Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hall measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hall effect in gated single-wall carbon nanotube films

The presence of hopping carriers and grain boundaries can sometimes lead to anomalous carrier types and density overestimation in Hall-effect measurements. Previous Hall-effect studies on carbon nanotube films reported unreasonably large carrier densities without independent assessments of the carrier types and densities. Here, we have systematically investigated the validity of Hall-effect results for a series of metallic, semiconducting, and metal–semiconductor-mixed single-wall carbon nanotube films. With carrier densities controlled through applied gate voltages, we were able to observe the Hall effect both in the n- and p-type regions, detecting opposite signs in the Hall coefficient. By comparing the obtained carrier types and densities against values derived from simultaneous field-effect-transistor measurements, we found that, while the Hall carrier types were always correct, the Hall carrier densities were overestimated by up to four orders of magnitude. This significant overestimation indicates that thin films of one-dimensional SWCNTs are quite different from conventional hopping transport systems.

42 ENGINEERING↗
DOE OSTI2020

Spin phase diagram of the interacting quantum Hall liquid

Measurement of the ground-state spin polarization of quantum systems offers great potential for the discovery and characterization of correlated electronic states. However, spin polarization measurements have mainly involved optical and NMR techniques that perturb the delicate ground states and, for quantum Hall systems, have provided conflicting results. In this work we present spin-resolved pulsed tunnelling (SRPT) that precisely determines the phase diagram of the ground-state spin polarization as a function of magnetic field and Landau level (LL) filling factor ($ν$) with negligible perturbation to the system. Our phase diagram shows a variety of polarized, unpolarized and topological spin states in the lowest (N = 0) LL, which can largely be described by a weakly interacting composite fermion (CF) model7. However, the phase diagram shows unexpected behaviour in the N = 1 LL. We observe fully polarized $ν$ = 5/2 and 8/3 states but a partially depolarized $ν$ = 7/3 state. This behaviour deviates from the conventional theoretical picture of weakly interacting fractional quasiparticles, but instead suggests unusual electronic correlations and the possibility of new non-Abelian phases. The results establish SRPT as a powerful technique for investigating correlated electron phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Thermoelectric properties of SnSe and SnSe 2 single crystals

Thermoelectric materials can serve for conversion between thermal and electrical energy. In the search for new thermoelectric materials, layered SnSe and SnSe 2 are promising candidates. Here we have successfully synthesized SnSe and SnSe 2 single crystals by the modified Bridgman method and studied their thermoelectric properties: thermopower (S), thermal conductivity (κ), and electrical conductivity (σ) in the temperature range between 2 K and 400 K, which are absent in the literature. In particular, the kink observed in the thermopower corresponds to the metallic-nonmetallic crossover temperature for both SnSe and SnSe 2 , reflecting their inherent electronic nature. Compared to SnSe 2 above 100 K, we find that SnSe exhibits higher electrical conductivity, higher thermopower, and lower thermal conductivity, thus resulting in the higher figure of merit. Hall effect measurements reveal that the Hall mobility in SnSe is an order higher than that in SnSe 2 , advancing its thermoelectric performance. These experimental results are supported by first principles calculations, which indicate that the inequivalent Sn-Se bonding lengths help improve the figure of merit of SnSe.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Assessment of errors in analytic modeling of permanent magnet electron spectrometers for laser-plasma accelerators

Here, we assess the error in three treatments of a critical electron beam diagnostic for laser-plasma acceleration (LPA) experiments: a permanent magnet electron spectrometer. Since LPA electron spectrometers are often difficult to calibrate due to the scarcity of well-characterized, tunable electron beam sources in the appropriate energy range and the mechanical complexity of electron spectrometers, the standard of calibration is Hall probe measurements. We first compare the electron spectrometer performance between SIMION calculations and the Hall probe measurements. We find up to a 60% (<8%) error in determining the absolute energy for electrons below (above) 80 MeV when using the SIMION-modeled magnetic field vs the measured magnetic field due to SIMION overpredicting fringe field strength. The difference in spectrometer energy resolution is within ∼10% between the modeled and measured fields. We then assess a simple block model, which is commonly used. We find that the simple block model presented here sufficiently captures the predicted as-built spectrometer performance for any application provided that the user can tolerate uncertainties on absolute energy determination up to 5% and errors on energy resolution up to 1%.

