Search NASA⌕ Search

SEARCH · Search NASA

Results for “IDM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Evaluation of Multiple Flow Constrained Area Capacity Setting Methods for Collaborative Trajectory Options Program

The purpose of this study was to compare flow constrained area (FCA) capacity setting methods for Collaborative Trajectory Options Program (CTOP) as they pertain to the Integrated Demand Management (IDM) concept. IDM uses flow balancing to manage air traffic across multiple FCAs with a common downstream constraint, as well as constraints at the respective FCA locations. FCA capacity rates can be set manually, but generating capacities for multiple, interdependent FCAs could potentially over-burden a user. A new enhancement to CTOP called the FCA Balance Algorithm (FBA) was developed at NASA Ames Research Center to improve the process of allocating capacity across multiple flow constrained segments in the airspace. The FBA evaluates the predicted demand and capacity across multiple FCAs and dynamically generates capacity settings for the FCAs that best meet capacity limits for all identified constraints. In a human-in-the-loop simulation study, both manual and automated capacity setting methods were evaluated in terms of their overall feasibility using measures of system performance, human performance, and qualitative feedback. Subject matter experts were asked to use three different methods to allocate capacity to three FCAs, either (1) by manually setting capacity for every 60-minute time window, (2) by manually setting capacity for every 15-minute time window, or (3) by using the FBA capability to automatically generate capacity settings. Results showed no significant differences in terms of overall system performance, indicated by similar ground delay and airport throughput numbers between methods. However, differences in individual strategies afforded by the manual methods allowed some participants to achieve system-wide delay that was much lower than the average. The FBA was the fastest method of capacity setting, and it received the lowest subjective rating scores on physical task load, mental task load, task difficulty and task complexity out of the three methods. Finally, participants explained through qualitative feedback that there were many benefits to using the FBA, such as ease of use, accuracy, and low risk of human input error. Participants did not experience the same limitations with the FBA that they did with the manual methods, such as reduced accuracy in the 60-minute manual condition, or high complexity in the 15-minute/manual condition. These results suggest that the FBA automation enhancement to CTOP maintains system performance while improving human performance. Therefore, the FBA could be introduced as a way to mitigate operator workload while planning a CTOP.

NextGen↗

Demonstrating the Early Adopter Benefits of Submitting Multiple Trajectory Options for Airlines

Integrated Demand Management (IDM), is a NASA developed Traffic Flow Management (TFM) concept that uses Collaborative Trajectory Options Program (CTOP) to precondition traffic flows into the Time Based Flow Management (TBFM) region, helping traffic planners manage imbalances between demand and capacity in the National Airspace (NAS). A workshop held at NASA was conducted to demonstrate how individual airlines can be impacted by using Trajectory Options Sets (TOS) during IDM operations. A primary concern that was specifically addressed in a part-task Human-in-the-Loop simulation was who received the greater benefit, TOS participating or non-TOS participating airlines? The results showed that TOS participating airlines received greater benefit in terms of ground delay, number of reroute options, and additional flight time, than non-TOS participating airlines. However, this result was dependent on the number and location of flights. Therefore, it was advantageous for airlines to equip TOS. In addition, we found that non-TOS participating airlines also benefitted from other airlines participating in TOS, because the total system-wide ground delay was reduced as more TOS were introduced into the system. The evidence suggests that the benefits were distributed fairly, and there were no unfair disadvantages for airlines who did not equip TOS.

Integrated Demand Management↗

Formal Specification and Parametric Verification of the ICAROUS Distributed Merging Protocol for Autonomous Aircraft Systems

ICAROUS is a software architecture that provides highly assured core software modules for building safety-centric autonomous unmanned aircraft applications. One of its core components is the ICAROUS distributed merging (IDM) protocol, which allows for decentralized merging of autonomous aircrafts through a designated intersection. This report presents initial results on formal specification and parametric verification of the IDM protocol. We present the development of a formal, discrete-time specification of the ICAROUS distributed merging protocol in TLA+. The developed TLA+ specification includes an abstracted model of the physical aircraft dynamics, the consensus machinery for leader election and coordination, and the computation of merging schedules. In addition, we present details on a command line tool we developed verimerge, that utilizes the TLC model checker for doing bounded, parametric verification and allows for plotting of these results in 2D parameter spaces. The tool also provides functionality for visualization of concrete protocol behaviors, to aid debugging and understanding. We present preliminary, bounded time verification results for a finite number of aircraft. Limitations of the current techniques and possible future extensions of this work are also discussed.

