Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrostatics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Electromodulation spectroscopy of direct optical transitions in Ge{sub 1−x}Sn{sub x} layers under hydrostatic pressure and built-in strain

Unstrained Ge{sub 1−x}Sn{sub x} layers of various Sn concentration (1.5%, 3%, 6% Sn) and Ge{sub 0.97}Sn{sub 0.03} layers with built-in compressive (ε = −0.5%) and tensile (ε = 0.3%) strain are grown by molecular beam epitaxy and studied by electromodulation spectroscopy (i.e., contactless electroreflectance and photoreflectance (PR)). In order to obtain unstrained GeSn layers and layers with different built-in in-plane strains, virtual InGaAs substrates of different compositions are grown prior to the deposition of GeSn layers. For unstrained Ge{sub 1−x}Sn{sub x} layers, the pressure coefficient for the direct band gap transition is determined from PR measurements at various hydrostatic pressures to be 12.2 ± 0.2 meV/kbar, which is very close to the pressure coefficient for the direct band gap transition in Ge (12.9 meV/kbar). This suggests that the hydrostatic deformation potentials typical of Ge can be applied to describe the pressure-induced changes in the electronic band structure of Ge{sub 1−x}Sn{sub x} alloys with low Sn concentrations. The same conclusion is derived for the uniaxial deformation potential, which describes the splitting between heavy-hole (HH) and light-hole (LH) bands as well as the strain-related shift of the spin-orbit (SO) split-off band. It is observed that the HH, LH, and SO related transitions shift due to compressive and tensile strain according to the Bir-Pikus theory. The dispersions of HH, LH, and SO bands are calculated for compressive and tensile strained Ge{sub 0.97}Sn{sub 0.03} with the 8-band kp Hamiltonian including strain effects, and the mixing of HH and LH bands is discussed. In addition, the dispersion of the electronic band structure is calculated for unstrained Ge{sub 1−x}Sn{sub x} layers (3% and 6% Sn) at high hydrostatic pressure with the 8-band kp Hamiltonian, and the pressure-induced changes in the electronic band structure are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning martensitic transitions in (MnNiSi) 0.65 (Fe 2 Ge) 0.35 through heat treatment and hydrostatic pressure

A first-order magneto-structural transition from a ferromagnetic orthorhombic TiNiSi-type martensite phase to a paramagnetic hexagonal Ni2In-type austenite phase was observed in (MnNiSi) 0.65 (Fe2Ge) 0.35 . In this work, we demonstrate that the first-order magneto-structural transition temperature for a given composition is tunable over a wide temperature range through heat treatment and hydrostatic pressure. The first-order transition temperature was reduced by over 100 K as the annealing temperature went from 600 to 900 °C, and this first-order transition was converted to second order when the sample was annealed at 1000 °C. The maximum magnetic-induced isothermal entropy change with μ0ΔH=7 T reaches -58 J/kg K for the sample annealed at 600 °C, and the relative cooling power reaches 558 J/kg for the sample annealed at 700 °C. Similar to the influence of annealing temperatures, the first-order martensitic transition temperatures were reduced as the application of hydrostatic pressure increased until they were converted to second order. Our results suggest that the (MnNiSi) 0.65 (Fe2Ge) 0.35 system is a promising platform for tuning magneto-structural transitions and the associated magnetocaloric effects. Furthermore, a similar heat treatment methodology or application of hydrostatic pressure can be applied to MnNiSi-based shape memory alloys to tailor their working transition temperatures.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The influence of Au substitution and hydrostatic pressure on the phase transitions and magnetocaloric properties of MnCoGe alloys

