Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Synergy of Ion Doping and Spiral Array Architecture on Ti 2 Nb 10 O 29 : A New Way to Achieve High-Power Electrodes

Ameliorating electronic/ionic transport and structural stability of electrode materials is important to the development of power-intensive lithium ion batteries. Despite its great potential as a high-power anode, titanium niobium oxide (Ti 2 Nb 10 O 29 , TNO) still underperforms due to its unsatisfactory electronic/ionic conductivity. In this work, a powerful synergistic strategy by combining ion doping and spiral array architecture to boost high-rate performance of TNO is reported. Cr 3+ doped TNO nanoparticles (Cr-TNO) of 5-10 nm intimately grow on a conductive vertical graphene@TiC-C (VGTC) skeleton, forming novel Cr-TNO@VGTC spiral arrays. The unique spiral growth of TNO is achieved due to the confinement effect of VGTC skeleton. Meanwhile, a more open TNO crystal structure with faster ion transfer paths and enhanced structural stability is realized by Cr 3+ doping, demonstrated via density functional theory calculation and in situ synchrotron X-ray diffraction technique. Benefiting from the superior conductive network, enhanced intrinsic electronic/ionic conductivity of Cr-TNO and reinforced structural stability, the Cr-TNO@VTC arrays show prominent high-power performance with a large capacity of 220 mAh g -1 at 40 C (power density of ≈11 kW kg -1 ) and superior durability (91% retention after 500 cycles). This work provides a new path for the construction of widespread high-power electrodes for fast energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Design, Analysis, Comparison, and Experimental Validation of Insulated Metal Substrates for High-Power Wide-Bandgap Power Modules

Direct bonded copper (DBC) substrates used in power modules have limited heat spreading and manufacturing capability due to ceramic properties and manufacturing technology. The ceramic and copper bonding is also subject to high mechanical stress due to coefficient of thermal expansion mismatch between the copper and the ceramic. For wide-bandgap (WBG) devices, it is of interest exploring new substrate technologies that can overcome some of the challenges of direct bonded copper substrates. In this technical paper, the design, analysis, and comparison of insulated metal substrates (IMSs) for high-power wide-bandgap semiconductor-based power modules are discussed. This paper starts with technical description and discussion of state-of-the-art DBC substrates with different ceramic insulators such as aluminum nitride (AlN), Al 2 O 3 , and Si 3 N 4 . Next, an introduction of IMSs and their material properties, and a design approach for SiC (silicon carbide) metal-oxide-semiconductor field-effect transistor (MOSFET)-based power modules for high-power applications is provided. The influence of dielectric thickness on the power handling capability of the substrate are also discussed. The designed IMS and DBC substrates were characterized in terms of steady-state and transient thermal performance using finite element simulation. Finally, the performance of the IMS and DBC are validated in an experimental setup under different loading and cooling temperature conditions. We report the simulation and experimental results showed that the IMS can provide high steady-state thermal performance for high-power modules based on SiC MOSFETs. Furthermore, the IMS provided enhanced transient thermal performance, which provided a reduced junction temperature when the module is operated at low fundamental output frequencies in traction drive systems.

42 ENGINEERING↗
DOE OSTI2024

EVs@Scale High-Power Charging (HPC) Pillar Deep-Dive Technical Meeting

EVs@Scale Lab Consortium is addressing challenges, developing solutions, and enabling technologies for transportation electrification ecosystem. The consortium has five research pillars one of which focuses on high power charging (HPC). HPC pillar brings together hardware and software expertise, capabilities, and facilities related to high power EV charging, charge management, and grid integration. Deep-dive technical meetings are organized twice a year and provides an opportunity for more industry engagement and technical feedback for the national labs throughout the project lifecycle. High-Power Charging pillar has two active projects: (i) Next-Gen Profiles (NGP) and (ii) High-Power Electric Vehicle Charging Hub Integration Platform (eCHIP). This presentation summarizes the progress made in both projects during the past six months focusing on specific topics. There will be two deep-dive technical meetings twice a year. Every deep-dive meeting will focus on different aspects of the project progress.

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

High power pulse systems for surface processing

A high-power pulsed surface processing system includes insulated-gate bipolar transistors (IGBT) to replicate desirable pulse structures with high precision, at low cost, and with high reliability within a single system. The pulsed surface processing system includes a power supply, an anode and a cathode, a dual gate driver supplying power to one or more IGBT gates, and one or more capacitor banks. Pulse formation software controls the timing and duration of electrical pulses to the electrodes. A freewheeling diode protects the system from an abrupt reduction of current in the circuit. The high-power pulsed surface processing system may be used to control versatile and complex pulse structures while with precise control of instantaneous pulse powers, pulse timing, and process control. The inclusion of dual gate drivers also offers the ability for multiple pulsers to be created and “slaved” together for a wide variety of custom processes.

