Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ideal MHD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Bifurcations of the magnetic axis and the alternating-hyperbolic sawtooth

Here we present a sawtooth model that explains observations where the central safety factor, q 0 , stays well below one, which is irreconcilable with current models that predict a reset to q 0 = 1 after the crash. We identify the structure of the field around the magnetic axis with elements of the Lie group $\mathrm{SL}(2,\ \mathbb{R})$ and find a transition to an alternating-hyperbolic geometry when q 0 = 2/3. This transition is driven by an ideal MHD instability and leads to a chaotic magnetic field near the axis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A stable corridor for toroidal plasma compression

In this study, a toroidal plasma compressed by a collapsing flux conserver is analyzed to reveal stable scenarios of operation to high compression ratios. The resistive and ideal MHD stability is calculated in full toroidal geometry, using the asymptotic matching method in realistic conditions, and comparing with nonlinear simulations. The near edge current profile, controlled by toroidal field ramping during compression, is shown to be critical to stability due to coupling between poloidal components of the least stable mode. The extension of a length of shaft on axis is also found to be critical at high compression, as the resulting good curvature region in magnetic field stabilizes pressure driven modes that would otherwise be unstable. This work extends from previous studies, which initially showed the existence of a stable scenario, to include findings of more extensive stable zones, detailed effects of geometry, and nonlinear simulations of the instabilities. The nonlinear simulations of the compression are consistent with the linear analyses, confirming both the conservation and stability properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Nonlinear two-fluid modeling of plasma response to RMPs for the ELM control in the ITER baseline

Numerical modeling, combining the toroidal ideal MHD code GPEC and the nonlinear two-fluid MHD code TM1, was used for comprehensive studies of the plasma response to resonant magnetic perturbations (RMPs) with toroidal mode number n = 1–5 for controlling edge-localized modes (ELMs) in ITER for the standard operation scenario (15 MA Q = 10). Several issues related to RMP ELM control are investigated, including the optimization of the RMP coils configuration, the evaluation of the magnitude of density pump-out and the q95 windows of ELM suppression. GPEC calculates the magnetic response, which consistently includes the very important edge kink/peeling response to static magnetic perturbations. Furthermore, GPEC two-dimensional scans of the relative coil current phasing among the three rows of internal coils, at fixed coil current amplitude, reveal the optimal phasing for the RMP coil configuration with n = 1–5, respectively. The poloidal half wavelength of resonant mode at the edge of plasma calculated by GPEC indicates that the midplane row coils have the best resonant coupling with the plasma for n = 2, while the upper and lower row coils have the best resonant coupling with the plasma for n = 3. Based on the plasma kinetic equilibrium and the GPEC calculations of the magnetic response, TM1 was used to simulate the conditions for RMP field penetration in the ITER pedestal. TM1 shows magnetic island formation at the foot of ITER pedestal with RMP coil current threshold ranging from 4 kAt to 8 kAt with n = 2 to 4. These magnetic islands at the pedestal-foot lead to density pump-out, the magnitude of which scales as ${I}_{\text{RMP}}^{0.5}$ and ranges from 5% to 20% at the pedestal-top when scanning the coil current from 4 to 60 kAt. The density pump-out is found to be weaker for higher n RMP. The nonlinear TM1 simulations also show field penetration at the pedestal-top, where the threshold of RMP coil current depends on the q 95 . The alignment of the magnetic island and the location of the pedestal-top decreases the height and width of the pedestal to suppress ELMs. Simulations by two-dimensional scans of RMP coil current and q 95 reveal the accessible q 95 windows of ELM suppression for both n = 3 and 4 RMPs. The predicted q 95 windows of ELM suppression are very similar to the ones in currently operating tokamaks and the required RMP coil current for ELM suppression is less than 40–50 kAt, which is well within the designed capability for ITER. In addition, the simulations indicate that wide q 95 windows of ELM suppression may be accessible in ITER by operating with dominant n = 4 (or n = 5) RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Pellet triggering of edge localized modes in low collisionality pedestals at DIII-D

