SEARCH · Search NASA

Results for “Hydrodynamic radius”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Achieving record hot spot energies with large HDC implosions on NIF in HYBRID-E

HYBRID-E is an inertial confinement fusion implosion design that increases energy coupled to the hot spot by increasing the capsule scale in cylindrical hohlraums while operating within the current experimental limits of the National Ignition Facility. HYBRID-E reduces the hohlraum scale at a fixed capsule size compared to previous HYBRID designs, thereby increasing the hohlraum efficiency and energy coupled to the capsule, and uses the cross-beam energy transfer (CBET) to control the implosion symmetry by operating the inner (23° and 30°) and outer (44° and 50°) laser beams at different wavelengths (Δλ> 0). Small case to capsule ratio designs can suffer from insufficient drive at the waist of the hohlraum. We show that only a small amount of wavelength separation between the inner and outer beams (Δλ1-2 Å) is required to control the symmetry in low-gas-filled hohlraums (0.3 mg/cm3 He) with enough drive at the waist of the hohlraum to symmetrically drive capsules 1180 μm in outer radius. This campaign is the first to use the CBET to control the symmetry in 0.3 mg/cm3 He-filled hohlraums, the lowest gas fill density yet fielded with Δλ> 0. We find a stronger sensitivity of hot spot P2 in μm per Angstrom (40–50 μm/Å wavelength separation) than observed in high-gas-filled hohlraums and previous longer pulse designs that used a hohlraum gas fill density of 0.6 mg/cm3. There is currently no indication of transfer roll-off with increasing Δλ, indicating that even longer pulses or larger capsules could be driven using the CBET in cylindrical hohlraums. We show that the radiation flux symmetry is well controlled during the foot of the pulse, and that the entire implosion can be tuned symmetrically in the presence of the CBET in this system, with low levels of laser backscatter out of the hohlraum and low levels of hot electron production from intense laser–plasma interactions. Radiation hydrodynamic simulations can accurately represent the early shock symmetry and be used as a design tool, but cannot predict the late-time radiation flux symmetry during the peak of the pulse, and semi-empirical models are used to design the experiments. Deuterium–tritium (DT)-layered tests of 1100 μm inner radius implosions showed performance close to expectations from simulations at velocities up to ~360 km/s, and record yields at this velocity, when increasing the DT fuel layer thickness to mitigate hydrodynamic mixing of the ablator into the hot spot as a result of defects in the ablator. However, when the implosion velocity was increased, mixing due to these defects impacted performance. The ratio of measured to simulated yield for these experiments was directly correlated with the level of observed mixing. These simulations suggest that reducing the mixing, e.g., by improving the capsule defects, could result in higher performance. In addition, future experiments are planned to reduce the coast time at this scale, delay between the peak compression and the end of the laser, to increase the hot spot convergence and pressure. To reduce the coast time by several hundred ps compared to the 1100 μm inner radius implosions, HYBRID-E has also fielded 1050 μm inner radius capsules, which resulted in higher hot spot pressure and a fusion energy yield of ~170 kJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1980

Curvilinear grids for sinuous river channels

In order to effectively analyze the flow in sinuous river channels, a curvilinear grid system was developed for use in the appropriate hydrodynamic code. The CENTERLINE program was designed to generate a two dimensional grid for this purpose. The Cartesian coordinates of a series of points along the boundaries of the sinuous channel represent the primary input to CENTERLINE. The program calculates the location of the river centerline, the distance downstream along the centerline, and both radius of curvature and channel width as a function of such distance downstream. These parameters form the basis for the generation of the curvilinear grid. Based on input values for longitudinal and lateral grid spacing, the corresponding grid system is generated and a file is created containing the appropriate parameters for use in the associated explicit finite difference hydrodynamic programs. Because of the option for a nonuniform grid, grid spacing can be concentrated in areas containing the largest flow gradients.

