Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ideal MHD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The impact of kinetic and global effects on ideal ballooning 2nd stable pedestals of conventional and low aspect-ratio tokamaks

The EPED model (Snyder et al 2011 Nucl. Fusion 51 103016) has had success in describing the pedestal structure of Type-I ELM and QH-mode plasmas in tokamaks, by combining kinetic ballooning mode (KBM) and peeling–ballooning (PB) constraints. Within EPED, the KBM constraint is often approximated by a technique using calculated ideal ballooning mode (IBM) thresholds, fit to a functional form designed to capture non-local effects. It has been noted that quantitative differences between local ideal MHD and gyro-kinetic (GK) ballooning stability can be larger at low aspect ratio. KBM critical pedestals are consistent with observations in initial studies on conventional and spherical tokamaks. In this work, the application of a reduced model for the calculation of the kinetic ballooning stability boundary is presented based on a novel and newly developed gyro-fluid system (GFS) code (Staebler et al 2023 Phys. Plasmas 30 102501). GFS is observed to capture KBMs in DIII-D as well as the NSTX pedestals, opening a route to integrating this model into EPED. Finally, high but finite $n$ global ballooning modes are observed to limit the access to the local 2nd stability and thus provide a transport mechanism that constrains the pedestal evolution with $β_{p,\textrm{ped}}$. The high $n$ global ballooning stability is approximated by its ideal MHD analog using ELITE. It is shown that nearly-local high $n$ modes with $k_yρ_s$ ~ $0.25 - 0.5$ can provide a proxy for the critical $β_{p,\textrm{ped}}$ when a 2nd stable access exists on DIII-D plasmas. The use of GFS and ELITE scaling in EPED provides improved agreement to EPED1 in an initial comparison with DIII-D pedestal data.

Anastopoulos Tzanis, Michail Savvas [Oak Ridge Nat↗

Linear gyrokinetic simulations of toroidal Alfvén eigenmodes in the Mega-Amp Spherical Tokamak

Linear gyrokinetic (GK) simulations using the Gyrokinetic Toroidal Code (GTC) have been performed to investigate Toroidicity-driven Alfvén Eigenmodes (TAEs) driven by the neutral beam injection (NBI) induced fast ions in the Mega-Amp Spherical Tokamak (MAST) to identify the non-perturbative and kinetic effects of thermal plasma. A specific TAE in MAST discharge 26887, with an on-axis NBI power of approximately 1.5 MW and plasma current around 800 kA, exhibited frequency chirping, and the tangential soft x-ray camera array resolved the radial mode structure peaked near |q|=1.5. Various excitation methods were used in the GTC linear simulations, illustrating this code's capability to realistically represent the mechanisms and behaviors of fast ion-driven TAEs in spherical tokamaks. The radial structures from these GK simulations closely match measurements and calculations performed using the NOVA ideal MHD code, though with the frequencies approximately 10 kHz lower, likely due to various kinetic and non-perturbative effects. The simulations measured the damping rates due to continuum damping, radiative damping, and ion Landau damping, revealing that ion Landau damping has the most significant contribution to the total damping rate of the TAE. A comparison of growth rates of TAEs excited by fast ion Maxwellian and slowing-down distributions shows that the TAEs excited by a fast ion anisotropic pitch distribution (as part of the slowing-down distributions) are more unstable compared to those excited by a Maxwellian distribution with an equivalent fast ion beta. This shows that the use of fast ion anisotropy alters the number of fast ions to be in shear Alfvén resonance, and hence, it can greatly affect the stability of TAEs. These tests can be performed with the GTC but impossible with ideal MHD simulations, highlighting the necessity of kinetic simulations such as the GTC for a precise prediction of the TAE stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cholla-MHD: An Exascale-capable Magnetohydrodynamic Extension to the Cholla Astrophysical Simulation Code