Electromagnetic optics↗
DOE OSTI2025

Defect levels and self-compensation in iodine-doped CdTe single crystals

This study systematically documents defect levels in n-type iodine-doped cadmium telluride (CdTe:I) crystals as measured by thermoelectric effect spectroscopy, Hall-effect measurements, and photoluminescence and calculated by density functional theory. The primary donor, I Te , was identified with an activation energy of ∼0.05 eV (measured)/∼0.13 eV (calculated). Deep acceptor states, V Cd and I Te –V Cd complex, exhibited activation energies of ∼0.1 eV (measured)/∼0.19 eV (calculated) and ∼0.12 eV (measured)/∼0.24 eV (calculated), respectively. Self-compensation and Fermi level pinning were observed at ∼0.7 eV (measured)/∼1.08 eV (calculated), contributing to high resistivity in as-grown samples. Post-growth Cd annealing effectively removes compensation centers, releases iodine donors, and significantly reduces resistivity, resulting in an ideal n-type solar cell material.

Cd annealing↗
DOE OSTI2022

Direct current magnetic Hall probe technique for measurement of field penetration in thin film superconductors for superconducting radio frequency resonators

Superconducting Radio Frequency (SRF) cavities used in particle accelerators are typically formed from or coated with superconducting materials. Currently, high purity niobium is the material of choice for SRF cavities that have been optimized to operate near their theoretical field limits. This brings about the need for significant R & D efforts to develop next generation superconducting materials that could outperform Nb and keep up with the demands of new accelerator facilities. To achieve high quality factors and accelerating gradients, the cavity material should be able to remain in the superconducting Meissner state under a high RF magnetic field without penetration of quantized magnetic vortices through the cavity wall. Therefore, the magnetic field at which vortices penetrate a superconductor is one of the key parameters of merit of SRF cavities. Techniques to measure the onset of magnetic field penetration on thin film samples need to be developed to mitigate the issues with the conventional magnetometry measurements that are strongly influenced by the film orientation and shape and edge effects. In this work, we report the development of an experimental setup to measure the field of full flux penetration through films and multi-layered superconductors. Our system combines a small superconducting solenoid that can generate a magnetic field of up to 500 mT at the sample surface and three Hall probes to detect the full flux penetration through the superconductor. We report this setup can be used to study alternative materials that could potentially outperform niobium, as well as superconductor–insulator–superconductor (SIS) multilayer coatings on niobium.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Structural, Electrical, and Optical Properties of Single-Walled Carbon Nanotubes Synthesized through Floating Catalyst Chemical Vapor Deposition

Single-walled carbon nanotube (SWCNT) thin films were synthesized by using a floating catalyst chemical vapor deposition (FCCVD) method with a low flow rate (200 sccm) of mixed gases (Ar and H 2 ). SWCNT thin films with different thicknesses can be prepared by controlling the collection time of the SWCNTs on membrane filters. Transmission electron microscopy (TEM) showed that the SWCNTs formed bundles and that they had an average diameter of 1.46 nm. The Raman spectra of the SWCNT films suggested that the synthesized SWCNTs were very well crystallized. Although the electrical properties of SWCNTs have been widely studied so far, the Hall effect of SWCNTs has not been fully studied to explore the electrical characteristics of SWCNT thin films. In this research, Hall effect measurements have been performed to investigate the important electrical characteristics of SWCNTs, such as their carrier mobility, carrier density, Hall coefficient, conductivity, and sheet resistance. The samples with transmittance between 95 and 43% showed a high carrier density of 10 21– 10 23 cm –3 . The SWCNTs were also treated using Brønsted acids (HCl, HNO 3 , H 2 SO 4 ) to enhance their electrical properties. After the acid treatments, the samples maintained their p-type nature. The carrier mobility and conductivity increased, and the sheet resistance decreased for all treated samples. The highest mobility of 1.5 cm 2 /Vs was obtained with the sulfuric acid treatment at 80 °C, while the highest conductivity (30,720 S/m) and lowest sheet resistance (43 ohm/square) were achieved with the nitric acid treatment at room temperature. Different functional groups were identified in our synthesized SWCNTs before and after the acid treatments using Fourier-Transform Infrared Spectroscopy (FTIR).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic and transport properties of amorphous, B 2 and L 2 1 Co 2 MnGa thin films

