Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geometric harmonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

The influence of the secondary electron induced asymmetry on the electrical asymmetry effect in capacitively coupled plasmas

In geometrically symmetric capacitive radio-frequency plasmas driven by two consecutive harmonics, a dc self-bias can be generated as a function of the phase shift between the driving frequencies via the Electrical Asymmetry Effect (EAE). Recently, the Secondary Electron Asymmetry Effect (SEAE) was discovered (Lafleur et al., J. Phys. D: Appl. Phys. 46, 135201 (2013)): unequal secondary electron emission coefficients at both electrodes were found to induce an asymmetry in single-frequency capacitive plasmas. Here, we investigate the simultaneous presence of both effects, i.e., a dual-frequency plasma driven by two consecutive harmonics with different electrode materials. We find that the superposition of the EAE and the SEAE is generally non-linear, i.e., the asymmetries generated by each individual effect do not simply add up at all phases. The control ranges of the dc self-bias and the mean ion energy can be enlarged, if both effects are combined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1971

Electron pitch-angle diffusion driven by oblique whistler-mode turbulence.

A general description of cyclotron harmonic resonant pitch-angle scattering is presented. Quasi-linear diffusion coefficients are prescribed in terms of the wave normal distribution of plasma wave energy. Numerical computations are performed for the specific case of relativistic electrons interacting with a band of low frequency whistler-mode turbulence. A parametric treatment of the wave energy distribution permits normalized diffusion coefficients to be presented graphically solely as a function of the electron pitch-angle. The diffusion coefficients generally decrease with increasing cyclotron harmonic number. Higher harmonic diffusion is insignificant at very small electron pitch-angles, but becomes increasingly important as the pitch-angle increases. One thus expected the rate of pitch-angle scattering to decrease with increasing electron energy, since the resonant value of the latter varies proportionately with harmonic number. This indicates that, in mirror-type magnet field geometrics, such as the earth's radiation belts, the diffusion losses of high energy electrons are likely to be appreciably slower than those at low energy.

Lyons, L. R.↗
DOE OSTI2025

Nonlinear van der Waals Metasurfaces with Resonantly Enhanced Light Generation

Efficient nonlinear wave mixing is of paramount importance for a wide range of applications. However, weak optical nonlinearities pose significant challenges for accessing nonlinear light–matter interaction in compact systems. Here, we experimentally study second harmonic generation in deeply subwavelength 3R-MoS 2 metasurfaces (<λ/13 thick). Our measurements, supported by theoretical analysis, reveal a complex interplay and coupling between geometric resonances, optical extinction, and exciton-driven strong nonlinear susceptibility dispersion. We further demonstrate >150-fold enhancement in second harmonic signal at 740 nm mediated by the A exciton resonance. Additionally, our theoretical studies predict an enhancement of more than 10 6 in second harmonic generation in <100 nm thick structures exhibiting bound states in the continuum resonance. These findings provide insight into accessing and harnessing the unprecedented 3R-MoS 2 nonlinearities at a subwavelength scale, paving the way to ultracompact nonlinear photonic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Generating high-order optical and spin harmonics from ferromagnetic monolayers

High-order harmonic generation (HHG) in solids has entered a new phase of intensive research, with envisioned band-structure mapping on an ultrashort time scale. This partly benefits from a flurry of new HHG materials discovered, but so far has missed an important group. HHG in magnetic materials should have profound impact on future magnetic storage technology advances. Here we introduce and demonstrate HHG in ferromagnetic monolayers. We find that HHG carries spin information and sensitively depends on the relativistic spin–orbit coupling; and if they are dispersed into the crystal momentum k space, harmonics originating from real transitions can be k-resolved and carry the band structure information. Geometrically, the HHG signal is sensitive to spatial orientations of monolayers. Different from the optical counterpart, the spin HHG, though probably weak, only appears at even orders, a consequence of SU(2) symmetry. Our findings open an unexplored frontier—magneto-high-order harmonic generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1988

Geometric angles in cyclic evolutions of a classical system

A perturbative method, using Lie transforms, is given for calculating the Hannay angle for slow, cyclic evolutions of a classical system, taking into account the finite rate of change of the Hamiltonian. The method is applied to the generalized harmonic oscillator. The classical Aharonov-Anandan angle is also calculated. The interpretational ambiguity in the definitions of geometrical angles is discussed.

Bhattacharjee, A.↗
DOE OSTI2021

STUDY OF HARMONIC CRAB CAVITY IN EIC BEAM-BEAM SIMULATIONS

In the Electron-Ion Collider (EIC) design, crab cavities are adopted to compensate the geometric luminosity loss from the crossing angle. From previous studies, higher-order synchro-betatron resonances are excited since the hadron beam is long and the crossing angle is large. To reduce the luminosity degradation rate, different combinations of harmonic crab cavities are studied with both weak-strong and strong-strong simulation methods. The frequency map analysis (FMA) is also used for comparison. This study helps determine the crab cavity parameters for the future EIC.