Edge localized modes (ELMs) are triggered using deuterium pellets injected into plasmas with ITER-relevant low collisionality pedestals, and the resulting peak ELM energy fluence is reduced by approximately 25%–50% relative to natural ELMs destabilized at similar pedestal pressures. Cryogenically frozen deuterium pellets are injected from the low-field side of the DIII-D tokamak at frequencies lower than the natural ELM frequency, and heat flux is measured by infrared cameras. Ideal MHD pedestal stability calculations show that without pellet injection, these low collisionality pedestals were limited by their current density (peeling-limited) rather than their pressure gradient (ballooning-limited). ELM triggering success correlates strongly with pellet mass, consistent with the theory that a large pressure perturbation is required to trigger an ELM in low collisionality discharges that are far from the ballooning stability boundary. For sufficiently large pellets, both instantaneous and time-integrated ELM energy deposition measured by infrared cameras is reduced with respect to naturally occurring ELMs at the inner strike point, which is the position where it is largest for natural ELMs. Energy fluence at the outer strike point is less effected. Cameras observing both heat flux and D-alpha emission often find significant toroidally asymmetric striations in the outboard far scrape-off layer resulting from ELMs that are triggered by pellets. Toroidal asymmetries at the inner strike point are similar between natural and pellet-triggered ELMs, indicating that the reduction in peak heat flux and total fluence at that location is robust for the conditions reported here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Numerical studies on saturated kink and sawtooth induced fast ion transport in JET ITER-like plasmas

Here, this presentation examines the energetic particle transport induced by saturated kink modes and sawtooth crashes in JET deuterium plasmas. It is known that kink mode-resonant transport and phase-space redistribution from sawtooth crashes can drive strong fast ion transport with dependencies on particle pitch and energy. Measurements with JET's Faraday cup fast ion loss detector array have shown that the internal kink growth phase preceding sawtooth crashes produces substantial fast ion losses. This report will numerically investigate the dominant energetic particle transport mechanism with a detailed examination of the fast ion phase-space dependencies, resonances, orbit topology changes, induced losses, and redistribution associated with the long-lived, resonant, kink mode and non-resonant sawtooth crash. The ORBIT-kick model forms the basis of the transport studies with realistic fast ion distributions produced from TRANSP. A recently created reduced model for sawtooth induced transport is used while the saturated kink modes are modeled with ideal MHD codes. The simulations were further validated against experiment with a newly developed synthetic Faraday cup fast ion loss detector in addition to scintillator probe and neutron measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

MAS: A versatile Landau-fluid eigenvalue code for plasma stability analysis in general geometry

We have developed a new global eigenvalue code, Multiscale Analysis for plasma Stabilities (MAS), for studying plasma problems with wave toroidal mode number (n) and frequency (ω) in a broad range of interest in general tokamak geometry, based on a five-field Landau-fluid description of thermal plasmas. Beyond keeping the necessary plasma fluid response, we further retain the important kinetic effects including diamagnetic drift, ion finite Larmor radius, finite parallel electric field (E||), ion and electron Landau resonances in a self-consistent and non-perturbative manner without sacrificing the attractive efficiency in computation. The physical capabilities of the code are evaluated and examined in the aspects of both theory and simulation. In theory, the comprehensive Landau-fluid model implemented in MAS can be reduced to the well-known ideal MHD model, electrostatic ion-fluid model, and drift-kinetic model in various limits, which clearly delineates the physics validity regime. In simulation, MAS has been well benchmarked with theory and other gyrokinetic and kinetic-MHD hybrid codes in a manner of adopting the unified physical and numerical framework, which covers the kinetic Alfv\'en wave (KAW), ion sound wave (ISW), low-n kink, high-n ion temperature gradient mode (ITG) and kinetic ballooning mode (KBM). Moreover, MAS is successfully applied to model the Alfv\'en eigenmode (AE) activities in DIII-D discharge #159243, which faithfully captures the frequency sweeping of reversed shear Alfv\'en eigenmode (RSAE), the tunneling damping of toroidal Alfv\'en eigenmode (TAE), as well as the polarization characteristics of kinetic beta-induced Alfv\'en eigenmode (KBAE) and beta-induced Alfv\'en-acoustic eigenmode (BAAE) being consistent with former gyrokinetic theory and simulation. With respect to the key progress contributed to the community, MAS has the advantage of combining rich physics ingredients, realistic global geometry and high computation efficiency together for plasma stability analysis in linear regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Predicted thresholds for RMP ELM suppression access in double-null configurations

