, the loss of electrons on aggregates, and the build-up of horizontal and vertical electric fields in the presence of charged ice particles. Instruments, measurements, and purpose are listed.

Kopp, E.↗

Technical feasibility study for the development of a large capacity wind powered electrical generating system

The engineering feasibility of developing a basic mechanical system necessary for extracting large amounts of power (on the order of 10 to 20 MW) from the wind is considered using the concept of vertical airfoils moving along a closed horizontal track system. Attention is focused on those components necessary for the conversion of wind energy to mechanical energy, although the general characteristics and critical aspects of other components are also considered. The four phases of this program are: (1) Establishment of component specifications and interface requirements for major system components; (2) formulation of alternative sets of conceptual designs for major system components; (3) engineering analysis of various components and systems; and (4) re-examination of basic concept and identification of any desirable follow-up work.

Powe, R. E.↗

The Edison infrared space observatory and the study of extra-solar planetary material

Edison is a proposed large-aperture, radiatively-cooled space observatory planned to operate at wavelengths between 2 and 130 micrometers or longer. Current estimates for the telescope allow an aperture of 1.7 m which will achieve a final equilibrium temperature of about 30 K, although use of cryocoolers may permit temperatures below 20 K. Edison will be a powerful tool to investigate our Solar System, as well as planetary material around distant stars. At near- and mid-infrared wavelengths, where planetary material emits most of its radiation, Edison will be the most sensitive photometric and spectroscopic observatory under current consideration by the space agencies. With its large aperture, Edison will be able both to resolve the structure in nearby circumstellar 'Vega disks' and to discriminate faint IR emission in the crowded environment of the galactic plane. With its long lifetime, Edison will allow extensive follow-up observations and increase the likelihood of catching transient events. We propose Edison as a precursor to elements of a future space-based IR interferometer.

Thronson, H. A., Jr.↗

A study of the effects of disk flexibility on the rotordynamics of the space shuttle main engine turbo-pumps

Rotor dynamical analyses are typically performed using rigid disk models. Studies of rotor models in which the effects of disk flexibility were included indicate that is may be an important effect for many systems. This issue is addressed with respect to the Space Shuttle Main Engine high pressure turbo-pumps. Finite element analyses have been performed for a simplified free-free flexible disk rotor model and the modes and frequencies compared to those of a rigid disk model. The simple model was then extended to a more sophisticated HPTOP rotor model and similar results were observed. Equations were developed that are suitable for modifying the current rotordynamical analysis program to account for disk flexibility. Some conclusions are drawn from the results of this work as to the importance of disk flexibility on the HPTOP rotordynamics and some recommendations are given for follow-up research in this area.

Flowers, George T.↗

Integrating human factors knowledge into certification: The point of view of the Internatioanal Civil Aviation Organization (ICAO)

It is appropriate here to repeat the analogy described in the introduction to this paper which is that: The consideration of human factors requirements during the design stage of advanced, new technology systems may be seen as resting over a three-legged stool. The first leg, the equipment that a system will utilize to achieve its goals, has traditionally attracted ergonomic considerations associated with equipment design, usually centered around 'knobs and dials.' Lately, this view has expanded to include the so-called other important aspect of Human Factor's study which deals with the cognitive, behaviorial and social processes of the human operators. Study in this area must be furthered. The second leg of the stool, the procedures to operate the equipment, however, has been largely unaddressed. Procedures are not inherent to equipment, but must be developed. The importance of proper human factors consideration in the design of procedures can not be overstated. Lastly, the third leg of the stool, the certification of personnel who will operate the equipment, is very much underway, but far from being complete. The real quest now, however, is to integrate these three legs into an indivisible one. Finally, and most importantly, this workshop and its topic are extremely timely in that we are at the dawn of the most ambitious development ever undertaken in international civil aviation. This would allow us the rather unique opportunity to put theory into practice in the near future by ensuring that the concepts developed and furthered by this workshop and the follow-up are implemented in the design and certification of the ICAO future CNS/ATM systems described earlier in this paper. Now is the time to incorporate human factors requirements during the certification processes of these systems. This might act as a test to the feasibility of these ideas. Such endeavors represent a challenge for the research, engineering, training, operational and regulatory communities. But there is certainly more to be gained by attempting to meet the challenge rather than refraining from progress by decrying the difficulties involved.

Maurino, Daniel↗

Automation Bias and Countermeasures in Flight Crews

Results of recent research investigating the use of automated systems have indicated the presence of automation bias, a term describing errors made when decision makers rely on automated cues as a heuristic replacement for vigilant information seeking and processing. Automation commission errors, i.e., errors made when decision makers take inappropriate action because they over-attend to automated information or directives, and automation omission errors, i.e., errors made when decision makers do not take appropriate action because they are not informed of an imminent problem or situation by automated aids, can result from this tendency. In a series of studies, participants who perceived themselves as "accountable" for their strategies of interaction with automation were significantly more likely to verify its correct functioning, and committed significantly fewer automation-related errors than those who did not report this perception. In this study, we focus on two manipulations to encourage verification behaviors within cockpit crews. The first, an information/training manipulation, will focus on explicit information on automation bias, and training for verification of automated functioning. The second manipulation will consist of display prompts to verify automated functioning. Participants (glass-cockpit crews) will fly a series of approaches on the Mini-ACFS, a two-person pan-task flight simulator. Approach scenarios include several automation "events," that is, glitches, malfunctions, or inappropriate recommendations, that can be caught if cross-checked with other cockpit indicators. We anticipate that these manipulations will ameliorate automation bias. Final data analysis will be completed prior to the OSU symposium, and is expected to support the hypotheses that: a) reduced errors are associated with verification behaviors; b) crews will be more likely to verify under training/display conditions than when in the control condition; and c) effects will persist when subjects return for a follow-up exercise 6-9 weeks after their first session. Implications for training and automation design will be discussed.

Mosier, Kathleen, L.↗