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

Connecting speeds, directions and arrival times of 22 coronal mass ejections from the sun to 1 AU

Forecasting the in situ properties of coronal mass ejections (CMEs) from remote images is expected to strongly enhance predictions of space weather and is of general interest for studying the interaction of CMEs with planetary environments. We study the feasibility of using a single heliospheric imager (HI) instrument, imaging the solar wind density from the Sun to 1 AU, for connecting remote images to in situ observations of CMEs. We compare the predictions of speed and arrival time for 22 CMEs (in 2008-2012) to the corresponding interplanetary coronal mass ejection (ICME) parameters at in situ observatories (STEREO PLASTIC/IMPACT, Wind SWE/MFI). The list consists of front- and backsided, slow and fast CMEs (up to 2700 km s{sup –1}). We track the CMEs to 34.9 ± 7.1 deg elongation from the Sun with J maps constructed using the SATPLOT tool, resulting in prediction lead times of –26.4 ± 15.3 hr. The geometrical models we use assume different CME front shapes (fixed-Φ, harmonic mean, self-similar expansion) and constant CME speed and direction. We find no significant superiority in the predictive capability of any of the three methods. The absolute difference between predicted and observed ICME arrival times is 8.1 ± 6.3 hr (rms value of 10.9 hr). Speeds are consistent to within 284 ± 288 km s{sup –1}. Empirical corrections to the predictions enhance their performance for the arrival times to 6.1 ± 5.0 hr (rms value of 7.9 hr), and for the speeds to 53 ± 50 km s{sup –1}. These results are important for Solar Orbiter and a space weather mission positioned away from the Sun-Earth line.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1974

A simulation of synthetic aperture radar imaging of ocean waves

A simulation of radar imaging of ocean waves with synthetic aperture techniques is presented. The modelling is simplistic from the oceanographic and electromagnetic viewpoint in order to minimize the computational problems, yet reveal some of the physical problems associated with the imaging of moving ocean waves. The model assumes: (1) The radar illuminates a one-dimensional, one harmonic ocean wave. (2) The scattering is assumed to be governed by geometrical optics. (3) The radar is assumed to be down-looking, with Doppler processing (range processing is suppressed due to the one-dimensional nature of the problem). (4) The beamwidth of the antenna (or integration time) is assumed to be sufficiently narrow to restrict the specular points of the peaks and troughs of the wave. The results show that conventional processing of the image gives familiar results if the ocean waves are stationary. When the ocean wave dispersion relationship is satisfied, the image is smeared due to the motion of the specular points over the integration time. In effect, the image of the ocean is transferred to the near field of the synthetic aperture.

Swift, C. T.↗
NASA NTRS1974

Geodesic synchrotron radiation in the Kerr geometry by the method of asymptotically factorized Green's functions

The scalar, electromagnetic, and gravitational geodesic-synchrotron-radiation (GSR) spectra are determined for the case of a test particle moving on a highly relativistic circular orbit about a rotating (Kerr) black hole. It is found that the spectral shape depends only weakly on the value of the angular-momentum parameter (a/M) of the black hole, but the total radiated power drops unexpectedly for a value of at least 0.95 and vanishes as the value approaches unity. A spin-dependent factor (involving the inner product of the polarization of a radiated quantum with the source) is isolated to explain the dependence of the spectral shape on the spin of the radiated field. Although the scalar wave equation is solved by separation of variables, this procedure is avoided for the vector and tensor cases by postulating a sum-over-states expansion for the Green's function similar to that found to hold in the scalar case. The terms in this sum, significant for GSR, can then be evaluated in the geometric-optics approximation without requiring the use of vector or tensor spherical harmonics.

Chrzanowski, P. L.↗
NASA NTRS2000

Comparison of Analytical and CAA Solution(s): Unsteady Response of a Rectilinear Swept Cascade to an Incident Gust