Tatom, F. B.↗

NASA NTRS1994

Galactic scale gas flows in colliding galaxies: 3-dimensional, N-body/hydrodynamics experiments

We present some results from three dimensional computer simulations of collisions between models of equal mass galaxies, one of which is a rotating, disk galaxy containing both gas and stars and the other is an elliptical containing stars only. We use fully self consistent models in which the halo mass is 2.5 times that of the disk. In the experiments we have varied the impact parameter between zero (head on) and 0.9R (where R is the radius of the disk), for impacts perpendicular to the disk plane. The calculations were performed on a Cray 2 computer using a combined N-body/smooth particle hydrodynamics (SPH) program. The results show the development of complicated flows and shock structures in the direction perpendicular to the plane of the disk and the propagation outwards of a density wave in both the stars and the gas. The collisional nature of the gas results in a sharper ring than obtained for the star particles, and the development of high volume densities and shocks.

Lamb, Susan A.↗

DOE OSTI2023

Fluctuating hydrodynamics and the Rayleigh–Plateau instability

The Rayleigh–Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to interfacial energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using particle-based simulations, such as molecular dynamics (MD), and stochastic partial differential equation–based hydrodynamic models, such as stochastic lubrication theory. In this paper, we present an incompressible fluctuating hydrodynamics model with a diffuse-interface formulation for binary fluid mixtures designed for the study of stochastic interfacial phenomena. An efficient numerical algorithm is outlined and validated in numerical simulations of stable equilibrium interfaces. We present results from simulations of the Rayleigh–Plateau instability for long cylinders pinching into droplets for Ohnesorge numbers of Oh = 0.5 and 5.0. Both stochastic and perturbed deterministic simulations are analyzed and ensemble results show significant differences in the temporal evolution of the minimum radius near pinching. Short cylinders, with lengths less than their circumference, were also investigated. As previously observed in MD simulations, we find that thermal fluctuations cause these to pinch in cases where a perturbed cylinder would be stable deterministically. Finally, we show that the fluctuating hydrodynamics model can be applied to study a broader range of surface tension–driven phenomena.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Connecting galaxy evolution in clusters with their radial profiles and phase space distribution: results from the IllustrisTNG hydrodynamical simulations

ABSTRACT We study the population of galaxies around galaxy clusters in the hydrodynamic simulation suite IllustrisTNG 300-1 to study the signatures of their evolutionary history on observable properties. We measure the radial number density profile, phase space distribution, and splashback radius for galaxies of different masses and colours over the redshift range z = 0−1. The three primary physical effects which shape the galaxy distribution within clusters are the galaxy quenching, angular momentum distribution, and dynamical friction. We find three distinct populations of galaxies by applying a Gaussian mixture model to their distribution in colour and mass. They have distinct evolutionary histories and leave distinct signatures on their distribution around cluster haloes. We find that low-mass red galaxies show the most concentrated distribution in clusters and the largest splashback radius, while high-mass red galaxies show a less concentrated distribution and a smaller splashback radius. Blue galaxies, which mostly quench into the low-mass red population, have the shallowest distribution within the clusters, with those on radial orbits quenched rapidly before reaching pericentre. Comparison with the distribution of galaxies from the Dark Energy Survey survey around Sunyaev–Zeldovich clusters from the Atacama Cosmology Telescope and South Pole Telescope surveys shows evidence for differences in galaxy evolution between simulations and data.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1994

Tidal disruption of Periodic Comet Shoemaker-Levy 9 and a constraint on its mean density

The apparent tidal disruption of Periodic Comet Shoemaker-Levy 9 (1993e) during a close encounter within approximately 1.62 planetary radii of Jupiter can be used along with theoretical models of tidal disruption to place an upper bound on the density of the predisruption body. Depending on the theoretical model used, these upper bounds range from rho(sub c) less than 0.702 +/- 0.080 g/cu cm for a simple analytical model calibrated by numerical smoothed particle hydrodynamics (SPH) simulations to rho(sub c) less than 1.50 +/- 0.17 g/cu cm for a detailed semianalytical model. The quoted uncertainties stem from an assumed uncertainty in the perijove radius. However, the uncertainty introduced by the different theoretical models is the major source of error; this uncertainty could be eliminated by future SPH simulations specialized to cometary disruptions, including the effects of initially prolate, spinning comets. If the SPH-based upper bound turns out to be most appropriate, it would be consistent with the predisruption body being a comet with a relatively low density and porous structure, as has been asserted previously based on observations of cometary outgassing. Regardless of which upper bound is preferable, the models all agree that the predisruption body could not have been a relatively high-density body, such as an asteroid with rho approximately = 2 g/cu cm.

