Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forest Productivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Heating effects on jack pine pyrogenic organic matter properties from a pyrocosm study in 2022

This dataset contains data associated with the preprint “Fire removes preexisting pyrogenic organic matter from the ecosystem through the mechanisms of both direct combustion and increasing mineralizability” (Luo et al., 2025b), which is the complementary study to the published paper “Reburning pyrogenic organic matter: a laboratory method for dosing dynamic heat fluxes from above” (Luo et al., 2025a). We designed a full-factorial experiment with different burial depths of jack pine (Pinus banksiana Lamb) pyrogenic organic matter (PyOM) (Surface, 1 cm, and 5 cm) and different heat-flux profiles (High, Low, and Control) to examine how subsequent fires affect the properties of preexisting PyOM. We measured total carbon (C), pH, dissolved organic carbon (DOC), dissolved inorganic carbon (DIC), and mineralized C (as CO₂-C, from a 12-week incubation).We found that high heat flux and/or surface placement resulted in substantial direct C losses through combustion. Intermediate heat exposure produced both combustion losses and increases in DOC and mineralizability, which may have complex long-term implications: an increased dissolved fraction of PyOM may promote downward transport into mineral soils and potentially contribute to deeper, longer-term C storage, but it may also make PyOM more susceptible to microbial decomposition. Under the lowest heat flux and deepest burial, most PyOM was retained, and changes in DOC and C mineralization were minimal. Finally, PyOM pH, an important chemical property, decreased under low-temperature heating but increased under higher temperatures.We uploaded pH data for all samples (“pH_of_all_samples.csv”); pH and temperature-related data (peak temperature and degree hours) for samples in High and Low heat-flux treatments (“pH_vs_peakT_and_degree_hours_only_for_heated_samples.csv”); total C data (“CN_pct_C_stock_C_loss_in_samples.csv”); DOC and DIC data (“doc_dic.csv”); and mineralized C (CO₂-C) data (“CO2-C_all_original.csv”). Additional details can be found in the Methods & Sampling section.All datasets uploaded to ESS-DIVE are clearly labeled, cleaned, and include both raw and derived data, ready for reuse in other analyses. All analysis code and raw datasets are also available on GitHub: https://github.com/MengmengLuo/Fire-removes-preexisting-pyrogenic-organic-matter-from-the-ecosystem.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Life cycle assessment of biochar produced from forest residues using portable systems

Forest fires are getting extreme and more frequent because of increased fuel loads in the forest and extended dry conditions. Fuel treatment (i.e., thinning) methods to mitigate forest fires will generate large volumes of forest residues together with available logging residues that can be used to produce biochar. It has been proposed that portable biochar systems are economical means to utilize forest residues as an alternative to slash burning. In this study, the environmental impacts of biochar produced from forest residues using three portable systems [1. Biochar Solutions Incorporated (BSI), 2. Oregon Kiln, and 3. Air-curtain Burner] were evaluated using a cradle-to-gate life-cycle assessment approach. Environmental impacts were analyzed considering the various quality of feedstock, biomass collection methods, different production sites, and various sources of power used in the production of biochar. The results illustrate that the global warming potential (GWP) of biochar production from forest residues through BSI, Oregon Kiln, and Air-Curtain Burner were 0.25–0.31, 0.11, and 0.16 tonne CO 2 eq./tonne of fixed carbon in biochar respectively. Compared to pile burn, biochar production from forest residues with a portable system at the landing, reduced global warming potential (GWP) by 1.92–2.83, 2.7, and 1.9 tonnes CO 2 eq./tonne of biochar through BSI, Oregon Kiln, and Air-Curtain Burner respectively. The Air-Curtain Burner and Oregon Kiln have minimal feedstock preparation, thus have lower environmental impacts than the BSI system. The BSI system requires feedstock preparation and power to operate the system. The use of the biomass-gasifier generator improved the environmental performance substantially (16–280%) compared with a diesel generator in biochar production. Overall, the net GWP in biochar produced (0.10–1.63 tonne CO 2 eq./tonne of residues) from forest residues can reduce environmental impacts (2–40 times lower net CO 2 eq. emissions) compared to slash burning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Litter Production of Oak-Hickory Forest at Missouri Ozark (MOFLUX) Site: 2003-2022