In this work, the phase transitions and magnetocaloric properties of Mn 1--x Au x CoGe (0≤x≤0.025) alloys were studied as a function of concentration x and applied hydrostatic pressure. The increasing substitution of Au for Mn results in the decrease of the first-order martensitic transition temperature, and this first-order martensitic transition was ultimately converted to a second-order magnetic transition when the Au substitution (x) reached 0.025. The magnitudes of the maximum magnetic entropy changes increased when the magnetic and structural transitions were coupled, which occurred for 0.005≤x≤0.020. The largest maximum magnetic entropy change for a field change of μ 0 ΔH=7 T was 33.1J/kgK for the sample with x=0.020. Similar to the effect of Au substitution, the first-order martensitic transition temperature initially decreased, and then converted to second order, when the applied hydrostatic pressure reached a large enough value. Interestingly, both Au substitution and pressure application cause a volume reduction and, in both cases, the first-order martensitic transition temperature initially reduced and then converted to second-order. These results suggest two different methods of tuning the transition temperatures in these magnetocaloric materials. One can either apply hydrostatic pressure and temporarily adjust the transition temperatures or modify the composition chemically and permanently change the transition temperatures.

36 MATERIALS SCIENCE↗

The influence of hydrostatic pressure and annealing conditions on the magnetostructural transitions in MnCoGe

In this work, the phase transitions of stoichiometric MnCoGe alloys were studied by systematically varying the annealing conditions and applying hydrostatic pressure. First-order martensitic structural transitions from the Ni2In-type hexagonal austenite phase to the TiNiSi-type orthorhombic martensite phase spanned a wide temperature window (>200 K) as a result of quenching the samples at temperatures ranging from the solid phase at 700 °C to the liquid phase at 1150 °C. Despite the large variation in their structural transition temperatures, the changes in cell parameters across the structural transitions and the Curie–Weiss temperatures of the martensite/austenite phase were relatively small. For the sample quenched from 800 °C, coupled magnetostructural transitions were observed, and the largest maximum magnetic entropy change was found to be -ΔS max = 33:6 J/kg K for a 7-T field change. The coupled magnetostructural transitions and the corresponding magnetic entropy enhancements were found to also be achievable by applying hydrostatic pressures. Meanwhile, as the quenching temperatures or hydrostatic pressures increased, the first-order martensitic structural transition shifted toward lower temperature until it was ultimately absent, in which case only the crystal structure and magnetic transition of the Ni 2 In-type hexagonal austenite phase were present.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effects of doping, hydrostatic pressure, and thermal quenching on the phase transitions and magnetocaloric properties in Mn 1– x Co x NiGe

The effects of doping, hydrostatic pressure, and thermal quenching on the phase transitions and magnetocaloric properties of the Mn 1–x Co x NiGe system have been investigated. Cobalt doping on the Mn site shifted the martensitic structural transition toward lower temperature until it was ultimately absent, leaving only a magnetic transition from a ferromagnetic (FM) to a paramagnetic (PM) state in the high-temperature hexagonal phase. Co-occurrence of the magnetic and structural transitions to form a first-order magnetostructural transition (MST) from the FM orthorhombic to the PM hexagonal phase was observed in samples with 0.05 < x < 0.20. An additional antiferromagnetic–ferromagnetic-like transition was observed in the martensite phase for 0.05 < x < 0.10, which gradually vanished with increasing Co concentration (x > 0.10) or magnetic field (H > 0.5 T). The application of external hydrostatic pressure shifted the structural transition to lower temperature until an MST was formed in samples with x = 0.03 and 0.05, inducing large magnetic entropy changes up to –80.3 J kg –1 K –1 (x = 0.03) for a 7-T field change under 10.6-kbar pressure. Similar to the effects of the application of hydrostatic pressure, an MST was formed near room temperature in the sample with x = 0.03 by annealing at high temperature (1200 °C) followed by quenching, resulting in a large magnetic entropy change of –56.2 J kg –1 K –1 . Furthermore, these experimental results show that the application of pressure and thermal quenching, in addition to compositional variations, are effective methods to create magnetostructural transitions in the MnNiGe system, resulting in large magnetocaloric effects.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Multi-layer hydrostatic equilibrium of planets and synchronous moons: theory and application to Ceres and to solar system moons