Boss, Alan P.↗

NASA NTRS1994

On the hydrodynamic interaction of shock waves with interstellar clouds. 1: Nonradiative shocks in small clouds

The interstellar medium (ISM) is inhomogeneous, with clouds of various temperatures and densities embedded in a tenuous intercloud medium. Shocks propagating through the ISM can ablate or destroy the clouds, at the same time significantly altering the properties of the intercloud medium. This paper presents a comprehensive numerical study of the simplest case of the interaction between a shock wave and a spherical cloud, in which the shock far from the cloud is steady and planar, and in which radiative losses, thermal conduction, magnetic fields, and gravitational forces are all neglected. As a result, the problem is completely specified by two numbers: the Mach number of the shock, M, and the ratio of the density of the cloud to that of the intercloud medium, Chi. For strong shocks we show that the dependence on M scales out, so the primary independent parameter is Chi. Variations from this simple case are also considered: the potential effect of radiative losses is assessed by calculations in which the ratio of specific heats in the cloud is 1.1 instead of 5/3; the effect of the initial shape of the cloud is studied by using a cylindrical cloud instead of a spherical one; and the role of the initial shock is determined by considering the case of a cloud embedded in a wind. Local adaptive mesh refinement techniques with a second-order, two-fluid, two-dimensional Godunov hydrodynamic scheme are used to address these problems, allowing heretofore unobtainable numerical resolution. Convergence studies to be described in a subsequent paper demonstrate that about 100 zones per cloud radius are needed for accurate results; previous calculations have generally used about a third of this number. The results of the calculations are analyzed in terms of global quantities which provide an overall description of te shocked cloud: the size and shape of the cloud, the mean density, the mean pressure, the mean velocity, the velocity dispersion, and the total circulation.

Klein, Richard I.↗

NASA NTRS1988

Cooling flows and the stability of radio jets

This paper considers what happens to radio jets which, propagating out from the nucleus of an elliptical galaxy, encounters a point at which the ambient gas pressure increases very rapidly. The pressure variation within the sonic radius of a cooling flow is calculated, and a semianalytical calculation of the stability of a jet which encounters a rapidly increasing pressure gradient is given. The results of numerical hydrodynamic simulations which test the results of the analytic calculations are shown. The case where the jet encounters the sonic region at an oblique angle is considered, and it is suggested that this may provide an explanation for jets which are bent on small scales. These results are applied to radio sources associated with central dominant cluster galaxies and with more normal elliptical galaxies.

Soker, Noam↗

NASA NTRS1991

Near-critical spherical accretion by neutron stars - General relativistic treatment

Time-independent spherical accretion by a neutron star is studied using general relativistic radiation hydrodynamics. Numerical integrations of the flow equations are presented. These show that when the luminosity is sufficiently close to (but below) the Eddington limit, the flow velocity increases with decreasing radius far from the neutron star, reaches a maximum at an intermediate radius, and decreases at small radii. A large fraction of the binding energy of the flow is transferred to the radiation through scattering before the flow strikes the surface of the neutron star. Following Miller's treatment of accretion at luminosites near the Eddington limit (which neglected general relativistic effects), analytic approximations for the decelerating phase of the flow's velocity profile are derived. The dependence of the solutions on the variable Eddington factor prescription chosen to close the radiation moment equations is also examined.

Park, Myeong-Gu↗

NASA NTRS1996

Latitudinal Dependence of the Radial IMF Component: Coronal Imprint

Measurements by Ulysses have confirmed that there is no significant gradient with respect to heliomagnetic latitude in the radial component, B(sub r,) of the interplanetary magnetic field. In the corona, the plasma, beta is much less than 1, except directly above streamers, so longitudinal and latitudinal gradients in field strength will relax due to the transverse magnetic pressure gradient force as the solar wind carries magnetic flux away from the Sun. This happens quickly enough so that the field is essentially uniform by 5 - 10 solar radius, apparently remaining so as it is carried to beyond 1 AU. Here, we illustrate the coronal relaxation with a qualitative physical argument and by reference to a detailed Magneto HydroDynamics (MHD) simulation.