ICAROUS↗

Detailed Destructive Post-Irradiation Examinations of Mixed Uranium and Plutonium Oxide Fuel

The United States Department of Energy (DOE) Fissile Materials Disposition Program (FMDP) is pursuing disposal of surplus weapons-usable plutonium by reactor irradiation as the fissile constituent of MOX fuel. Lead test assemblies (LTAs) have been irradiated for approximately 36 months in Duke Energy's Catawba-1 nuclear power plant (NPP). Per the mixed oxide (MOX) fuel topical report, approved by the U.S. Nuclear Regulatory Commission (NRC), destructive post-irradiation examinations (PIEs) are to be performed on second cycle rods (irradiated to an average burnup of approximately 45 GWd/MTHM). The Radiochemical Analysis Group (RAG) at Oak Ridge National Laboratory (ORNL) is currently performing the detailed destructive post-irradiation examinations (PIE) on four of the mixed uranium and plutonium oxide fuel rods. The analytical process involves dissolution of designated fuel segments in a shielded hot cell for high precision quantification of select fission products and actinide isotopes employing isotope dilution mass spectrometry (IDMS) among other analyses. The hot cell dissolution protocol to include the collection and subsequent alkaline fusion digestion of the fuel's acid resistant metallic particulates will be presented. Although the IDMS measurements of the fission products and actinide isotopes will not be completed by the time of the 51st INMM meeting, the setup and testing of the HPLC chromatographic separations in preparation for these measurements will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Poker Face of Inelastic Dark Matter: Prospects at Upcoming Direct Detection Experiments

The XENON100 and CRESST experiments will directly test the inelastic dark matter explanation for DAMA's 8.9{sigma} anomaly. This article discusses how predictions for direct detection experiments depend on uncertainties in quenching factor measurements, the dark matter interaction with the Standard Model and the halo velocity distribution. When these uncertainties are accounted for, an order of magnitude variation is found in the number of expected events at CRESST and XENON100. The process of testing the DAMA anomaly highlights many of the challenges inherent to direct detection experiments. In addition to determining the properties of the unknown dark matter particle, direct detection experiments must also consider the unknown flux of the incident dark matter, as well as uncertainties in converting a signal from one target nucleus to another. The predictions for both the CRESST 2009 run and XENON100 2010 run show an order of magnitude uncertainty. The nuclear form factor for {sup 184}W, when combined with additional theoretical and experimental uncertainties, will likely prevent CRESST from refuting the iDM hypothesis with an exposure of {Omicron}(100 kg-d) in a model-independent manner. XENON100, on the other hand, will be able to make a definitive statement about a spin-independent, inelastically scattering dark matter candidate. Still, the CRESST 2009 data can potentially confirm iDM for a large range of parameter space. In case of a positive signal, the combined data from CRESST and XENON100 will start probing the properties of the Milky Way DM profile and the interaction of the SM with the dark matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance of a HPGe System for Surface and Container Measurements - 13582

The decommissioning of a nuclear facility or post-accident cleanup is an immense engineering effort requiring an array of specialist tools and techniques. The decommissioning and cleanup activities generate large quantities of low activity waste. For economic disposal, it is desirable to certify the waste as suitable for free release. Every container must be assayed to a sufficient degree of accuracy and sensitivity so that it may be certified to be or not to be suitable for 'free release'. In a previous work, the performance of a highly-automated system for free release of large numbers of containers was presented in which the spectroscopy hardware comprised four ORTEC Interchangeable Detector Module (IDM) mechanically cooled HPGe spectrometers in conjunction with ORTEC ISOPlus waste assay software. It was shown that the system was capable of assaying large containers to free release levels in reasonable measurement times. Not all operations have enough waste to justify an automated system or rapid assay results may be required, perhaps in a remote location. To meet this need, a new mobile system has been developed for the assay of smaller objects (drums, boxes, and surfaces) In-Situ. The system incorporates the latest generation IDM-200 and ISOPlus software and a new variant of the ISOCart hardware. This paper will describe the system and performance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Symmetries and mass degeneracies in the scalar sector