Tian, Hui↗
DOE OSTI2024

High-Power Electric Vehicle Charging Hub Integration Platform (eCHIP): Design Guidelines and Specifications for DC Distribution-Based Charging Hub

Managed under U.S. Department of Energy (DOE)-funded EVs@Scale Consortium, High-Power Electric Vehicle Charging Hub Integration Platform (eCHIP) project aims to design and develop a high-power, interoperable charging experimental platform to research, develop, and demonstrate the integration and control approaches for a DC distribution-based high-power charging (HPC) system. The eCHIP project addresses the crucial need to design and validate efficient, low-cost, reliable, and interoperable solutions for DC-coupled charging hub ('DC hub' for short). This report explains the design, development, and implementation process of the experimental platform for the DC hub. The utilization of DC distribution holds significant potential for enhancing the operation of an HPC station architecture. However, there are challenges establishing the DC hub, including interoperability, commoditization, distributed energy resource integration, stability, DC protection, and lack of common system level controllers. To address these challenges, a testing setup is required that accommodates commercial off-the-shelf (COTS) products as well as novel, in-house designed solutions to evaluate different use cases at rated power and voltage levels.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Fluid-kinetic modeling of a high power density radio frequency inductively coupled positive hydrogen ion source

High power density radio-frequency (RF) inductively coupled positive ion sources are attractive candidates for next-generation neutral beam injection (NBI) systems, where higher injected power and longer pulse lengths are desired without sacrificing source reliability. Operating at absorbed power densities of order $\gt 1~\mathrm{W\,cm}^{-3}$ places these sources in a regime with stronger gas heating, higher dissociation, and non-Maxwellian electron energy distributions. The Large Uniform Plasma for Ionizing Neutrals (LUPIN) is an RF inductively coupled plasma source designed to explore this high power density regime and to provide guidance for a positive ion source upgrade for the DIII-D NBI system. LUPIN is designed to operate at up to 20 kW of RF power at 2 MHz, coupling energy through a cylindrical quartz vessel to achieve target ion current densities of $2100\,\mathrm{A\,m}^{-2}$ . This paper presents fluid-kinetic modeling of LUPIN using the hybrid plasma equipment model where electrons are treated kinetically, and the simulations reveal that electron energy distribution function transitions from nearly Maxwellian in the core to bi-Maxwellian towards the edge. Parametric simulations investigate the effects of RF power, gas pressure, and frequency on plasma density, ion flux, and uniformity. Parametric sweeps reveal that increasing power shifts the primary ionization channel from molecular to atomic with diminishing flux gains due to skin-depth contraction and gas rarefaction. Higher frequency localizes heating and increases $\mathrm{H}_2^+$ and $\mathrm{H}_3^+$ delivery to the grid, while elevated pressure boosts ionization yet hinders ion transport due to increase in collisionality.

inductively coupled plasma↗
DOE OSTI2024

Multiphysics Simulations of Nanofibrous High Power Targets for the Inference of Failure Modes

Fermilab s High Power Targetry Research and Development (HPT R&D) group have been developing and studying an electrospun nanofiber target concept to support the need for robust targets in future fixed target facilities. These nanofiber mats have demonstrated resistance to radiation damage, and the free motion of the individual fibers is expected to mitigate the cyclic stresses induced by a pulsed, high-power beam. To evaluate the efficacy of this concept, nanofiber mat samples have been sent by the HPT R&D group to the HiRadMat facility at CERN for prototypic thermal shock testing; the outcomes of these experiments show that the survivability of a nanofiber target depends on its construction parameters, in particular the packing density of the fibers. Samples with higher packing densities have consistently been destroyed by exposure to the HiRadMat beam, with a hole at the beam center visible, and layers of nanofibers peeled away from the center hole, whereas samples with lower densities have survived with limited damage. The exact reason for the failure of the higher density targets was unclear at the time of the original experiments, but the results of our recent multiphysics simulations which recreate the experiments support the hypothesis that the expansion and pressurization of the air inside the target after being heated by the pulsed beam is the cause; in a high density nanofiber mat, the motion of air through the pores of the mat is much more restricted, and induces a larger pressure on the fibers, blowing the mat apart. In this talk, we ll share the results of these simulations and discuss how they support this hypothesis.