Suess, S. T.↗

DOE OSTI2024

Dark Energy Survey Year 6 results: Intra-cluster light from redshift 0.2 to 0.5

Using the full 6 years of imaging data from the Dark Energy Survey, we study the surface brightness profiles of galaxy cluster central galaxies and intra-cluster light. We apply a ‘stacking’ method to over 4000 galaxy clusters identified by the redMaPPer cluster finder in the redshift range of 0.2−0.5. This yields high-signal-to-noise circularly averaged profile measurements of the central galaxy and intra-cluster light out to 1 Mpc from the cluster centre. Using redMaPPer richness as a cluster mass indicator, we find that the brightness of the intra-cluster light has a strong mass dependence throughout the 0.2−0.5 redshift range, and this dependence grows stronger at a larger radius. In terms of redshift evolution, we find some evidence that the central galaxy, as well as the diffuse light within the transition region between the cluster central galaxy and intra-cluster light within 80 kpc from the centre, may be growing over time. At larger radii, more than 80 kpc away from the cluster centre, we do not detect evidence of additional redshift evolution beyond the cluster mass dependence, consistent with the findings from the IllustrisTNG hydrodynamic simulation. We speculate that the major driver of intra-cluster light growth, especially at large radii, is associated with cluster mass growth. Finally, we find that the colour of the cluster central galaxy and intra-cluster light displays a radial gradient that becomes bluer at a larger radius, which is consistent with a stellar stripping and disruption origin of intra-cluster light as suggested by simulation studies.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Hydrodynamic electron transport near charge neutrality

We develop the theory of hydrodynamic electron transport in a long-range disorder potential for conductors in which the underlying electron liquid lacks Galilean invariance. For weak disorder, we express the transport coefficients of the system in terms of the intrinsic kinetic coefficients of the electron liquid and the correlation function of the disorder potential. We apply these results to analyze the doping and temperature dependence of transport coefficients of graphene devices. In this work, we show that at charge neutrality, long-range disorder increases the conductivity of the system above the intrinsic value. The enhancement arises from the predominantly vortical hydrodynamic flow caused by local deviations from charge neutrality. Its magnitude is inversely proportional to the shear viscosity of the electron liquid and scales as the square of the disorder correlation radius. This is qualitatively different from the situation away from charge neutrality. In that case, the flow is predominantly potential and produces negative viscous contributions to the conductivity, which are proportional to the sum of shear and bulk viscosities and inversely proportional to the square of disorder correlation radius.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Velocity-dependent annihilation radiation from dark matter subhalos in cosmological simulations

Here, we use the suite of Milky Way-like galaxies in the Auriga simulations to determine the contribution to annihilation radiation from dark matter subhalos in three velocity-dependent dark matter annihilation models: Sommerfeld, p-wave, and d-wave models. We compare these to the corresponding distribution in the velocity-independent s-wave annihilation model. For both the hydrodynamical and dark-matter-only simulations, only in the case of the Sommerfeld-enhanced annihilation does the total annihilation flux from subhalos exceed the total annihilation flux from the smooth halo component within the virial radius of the halo. Progressing from Sommerfeld to the s, p, and d-wave models, the contribution from the smooth component of the halo becomes more dominant, implying that for the p-wave and d-wave models the smooth component is by far the dominant contribution to the radiation. Comparing to the Galactic center excess observed by Fermi-LAT, for all simulated halos the emission is dominated by the smooth halo contribution. However, it is possible that for Sommerfeld models, extrapolation down to mass scales below the current resolution limit of the simulation would imply a non-negligible contribution to the gamma-ray emission from the Galactic Center region.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

The force explosion condition is consistent with spherically symmetric CCSN explosions

ABSTRACT One of the major challenges in core-collapse supernova (CCSN) theory is to predict which stars explode and which collapse to black holes. The analytic force explosion condition (FEC) shows promise in predicting which stars explode in that the FEC is consistent with CCSN simulations that use the light-bulb approximation for neutrino heating and cooling. In this follow-up manuscript, we take the next step and show that the FEC is consistent with the explosion condition when using actual neutrino transport in gr1d simulations. Since most 1D simulations do not explode, to facilitate this test, we enhance the heating efficiency within the gain region. To compare the analytic FEC and radiation-hydrodynamic simulations, this manuscript also presents a practical translation of the physical parameters. For example: we replace the neutrino power deposited in the gain region, Lντg, with the net neutrino heating in the gain region; rather than assuming that $\dot{M}$ is the same everywhere, we calculate $\dot{M}$ within the gain region; and we use the neutrino opacity at the gain radius. With small, yet practical modifications, we show that the FEC predicts the explosion conditions in spherically symmetric CCSN simulations that use neutrino transport.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