We have studied the magnetic and transport properties of Co 2 MnGa (CMG) thin films grown on MgO(100) substrates in terms of their chemical evolution from amorphous to ordered L 2 1 phases at the substrate temperature T s during the thin film deposition. Interestingly, the chemical order and magnetic properties sharply change depending on T s . The CMG film deposited at T s = 550 °C exhibits the L 2 1 -ordered structure and the magnetization of 3.5 μ B /f.u., while the CMG film deposited at T s = 300 °C shows a B 2-ordered structure and a relatively lower magnetization of 3 μ B /f.u., possibly due to the Mn–Mn antiferromagnetic interactions. A metallic behavior of the electrical resistivity appeared in the CMG film deposited at T s = 550 °C, whereas the semiconducting behavior appeared in the CMG films deposited at 300 °C and room temperature. Moreover, we found that the absolute value of α = d(Δ ρ )/d( T 1/2 ) in the low-temperature range below about 20 K is a measure to evaluate the degree of the chemical disorder. In a Hall effect measurement, the L 2 1 -ordered CMG film obtained at T s = 550 °C shows a sizable anomalous Hall resistivity of 15 µ Ω cm. This study unveils the relation between T s and atomic ordering, providing a new pathway for optimizing the chemical order.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Efficacy of the Method of Four Coefficients to Determine Charge-Carrier Scattering

The investigation of the electronic properties of semiconductors from transport measurements (i.e., resistivity, Hall, and Seebeck coefficient measurements) is challenging due to the averaging of charge-carrier dynamics inherent in such measurements. Here, we investigate the incorporation of a fourth measurement of electronic transport, the Nernst coefficient, into the analysis, termed the method of four coefficients. This approach yields the Fermi level, effective mass, scattering exponent, and relaxation time prefactor. We begin with a review of the underlying mathematics and investigate the mapping between the four-dimensional material property and transport coefficient spaces. We then investigate how the traditional single-parabolic band method yields a single, potentially incorrect point on the solution subspace. This uncertainty can be resolved through Nernst coefficient measurements and we map the span of the ensuing subspace. We conclude with an investigation of how sensitive the analysis of transport coefficients is to experimental error for different sample types.

charge carriers↗
DOE OSTI2025

Observation of anomalous thermal Hall effect in a Kagome superconductor

Broken time-reversal symmetry (TRS) in superconductors can induce not only spontaneous magnetization by the finite angular momentum of Cooper pairs but also the anomalous thermal Hall effects (ATHEs), whose detection has been extremely challenging. Here, we report the successful observation of an ATHE developing below the superconducting transition temperature at zero magnetic field in the kagome-lattice superconductor CsV 3 Sb 5 . This finding is verified by the absence of a signal in a conventional type-II superconductor using the same setup and by ruling out the trapped-vortex effects through micro-Hall array measurements. Both the temperature dependence and the magnitude of the observed anomalous thermal Hall conductivity are quite different from those expected for the quantized thermal edge current of an intrinsic ATHE but consistent with extrinsic impurity-induced ATHEs in chiral superconductivity. Our study of ATHE offers an alternative approach to probe TRS breaking in the superconducting states.

Yoshida, Hiroki [Univ. of Tokyo, Chiba (Japan)] (O↗
DOE OSTI2023

Anomalous cross-field transport in a Hall thruster inferred from direct measurement of instability growth rates

The contribution of the electron drift instability to anomalous electron transport is experimentally assessed in a Hall effect discharge. The transport is represented by an anomalous collision frequency, which is related through quasilinear theory to the energy and growth rate of the instability. The wave energy is measured directly with ion saturation probes, while estimates of the growth rate are employed based on both linearized theory and direct measurement. The latter measurement is performed with a bispectral analysis method. The wave-driven collision frequency is compared to measurements of the actual collision frequency inferred from a method based on laser- induced fluorescence. It is found that estimates for transport using linearized theory for the growth differ by over an order of magnitude from the actual anomalous collision frequency in the plasma. The wave-driven anomalous collision frequency with measured growth, however, is shown to agree with the electron collision frequency in magnitude and capture aspects of the trends in spatial variation. This result demonstrates experimentally that wave-driven effects ultimately can explain the observed cross-field transport in these devices. As a result, the implications of this finding are discussed in the context of the key lengthscales that drive the transport as well as the implications identifying reduced fidelity models that could be used to predict anomalous collision frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Chiral edge state control of thermoelectric effects

Thermoelectric responses in two-dimensional electron gases subjected to magnetic fields have the potential to provide unique information about quasiparticle statistics. In this study, we show that chiral edge states play a key role in thermoelectric Hall bar measurements by completely controlling the direction of the internal thermal gradient. To this end, we perform measurements of the magnetothermoelectric responses of cadmium arsenide quantum wells. The magnetothermoelectric responses in the quantum Hall regime agree with theoretical predictions if one considers the role of chiral edge states, which flow in opposite directions on either side of the Hall bar and establish an internal temperature gradient that is perpendicular to the externally applied thermal gradient. We show that the results are self-consistent within this picture under different measurement conditions. We discuss potential applications of the findings, such as in nanoscale control of local temperature gradients and thermoelectric effects along with the characterization of other topological systems with chiral edges states.