We explore some aspects of models with two and three SU(2) scalar doublets that lead to mass degeneracies among some of the physical scalars. In Higgs sectors with two scalar doublets, the exact degeneracy of scalar masses, without an artificial fine-tuning of the scalar potential parameters, is possible only in the case of the inert doublet model (IDM), where the scalar potential respects a global U(1) symmetry that is not broken by the vacuum. In the case of three doublets, we introduce and analyze the replicated inert doublet model, which possesses two inert doublets of scalars. We then generalize this model to obtain a scalar potential, first proposed by Ivanov and Silva, with a CP4 symmetry that guarantees the existence of pairwise degenerate scalar states among two pairs of neutral scalars and two pairs of charged scalars. Here, CP4 is a generalized CP symmetry with the property that (CP4) n is the identity operator only for integer n values that are multiples of 4. The form of the CP4-symmetric scalar potential is simplest when expressed in the Higgs basis, where the neutral scalar field vacuum expectation value resides entirely in one of the scalar doublet fields. The symmetries of the model permit a term in the scalar potential with a complex coefficient that cannot be removed by any redefinition of the scalar fields within the class of Higgs bases (in which case, we say that no real Higgs basis exists). A striking feature of the CP4-symmetric model is that it preserves CP even in the absence of a real Higgs basis, as illustrated by the cancellation of the contributions to the CP violating form factors of the effective ZZZ and ZWW vertices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantification of SARS-CoV-2 spike protein expression from mRNA vaccines using isotope dilution mass spectrometry

The advent of mRNA vaccine technology has been vital in rapidly creating and manufacturing COVID-19 vaccines at an industrial scale. To continue to accelerate this leading vaccine technology, an accurate method is needed to quantify antigens produced by the transfection of cells with a mRNA vaccine product. This will allow monitoring of protein expression during mRNA vaccine development and provide information on how changes to vaccine components affects the expression of the desired antigen. Developing novel approaches that allow for high-throughput screening of vaccines to detect changes in antigen production in cell culture prior to in vivo studies could aid vaccine development. Here, we have developed and optimized an isotope dilution mass spectrometry method to detect and quantify the spike protein expressed after transfection of baby hamster kidney cells with expired COVID-19 mRNA vaccines. Five peptides of the spike protein are simultaneously quantified and provide assurance that protein digestion in the region of the target peptides is complete since results between the five peptides had a relative standard deviation of less than 15 %. In addition, two housekeeping proteins, actin and GAPDH, are quantified in the same analytical run to account for any variation in cell growth within the experiment. IDMS allows a precise and accurate means to quantify protein expression by mammalian cells transfected with an mRNA vaccine.

60 APPLIED LIFE SCIENCES↗

Use of Multiple Criteria to Map the High-Temperature Scuffing Behaviorof Co-Based Superalloys

The goal of thisworkwas to rank, as quantitatively as possible, the high-temperature scuffing characteristics of a series of Co-based materials, including coatings, for possible use inwear-critical components like those in diesel engine exhaust systems and emission-controls. A cylinder pivoting on its side against a flat tilewas used as the testing geometry. All testswere performed at 600 C in air. The time-dependent torque response was recorded for each 60 min test to investigate trends in friction as surfaces roughened and debris deposits built up. Candidate materials included Stellite 6B, Pleuco 33 (a white cast iron), nitrided stainless steel Type 310, IDM 5399 (a high-silicon, molybdenum iron), and coatings of both Tribaloy T-400 and Stellite 3 on stainless steel. Measurements of the damaged areas on the scuffed tiles were used to calculate a specific normal load and plot it versus the roughness of the worn tiles to map experimental results in a way that indicated the severity of scuffing for each material combination. Data on the map were annotated to reflect visual observations of the extent of damage as well. Using this test method and the foregoing criteria, nitrided type 310 stainless steel against T-400 gave the best overall performance.

33 ADVANCED PROPULSION SYSTEMS↗

Criticism of generally accepted fundamentals and methodologies of traffic and transportation theory

It is explained why the set of the fundamental empirical features of traffic breakdown (a transition from free flow to congested traffic) should be the empirical basis for any traffic and transportation theory that can be reliable used for control and optimization in traffic networks. It is shown that generally accepted fundamentals and methodologies of traffic and transportation theory are not consistent with the set of the fundamental empirical features of traffic breakdown at a highway bottleneck. To these fundamentals and methodologies of traffic and transportation theory belong (i) Lighthill-Whitham-Richards (LWR) theory, (ii) the General Motors (GM) model class (for example, Herman, Gazis et al. GM model, Gipps’s model, Payne’s model, Newell’s optimal velocity (OV) model, Wiedemann’s model, Bando et al. OV model, Treiber’s IDM, Krauß’s model), (iii) the understanding of highway capacity as a particular stochastic value, and (iv) principles for traffic and transportation network optimization and control (for example, Wardrop’s user equilibrium (UE) and system optimum (SO) principles). Alternatively to these generally accepted fundamentals and methodologies of traffic and transportation theory, we discuss three-phase traffic theory as the basis for traffic flow modeling as well as briefly consider the network breakdown minimization (BM) principle for the optimization of traffic and transportation networks with road bottlenecks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extending the diffusion approximation to the boundary using an integrated diffusion model

The widely used diffusion approximation is inaccurate to describe the transport behaviors near surfaces and interfaces. To solve such stochastic processes, an integro-differential equation, such as the Boltzmann transport equation (BTE), is typically required. In this work, we show that it is possible to keep the simplicity of the diffusion approximation by introducing a nonlocal source term and a spatially varying diffusion coefficient. We apply the proposed integrated diffusion model (IDM) to a benchmark problem of heat conduction across a thin film to demonstrate its feasibility. We also validate the model when boundary reflections and uniform internal heat generation are present.