Modeling of DIII-D plasmas spanning shapes from single to double-null (DN) reveals new insights into the nature of resonant magnetic perturbation (RMP) conditions necessary for edge-localized mode (ELM) suppression. The suppression of ELMs with RMPs has proven difficult in DN configurations, where no device has thus far reported any hints of suppression. Modeling using the GPEC code finds a reduced high-field side response closer to DN shaping. The resulting synthetic diagnostic measurements are consistent with what has been observed in experiments on DIII-D, validating the plasma response model in this regime. While common metrics for suppression do not illustrate a clear distinction between single-null (SN) and DN cases, the pedestal top resonant field does show a ∼20% decrease at DN shaping in modeling. Field penetration is assessed using linear tearing theory, which demonstrates a lack of sufficient pedestal top resonant flux in the DN shape, requiring at least 1.5 × greater RMP coil currents than what was used in experiment. Analysis from drift kinetic simulations further indicate up to 2 × larger critical island widths are required at the pedestal top for tearing mode growth compared to SN cases. Effective island widths inferred from 3D ideal MHD are also analyzed, where maximum widths in lab coordinates indicate a threshold of ∼18–24× the ion gyroradius for sufficient profile flattening for ELM suppression. These results suggest that ELM suppression may be possible in DN with sufficiently large RMP coil amplitude. Future prospects of achieving RMP ELM suppression in the DN configuration may involve going to lower triangularity, which is also highlighted in this work.

RMP ELM suppression↗
DOE OSTI2026

Comprehensive analytical model of the dynamic 𝑍 pinch

In this work we present an analytical 1D axisymmetric model describing the evolution of the dynamic 𝑍 pinch. This model is capable of predicting the trajectories of the imploding sheath's magnetic piston and preceding shock front, along with the velocity, pressure, density, and magnetic field profiles, for any time-dependent current, spatially varying initial density profile, and weak initial axial field. The implosion is divided into stages, with each stage described by a set of coupled ordinary differential equations derived from the ideal MHD equations. Comparisons with experimental data from the COBRA pulsed-power facility are quite promising and imply this model could prove useful in designing and analyzing future pulsed-power experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Final report of activities for the LDRD-express project #223796 titled: “Fluid models of charged species transport: numerical methods with mathematically guaranteed properties”, PI: Ignacio Tomas, Co-PI: John Shadid

This report summarizes the findings and outcomes of the LDRD-express project with title “Fluid models of charged species transport: numerical methods with mathematically guaranteed properties”. The primary motivation of this project was the computational/mathematical exploration of the ideas advanced aiming to improve the state-of-the-art on numerical methods for the one-fluid Euler-Poisson models and gain some understanding on the Euler-Maxwell model. Euler-Poisson and Euler-Maxwell, by themselves are not the most technically relevant PDE plasma-models. However, both of them are elementary building blocks of PDE-models used in actual technical applications and include most (if not all) of their mathematical difficulties. Outside the classical ideal MHD models, rigorous mathematical and numerical understanding of one-fluid models is still a quite undeveloped research area, and the treatment/understanding of boundary conditions is minimal (borderline non-existent) at this point in time. This report focuses primarily on bulk-behaviour of Euler-Poisson’s model, touching boundary conditions only tangentially.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Fast Particle-Wave Interactions and Alfvén Eigenmodes in JET Tokamak Plasmas