This dataset contains measurements of litter production at the second-growth upland oak-hickory forest at the Missouri Ozark AmeriFlux (MOFLUX) site. The MOFLUX site is located in the University of Missouri Baskett Forest situated in the Ozark Border Region of central Missouri, USA, and is part of the AmeriFlux network (site ID: US-MOz). During 2003, 24 circular vegetation plots (each 0.08 hectares) were established in the MOFLUX forest. The plots were situated 50 meters apart on 5 linear transects radiating out from the flux tower base in southeast, south, southwest, west, and northwest directions—there were 5 plots per transect except for the northwest one, which had only 4 due to the presence of a small pond at the terminus (Fig. 1). Litter measurements were initiated in October 2003 and continue to the present. Data through 2022 are reported in this dataset. On each plot, two subplots were established for the collection of litter. Subplots were setup using a stratified random design to ensure the collectors were not immediately adjacent to one another. Litter collectors were usually emptied at monthly intervals, or less during the autumn leaf drop. Samples were dried to constant mass and then sorted before determining the dry mass of leaf, vegetative and woody litter. These litter data have been valuable in modeling efforts to examine the impacts of intensifying moisture extremes (i.e., moisture excess and deficit conditions) on soil carbon cycling. More recent data will be added periodically with no changes to previously released data or the format and structure of the data file. This dataset contains one data file in comma separate (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest

Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.

Hillslope↗
DOE OSTI2020

Active layer depth and soil properties impact specific leaf area variation and ecosystem productivity in a boreal forest

Specific leaf area (SLA, leaf area per unit dry mass) is a key canopy structural characteristic, a measure of photosynthetic capacity, and an important input into many terrestrial process models. Although many studies have examined SLA variation, relatively few data exist from high latitude, climate-sensitive permafrost regions. We measured SLA and soil and topographic properties across a boreal forest permafrost transition, in which dominant tree species changed as permafrost deepened from 54 to >150 cm over 75 m hillslope transects in Caribou-Poker Creeks Research Watershed, Alaska. We characterized both linear and threshold relationships between topographic and edaphic variables and SLA and developed a conceptual model of these relationships. We found that the depth of the soil active layer above permafrost was significantly and positively correlated with SLA for both coniferous and deciduous boreal tree species. Intraspecific SLA variation was associated with a fivefold increase in net primary production, suggesting that changes in active layer depth due to permafrost thaw could strongly influence ecosystem productivity. While this is an exploratory study to begin understanding SLA variation in a non-contiguous permafrost system, our results indicate the need for more extensive evaluation across larger spatial domains. These empirical relationships and associated uncertainty can be incorporated into ecosystem models that use dynamic traits, improving our ability to predict ecosystem-level carbon cycling responses to ongoing climate change.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Functional but not taxonomic diversity increases productivity of Populus in the southeastern United States

Plant interactions like competition and facilitation impact ecosystem function and resilience. Improving our understanding of the relationships between these interactions and community productivity has important implications for managers of production systems in forestry and agriculture as well as conservation science. Populus spp. are an excellent model system for exploring how inter‐ and intraspecific interactions impact ecosystem functions, such as productivity, in forest plantations. In this study, we compared aboveground productivity of six Populus clones from three different taxa grown in monoclonal and mixed‐clonal plots. The different mixture treatments were intended to experimentally test aboveground biomass response to contrasting levels of taxonomic diversity and functional diversity based on nitrogen use characteristics of Populus clones. We hypothesize that functional diversity would be more important than taxonomic diversity in increasing aboveground productivity of mixed‐clonal plantings compared to monocultures. In addition, a subset of treatments was carried out on additional sites representing a productivity gradient in order to determine if the relationship between biodiversity and productivity in these systems diminished at more productive sites as suggested by the stress‐gradient hypothesis. We found that functionally diverse mixtures of clones had greater yield of aboveground biomass than the average of their constituent monocultures, while more taxonomically diverse mixes of clones did not differ from the average of their constituent monocultures. However, when reestablished on sites with extremely high or low productivity, the best performing clone mixture also did not differ from the average of its constituent monocultures. Our results suggest that intimate clone mixtures of Populus have the potential to significantly increase productivity, but results vary by mixture and by site. To capitalize on positive biodiversity effects on yield in production systems, targeted mixtures based on divergent functional traits linked to different use and acquisition strategies for site‐specific limiting resources are most likely to be successful.