Asztalos, Will↗
DOE OSTI2025

High Power FPC Progress for EIC ESR Cavities

Electron-Ion Collider (EIC) is a next generation particle accelerator to be built at Brookhaven National Laboratory, in partnership with Thomas Jefferson National Accelerator Facility. In Electron Storage Ring (ESR), 18 single-cell 591 MHz SRF cavities are required to compensate for up to 10 MW energy loss due to synchronic radiation. Two high power FPCs for each cavity are used to deliver up to 800 kW power to the beam. The high power FPC were designed and reviewed. The FPC prototypes will be ready for high power test around mid-2026. This paper presents the latest development of FPC prototyping and path forward for FPC conditioning.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

A Single-Stage Isolated Resonant SiC DC/AC Inverter for Efficient High-Power Applications

This paper presents a single-stage series-resonant dual active half bridge (SR-DAHB) inverter suitable for high power applications. The topology is an isolated dual half-bridge circuit with an unfolding bridge. A combined phase-shift and frequency modulation technique is utilized to generate AC power output. In high-power applications where the switching devices operate at relatively high current and voltage, the switching loss becomes the major portion of the converter’s total loss as the devices are turned on and off under hard switching condition. The primary merit of the proposed single-stage SR-DAHB inverter with the combined phase-shift and frequency modulation control is to significantly reduce the switching loss so that it is not a function of load current. A precise and comprehensive power loss model is developed for both the SR-DAHB and DAHB to optimize the operation of the inverters. The objective of the optimization is to minimize the inverter total loss while calculating the optimum combination of frequency and phase shift. A 1.5 kV, 50 kW prototype was built to demonstrate the performance of the SRDAHB versus DAHB inverters with the combined phase-shift and frequency modulation control, and validate the theoretical analysis.

Tayebi, S. Milad↗
DOE OSTI2021

Additively manufactured electrodes for plasma and power-flow studies in high-power transmission lines on the 1-MA MAIZE facility

Power-flow studies on the 30-MA, 100-ns Z facility at Sandia National Laboratories have shown that plasmas in the facility’s magnetically insulated transmission lines (MITLs) and double post-hole convolute can result in a loss of current delivered to the load. To study power-flow physics on the 1-MA, 100-ns MAIZE facility at the University of Michigan, planar MITL loads and planar post-hole convolute loads have been developed that extend into the lines of sight for various imaging diagnostics on MAIZE. These loads use 3D-printed dielectric support structures lined with thin foils of either aluminum or stainless steel. Here, the metal foils serve as the current-carrying power-flow surfaces, which generate plasma during the current pulse. The foil thickness (50 µm) and widths (11.5–16 mm) are selected to ensure a sufficient linear current density (0.5–0.7 MA/cm) for plasma formation. Laser backlighting (532 nm) and visible-light self-emission imaging capture the overall plasma evolution in the anode–cathode gaps, including the gap closure velocities (1–4 cm/μs).

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Passive high-power-density grid interface device

A hybrid switched capacitor power converter for high-power applications is provided. The converter has a transistor-switched input-stage boost converter followed by a capacitor-and-diode ladder circuit. The converter is adapted to produce an output voltage of at least 5 kV at a power level of at least 0.5 kW. The ladder circuit includes one or more multi-stage rails.

Brocato, Robert W.↗
DOE OSTI2022

Electric Vehicles at Scale (EVs@Scale) Laboratory Consortium Deep-Dive Technical Meetings: High Power Charging (HPC) Summary Report

Electric vehicle (EV) adoption will change the composition of EV charging load to higher-power charging as more medium- (MD) and heavy-duty (HD) applications are electrified, and as all vocations, including light-duty (LD) vehicles, are capable of faster charging. These shifts provide the opportunity for high-power charging (HPC) and facility equipment to evolve and improve efficiency, cost, and space. High-Power Electric Vehicle Charging Hub Integration Platform (eCHIP) project designs and develops a high-power, interoperable charging experimental platform to research, develop, and demonstrate the integration approaches and technology solutions. The project addresses (1) interconnection and management of a grid-tied inverter; (2) development of a DC distribution system that is responsible for system energy management, interoperability, and DC protection; (3) modular DC/DC conversion for vehicle charging; (4) EV charging interface and DC/DC integration; and (5) smart charge control and vehicle-to-edge (vehicle-to-building [V2B], vehicle-to-everything [V2X]) capability. This summary presentation is the first technical progress output of the project. It provides insight for the first deep-dive technical meeting outputs in terms of research presentations and also includes summary of the discussions occurred in the follow-up breakout sessions. The summary presentation covers three technical areas: (1) HPC: State of the art power architectures and the design of the power electronics, (2) Modeling, energy management, and power control in the HPC station, and (3) Codes and standards work that are in line with the previous two topic areas.