Abstract We present an extension of the massively parallel, GPU native, astrophysical hydrodynamics code Cholla to magnetohydrodynamics (MHD). Cholla solves the ideal MHD equations in their Eulerian form on a static Cartesian mesh utilizing the Van Leer + constrained transport integrator, the HLLD Riemann solver, and reconstruction methods at second and third order. Cholla’s MHD module can perform ≈260 million cell updates per GPU-second on an NVIDIA A100 while using the HLLD Riemann solver and second order reconstruction. The inherently parallel nature of GPUs combined with increased memory in new hardware allows Cholla’s MHD module to perform simulations with resolutions ∼500 3 cells on a single high-end GPU (e.g., an NVIDIA A100 with 80 GB of memory). We employ GPU direct Message Passing Interface to attain excellent weak scaling on the exascale supercomputer Frontier, while using 74,088 GPUs and simulating a total grid size of over 7.2 trillion cells. A suite of test problems highlights the accuracy of Cholla’s MHD module and demonstrates that zero magnetic divergence in solutions is maintained to round off error. We also present new testing and CI tools using GoogleTest, GitHub Actions, and Jenkins that have made development more robust and accurate and ensure reliability in the future.

Astronomy & Astrophysics↗

Broken Ergodicity in MHD Turbulence

Ideal magnetohydrodynamic (MHD) turbulence may be represented by finite Fourier series, where the inherent periodic box serves as a surrogate for a bounded astrophysical plasma. Independent Fourier coefficients form a canonical ensemble described by a Gaussian probability density function containing a Hermitian covariance matrix with positive eigenvalues. The eigenvalues at lowest wave number can be very small, resulting in a large-scale coherent structure: a turbulent dynamo. This is seen in computations and a theoretical explanation in terms of 'broken ergodicity' contains Taylor s theory of force-free states. An important problem for future work is the case of real, i.e., dissipative flows. In real flows, broken ergodicity and coherent structure are still expected to occur in MHD turbulence at the largest scale, as suggested by low resolution simulations. One challenge is to incorporate coherent structure at the largest scale into the theory of turbulent fluctuations at smaller scales.

Shebalin, John V.↗

The theory of kinetic effects on resistive wall mode stability in tokamaks

Tokamak fusion plasmas benefit from high pressures but are then susceptible to modes of instability. These magnetohydrodynamic (MHD) modes are macroscopic distortions of the plasma, but certain collective motions of individual particles can provide stabilizing effects opposing them. The presence of a resistive wall slows the mode growth, converting a kink to a resistive wall mode (RWM). A kinetic MHD model includes Maxwell's equations, ideal MHD constraints, and kinetic effects included through the pressure tensor, calculated with the perturbed drift-kinetic distribution function of the particles. The kinetic stabilizing effects on the RWM arise through resonances between the plasma rotation and particle drift motions: precession, bounce, and transit. A match between particle motions and the mode allows efficient transfer of energy that would otherwise drive the growth of the mode, thus damping the growth. The first approach to calculating RWM stability is to write a set of equations for the complex mode frequency in terms of known quantities and then to solve the system. The “energy principle” approach, which has the advantage of clarity in distinguishing the various stabilizing and destabilizing effects, is to change the force balance equation into an equation in terms of changes of kinetic and potential energies, and then to write a dispersion relation for the mode frequency in terms of those quantities. These methods have been used in various benchmarked codes to calculate kinetic effects on RWM stability. Importantly, the theory has illuminated the important roles of plasma rotation, energetic particles, and collisions in RWM stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Eruption and Self-Organization of Free-Surface, Arched, and Line-Tied Magnetic Flux Ropes (Final Technical Report)

Coronal mass ejections (CMEs) are some of the most energetic and violent events in our solar system. This investigation uses laboratory experiments to study the onset threshold and nonlinear consequences of ideal MHD instabilities of magnetic flux ropes where are regarded to be related CMEs, and has obtained qualitative and quantitative understanding the dynamics of magnetic flux ropes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamic (MHD) modelling of solar active phenomena via numerical methods

Numerical ideal MHD models for the study of solar active phenomena are summarized. Particular attention is given to the following physical phenomena: (1) local heating of a coronal loop in an isothermal and stratified atmosphere, and (2) the coronal dynamic responses due to magnetic field movement. The results suggest that local heating of a magnetic loop will lead to the enhancement of the density of the neighboring loops through MHD wave compression. It is noted that field lines can be pinched off and may form a self-contained magnetized plasma blob that may move outward into interplanetary space.

