SEARCH · Search NASA

Results for “GSFC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Comparison of GSFC and JPL VLBI modeling software: Benchmark

The Very Long Base Interferometry. The VLBI modeling software packages CALC 6.0 (GSFC) and MASTERFIT (JPL) are compared in some detail. Theoretical model delays are calculated for a set of 120 fictitious observations which involve a variety of sources, baselines, and antennas. Discrepancies between the total delays given by the two programs are of the order of 2 cm (RMS). The modeling of antenna offsets appears to account for approximately half of this difference. Relativistic bending contributions to the delay differ by 3 cm (RMS), and the there appears to be some mutual cancellation of errors involving antenna offsets, bending, and the effects of the two different Solar System ephemerides employed by CALC and MASTERFIT. This cancellation has not been completely characterized here.

Sovers, O. J.↗

NASA NTRS1984

GSFC preferred parts lists PPL-17

A listing of preferred parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center (GSFC) space systems and ground support equipment is contained.

Baldini, B. P.↗

NASA NTRS1986

The GSFC gound-based lidar for the measurement of stratospheric ozone

Concern has risen over the last decade concerning the release of gases into the atmosphere which when photolyzed in the stratosphere can catalyze the destruction of ozone. Although the expected change is only on the order of 5%, significant changes in the vertical profile are anticipated. Predictions at 40 km run as high as a 60% change in the next 50 to 100 years. Because of the importance of ozone in the thermal budget of the atmosphere, such a change will have a direct impact on the earth's climate. Long term monitoring of stratospheric ozone is required to validate the predictions and Differential Absorption Lidar is particularly well suited to this measurement. GSFC is currently constructing a mobile lidar system based on a high powered XeCl excimer laser. The system is expected to be operating by fall 1986 and a campaign to compare the lidar results with a series of ROCOZ flights is planned.

Mcgee, T. J.↗

NASA NTRS1988

The GSFC Flight Support System for on-orbit satellite servicing

To plan and execute a successful on-orbit satellite servicing mission, space support hardware, a serviceable spacecraft design, and flexible ground operations are required. This paper addresses space support hardware and in particular the Goddard Space Flight Center (GSFC) Satellite Servicing Project's (SSP) Flight Support System (FSS). The FSS is designed to be compatible with the Space Transportation System Orbiter and to support on-orbit servicing of Multimission Modular Spacecraft. It provides mechanical, electrical, and thermal support to the spacecraft during the servicing mission. Standardization of spacecraft design, components, and interfaces is required to make a satellite serviceable. Spacecraft ground operation capabilities must accommodate servicing mission requirements. Space support tools and equipment, such as the Power Ratchet Tool, assists the astronaut during time critical EVA operations to more efficiently perform the servicing mission.

Griffin, Thomas J.↗

NASA NTRS1988

Implications of the GSFC Q3 model for trapped particle motion

The Uranus magnetic field model of Connerney et al. (1987), designated GSFC Q3, is used to compute field geometric invariant parameters that determine the adiabatic motion of energetic charged particles trapped in the Uranian magnetosphere, performing computations only for points located along the Voyager 2 flyby trajectory. The L-shell values computed along the Voyager-2 trajectory were compared with L shell values corresponding to the orbital positions for the Uranian satellites Ariel, Umbriel, Miranda, and Titania for a time period centered on the time of the Voyager 2 closest approach to the planet. Bimodal distributions of L minima asociated with the orbital motion of the moons are obtained, thus complicating the model predictions and correlations with charged particle data. The location of charged particle absorption signatures associated with the sweeping effects of the Uranian satellites is reasonably predicted, but significant discrepancies remain which cannot be explained by Q3 model uncertainties.

Acuna, M. H.↗

NASA NTRS1988

GSFC contamination monitors for Space Station

This paper describes the Work Package 3 activities in the area of neutral contamination monitoring for the Space Station. Goddard Space Flight Center's responsibilities include the development of the Attached Payload Accommodations Equipment (APAE), the Polar Orbiting Platform (POP), and the Flight Telerobotic Servicer (FTS). GSFC will also develop the Customer Servicing Facility (CSF) in Phase 2 of the Space Station.