ADVANCED PROPULSION SYSTEMS,POWER TRANSMISSION AND↗
DOE OSTI2022

High performance high-power textured Mn/Cu-doped PIN-PMN-PT ceramics

Piezoelectric ceramics with combinatory soft and hard characteristics are highly desired for high-power applications. However, it remains grand challenge to achieve simultaneous presence of hard (e.g. high coercive field, E c ; high mechanical quality factor, Q m ) and soft (e.g. high piezoelectric constant, d; high electromechanical coupling factor, k) piezoelectric properties in piezoelectric ceramics since the mechanism controlling the hard behavior (pinned domain walls) will significantly reduce the soft behavior. Here, we address this grand challenge and demonstrate <001> textured MnO 2 and CuO co-doped Pb(In 1/2 Nb 1/2 )O 3- Pb(Mg 1/3 Nb 2/3 )O 3- PbTiO 3 (PIN-PMN-PT) ceramics exhibiting ultrahigh combined soft and hard piezoelectric properties (d 33 = 713 pC N –1 , k 31 = 0.52, Q m ≈950, E c = 9.6 kV cm –1 , tan δ = 0.45%). The outstanding electromechanical properties are explained by considering composition/phase selection, crystallographic anisotropy and defect engineering. Phase-field model in conjunction with high resolution electron microscopy and diffraction techniques is utilized to delineate the contributions arising from intrinsic piezoelectric response, domain dynamics, and local structural heterogeneity. Furthermore, these results will have significant impact in the development of high-power transducers and actuators.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Metal–ceramic composite structures for fabrication of high power density plasmonic devices

The recent decade brought many advances to plasmonics, but high power density plasmonic antennas designed to behave as heaters or operate in high temperature environments are still facing material stability challenges preventing their ultimate use. Gold has been the optimal choice among plasmonic materials but experiences morphology changes at temperature that result in device efficiency reduction and failure. Bulk titanium nitride has been explored as a solution but has deal-breaking tradeoffs in device quality factor. In this paper, we explore via proof-of-concept the use of a metal–ceramic composite structure to determine whether a bulk Au nanorod can provide strong plasmonic resonances while coated with an ultrathin conformal layer of titanium nitride or silica to provide morphological stability and sufficient plasmonic activity without excessive resonance quality degradation. We show SEM-level morphological stability for temperatures up to 500 °C with coatings below 4 nm. Computer modeling suggests the ultrathin titanium nitride has detrimental effects on the strong plasmonic resonances of a Au nanorod. Here, we then looked into other possible coatings for solutions to stabilize high power density plasmonic antennas including plasmonic oxides, metal adhesion layers, and silica, the latter appearing to be the best option while lowering the overall peak electric field intensity, the silica increases the electric field intensity at its boundary.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The development of a Sustained High Power Density (SHPD) facility

A Sustained High Power Density (SHPD) facility is being planned within the U.S. as a non DT device which can be a bridge to a Compact Fusion Pilot Plant (CFPP) DT operated facility with the future capacity to produce a levelised cost of electricity at a rate competitive with current power generating systems. To accomplish this a review of ITER cost data and recent next step physics/engineering studies that promoted technology development, physics enhancements and innovated configuration improvements that increase operating availability have been injected into a proposed PPPL SHPD design. Much of the physics and engineering design basis for this effort centers on a series of ST studies carried out in recent years attempting to maximize the low aspect ratio (AR) ST performance within realistic engineering constraints of this compact fusion device. One issue found in the low AR design is the lack of volt-seconds generated by a small central solenoid that resides in the available space left after sizing the TF structure to support the high current density/HTS TF coil. Although not required in a larger pilot plant device, a solenoid wrapped around the plasma side of the SC TF coil was considered for the small low aspect ratio SHPD device. Adding a solenoid to the plasma side of the TF imposes a major change to the device configuration – a change which has been found to have cost and assembly issues when compared with an OH solenoid located at the machine center. Finally, the inclusion of a liquid metal first wall divertor system, the integration of local pairs of outboard DCLL blanket segments and a summary of physics performance conditions will be presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Molten Salt Targets for Future High-Power Accelerator Facilities

This talk will give an overview of will give an overview of recent work that began to examine the feasibility of molten salts as a target material for very high power beams as a potential solution for some of the present and future challenges of high power targetry at Fermilab, anchored by the F2D2 conceptual design study. This will include discussion of target and beam dump applications as well as likely challenges, potential for future R&D, projects, and synergy with existing high-power targetry research.

Williams, Jonathan K. [Fermilab]↗
DOE OSTI2023

High-power helicon system commissioning and conditioning progress on DIII-D

The high-power helicon, aka fast wave in the lower hybrid range of frequencies (LHRF), program has completed initial experiments at DIII-D. A 30-element comb-line traveling wave antenna successfully coupled over 0.3 MW of rf power at 476 MHz into both L-mode and ELMing H-mode plasmas for approximately 0.2 s. Here, we describe the helicon systems that enabled high-power operations, and the progress of conditioning in June 2021. Upgraded vacuum feedthroughs are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