StaNdaRT: a repository of standardised test models and outputs for supernova radiative transfer

We present the first results of a comprehensive supernova (SN) radiative-transfer (RT) code-comparison initiative (StaNdaRT), where the emission from the same set of standardised test models is simulated by currently used RT codes. We ran a total of ten codes on a set of four benchmark ejecta models of Type Ia SNe. We consider two sub-Chandrasekhar-mass (M tot = 1.0 M ⊙ ) toy models with analytic density and composition profiles and two Chandrasekhar-mass delayed-detonation models that are outcomes of hydrodynamical simulations. We adopt spherical symmetry for all four models. The results of the different codes, including the light curves, spectra, and the evolution of several physical properties as a function of radius and time are provided in electronic form in a standard format via a public repository. We also include the detailed test model profiles and several Python scripts for accessing and presenting the input and output files. We also provide the code used to generate the toy models studied here. In this paper, we describe the test models, radiative-transfer codes, and output formats in detail, and provide access to the repository. We present example results of several key diagnostic features.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1979

Squeeze effects in radial face seals

Squeeze effects in a liquid lubricated radial face seal are analyzed. The analysis considers face misalignment with both axial and angular vibrations of the primary seal ring. Translational, rotational, and cross-coupled damping coefficients of the fluid film are derived analytically from a solution of the Reynolds equation utilizing the narrow seal approximation. Results are given for a wide range of practical radius ratios. At each radius ratio, the complete range of angular misalignment - from parallel faces to touch down - is covered. It is shown that squeeze effects in face seals are usually larger than the more familiar hydrodynamic effects. These effects play an important role in the seal's mechanism of operation and therefore have to be considered in any realistic seal model.

Etsion, I.↗

NASA NTRS1990

The formation phase of the solar nebula

Hydrodynamical calculations of the collapse of an axisymmetric, rotating protostellar cloud, with radiation transport and without magnetic fields, are presented. The collapse is assumed to start from a centrally condensed sphere of radius 5 x 10 to the 15th cm, a mean density of 4 x 10 to the -15th g/cu cm, a total mass of 1 solar mass, and a total angular momentum of 10 to the 53rd g sq cm per sec. The numerical grid is chosen to resolve the region of disk formation between 1 and 60 AU from the center. Frequency-dependent radiative transfer calculations show how the emergent spectrum of the structure depends upon viewing angle with respect to the rotation axis and how the observed isophotal contours should depend on wavelength and viewing angle. The central part of the protostar, interior to 1 AU, is not resolved numerically but is modeled approximately. At the end of the calculation, this region is found to have a mass of 0.6 solar mass and a ratio of rotational to gravitational energy of about 0.4, sufficiently large to be unstable to nonaxisymmetric perturbations. Although the disk is gravitationally stable according to the local Toomre criterion, the nonaxisymmetric structure in the center is likely to lead to angular momentum transport.

Bodenheimer, Peter↗

NASA NTRS1974

Propagation of solar disturbances in interplanetary space

Time-dependent solutions of a one-fluid model of the interplanetary medium are investigated. This set of unsteady hydrodynamic equations has been written in conservation form in order to apply the Lax-Wendroff method for the solution of this problem. The initial condition is specified by a pulse at 1 solar radius. The equilibrium condition is chosen to be the steady solution of a quiet solar wind. The specified solar disturbances in this calculation are allowed to be both sub- and supersonic by the present theoretical formulation. The results are presented in terms of density, velocity, and temperature profiles of the interplanetary gas flow at heliocentric distances up to about 10 AU at any particular time. The trajectories of disturbances for various initial pulses are shown. Some 1972 solar-flare observational data are compared with these theoretical calculations. From these calculations, the effects on the interplanetary environment, due to the propagation of solar disturbances, can be determined.

Wu, S. T.↗