BEF↗
DOE OSTI2025

Enhanced Boundary Layer Height Detection Using Ceilometer, Surface Meteorology, and Radiation Products With a Random Forest Ensemble Method

This study develops and evaluates a Random Forest (RF) model for estimating planetary boundary layer height (PBLH) using 9 years of data from the Atmospheric Radiation Measurement Southern Great Plains (ARM SGP) user facility, with potential application in the NOAA Surface Radiation (SURFRAD) Network. The model integrates ceilometer, surface meteorology, and radiation measurements, and is trained using thermodynamic PBLH estimates derived from radiosondes. This approach aims to bridge gaps between aerosol-based and thermodynamic-based PBLH estimates. The RF model outperformed traditional methods during daytime and better captured transition periods, demonstrating improved accuracy and robustness. At ARM SGP, it showed a substantial reduction in both bias and RMSE, with a bias near zero (−4.9 m) compared with traditional Haar Wavelet (HW) (70.9 m) and Vaisala BL-View software (124.1 m), and an RMSE of 303.2 m, lower than both BL-View (566.9 m) and HW (404.6 m). During daytime hours, RF consistently outperformed both alternatives, maintaining lower bias and RMSE across all periods. At a second evaluation site, RF achieved the lowest overall RMSE (323.7 m), similar to HW (326.4 m) and significantly better than BL-View (738.3 m). However, all models showed reduced accuracy under stable nighttime conditions, limiting the reliability of PBLH estimates. Key predictors for the model included the lifting condensation level height (LCLH), aerosol gradients, and month for seasonal variability. The study underscores the potential of integrating machine learning with multiple data sets such as surface energy and thermodynamic data to advance PBLH estimation.

boundary layer height↗
DOE OSTI2022

Climate Forcing & Feedbacks by Fires, Forests, Fossil Energy & Food Production: Observations are Key to Predictions [Slides]

Human emitted GHGs (long lived, cumulative) that trap more heat (IR) and aerosols (short lived, steady) that reflect sunlight (Vis) have altered Earth’s radiation budget and warmed our climate measurably and predictably. Our complex dynamic climate system has trapped 400 ZettaJ (10 21 ) and has many positive feedbacks. Regions are changing at unprecedented rates and crossing thresholds as BAU will lock us into 8.5 W m -2 in 2100.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Emerging signals of declining forest resilience under climate change

Forest ecosystems depend on their capacity to withstand and recover from natural and anthropogenic perturbations (that is, their resilience). Experimental evidence of sudden increases in tree mortality is raising concerns about variation in forest resilience, yet little is known about how it is evolving in response to climate change. Here we integrate satellite-based vegetation indices with machine learning to show how forest resilience, quantified in terms of critical slowing down indicators, has changed during the period 2000–2020. We show that tropical, arid and temperate forests are experiencing a significant decline in resilience, probably related to increased water limitations and climate variability. By contrast, boreal forests show divergent local patterns with an average increasing trend in resilience, probably benefiting from warming and CO 2 fertilization, which may outweigh the adverse effects of climate change. These patterns emerge consistently in both managed and intact forests, corroborating the existence of common large-scale climate drivers. Reductions in resilience are statistically linked to abrupt declines in forest primary productivity, occurring in response to slow drifting towards a critical resilience threshold. Approximately 23% of intact undisturbed forests, corresponding to 3.32 Pg C of gross primary productivity, have already reached a critical threshold and are experiencing a further degradation in resilience. Together, these signals reveal a widespread decline in the capacity of forests to withstand perturbation that should be accounted for in the design of land-based mitigation and adaptation plans

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Future climate doubles the risk of hydraulic failure in a wet tropical forest