36 MATERIALS SCIENCE↗

Improvement of the interfacial Dzyaloshinskii-Moriya interaction by introducing a Ta buffer layer

We report systematic measurements of the interfacial Dzyaloshinskii-Moriya interaction (iDMI) by employing Brillouin light scattering in Pt/Co/AlO{sub x} and Ta/Pt/Co/AlO{sub x} structures. By introducing a tantalum buffer layer, the saturation magnetization and the interfacial perpendicular magnetic anisotropy are significantly improved due to the better interface between heavy metal and ferromagnetic layer. From the frequency shift between Stokes- and anti-Stokes spin-waves, we successively obtain considerably larger iDM energy densities (D{sub max} = 1.65 ± 0.13 mJ/m{sup 2} at t{sub Co} = 1.35 nm) upon adding the Ta buffer layer, despite the nominally identical interface materials. Moreover, the energy density shows an inverse proportionality with the Co layer thickness, which is the critical clue that the observed iDMI is indeed originating from the interface between the Pt and Co layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PAMELA, DAMA, INTEGRAL and signatures of metastable excited WIMPs

Models of dark matter with ∼ GeV scale force mediators provide attractive explanations of many high energy anomalies, including PAMELA, ATIC, and the WMAP haze. At the same time, by exploiting the ∼ MeV scale excited states that are automatically present in such theories, these models naturally explain the DAMA/LIBRA and INTEGRAL signals through the inelastic dark matter (iDM) and exciting dark matter (XDM) scenarios, respectively. Interestingly, with only weak kinetic mixing to hypercharge to mediate decays, the lifetime of excited states with δ < 2m{sub electron} is longer than the age of the universe. The fractional relic abundance of these excited states depends on the temperature of kinetic decoupling, but can be appreciable. There could easily be other mechanisms for rapid decay, but the consequences of such long-lived states are intriguing. We find that CDMS constrains the fractional relic population of ∼ 100 keV states to be ∼< 10{sup −2}, for a 1 TeV WIMP with σ{sub n} = 10{sup −40} cm{sup 2}. Upcoming searches at CDMS, as well as xenon, silicon, and argon targets, can push this limit significantly lower. We also consider the possibility that the DAMA excitation occurs from a metastable state into the XDM state, which decays via e{sup +}e{sup −} emission, which allows lighter states to explain the INTEGRAL signal due to the small kinetic energies required. Such models yield dramatic signals from down-scattering, with spectra peaking at high energies, sometimes as high as ∼ 1 MeV, well outside the usual search windows. Such signals would be visible at future Ar and Si experiments, and may be visible at Ge and Xe experiments, although γ-rays associated with nuclear excitations would complicate the signal for these heavier targets. We also consider other XDM models involving ∼ 500 keV metastable states, and find they can allow lighter WIMPs to explain INTEGRAL as well.

79 ASTRONOMY AND ASTROPHYSICS↗

A theory of dark matter

We propose a comprehensive theory of dark matter that explains the recent proliferation of unexpected observations in high-energy astrophysics. Cosmic ray spectra from ATIC and PAMELA require a WIMP (weakly interacting massive particle). with mass M{sub {chi}}{approx}500-800 GeV that annihilates into leptons at a level well above that expected from a thermal relic. Signals from WMAP and EGRET reinforce this interpretation. Limits on p and {pi}{sup 0}-{gamma}'s constrain the hadronic channels allowed for dark matter. Taken together, we argue these facts imply the presence of a new force in the dark sector, with a Compton wavelength m{sub {phi}}{sup -1} > or approx. 1 GeV{sup -1}. The long range allows a Sommerfeld enhancement to boost the annihilation cross section as required, without altering the weak-scale annihilation cross section during dark matter freeze-out in the early universe. If the dark matter annihilates into the new force carrier {phi}, its low mass can make hadronic modes kinematically inaccessible, forcing decays dominantly into leptons. If the force carrier is a non-Abelian gauge boson, the dark matter is part of a multiplet of states, and splittings between these states are naturally generated with size {alpha}m{sub {phi}}{approx} MeV, leading to the eXciting dark matter (XDM) scenario previously proposed to explain the positron annihilation in the galactic center observed by the INTEGRAL satellite; the light boson invoked by XDM to mediate a large inelastic scattering cross section is identified with the {phi} here. Somewhat smaller splittings would also be expected, providing a natural source for the parameters of the inelastic dark matter (iDM) explanation for the DAMA annual modulation signal. Since the Sommerfeld enhancement is most significant at low velocities, early dark matter halos at redshift {approx}10 potentially produce observable effects on the ionization history of the universe. Because of the enhanced cross section, detection of substructure is more probable than with a conventional WIMP. Moreover, the low velocity dispersion of dwarf galaxies and Milky Way subhalos can increase the substructure annihilation signal by an additional order of magnitude or more.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimal Eco-Driving Control of Connected and Autonomous Vehicles Through Signalized Intersections