Wu, S. T.↗

A New Approach for a Wider Class of Entropy Split Methods for Compressible Gas Dynamics and MHD

The high order entropy split methods of Sjögreen & Yee [1, 2] by entropy splitting of the compressible Euler (inviscid) flux derivatives for a thermally-perfect gas are based on Harten’s entropy function [3, 4, 5]. Their derivation takes advantage of the homogeneity property of Euler flux, symmetrizable Euler flux derivatives and energy-norm stability in conjunction with high order classical spatial central, DRP (dispersion relation-preserving) [6, 7, 8] or Padé (compact) spatial discretizations [9] with summation-by-parts (SBP) operators [10]. Our entropy split methods have been proven entropy conserving and stable [1, 11, 12]. Our proofs do not rely on a two-point numerical flux, but rather only a linear difference operator is required to derive these methods. To extend the entropy split method for the MHD, we used the Godunov symmetrizable non-conservative MHD form [12, 13, 14]. These high order entropy split methods not only preserve certain physical properties of the chosen governing equations but are also known to either improve numerical stability, and/or minimize aliasing errors in long time integration of turbulent flow computations without the aid of added numerical dissipation. In our previous published work, extensive error norm comparison with grid refinement was performed to show the high accuracy performance of these methods. These studies also showed how well the entropy split methods conserve the entropy, momentum and mass, and preserve the kinetic energy for long time integration of the various flows [1, 2, 12, 13, 14]. The objective of the present work is to use a new approach to obtain a wider class of entropy split methods consisting of a two-point numerical flux portion and a non-conservative portion in such a way that the homogeneity property of the compressible Euler flux is not required. For high order classical spatial central, DRP (dispersion relation-preserving) or Padé (compact) spatial discretizations, this new approach can be proven to be entropy conservative with conservative spatial dsicretizations while at the same time allowing a wider class of symmetrizable inviscid flux derivatives. We also use this generalization to derive an entropy split scheme that is entropy conserving for the equations of MHD without the homogeneity property using the Godunov symmetrizable ideal MHD formulation [15].

High Order Physical Preserving Methods↗

Parametric dependencies of resonant layer responses across linear, two-fluid, drift-MHD regimes

Non-axisymmetric magnetic fields arising in a tokamak either by external or internal perturbations can induce complex non-ideal MHD responses in their resonant surfaces while remaining ideally evolved elsewhere. This layer response can be characterized in a linear regime by a single parameter called the inner-layer Delta, which enables outer-layer matching and the prediction of torque balance to non-linear island regimes. Here, we follow strictly one of the most comprehensive analytic treatments including two-fluid and drift MHD effects and keep the fidelity of the formulation by incorporating the numerical method based on the Riccati transformation when quantifying the inner-layer Delta. The proposed scheme reproduces not only the predicted responses in essentially all asymptotic regimes but also with continuous transitions as well as improved accuracies. In particular, the Delta variations across the inertial regimes with viscous or semi-collisional effects have been further resolved, in comparison with additional analytic solutions. The results imply greater shielding of the electromagnetic torque at the layer than what would be expected by earlier work when the viscous or semi-collisional effects can compete against the inertial effects, and also due to the intermediate regulation by kinetic Alfven wave resonances as rotation slows down. These are important features that can alter the nonaxisymmetric plasma responses including the field penetration by external fields or island seeding process in rotating tokamak plasmas.

MHD instability↗

Parametric dependencies of resonant layer responses across linear, two-fluid, drift-MHD regimes

Non-axisymmetric magnetic fields arising in a tokamak either by external or internal perturbations can induce complex non-ideal MHD responses in their resonant surfaces while remaining ideally evolved elsewhere. This layer response can be characterized in a linear regime by a single parameter called the inner-layer Δ, which enables outer-layer matching and the prediction of torque balance to non-linear island regimes. In this work, we follow strictly one of the most comprehensive analytic treatments including two-fluid and drift MHD effects and keep the fidelity of the formulation by incorporating the numerical method based on the Riccati transformation when quantifying the inner-layer Δ. The proposed scheme reproduces not only the predicted responses in essentially all asymptotic regimes but also with continuous transitions as well as improved accuracies. In particular, the Δ variations across the inertial regimes with viscous or semi-collisional effects have been further resolved, in comparison with additional analytic solutions. The results imply greater shielding of the electromagnetic torque at the layer than what would be expected by earlier work when the viscous or semi-collisional effects can compete against the inertial effects, and also due to the intermediate regulation by kinetic Alfvén wave resonances as rotation slows down. These are important features that can alter the non-axisymmetric plasma responses including the field penetration by external fields or island seeding process in rotating tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Importance of resistivity on edge-localized mode onset in spherical tokamaks