Summary Future climate presents conflicting implications for forest biomass. We evaluate how plant hydraulic traits, elevated CO 2 levels, warming, and changes in precipitation affect forest primary productivity, evapotranspiration, and the risk of hydraulic failure. We used a dynamic vegetation model with plant hydrodynamics (FATES‐HYDRO) to simulate the stand‐level responses to future climate changes in a wet tropical forest in Barro Colorado Island, Panama. We calibrated the model by selecting plant trait assemblages that performed well against observations. These assemblages were run with temperature and precipitation changes for two greenhouse gas emission scenarios (2086–2100: SSP2‐45, SSP5‐85) and two CO 2 levels (contemporary, anticipated). The risk of hydraulic failure is projected to increase from a contemporary rate of 5.7% to 10.1–11.3% under future climate scenarios, and, crucially, elevated CO 2 provided only slight amelioration. By contrast, elevated CO 2 mitigated GPP reductions. We attribute a greater variation in hydraulic failure risk to trait assemblages than to either CO 2 or climate. Our results project forests with both faster growth (through productivity increases) and higher mortality rates (through increasing rates of hydraulic failure) in the neo‐tropics accompanied by certain trait plant assemblages becoming nonviable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Resolving temperature limitation on spring productivity in an evergreen conifer forest using a model–data fusion framework

Abstract. The flow of carbon through terrestrial ecosystems and the response to climate are critical but highly uncertain processes in the global carbon cycle. However, with a rapidly expanding array of in situ and satellite data, there is an opportunity to improve our mechanistic understanding of the carbon (C) cycle's response to land use and climate change. Uncertainty in temperature limitation on productivity poses a significant challenge to predicting the response of ecosystem carbon fluxes to a changing climate. Here we diagnose and quantitatively resolve environmental limitations on the growing-season onset of gross primary production (GPP) using nearly 2 decades of meteorological and C flux data (2000–2018) at a subalpine evergreen forest in Colorado, USA. We implement the CARbon DAta-MOdel fraMework (CARDAMOM) model–data fusion network to resolve the temperature sensitivity of spring GPP. To capture a GPP temperature limitation – a critical component of the integrated sensitivity of GPP to temperature – we introduced a cold-temperature scaling function in CARDAMOM to regulate photosynthetic productivity. We found that GPP was gradually inhibited at temperatures below 6.0 ∘C (±2.6 ∘C) and completely inhibited below −7.1 ∘C (±1.1 ∘C). The addition of this scaling factor improved the model's ability to replicate spring GPP at interannual and decadal timescales (r=0.88), relative to the nominal CARDAMOM configuration (r=0.47), and improved spring GPP model predictability outside of the data assimilation training period (r=0.88). While cold-temperature limitation has an important influence on spring GPP, it does not have a significant impact on integrated growing-season GPP, revealing that other environmental controls, such as precipitation, play a more important role in annual productivity. This study highlights growing-season onset temperature as a key limiting factor for spring growth in winter-dormant evergreen forests, which is critical in understanding future responses to climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Impacts of Forest Fire Ash on Aquatic Mercury Cycling

Mercury (Hg) is a ubiquitous contaminant in the environment and its methylated form, methylmercury (MeHg), poses a worldwide health concern for humans and wildlife, primarily through fish consumption. Global production of forest fire ash, derived from wildfires and prescribed burns, is rapidly increasing due to a warming climate, but their interactions with aqueous and sedimentary Hg are poorly understood. In this study, we compared the differences of wildfire ash with activated carbon and biochar on the sorption of aqueous inorganic Hg and sedimentary Hg methylation. Sorption of aqueous inorganic Hg was greatest for wildfire ash materials (up to 0.21 μg g ₋1 or 2.2 μg g ₋1 C) among all of the solid sorbents evaluated. A similar Hg adsorption mechanism for activated carbon, biochar made of walnut, and wildfire ash was found that involves the formation of complexes between Hg and oxygen-containing functional groups, especially the ₋COO group. Notably, increasing dissolved organic matter from 2.4 to 70 mg C L ₋1 remarkably reduced Hg sorption (up to 40% reduction) and increased the time required to reach Hg–sorbent pseudo-equilibrium. Surprisingly, biochar and wildfire ash, but not activated carbon, stimulated MeHg production during anoxic sediment incubation, possibly due to the release of labile organic matter. Overall, our study indicates that while wildfire ash can sequester aqueous Hg, the leaching of its labile organic matter may promote production of toxic MeHg in anoxic sediments, which has an important implication for potential MeHg contamination in downstream aquatic ecosystems after wildfires.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Intercomparison of Planetary Boundary Layer Heights Using Remote Sensing Retrievals and ERA5 Reanalysis over Central Amazonia