This problem is aimed at testing the ability of computational aeroacoustic methods to calculate the acoustic pressure field generated as a result of the interaction of a convected harmonic gust with a rectilinear cascade of swept flat plates. All relevant geometric information is the same as the unsteady response of an isolated finite span swept airfoil to an incident gust problem with the exception of the sweep angle alpha, which is now taken to be a variable. Assume a cascade stagger angle of zero (with the x-axis aligned with the chord) and a gap-to-chord ratio of h/c = 1. The mean flow Mach number M(sub 0), gust frequency omega, gust amplitude A, and chordwise wavenumber k(sub x) are the same. But for the cascade problem take k(sub y) = pi and k(sub z) = 0. The appropriate physical scales are also the same, as is the governing equation and boundary conditions. Naturally, the impermeability condition now applies to the entire cascade. For this problem, determine the amplitude of upstream-radiated rms acoustic pressure as a function of the sweep angle at the specified frequency. Specifically, show the variations of rms acoustic pressure amplitude at the upstream location (-5c, 0, l/2) for sweep angle alpha in the range (0.0 deg, 30.0 deg). Use sweep angle increments no larger than 2.5 deg. Express the results in dB using the rms pressure value for alpha = 0.0 deg as the reference level. The appropriate FORTRAN output statement should read "WRITE(IUNIT,*) alpha, 20-log10 (p(sub rms)(alpha)/p(sub rms)(0))".

Envia, Edmane↗
DOE OSTI2021

A machine learning-based interaction force model for non-spherical and irregular particles in low Reynolds number incompressible flows

In this study, interaction force of non-spherical particles in low Reynolds number gas-solid flow is investigated by neural network approaches. An artificial neural network (ANN) model is developed to correlate the non-spherical particle shape and the flow conditions with the interaction force. To define the particle shape, spherical harmonic expansion is applied. Furthermore, variational autoencoder model is then used to extract latent geometric features. The latent vector is utilized as an input with the Reynolds number for the ANN. The interaction force data, which is used as output data of the ANN, is obtained by particle resolved direct numerical simulation for 5200 non-spherical particles. The proposed model enables unsupervised extraction for non-spherical particle shapes and accurate predictions on the interaction force without heavy computation. This study provides the model that can explain complicated shapes of particles and be applied to a large scale, computational fluid dynamics simulation.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2011

ARRIVAL TIME CALCULATION FOR INTERPLANETARY CORONAL MASS EJECTIONS WITH CIRCULAR FRONTS AND APPLICATION TO STEREO OBSERVATIONS OF THE 2009 FEBRUARY 13 ERUPTION

One of the goals of the NASA Solar TErestrial RElations Observatory (STEREO) mission is to study the feasibility of forecasting the direction, arrival time, and internal structure of solar coronal mass ejections (CMEs) from a vantage point outside the Sun-Earth line. Through a case study, we discuss the arrival time calculation of interplanetary CMEs (ICMEs) in the ecliptic plane using data from STEREO/SECCHI at large elongations from the Sun in combination with different geometric assumptions about the ICME front shape [fixed-{Phi} (FP): a point and harmonic mean (HM): a circle]. These forecasting techniques use single-spacecraft imaging data and are based on the assumption of constant velocity and direction. We show that for the slow (350 km s{sup -1}) ICME on 2009 February 13-18, observed at quadrature by the two STEREO spacecraft, the results for the arrival time given by the HM approximation are more accurate by 12 hr than those for FP in comparison to in situ observations of solar wind plasma and magnetic field parameters by STEREO/IMPACT/PLASTIC, and by 6 hr for the arrival time at Venus Express (MAG). We propose that the improvement is directly related to the ICME front shape being more accurately described by HM for an ICME with a low inclination of its symmetry axis to the ecliptic. In this case, the ICME has to be tracked to >30{sup 0} elongation to obtain arrival time errors < {+-} 5 hr. A newly derived formula for calculating arrival times with the HM method is also useful for a triangulation technique assuming the same geometry.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Nonlinear ultrasonic technique for the characterization of microstructure in additive materials

This study employs nonlinear ultrasonic techniques to track microstructural changes in additively manufactured metals. The second harmonic generation technique based on the transmission of Rayleigh surface waves is used to measure the acoustic nonlinearity parameter, β. Stainless steel specimens are made through three procedures: traditional wrought manufacturing, laser-powder bed fusion, and laser engineered net shaping. The β parameter is measured through successive steps of an annealing heat treatment intended to decrease dislocation density. Dislocation density is known to be sensitive to manufacturing variables. In agreement with fundamental material models for the dislocation-acoustic nonlinearity relationship in the second harmonic generation, β drops in each specimen throughout the heat treatment before recrystallization. Geometrically necessary dislocations (GNDs) are measured from electron back-scatter diffraction as a quantitative indicator of dislocations; average GND density and β are found to have a statistical correlation coefficient of 0.852 showing the sensitivity of β to dislocations in additively manufactured metals. Moreover, β shows an excellent correlation with hardness, which is a measure of the macroscopic effect of dislocations.