In this work, we explore the impact of realistic plasma resistivity on the linear stability of peeling-ballooning (PB) modes in tokamak discharges with low-aspect ratio. For this study we consider discharges that are subject to edge-localized modes (ELMs) in the National Spherical Torus Experiment (NSTX). Employing the state of the art extended-magnetohydrodynamic (MHD) code M3D-C1 it is demonstrated that non-ideal effects can significantly affect PB stability thresholds in NSTX discharges. In particular, robust resistive PB modes are found to exist well before the ideal PB stability threshold is met. These novel results can explain why ideal-MHD theory often does not accurately describe ELM onset in spherical torus configurations, and also present a valuable basis for the development of a predictive model for ELMs in low-aspect ratio tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effects on the MHD stability of field line tying to the end faces of a cylindrical magnetic loop

The ideal MHD energy equation is used to derive a stability equation for a specific class of perturbations, in an examination of magnetic loop MHD stability which takes field line tying at its root points into account. It is found that the field line tying effect is negligible to the m=1 kink mode, but important to the localized modes, in the case of a loop of aspect ratio greater than 10. The stability criterion for high-m value localized modes is derived, and compared with the Suydam criterion, to show that there are two field line tying effects for the perturbation of the class studied: (1) a field line bending effect, which is always stabilizing, and (2) a shear effect which is stabilizing or destabilizing depending on the sign of the gradient of the potential magnetic field. The net effect of field line tying is determined by the sum of these two effects.

An, C. Y.↗

Io's Plasma Environment During the Galileo Flyby: Global Three-Dimensional MHD Modeling with Adaptive Mesh Refinement

The first results for applying a three-dimensional multimedia ideal MHD model for the mass-loaded flow of Jupiter's corotating magnetospheric plasma past Io are presented. The model is able to consider simultaneously physically realistic conditions for ion mass loading, ion-neutral drag, and intrinsic magnetic field in a full global calculation without imposing artificial dissipation. Io is modeled with an extended neutral atmosphere which loads the corotating plasma torus flow with mass, momentum, and energy. The governing equations are solved using adaptive mesh refinement on an unstructured Cartesian grid using an upwind scheme for AHMED. For the work described in this paper we explored a range of models without an intrinsic magnetic field for Io. We compare our results with particle and field measurements made during the December 7, 1995, flyby of to, as published by the Galileo Orbiter experiment teams. For two extreme cases of lower boundary conditions at Io, our model can quantitatively explain the variation of density along the spacecraft trajectory and can reproduce the general appearance of the variations of magnetic field and ion pressure and temperature. The net fresh ion mass-loading rates are in the range of approximately 300-650 kg/s, and equivalent charge exchange mass-loading rates are in the range approximately 540-1150 kg/s in the vicinity of Io.

Combi, M. R.↗

MHD Simulations of Earth's Bow Shock at low Mach Numbers: Standoff Distances

Global, three-dimensional, ideal MHD simulations of Earth's bow shock are reported for low Alfven Mach numbers M(sub A) and quasi-perpendicular magnetic field orientations. The simulations use a hard, infinitely conducting magnetopauause obstacle, with axisymmetric three-dimensional location given by scaled standard model, to directly address previous gasdynamic (GD) and field-aligned MHD (FA-MHD) work. Tests of the simulated shocks' density jumps X for 1.4 approx. less than MA approx. less than 10 and the high M(sub A) shock location, and reproduction of the GD relation between magnetosheath thickness and X for quasi-gasdynamic MHD runs with M(sub A) much greater than M(sub s), confirm that the MHD code is working correctly. The MHD simulations show the standoff distance a(sub s), increasing monotonically with decreasing M(sub A). Significantly larger a(sub s), are found at low M(sub A) than predicted by GD and phenomenological MHD models and FA-MHD simulations, as required qualitatively by observations. The GD and FA-MHD predictions err qualitatively, predicting either constant or decreasing a(sub s), with decreasing M(sub A). This qualitative difference between quasi- perpendicular MHD and FA-MHD simulations is direct evidence for a(sub s), depending on the magnetic field orientation Theta. The enhancement factor over the phenomenological MHD predictions at MA approx. 2.4 agrees quantitatively with one observatiorial estimate. A linear relationship is found between the magnetosheath thickness and X, modified both quantitatively and intrinsically by MHD effects from the GD result. The MHD and GD results agree in the high M(sub A) limit. An MHD theory is developed for a(sub s), restricted to sufficiently perpendicular Theta and high sonic Mach numbers M(sub s). It explains the simulation results with excellent accuracy. Observational and further simulation testing of this MHD theory, and of its predicted M(sub A), Theta, and M(sub s) effects, is desirable.