Carosso, P. A.↗

NASA NTRS1989

View graphs for GSFC Colloquium on OFMspert

Viewgraphs providing an overview of activities concerned with the development and testing of the Operator Function Model (OFM) expert system (OFMspert) are presented. The OFM is a mathematical tool for representing operator interaction with predominantly automated space ground control systems. OFM provides cognitive task analysis and served as the basis for the design of an intelligent operator's associate called OMFspert. An experimental implementation of OFMspert, referred to as Ally, was developed. An empirical evaluation of Ally was conducted to determine the effectiveness of a supervisory control team consisting of a human operator and Ally versus a control team consisting of two human operators. The experiment was carried out in the GT-MSOCC (Georgia Tech MultiSatellite Operations Control Center) domain, a research tool consisting of a high fidelity implementation of the operator interface to a GSFC ground control system. The viewgraphs outline the experimental design, operator performance measures, and preliminary results.

Mitchell, Christine M.↗

NASA NTRS1989

Performance and modeling of the GSFC pointing acquisition and tracking system for laser communications

In this paper the NASA Goddard Space Flight Center (GSFC) laser communication pointing, acquisition, and tracking laboratory demonstration program is discussed. This program entails the construction of a flexible brass-board simulation tool, and a supporting computer simulation effort. The result of this program will be a viable test bed to support the design and specification of space-based laser communication terminals and, additionally, to address critical performance issues such as tracking robustness in the presence of background (e.g., stellar or earth) noise and/or internally generated thermal noise.

Fox, N. D.↗

NASA NTRS1992

Recent Goddard Space Flight Center (GSFC) experience with on-orbit calibration of attitude sensors

The results of on-orbit calibration for several satellites by the flight Dynamics Facility (FDF) at GSFC are reviewed. The examples discussed include attitude calibrations for sensors, including fixed-head star trackers, fine sun sensors, three-axis magnetometers, and inertial reference units taken from recent experience with the Compton Gamma Ray observatory, the Upper Atmosphere Research Satellite, and the Extreme Ultraviolet Explorer calibration. The methods used and the results of calibration are discussed, as are the improvements attained from in-flight calibration.

Davis, W.↗

NASA NTRS1993

Station report on the Goddard Space Flight Center (GSFC) 1.2 meter telescope facility

The 1.2 meter telescope system was built for the Goddard Space Flight Center (GSFC) in 1973-74 by the Kollmorgen Corporation as a highly accurate tracking telescope. The telescope is an azimuth-elevation mounted six mirror Coude system. The facility has been used for a wide range of experimentation including helioseismology, two color refractometry, lunar laser ranging, satellite laser ranging, visual tracking of rocket launches, and most recently satellite and aircraft streak camera work. The telescope is a multi-user facility housed in a two story dome with the telescope located on the second floor above the experimenter's area. Up to six experiments can be accommodated at a given time, with actual use of the telescope being determined by the location of the final Coude mirror. The telescope facility is currently one of the primary test sites for the Crustal Dynamics Network's new UNIX based telescope controller software, and is also the site of the joint Crustal Dynamics Project / Photonics Branch two color research into atmospheric refraction.

Mcgarry, Jan F.↗

NASA NTRS1993

Simulation of a data archival and distribution system at GSFC

A version-0 of a Data Archive and Distribution System (DADS) is being developed at GSFC to support existing and pre-EOS Earth science datasets and test Earth Observing System Data and Information System (EOSDIS) concepts. The performance of DADS is predicted using a discrete event simulation model. The goals of the simulation were to estimate the amount of disk space needed and the time required to fulfill the DADS requirements for ingestion (14 GB/day) and distribution (48 GB/day). The model has demonstrated that 4 mm and 8 mm stackers can play a critical role in improving the performance of the DADS, since it takes, on average, 3 minutes to manually mount/dismount tapes compared to less than a minute with stackers. With two 4 mm stackers and two 8 mm stackers, and a single operator per shift, the DADS requirements can be met within 16 hours using a total of 9 GB of disk space. When the DADS has no stacker, and the DADS depends entirely on operators to handle the distribution tapes, the simulation has shown that the DADS requirements can still be met within 16 hours, but a minimum of 4 operators per shift were required. The compression/decompression of data sets is very CPU intensive, and relatively slow when performed in software, thereby contributing to an increase in the amount of disk space needed.