The atmospheric boundary layer height (zi) is a key parameter in the vertical transport of mass, energy, moisture, and chemical species between the surface and the free atmosphere. There is a lack of long-term and continuous observations of zi, however, particularly for remote regions, such as the Amazon forest. Reanalysis products, such as ERA5, can fill this gap by providing temporally and spatially resolved information on zi. In this work, we evaluate the ERA5 estimates of zi (zi-ERA5) for two locations in the Amazon and corrected them by means of ceilometer, radiosondes, and SODAR measurements (zi-experimental). The experimental data were obtained at the remote Amazon Tall Tower Observatory (ATTO) with its pristine tropical forest cover and the T3 site downwind of the city of Manaus with a mixture of forest (63%), pasture (17%), and rivers (20%). We focus on the rather typical year 2014 and the El Niño year 2015. The comparison of the experimental vs. ERA5 zi data yielded the following results: (i) zi-ERA5 underestimates zi-experimental daytime at the T3 site for both years 2014 (30%, underestimate) and 2015 (15%, underestimate); (ii) zi-ERA5 overestimates zi-experimental daytime at ATTO site (12%, overestimate); (iii) during nighttime, no significant correlation between the zi-experimental and zi-ERA5 was observed. Based on these findings, we propose a correction for the daytime zi-ERA5, for both sites and for both years, which yields a better agreement between experimental and ERA5 data. These results and corrections are relevant for studies at ATTO and the T3 site and can likely also be applied at further locations in the Amazon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Accounting for Changes in Radiation Improves the Ability of SIF to Track Water Stress-Induced Losses in Summer GPP in a Temperate Deciduous Forest

Global observations of solar-induced chlorophyll fluorescence (SIF) are available from multiple satellite platforms, and SIF is increasingly used as a proxy for photosynthetic activity and ecosystem productivity. Because the relationship between SIF and gross primary productivity (GPP) depends on a variety of factors including ecosystem type and environmental conditions, it is necessary to study SIF observations across various spatiotemporal scales and ecosystems. To explore how SIF signals relate to productivity over a temperate deciduous forest, we deployed a PhotoSpec spectrometer system at the University of Michigan Biological Station AmeriFlux site (US-UMB) in the northern Lower Peninsula of Michigan during the 2018 and 2019 growing seasons. We found that SIF correlated with GPP across diurnal and seasonal cycles (R 2 = 0.61 and 0.64 for 90-min- and daily-averaged data), but that SIF signals were more strongly related to downwelling radiation than GPP (R 2 = 0.91 for daily-averaged data). The dependence of SIF on radiation obscured the impact of intraseasonal drought in the SIF timeseries, but drought stress was apparent as a decrease in relative SIF, which exhibited a stronger correlation with GPP (R 2 = 0.56) than other remotely sensed data over the drought period. These results highlight the potential of SIF for detecting stress-induced losses in forest productivity. Additionally, we found that the red:far-red SIF ratio did not exhibit a response to water stress-induced losses in productivity, but was largely driven by seasonal and interannual changes in canopy structure, as well as by synoptic changes in downwelling radiation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Metabolic Modification of Sphingobium lignivorans SYK-6 for Lignin Valorization Through the Discovery of an Unusual Transcriptional Repressor of Lignin-Derived Dimer Catabolism

Sphingobium lignivorans SYK-6 catabolizes guaiacylglycerol-..beta..-guaiacyl ether (GGE, a ..beta..-O-4-type dimer) and 1,2-diguaiacylpropane-1,3-diol (DGPD, a ..beta..-1-type dimer) derived from lignin. Recently, SLG_35860 containing TetR- and MarR-type transcriptional regulator motifs was suggested to be involved in the regulation of GGE and DGPD catabolism. Here we investigated the role of SLG_35860 in the transcriptional regulation of GGE and DGPD catabolism genes. SLG_35860 designated ligS repressed 11 genes involved in GGE and DGPD catabolism. LigS binds directly to specific sequences in the promoter region of each gene. The MarR domain was shown to be involved in these bindings; however, GGE, DGPD, and their metabolites did not function as effectors of LigS. We discovered unidentified compound(s) in the black liquor of oxygen-soda anthraquinone pulping of Japanese cedar that SYK-6 cannot metabolize and that acted as effector(s). Therefore, LigS constantly represses the transcription of the GGE and DGPD catabolism genes to low levels. Based on these findings, we examined the productivity of a polymer building block, 2-pyrone-4,6-dicarboxylic acid (PDC), from GGE, DGPD, and a GGE metabolite using an engineered ligS mutant. The rates of PDC production from each compound by this strain were 1.5-6.0 times higher than those of a PDC-producing strain carrying ligS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Biochemical inhibition of acid phosphatase activity in two mountain spruce forest soils