Science & Technology - Other Topics↗
DOE OSTI2022

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Structural, magnetic and electrical transport properties of YMnAl

The intermetallic compound YMnAl, crystallizing in the cubic C-15 (MgCu 2 -type) structure, was prepared using arc-melting and annealing. Rietveld refinement of the XRD pattern yields a lattice parameter of a = 7.816(1) Å⁠. The system exhibits antiferromagnetic order with a transition temperature of approximately 38 K, along with indications of a spin-glass–like phase. The effective magnetic moment, estimated from Curie–Weiss fitting of the susceptibility versus temperature curve, is 6.06 μ B /f.u. and the Curie–Weiss temperature of −79 K confirming the antiferromagnetic nature. Isothermal magnetization measurements below and above the Néel temperature show no saturation, with a maximum magnetization of 0.09 μ B /f.u observed at an applied field of 9 T. The temperature dependence of resistivity exhibits a negative temperature coefficient, characteristic of dirty metals. Hall effect measurements indicate the absence of an anomalous Hall contribution. The Hall coefficient RH, carrier concentration n, and mobility μ estimated from R XY (H) are -1.05×10 -8 m 3 /C, 5.92×10 26 m -3 and 1.05×10 -3 m 2 /V.s, respectively. Our first-principles calculations indicate that YMnAl in the orthorhombic (Imma) structure has the lowest energy; however, the substitutional disorder occurring during experimental synthesis may favor the formation of the cubic Laves phase.

Crystallography↗
DOE OSTI2020

Phase diagram of infinite layer praseodymium nickelate Pr 1– x Sr x NiO 2 thin films

In this paper, we report the phase diagram of infinite layer Pr 1-x Sr x NiO 2 thin films synthesized via topotactic reduction from the perovskite precursor phase using CaH 2 . Based on the electrical transport properties, we find a doping-dependent superconducting dome extending between x = 0.12 and 0.28, with a maximum superconducting transition temperature T c of 14 K at x = 0.18, bounded by weakly insulating behavior on both sides. In contrast to the narrower dome observed in Nd 1–x Sr x NiO 2 , a local T c suppression near x = 0.2 was not observed for the Pr 1-x Sr x NiO 2 system. Normal state Hall effect measurements indicate mixed carrier contributions of both electrons and holes, and show a sign change in the Hall coefficient as functions of temperature and x, quite similar to that in Nd 1-x Sr x NiO 2 . Also similar is the observation of a minimum in the normal state resistivity associated with the superconducting compositions. These findings indicate an infinite layer nickelate phase diagram that is relatively insensitive to the rare-earth element, but suggest that disorder arising from the variations of the ionic radii on the rare-earth site affects the superconducting dome.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Device and material investigations of GaN enhancement-mode transistors for Venus and harsh environments

This Letter reports the device and material investigations of enhancement-mode p-GaN-gate AlGaN/GaN high electron mobility transistors (HEMTs) for Venus exploration and other harsh environment applications. The GaN transistor in this work was subjected to prolonged exposure (11 days) in a simulated Venus environment (460 °C, 94 bar, complete chemical environment including CO2/N2/SO2). The mechanisms affecting the transistor performance and structural integrity in harsh environment were analyzed using a variety of experimental, simulation, and modeling techniques, including in situ electrical measurement (e.g., burn-in) and advanced microscopy (e.g., structural deformation). Through transistor, Transmission Line Method (TLM), and Hall-effect measurements vs temperature, it is revealed that the mobility decrease is the primary cause of reduction of on-state performance of this GaN transistor at high temperature. Material analysis of the device under test (DUT) confirmed the absence of foreign elements from the Venus atmosphere. No inter-diffusion of the elements (including the gate metal) was observed. The insights of this work are broadly applicable to the future design, fabrication, and deployment of robust III-N devices for harsh environment operation.

Physics↗