Bedet, Jean-Jacques↗

NASA NTRS1995

NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

Tuey, Richard C.↗

NASA NTRS1996

Automation of satellite operations: Experiences and future directions at NASA GSFC

The current state of satellite operation automation at the NASA Goddard Space Flight Center (GSFC), MD, is described, discussing the short term future and presenting a vision of how automation should be used in future systems. The automation practices currently applied in several current programs are surveyed. The rapidly evolving level of spacecraft autonomy is considered, reviewing how future onboard capabilities will affect ground based automation efforts. The optimum role of automation is discussed and automation principles are presented that can be used to identify favorable opportunities for simplifying and reducing the operating cost of spaceborne science missions.

Hartley, Jonathan B.↗

NASA NTRS1997

GSFC Space Simulation Laboratory Contamination Philosophy: Efficient Space Simulation Chamber Cleaning Techniques

This paper will provide a general overview of the molecular contamination philosophy of the Space Simulation Test Engineering Section and how the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) space simulation laboratory controls and maintains the cleanliness of all its facilities, thereby, minimizing down time between tests. It will also briefly cover the proper selection and safety precautions needed when using some chemical solvents for wiping, washing, or spraying thermal shrouds when molecular contaminants increase to unacceptable background levels.

Roman, Juan A.↗

NASA NTRS1998

The Development of the Joint NASA GSFC and the National Imagery and Mapping Agency (NIMA) Geopotential Model EGM96

The NASA Goddard Space Flight Center (GSFC), the National Imagery and Mapping Agency (NIMA), and The Ohio State University (OSU) have collaborated to develop an improved spherical harmonic model of the Earth's gravitational potential to degree 360. The new model, Earth Gravitational Model 1996 (EGM96), incorporates improved surface gravity data, altimeter-derived gravity anomalies from ERS-1 and from the GEOSAT Geodetic Mission (GM), extensive satellite tracking data-including new data from Satellite Laser Ranging (SLR), the Global Postioning System (GPS), NASA's Tracking and Data Relay Satellite System (TDRSS), the French DORIS system, and the US Navy TRANET Doppler tracking system-as well as direct altimeter ranges from TOPEX/POSEIDON (T/P), ERS-1, and GEOSAT. The final solution blends a low-degree combination model to degree 70, a block-diagonal solution from degree 71 to 359, and a quadrature solution at degree 360. The model was used to compute geoid undulations accurate to better than one meter (with the exception of areas void of dense and accurate surface gravity data) and realize WGS84 as a true three-dimensional reference system. Additional results from the EGM96 solution include models of the dynamic ocean topography to degree 20 from T/P and ERS-1 together, and GEOSAT separately, and improved orbit determination for Earth-orbiting satellites.

Lemoine, F. G.↗

NASA NTRS1999

Developments in Nano-Satellite Structural Subsystem Design at NASA-GSFC

The NASA-GSFC Nano-satellite Technology Development Program will enable flying constellations of tens to hundreds of nano-satellites for future NASA Space and Earth Science missions. Advanced technology components must be developed to make these future spacecraft compact, lightweight, low-power, low-cost, and survivable to a radiation environment over a two-year mission lifetime. This paper describes the efforts underway to develop lightweight, low cost, and multi-functional structures, serviceable designs, and robust mechanisms. As designs shrink, the integration of various subsystems becomes a vital necessity. This paper also addresses structurally integrated electrical power, attitude control, and thermal systems. These innovations bring associated fabrication, integration, and test challenges. Candidate structural materials and processes are examined and the merits of each are discussed. Design and fabrication processes include flat stock composite construction, cast aluminum-beryllium alloy, and an injection molded fiber-reinforced plastic. A viable constellation deployment scenario is described as well as a Phase-A Nano-satellite Pathfinder study.

Rossoni, Peter↗

NASA NTRS1999

GSFC VLBI Analysis Center Annual Report

The GSFC VLBI group, located at NASA's Goddard Space Flight Center in Greenbelt, MD, is a part of the NASA Space Geodesy Program. Since its inception in the mid 1970's, this group has been involved with and been a leader in most aspects of geodetic and astrometric VLBI. Current major activities include coordination of the international geodetic observing program; coordination and analysis of the CORE program; VLBI technique development; and all types of data processing, analysis, and research activities.

Gordon, David↗

NASA NTRS2001

Overview of Selected Light-Weight Mirror Development Programs at GSFC

This paper discusses selected light-weight mirror development programs at GSFC, including development of light-weight, precision, low scatter imaging mirror for ultraviolet applications, foam core mirrors for visible and IR applications, and light-weight SiC mirrors.

Keski-Kuha, Ritva A.↗