The hydrostatic equilibrium of multi-layer bodies lacks a satisfactory theoretical treatment despite its wide range of applicability. Here we show that by using the exact analytical potential of homogeneous ellipsoids we can obtain recursive analytical solutions and an exact numerical method for the hydrostatic equilibrium shape problem of multi-layer planets and synchronous moons. The recursive solutions rely on the series expansion of the potential in terms of the polar and equatorial shape eccentricities, while the numerical method uses the exact potential expression. These solutions can be used to infer the interior structure of planets and synchronous moons from their observed shape, rotation, and gravity. When applied to the dwarf planet Ceres, we show that it is most likely a differentiated body with an icy crust of equatorial thickness 30-90 km and a rocky core of density 2.4-3.1 g cm{sup –3}. For synchronous moons, we show that the J {sub 2}/C {sub 22} ≅ 10/3 and the (b – c)/(a – c) ≅ 1/4 ratios have significant corrections of order Ω{sup 2}/(πGρ), with important implications for how their gravitational coefficients are determined from fly-by radio science data and for how we assess their hydrostatic equilibrium state.

79 ASTRONOMY AND ASTROPHYSICS↗

TESTING STRICT HYDROSTATIC EQUILIBRIUM IN SIMULATED CLUSTERS OF GALAXIES: IMPLICATIONS FOR A1689

Accurate mass determination of clusters of galaxies is crucial if they are to be used as cosmological probes. However, there are some discrepancies between cluster masses determined based on gravitational lensing and X-ray observations assuming strict hydrostatic equilibrium (i.e., the equilibrium gas pressure is provided entirely by thermal pressure). Cosmological simulations suggest that turbulent gas motions remaining from hierarchical structure formation may provide a significant contribution to the equilibrium pressure in clusters. We analyze a sample of massive clusters of galaxies drawn from high-resolution cosmological simulations and find a significant contribution (20%-45%) from non-thermal pressure near the center of relaxed clusters, and, in accord with previous studies, a minimum contribution at about 0.1 R {sub vir}, growing to about 30%-45% at the virial radius, R {sub vir}. Our results strongly suggest that relaxed clusters should have significant non-thermal support in their core region. As an example, we test the validity of strict hydrostatic equilibrium in the well-studied massive galaxy cluster A1689 using the latest high-resolution gravitational lensing and X-ray observations. We find a contribution of about 40% from non-thermal pressure within the core region of A1689, suggesting an alternate explanation for the mass discrepancy: the strict hydrostatic equilibrium is not valid in this region.

79 ASTRONOMY AND ASTROPHYSICS↗

Suppression of the magnetic order in CeFeAsO: Nonequivalence of hydrostatic and in-plane chemical pressure

We present a detailed investigation of the electronic properties of CeFeAsO under chemical (As by P substitution) and hydrostatic pressure by means of in-house and synchrotron Mossbauer spectroscopy. The Fe magnetism is suppressed due to both pressures and no magnetic order was observed above a P-substitution level of 40 % or 5.2 GPa hydrostatic pressure. We compared both pressures and found that the isovalent As by P substitution change the crystallographic and electronic properties differently than hydrostatic pressure.

36 MATERIALS SCIENCE↗

Spin-strain interactions under hydrostatic pressure in α-RuCl 3

We investigate the effects of hydrostatic pressure on 𝛼−RuCl 3 , a prototypical material for the Kitaev spin model on a honeycomb lattice with a possible spin-liquid ground state. Using ultrasound measurements at pressures up to 1.16 GPa, we reveal significant modifications of the acoustic properties and the 𝐻−𝑇 phase diagram of this material. Hydrostatic pressure suppresses the three-dimensional magnetic order and induces a dimerization transition at higher pressures. At low pressures, the sound attenuation exhibits a linear temperature dependence, while above 0.28 GPa, it becomes nearly temperature independent, suggesting a shift in the phonon scattering regime dominated by Majorana fermions. These findings provide new insights into spin-strain interactions in Kitaev magnets and deliver a detailed characterization of the 𝐻−𝑇 phase diagram of 𝛼−RuCl 3 under hydrostatic pressure.