Cairns, Iver H.↗

MHD simulation of a propagation of loop-like and bubble-like magnetic clouds

Propagation and evolution of magnetic clouds in the ambient solar wind flow is studied self-consistently using ideal MHD equations in three dimensions. Magnetic clouds as ideal force-free objects (cylinders or spheres) are ejected near the Sun and followed beyond the Earth's orbit. We investigate the influence of various initial parameters like the injection velocity, magnetic field strength, magnetic helicity, orientation of the clouds' axis, etc., on their propagation and evolution. We demonstrate that the injection velocity and magnetic field strength have a major influence on propagation. Simulation results are compared with analytical solutions of magnetic cloud evolution.

Vandas, M.↗

Variability of MHD instabilities in benign termination of high-current runaway electron beams in the JET and DIII-D tokamaks

Benign termination, in which magnetohydrodynamic (MHD) instabilities deconfine runaway electrons (REs) following hydrogenic injections, is a promising strategy for mitigating dangerous RE loads after disruptions. Recent experiments on the Joint European Torus (JET) have explored this scenario at higher pre-disruptive plasma currents than are achievable on other devices, revealing challenges in obtaining benign terminations at I p ≥2.5 MA. This work analyzes the evolution of these high-current RE beams and their terminating MHD events using fast magnetic sensor measurements and EFIT equilibrium reconstructions for approximately 40 JET and 20 DIII-D tokamak discharges. On JET, unsuccessful non-benign terminations occur at low edge safety factor (q edge ≈ 2), and are preceded by intermittent, non-terminating MHD events at higher rational qedge. Trends in the internal inductance I i indicate more peaked RE current profiles in the high-I p non-benign population, which may hinder successful recombination through re-ionization of the companion plasma. In contrast, benign terminations on JET typically occur at higher q edge ≥3 and exhibit less peaked RE current profiles. DIII-D displays a broader range of terminating edge safety factors, again correlated with the measured values. Across both tokamaks, the RE current peaking is therefore found to determine which MHD instability boundary is encountered, a result confirmed by linear resistive MHD modeling with the CASTOR3D code. Measured growth rates are similar for benign and non-benign cases, indicating that ideal MHD timescales at low density after hydrogenic injection do not alone explain efficient RE deconfinement. Instead, non-benign cases are most readily characterized by their comparably lower overall MHD perturbation amplitudes δB. These observations suggest that the interplay between ideal and resistive dynamics governs the termination process, with implications for extrapolating benign RE termination to high-I p reactor scenarios.

MHD instabilities↗

Forced Reconnection in the Near Magnetotail: Onset and Energy Conversion in PIC and MHD Simulations

Using two-dimensional particle-in-cell (PIC) together with magnetohydrodynamic (MHD) Q1 simulations of magnetotail dynamics, we investigate the evolution toward onset of reconnection and the subsequent energy transfer and conversion. In either case, reconnection onset is preceded by a driven phase, during which magnetic flux is added to the tail at the high-latitude boundaries, followed by a relaxation phase, during which the configuration continues to respond to the driving. The boundary deformation leads to the formation of thin embedded current sheets, which are bifurcated in the near tail, converging to a single sheet farther out in the MHD simulations. The thin current sheets in the PIC simulation are carried by electrons and are associated with a strong perpendicular electrostatic field, which may provide a connection to parallel potentials and auroral arcs and an ionospheric signal even prior to the onset of reconnection. The PIC simulation very well satisfies integral entropy conservation (intrinsic to ideal MHD) during this phase, supporting ideal ballooning stability. Eventually, the current intensification leads to the onset of reconnection, the formation and ejection of a plasmoid, and a collapse of the inner tail. The earthward flow shows the characteristics of a dipolarization front: enhancement of Bz, associated with a thin vertical electron current sheet in the PIC simulation. Both MHD and PIC simulations show a dominance of energy conversion from incoming Poynting flux to outgoing enthalpy flux, resulting in heating of the inner tail. Localized Joule dissipation plays only a minor role.

two-dimensional↗