This article focuses on the speed planning problem for connected and automated vehicles (CAVs) communicating to traffic lights. The uncertainty of traffic signal timing for signalized intersections on the road is considered. The eco-driving problem is formulated as a data-driven chance-constrained robust optimization problem. Effective red-light duration (ERD) is defined as a random variable, and describes the feasible passing time through the signalized intersections. Usually, the true probability distribution for ERD is unknown. Consequently, a data-driven approach is adopted to formulate chance constraints based on empirical sample data. This incorporates robustness into the eco-driving control problem with respect to uncertain signal timing. Dynamic programming (DP) is employed to solve the optimization problem. The simulation results demonstrate that the proposed method can generate optimal speed reference trajectories with 40% less vehicle fuel consumption, while maintaining the arrival time at a similar level compared to a modified intelligent driver model (IDM). The proposed control approach significantly improves the controller's robustness in the face of uncertain signal timing, without requiring to know the distribution of the random variable a priori.

33 ADVANCED PROPULSION SYSTEMS↗

Early prediction of tumor recurrence based on CT texture changes after stereotactic ablative radiotherapy (SABR) for lung cancer

Purpose: Benign computed tomography (CT) changes due to radiation induced lung injury (RILI) are common following stereotactic ablative radiotherapy (SABR) and can be difficult to differentiate from tumor recurrence. The authors measured the ability of CT image texture analysis, compared to more traditional measures of response, to predict eventual cancer recurrence based on CT images acquired within 5 months of treatment. Methods: A total of 24 lesions from 22 patients treated with SABR were selected for this study: 13 with moderate to severe benign RILI, and 11 with recurrence. Three-dimensional (3D) consolidative and ground-glass opacity (GGO) changes were manually delineated on all follow-up CT scans. Two size measures of the consolidation regions (longest axial diameter and 3D volume) and nine appearance features of the GGO were calculated: 2 first-order features [mean density and standard deviation of density (first-order texture)], and 7 second-order texture features [energy, entropy, correlation, inverse difference moment (IDM), inertia, cluster shade, and cluster prominence]. For comparison, the corresponding response evaluation criteria in solid tumors measures were also taken for the consolidation regions. Prediction accuracy was determined using the area under the receiver operating characteristic curve (AUC) and two-fold cross validation (CV). Results: For this analysis, 46 diagnostic CT scans scheduled for approximately 3 and 6 months post-treatment were binned based on their recorded scan dates into 2–5 month and 5–8 month follow-up time ranges. At 2–5 months post-treatment, first-order texture, energy, and entropy provided AUCs of 0.79–0.81 using a linear classifier. On two-fold CV, first-order texture yielded 73% accuracy versus 76%–77% with the second-order features. The size measures of the consolidative region, longest axial diameter and 3D volume, gave two-fold CV accuracies of 60% and 57%, and AUCs of 0.72 and 0.65, respectively. Conclusions: Texture measures of the GGO appearance following SABR demonstrated the ability to predict recurrence in individual patients within 5 months of SABR treatment. Appearance changes were also shown to be more accurately predictive of recurrence, as compared to size measures within the same time period. With further validation, these results could form the substrate for a clinically useful computer-aided diagnosis tool which could provide earlier salvage of patients with recurrence.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Converting from NIS to Redhat Identity Management

The Jefferson Lab (Jlab) accelerator controls network has transitioned to a new authentication and network service interface. The new system uses the Redhat Identity Manager (IdM) as a single integrating front end to the Lightweight Directory Access Protocol (LDAP) and a replacement for NIS and the Kerberos authentication service. This system allows for integration of access and authentication across Unix and Windows environments and across different Jlab computing environments, including across firewalls. The decision making process, conversion steps, issues and solutions will be discussed.

McGuckin, T. S.↗