42 ENGINEERING↗
DOE OSTI2025

Geometric adiabatic angle in anisotropic oscillators

We discuss a classical anisotropic oscillator and the Foucault pendulum as examples illustrating non-conservation of action variables in integrable classical mechanical systems with adiabatically slow evolution. We also emphasize the importance of the mass parameter of a harmonic oscillator, alongside its frequency, in explicitly time-dependent situations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

3D spherical functional expansion tallies in Serpent 2 Monte Carlo code

This work extends the application of functional expansion tallies to 3D spherical geometries. The 3D Zernike polynomials are set as an orthonormal polynomials basis for the functional reconstruction. The study describes the construction of the complete set of polynomials, a natural expansion of the spherical harmonics polynomials where 3D Zernike moments can be evaluated as a linear combination of the geometrical moments. The 3D Zernike polynomials formulation and the computational approach implemented in Serpent 2 are presented and tested through the Godiva model from the ICSBEP criticality benchmark test cases. The implementation results are in agreement with a reference solution described in a fine-resolution mesh, enhancing also the performance and memory demand. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2015

Parasitic effects in superconducting quantum interference device-based radiation comb generators

We study several parasitic effects on the implementation of a Josephson radiation comb generator based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. This system can be used as a radiation generator similarly to what is done in optics and metrology, and allows one to generate up to several hundreds of harmonics of the driving frequency. First we take into account how the assumption of a finite loop geometrical inductance and junction capacitance in each SQUID may alter the operation of the devices. Then, we estimate the effect of imperfections in the fabrication of an array of SQUIDs, which is an unavoidable source of errors in practical situations. We show that the role of the junction capacitance is, in general, negligible, whereas the geometrical inductance has a beneficial effect on the performance of the device. The errors on the areas and junction resistance asymmetries may deteriorate the performance, but their effect can be limited to a large extent by a suitable choice of fabrication parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2015

Energy and Spectroscopic Characterization of the Isomers of C4H3-, C6H3-, and C6H5-

Organic and inorganic molecules, neutral and ions have been observed in the interstellar medium. A few anions of organic molecules have also been observed recently. The Cassini spacecraft in the upper atmosphere of Titan has observed anions of large organic molecules. In this project we have studied the physical and spectroscopic properties of C4H3-, C6H3-, and C6H5-. We have optimized the geometrical structures of all low-lying isomers of the anions, calculated rotational, and harmonic vibrational frequencies of the anions mentioned above using the B3LYP density functional along with the augmented correlation consistent polar valence triple zeta (aug-cc-pVTZ) basis set. We have found many low-lying isomers on the potential energy surface of these anions.

Energy↗
DOE OSTI2015

Toward adaptive radiotherapy for head and neck patients: Uncertainties in dose warping due to the choice of deformable registration algorithm

Purpose: The aims of this work were to evaluate the performance of several deformable image registration (DIR) algorithms implemented in our in-house software (NiftyReg) and the uncertainties inherent to using different algorithms for dose warping. Methods: The authors describe a DIR based adaptive radiotherapy workflow, using CT and cone-beam CT (CBCT) imaging. The transformations that mapped the anatomy between the two time points were obtained using four different DIR approaches available in NiftyReg. These included a standard unidirectional algorithm and more sophisticated bidirectional ones that encourage or ensure inverse consistency. The forward (CT-to-CBCT) deformation vector fields (DVFs) were used to propagate the CT Hounsfield units and structures to the daily geometry for “dose of the day” calculations, while the backward (CBCT-to-CT) DVFs were used to remap the dose of the day onto the planning CT (pCT). Data from five head and neck patients were used to evaluate the performance of each implementation based on geometrical matching, physical properties of the DVFs, and similarity between warped dose distributions. Geometrical matching was verified in terms of dice similarity coefficient (DSC), distance transform, false positives, and false negatives. The physical properties of the DVFs were assessed calculating the harmonic energy, determinant of the Jacobian, and inverse consistency error of the transformations. Dose distributions were displayed on the pCT dose space and compared using dose difference (DD), distance to dose difference, and dose volume histograms. Results: All the DIR algorithms gave similar results in terms of geometrical matching, with an average DSC of 0.85 ± 0.08, but the underlying properties of the DVFs varied in terms of smoothness and inverse consistency. When comparing the doses warped by different algorithms, we found a root mean square DD of 1.9% ± 0.8% of the prescribed dose (pD) and that an average of 9% ± 4% of voxels within the treated volume failed a 2%pD DD-test (DD{sub 2%-pp}). Larger DD{sub 2%-pp} was found within the high dose gradient (21% ± 6%) and regions where the CBCT quality was poorer (28% ± 9%). The differences when estimating the mean and maximum dose delivered to organs-at-risk were up to 2.0%pD and 2.8%pD, respectively. Conclusions: The authors evaluated several DIR algorithms for CT-to-CBCT registrations. In spite of all methods resulting in comparable geometrical matching, the choice of DIR implementation leads to uncertainties in dose warped, particularly in regions of high gradient and/or poor imaging quality.

60 APPLIED LIFE SCIENCES↗