This document serves as the closeout report of DOE Grant Award No. DE-FG02-99ER54563 with project period 1 April 2015 through 31 March 2020. The project comprised the international collaboration between MIT and EU scientists on the JET facility to improve our understanding of the physics of energetic particle-wave interactions by measuring the damping rates of stable Alfvén Eigenmodes (AEs) and unstable energetic particle driven modes. More specifically, this project involved the continued participation of MIT, the Culham Centre for Fusion Energy, the Swiss Plasma Center, and theorists from various European laboratories and from UC Irvine. Past contributions from the University of São Paulo are gratefully acknowledged. The Alfvén Eigenmode Active Diagnostic (AEAD) on JET discharges was successfully upgraded in this period and has extracted physically useful information, in primarily deuterium plasma discharges. It is expected that such experiments would be continued during the DT campaign in CY 2021 to assess the damping rates of similar modes in the presence of alpha particles, a product of fusing burning plasma. Only JET would carry out such experiments in the near term in the world. It is important to note that this collaboration was continued under DOE Grant Award No. DE-SC0014264 from 1 April 2020 through the present. In this grant period, the AEAD was upgraded with a set of individual amplifiers for each of a set of six antennas in two toroidally opposite locations. These new amplifiers allowed targeted selection of the antennas’ toroidal spectrum for AEs of interest with toroidal mode number | n | ≤ 20. The resonant detection and measurement of the damping rates of AEs was obtained from magnetic probes that could be compared with theory and simulations. This is a key topic of investigation for ITER and all other next-step fusion experiments, where such modes will interact with energetic particles produced by fusion reactions (alpha particles), Neutral Beam Injection (NBI) and Ion Cyclotron Resonance Heating (ICRH). The majority of the observations during this period were of Toroidal Alfvén Eigenmodes (TAEs) as these are most commonly observed on JET; a number of measurements were made during dedicated TAE experiments. However, a new set of lower frequency band filters were procured with the goal of studying Geodesic Acoustic Modes (GAMs), Beta (Acoustic) AEs (BAE/BAAEs), and Reverse Shear AEs (RSAEs), also predicted by theory. Commissioning and optimizations were successfully completed in this period, and the diagnostic has been in operation during the more recent JET campaigns. Initial results have been obtained in dedicated TAE experiments and successfully compared to drift-kinetic theory. A wide range of theoretical studies have been undertaken in support of the upcoming JET campaigns experiments. To supplement the ongoing use of ideal MHD codes, such as MISHKA during the studies of TAEs, gyrokinetic simulations of low frequency AEs were performed in collaboration with UC Irvine. The Gyrokinetic Toroidal Code (GTC) was used to determine the structure, frequencies and stability of AEs in JET plasmas. Thus, a solid scientific foundation has been laid for future DT campaigns in JET in the 2021 operation period when the damping rates of relevant modes in the presence of alpha particles could be assessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Physics-Based Real-time Analysis and Control to Achieve Transient-Free Operations for the ITER Era (Final Report)

This is the final report for the early career award for Prof. Egemen Kolemen that aimed to develop the physics and technical basis of real-time transient – i.e. disruptions and Edge Localized Modes (ELMs) – avoidance and feedback control at the DIII-D nuclear fusion facility for the ITER era. During this project, we reconstructed high quality real-time DIII-D equilibria using kinetic information from the motional Stark effect (MSE), Thomson Scattering (TS), and Charge Exchange Recombination (CER) spectroscopy. These equilibria were analyzed in real-time to determine the low-n ideal MHD stability and the pedestal stability thresholds, and to obtain plasma response models. These calculations were used to understand which physical process evolves to lead to the onset of disruption in ITER-relevant scenarios at DIII-D, and how disruption can be predicted using stability analysis as opposed to the current methods of correlation of various signals, which are descriptive but lack predictive power. In the disruption studies, we focused on tearing modes, since these constitute the vast majority of disruptions in this regime. With this knowledge, real-time disruption avoidance algorithms were developed and tested. The enhanced situation awareness and physics insight were used in advanced real-time feedback control of pedestal and core profiles, which allowed the pursuit and sustainment of transient-free high-confinement regimes that cannot be achieved via feed-forward design based on in-between shot analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Tech-X contributions to the Center for Tokamak Transients (CTTS) Scientific Discovery through Advanced Computing (SciDAC) project (Final Report)

The Center for Tokamak Transients Simulations (CTTS) consists of computational plasma physicists, computer scientists, and applied mathematicians who are together developing and applying simulation software to improve our understanding of and ability to predict and control transient events in tokamak discharges, particularly those that lead to violent disruptions. We have major simulation activities concerning disruptions that are caused by violating ideal MHD stability criteria, vertical displacement events, resistive wall modes, and tearing modes. We are performing comprehensive modeling of disruption mitigation techniques, particularly by shattered pellet injection (SPI). The Center is built around two mature extended MHD codes: NIMROD and M3D-C1. These codes are being extended in a number of ways as required by the demands of disruption modeling, and are being optimized to work well for larger problem size and modern computer architectures as required to model tokamak plasmas with realistic parameters over the required timescales. The codes will be coupled to the FronTier code for state-of-the-art modeling of SPI. Validation with experimental data on DIII-D, NSTX, and JET is being facilitated by rigorous uncertainty quantification (UQ). The high-level objectives of the center are to: (1) Develop better understanding and improved predictive capability of when crossing a linear stability boundary will likely lead to a disruption, (2) Provide a tool for calculating vessel forces, both axisymmetric and non-axisymmetric, for worst case VDE and other disruptions in tokamaks, (3) Develop increased understanding and improved predictive capability for locked mode disruptions and how best to avoid them, (4) Develop, verify, and validate 3D models for disruption mitigation by shattered pellets that can be used to design and optimize a system for future tokamaks, and (5) Increase the efficiency and scalability of the M3D-C1 and NIMROD codes so that they can model disruptions in ITER scale devices using the most powerful DOE HPC hardware, and (6) Demonstrate code-coupling via FronTier coupling with NIMROD and M3D-C1 and by interfacing these codes within a WDM framework.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Magnetorotational instability in a swirling partially ionized gas