The product inhibition of the 4-Methylumbelliferyl phosphate (MUB-P) decay rate, a measure of potential acid phosphatase activity, has not been considered in most of the published kinetic studies. The aim of this study was to determine the type and strength of the product inhibition in order to better define reaction conditions at which the acid phosphatase activity assay produces unbiased results. The MUB-P decay rate was measured in the forest floor and topsoil organic horizons of two spruce forest catchments at different initial MUB-P and P-PO4 3- concentrations. Furthermore, the type and strength of the inhibition was analyzed by non-linear regression. We found that MUB-P decay was competitively inhibited by the P-PO4 3- but also by dissolved organic P. By using estimated kinetic parameters, we calculated an underestimation of potential acid phosphatase activity by up to ~20% at concentrations of added MUB-P as high as 300 µmol g-1 dry weight and an incubation time one hour due to background inorganic and organic P concentrations in range of units of µmol per gram of dry soil. We discuss approaches that can be used to minimize the underestimation and show that the previously defined recommendations might not be always sufficient to avoid the bias. Therefore, we recommend to analyze progress curves at a wide range of initial MUB-P concentrations using non-linear methods when the enzyme assay is optimized for a given soil. When changes in inorganic and/or organic P concentrations are expected, we further recommend measuring background inorganic and organic P concentrations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Decision Support System

Forest-based value chains involve decisions that begin at the landscape level and extend through processing, product manufacturing, and end-use markets. However, these decisions are often made independently across sectors, with limited visibility into how upstream resource conditions, incentives, and land management choices influence downstream production systems. In forested regions of the United States, wildfire risk, fragmented ownership, and uncertain markets for low-value residues complicate efforts to align extraction, processing, and utilization decisions. Without tools that link these stages, stakeholders may overlook opportunities to improve resource utilization or inadvertently shift impacts elsewhere in the value chain. This repository introduces a decision support system (DSS) that applies a system-impact-analysis approach to forest biomass residues and co-products. The framework integrates forest inventory data, geospatial resource assessments, and economic modeling to evaluate how biomass extraction decisions influence downstream product pathways. By linking regional feedstock avail- ability with market incentives and processing options—such as fuels, wood products, or soil amendments like biochar—the tool allows decision-makers to compare value chain outcomes across multiple utilization strategies.

Davis, Maggie [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2025

A chemical-recovery-free ammonium sulfite-based alkali pretreatment of corn stover for low-cost sugar production via fertilizer use of waste liquor

The production of cellulosic sugars is a pivotal strategy for advancing biomass bioconversion. This study evaluated the pretreatment of corn stover using ammonium sulfite and potassium hydroxide to develop comprehensive data on sugar, lignin, chemicals, and overall mass recovery profiles in a batch reactor at 80 °C. The results indicated significant improvements in delignification, deacetylation, enzymatic digestibility, and overall sugar yield. Specifically, pretreating corn stover with a solution of 40 wt% potassium hydroxide and 15 wt% ammonium sulfite at 80 °C for 2 h achieved 78.9 % lignin removal and 82.1 % acetyl removal, resulting in a total sugar yield exceeding 87.5 % with an enzyme loading of 12.5 mg protein/g-glucan plus xylan. The pretreated spent liquor, containing ammonium, potassium, sulfur, biomass-derived organics, and inorganics, demonstrated substantial potential as a fertilizer. The techno-economic analysis projected a minimum sugar selling price of $0.285 per pound, supporting the ongoing development and implementation of chemical-recovery-free pretreatment technology.

09 BIOMASS FUELS↗