Focused ion beam↗

Mechanical Response of Castlegate Sandstone under Hydrostatic Cyclic Loading

The stress history of rocks in the subsurface affects their mechanical and petrophysical properties. Rocks can often experience repeated cycles of loading and unloading due to fluid pressure fluctuations, which will lead to different mechanical behavior from static conditions. This is of importance for several geophysical and industrial applications, for example, wastewater injection and reservoir storage wells, which generate repeated stress perturbations. Laboratory experiments were conducted with Castlegate sandstone to observe the effects of different cyclic pressure loading conditions on a common reservoir analogue. Each sample was hydrostatically loaded in a triaxial cell to a low effective confining pressure, and either pore pressure or confining pressure was cycled at different rates over the course of a few weeks. Fluid permeability was measured during initial loading and periodically between stress cycles. Samples that undergo cyclic loading experience significantly more inelastic (nonrecoverable) strain compared to samples tested without cyclic hydrostatic loading. Permeability decreases rapidly for all tests during the first few days of testing, but the decrease and variability of permeability after this depend upon the loading conditions of each test. Cycling conditions do affect the mechanical behavior; the elastic moduli decrease with the increasing loading rate and stress cycling. The degree of volumetric strain induced by stress cycles is the major control on permeability change in the sandstones, with less compaction leading to more variation from measurement to measurement. The data indicate that cyclic loading degrades permeability and porosity more than static conditions over a similar period, but the petrophysical properties are dictated more by the hydrostatic loading rate rather than the total length of time stress cycling is imposed.

58 GEOSCIENCES↗

A Non-hydrostatic Variable Resolution Atmospheric Model in ACME

The Accelerated Climate Modeling for Energy (ACME) Project is designed to perform coupled climate simulations at high resolution on current and next generation DOE leadership class supercomputers. Prior to this project, the ACME atmospheric model employed the primitive equations of motion, which constrained its maximum resolution and limited the physical phenomena that it could resolve. Our team removed this constraint by implementing a non-hydrostatic (NH) atmospheric model in the ACME Framework. Collaboration with SciDAC FASTMath institutes facilitated improvements to key technologies needed for the non-hydrostatic model. This model was tested in a variable resolution framework, which enables high resolution simulation regions at reasonable computational costs. The correct performance of the NH model was verified with standard dynamical-core tests, and by demonstrating that it reproduced expected climate statistics in the hydrostatic regime. The completed model was applied to evaluate the limitations of existing turbulent mountain stress and gravity wave drag parameterizations, in order to demonstrate the power of the new nonhydrostatic model to model new phenomena and enhance the quality of present day 1/4 degree simulations.

Hall, David Matthew↗

On variable hydrostatic transmission for road vehicles, powered by supply of fluid at constant pressure

Various hydrostatic power transmission systems for automotive applications with power supply at constant pressure and unrestricted flow and with a Volvo Flygmotor variable displacement motor as the principal unit were investigated. Two most promising concepts were analyzed in detail and their main components optimized for minimum power loss at the EPA Urban Driving Cycle. The best fuel consumption is less than 10 lit. per 100 kM for a 1542 kG vehicle with a hydrostatic motor and a two speed gear box in series (braking power not recovered). Realistic system pressure affects the fuel consumption just slightly, but the package volume/weight drastically. Back pressure increases losses significantly. Special attention was paid to description of the behavior and modeling of the losses of variable displacement hydrostatic machines.

Magi, M.↗

NASTRAN Structural Model for the Large 64-meter Antenna Pedestal. Part 3: Applications to Hydrostatic Bearing Oil Film

Investigations are conducted on the 64-meter antenna hydrostatic bearing oil film thickness under a variety of loads and elastic moduli. These parametric studies use a NASTRAN pedestal structural model to determine the deflections under the hydrostatic bearing pad. The deflections form the input for a computer program to determine the hydrostatic bearing oil film thickness. For the future 64-meter to 70-meter antenna extension and for the 2.2-meter (86-in.) haunch concrete replacement cases, safe oil film thickness (greater than 0.13 mm (0.005 in.) at the corners of the pad) are predicted. The effects of varying moduli of elasticity for different sections of the pedestal and the film height under distressed runner conditions are also studied.