ABSTRACT The magnetorotational instability (MRI) has been proposed as the method of angular momentum transport that enables accretion in astrophysical discs. However, for weakly ionized discs, such as protoplanetary discs, it remains unclear whether the combined non-ideal magnetohydrodynamic (MHD) effects of Ohmic resistivity, ambipolar diffusion, and the Hall effect make these discs MRI stable. While much effort has been made to simulate non-ideal MHD MRI, these simulations make simplifying assumptions and are not always in agreement with each other. Furthermore, it is difficult to directly observe the MRI astrophysically because it occurs on small scales. Here, we propose the concept of a swirling gas experiment of weakly ionized argon gas between two concentric cylinders threaded with an axial magnetic field that can be used to study non-ideal MHD MRI. For our proposed experiment, we derive the hydrodynamic equilibrium flow and a dispersion relation for MRI that includes the three non-ideal effects. We solve this dispersion relation numerically for the parameters of our proposed experiment. We find it should be possible to produce a non-ideal MRI in such an experiment because of the Hall effect, which increases the MRI growth rate when the vertical magnetic field is anti-aligned with the rotation axis. As a proof of concept, we also present experimental results for a hydrodynamic flow in an unmagnetized prototype. We find that our prototype has a small, but non-negligible, α-parameter that could serve as a baseline for comparison to our proposed magnetized experiment, which could be subject to additional turbulence from the MRI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Hamiltonian formulations for perturbed dissipationless plasma equations

The Hamiltonian formulations for the perturbed Vlasov–Maxwell equations and the perturbed ideal magnetohydrodynamics (MHD) equations are expressed in terms of the perturbation derivative ∂ F / ∂ ϵ ≡ [ F , S ] of an arbitrary functional F [ ψ ] of the Vlasov–Maxwell fields ψ = ( f , E , B ) or the ideal MHD fields ψ = ( ρ , u , s , B ) , which are assumed to depend continuously on the (dimensionless) perturbation parameter ϵ . In this study, [ , ] denotes the functional Poisson bracket for each set of plasma equations and the perturbation action functional S is said to generate dynamically accessible perturbations of the plasma fields. The new Hamiltonian perturbation formulation introduces a framework for functional perturbation methods in plasma physics and highlights the crucial roles played by polarization and magnetization in Vlasov–Maxwell and ideal MHD perturbation theories. One application considered in this paper is a formulation of plasma stability that guarantees dynamical accessibility and leads to a natural generalization to higher-order perturbation theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Core-Pedestal Plasma Configurations in Advanced Tokamaks

Here, several configurations for the core and pedestal plasma are examined for a predefined tokamak design by implementing multiple heating/current drive (H/CD) sources to achieve an optimum configuration of high fusion power in a noninductive operation while maintaining an ideally magnetohydrodynamic (MHD) stable core plasma using the IPS-FASTRAN framework. IPS-FASTRAN is a component-based lightweight coupled simulation framework that is used to simulate magnetically confined plasma by integrating a set of high-fidelity codes to construct the plasma equilibrium (EFIT, TOQ, and CHEASE), calculate the turbulent heat and particle transport fluxes (TGLF), model various H/CD systems (TORIC, TORAY, GENRAY, and NUBEAM), model the pedestal pressure and width (EPED), and estimate the ideal MHD stability (DCON). The TGLF core transport model and EPED pedestal model are used to self-consistently predict plasma profiles consistent with ideal MHD stability and H/CD (and bootstrap) current sources. In order to evaluate the achievable and sustainable plasma beta, varying configurations are produced ranging from the no-wall stability to with-wall stability regimes, simultaneously subject to the self-consistent TGLF, EPED, and H/CD source profile predictions that optimize configuration performance. The pedestal density, plasma current, and total injected power are scanned to explore their impact on the target plasma configuration, fusion power, and confinement quality. A set of fully noninductive scenarios are achieved by employing ion-cyclotron, neutral beam injection, helicon, and lower-hybrid H/CDs to provide a broad profile for the total current drive in the core region for a predefined tokamak design. These noninductive scenarios are characterized by high fusion gain (Q ~ 4) and power (P fus ~ 600 MW), optimum confinement quality (H 98 ~ 1.1), and high bootstrap current fraction (f BS ~ 0.7) for Greenwald fraction below unity. The broad current profile configurations identified are stable to low-n kink modes either because the normalized pressure β N is below the no-wall limit or a wall is present.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

W7-X and the sawtooth instability: towards realistic simulations of current-driven magnetic reconnection

Magnetic reconnection in W7-X is studied by means of global numerical simulations in a series of models of increasing complexity. The magnetic geometry ranges from that of a cylinder to the full three-dimensional field of W7-X, and the equations solved range from ideal magnetohydrodynamics (MHD) to gyrokinetics. We simulate plasmas from the first operation phase with electron cyclotron current drive (ECCD). These are characterized by an equilibrium magnetic field featuring an ECCD-distorted 'humped' profile of the rotational transform ι, with ι = 1 in two radial locations. Such plasmas generally show sawtooth activity, hence motivating the present study. We pay particular attention to the role of equilibrium current density gradients in the destabilization of reconnecting modes. When the equilibrium temperature and density gradients are artificially suppressed (to eliminate the pressure gradient drive), the perturbed electrostatic potential is radially localized between the locations at which ι = 1. This is shown with a purely collisionless gyrokinetic model, in cylindrical geometry. In the real toroidal geometry of W7-X, for a non-ideal MHD model including a uniform resistivity, electron inertia and (numerical) viscosity, the same qualitative behaviour is observed. In particular, even if a resonant (m, n) = (1, -1) perturbation is initialized, the most unstable mode is the (m, n) = (-4, 4), where m and n are the poloidal and toroidal mode numbers, respectively. Other modes are destabilized due to geometric coupling. The growth rate of this instability scales as η 1/3 , where η is the plasma resistivity, thus suggesting that ECCD drives ideal MHD stable W7-X plasmas towards non-ideal marginality. An ideal magnetohydrodynamic analysis confirms the result. A fluid-kinetic hybrid version of the EUTERPE code shows that gyrokinetic ions have a stabilizing effect on these modes. For W7-X relevant collisionalities, the growth rate scales linearly with the electron skin depth, d e . Implications of our results for sawtoothing W7-X operation are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Verification of global gyrokinetic simulation of low frequency mode excited by thermal plasma in spherical tokamak

A low frequency Alfven eigenmode in the ST40 spherical tokamak (ST) is found to be resonantly excited by thermal ions from global gyrokinetic GTC simulations. The analyses of phase-space resonances and wave-particle energy exchanges show that the Beta-induced Alfvén-Acoustic Eigenmode (BAAE) is primarily driven unstable by thermal ions, but is stabilized by energetic particles (EPs). When all kinetic effects are artificially suppressed, GTC simulations in the ideal magnetohydrodynamic (MHD) limit confirm the existence of the MHD eigenmode with a frequency in the BAAEs gap, as previously found by the ideal MHD code NOVA. The kinetic effects of thermal ions induce a frequency downshift compared to the stable BAAE in the MHD simulations. These results support the verification for global gyrokinetic simulations of the BAAE in the ST. However, the simulations do not explain the experimental observations of the BAAE in the ST40, possibly owing to the limitation of the collisionless gyrokinetic Monte Carlo model for the EPs.

Alfvén eigenmode↗
DOE OSTI2026

Narrow operator models of stellarator equilibria in Fourier Zernike basis

Numerical computation of the ideal magnetohydrodynamic (MHD) equilibrium magnetic field is at the base of stellarator optimisation and provides the starting point for solving more sophisticated partial differential equations like transport or turbulence models. Conventional approaches solve for a single stationary point of the ideal MHD equations, which is fully defined by three invariants and the numerical scheme employed by the solver. We present the first numerical approach that can solve for a continuous distribution of equilibria with fixed boundary and rotational transform, varying only the pressure invariant. This approach minimises the force residual by optimising parameters of multilayer perceptrons that map from a scalar pressure multiplier to the Fourier Zernike basis as implemented in the modern stellarator equilibrium solver DESC.

fusion plasma↗