Chian, C. T.↗

Evaluation of a hybrid hydrostatic bearing for cryogenic turbopump application

A hybrid hydrostatic bearing was designed to operate in liquid hydrogen at speeds to 80,000 rpm and radial loads to 440 n (100 lbf). The bearing assembly consisted of a pair of 20-mm angular-contact ball bearings encased in a journal, which was in turn supported by a fluid film of liquid hydrogen. The size and operating conditions of the bearing were selected to be compatible with the operating requirements of an advanced technology turbopump. Several test parameters were varied to characterize the bearing's steady-state operation. The rotation of the tester shaft was varied between 0 and 80,000 rpm. Bearing inlet fluid pressure was varied between 2.07 and 4.48 MPa (300 and 650 psia), while the fluid sump pressure was independently varied between 0.34 and 2.07 MPa (50 and 300 psia). The maximum radial load applied to the bearing was 440 N (110 lbf). Measured hybrid-hydrostatic-bearing stiffness was 1.5 times greater than predicted, while the fluid flow rate through the bearing was 35 to 65 percent less than predicted. Under two-phase fluid conditions, the stiffness was even greater and the flow rate was less. The optimal pressure ratio for the bearing should be between 0.2 and 0.55 depending on the balance desired between bearing efficiency and stiffness. Startup and shutdown cyclic tests were conducted to demonstrate the ability of the hybrid-hydrostatic-bearing assembly to survive at least a 300-firing-duty cycle. For a typical cycle, the shaft was accelerated to 50,000 rpm in 1.8 sec. The bearing operated for 337 start-stop cycles without failure.

Spica, P. W.↗

Model Of Bearing With Hydrostatic Damper

Improved mathematical model of rotational and vibrational dynamics of bearing package in turbopump incorporates effects of hydrostatic damper. Part of larger finite-element model representing rotational and vibrational dynamics of rotor and housing of pump. Includes representations of deadband and nonlinear stiffness and damping of ball bearings, nonlinear stiffness and damping of hydrostatic film, and stiffness of bearing support. Enables incorporation of effects of hydrostatic damper into overall rotor-dynamic mathematical model without addition of mathematical submodel of major substructure.

Goggin, David G.↗

Fluid Compressibility Effects on the Dynamic Response of Hydrostatic Journal Bearings

A theoretical analysis for the dynamic performance characteristics of laminar flow, capillar/orifice compensated hydrostatic journal bearings is presented. The analysis considers in detail the effect of fluid compressibility in the bearing recesses. At high frequency excitations beyond a break frequency, the bearing hydrostatic stiffness increases sharply and it is accompanied by a rapid decrease in direct damping. Also, the potential of pneumatic hammer instability (negative damping) at low frequencies is likely to occur in hydrostatic bearing applications handling highly compressible fluids. Useful design criteria to avoid undesirable dynamic operating conditions at low and high frequencies are determined. The effect of fluid recess compressibility is brought into perspective, and found to be of utmost importance on the entire frequency spectrum response and stability characteristics of hydrostatic/hybrid journal bearings.

Sanandres, Luis A.↗

An analysis of the 70-meter antenna hydrostatic bearing by means of computer simulation

Recently, the computer program 'A Computer Solution for Hydrostatic Bearings with Variable Film Thickness,' used to design the hydrostatic bearing of the 70-meter antennas, was modified to improve the accuracy with which the program predicts the film height profile and oil pressure distribution between the hydrostatic bearing pad and the runner. This article presents a description of the modified computer program, the theory upon which the computer program computations are based, computer simulation results, and a discussion of the computer simulation results.

Bartos, R. D.↗

A hydrostatic stress-dependent anisotropic model of viscoplasticity

A hydrostatic stress-dependent, anisotropic model of viscoplasticity is formulated as an extension of Bodner's model. This represents a further extension of the isotropic Bodner model over that made to anisotropy by Robinson and MitiKavuma. Account is made of the inelastic deformation that can occur in metallic composites under hydrostatic stress. A procedure for determining the material parameters is identified that is virtually identical to the established characterization procedure for the original Bodner model. Characterization can be achieved using longitudinal/transverse tensile and shear tests and hydrostatic stress tests; alternatively, four off-axis tensile tests can be used. Conditions for a yield stress minimum under off-axis tension are discussed. The model is applied to a W/Cu composite; characterization is made using off-axis tensile data generated at NASA Lewis Research Center (LeRC).

Robinson, D. N.↗