Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Morphological stability in the presence of fluid flow in the melt

Recent experiments have shown that the presence of a vertical buoyancy-driven flow adjacent to an initially cylindrical crystal-melt interface may produce a time-dependent helical deformation of the interface, with a rotation period ranging from several minutes to many hours, depending upon the width of the melt. The temperature distribution is such that the interface is expected to be morphologically stable in the absence of fluid flow. A linear stability analysis reveals that the instability is due to a coupling between a basic hydrodynamic instability in the buoyant flow and the deformable boundary separating the two phases. The crystal-melt interface lowers the critical Grashof number of an analogous rigid-walled system by an order of magnitude for succinonitrile with a Prandtl number P = 22.8; furthermore, the hydrodynamic mode that is actually destabilized by the interface is not the least stable mode in the rigid-walled system for P = 22.8. The results show that the instability may be regarded either as a rather large alteration of a basic hydrodynamic instability by the crystal-melt interface, or as a significant modification of the morphological stability of the interface by the presence of the buoyant flow.

Mcfadden, G. B.↗

Thermoelectric and morphological effects of Peltier pulsing on directional solidification of eutectic Bi-Mn

Extensive in situ thermal measurements using Peltier Interface Demarcation (PID) during directional solidification of eutectic Bi/MnBi were carried out. Observations indicate that significant thermal transients occur throughout the sample as a result of the Peltier pulsing. The contributions of the Peltier, Thomson, and Joule heats were separated and studied as a function of pulse intensity and polarity. The Joule and the combined Peltier and Thomson thermal contributions were determined as a function of time during and after the current pulses, close to the solid/liquid interface. Variations of the Bi/MnBi particle morphology clearly reveal the interface shape, changes in interface velocity, meltback, and temporary loss of cooperative growth, as a result of the pulsing.

Silberstein, R. P.↗

Crystal growing from the melt

The mechanical and electrical properties of crystals produced by a unidirectional process depend strongly on the temperature and flow fields since these control the concentration of solute at the melt-crystal interface. The solute gradient there drives morphological instabilities that lead to cellular or dendritic interfaces. In the presentation several features of flow-solidification interactions will be discussed. These will include the effects of convection driven by density changes and buoyancy and the imposition of forced flow.

Davis, S. H.↗

CdTe and ZnTe metal interface formation and Fermi-level pinning

Interfacial morphology and Fermi-level pinning behavior at the interfaces of Al, Ag, and Pt with UHV-cleaved CdTe and ZnTe are studied using X-ray photoelectron and ultraviolet photoemission spectroscopies. Results are compared to metal/HgCdTe interface formation. For Al/CdTe, a case is found where significantly greater intermixing occurs in CdTe than seen on HgCdTe. The Al/ZnTe interface is also more abrupt than Al/CdTe. Band bending results for interfaces of all three metals with p-CdTe and p-ZnTe are presented and implications for metal/HgZnTe interface formation are considered.

Wahi, A. K.↗

Apollo 17 orange glass - Textural and morphological characteristics of devitrification

Results of a study are presented concerning (1) the significance of nonexcentroradial growth textures in Apollo 17 orange glass and a comparison of these textures with those that develop in lunar and meteoritic chondrules, (2) the development and the nature of the crystalline-glass interface, and (3) the morphology and growth characteristics of olivine and of the opaque mineral oxides that result by devitrification of the orange glass. Observations of the orange glass soil are contrasted with subsequent partial melting of orange glass spherules that were incorporated into mildly metamorphosed breccias, and the quench textures that result in these larger cooling units are compared with the textures produced by supercooling of small particulate spherules. Results show that the expected changes in viscosity due to partial melting and recrystallization do not affect the shape of individual particles, and that neither the thermal gradients that need to be invoked across 20-100 micron spheres nor collision of glass particles during lava fountaining can account for the devitrification textures observed.

Haggerty, S. E.↗

Morphological Stability and Fluid Dynamics of Vapor Crystal Growth

A fundamental understanding of the conditions under which crystals can retain morphological stability, i.e., shape stability of the advancing interface, during growth from vapors was studied. Morphological stability (MS) is a necessary condition for the growth of homogeneous single crystals required for numerous device applications. For crystallization from melts, the MS concepts are well developed and are essentially based on heat and mass transfer conditions about the advancing interface. For crystallization from vapors, the MS requirements are more complex and not well understood. The added complexity arises from the fact that anisotropies in interfacial kinetics are typically stronger in crystallization from vapors than from melts. These pronounced anisotropies root in the distinctly lower atomic roughness of most vapor-solid interfaces.

Rosenberger, F.↗

Convection-induced distortion of a solid-liquid interface

Measurements of convective flow fields and solid-liquid interface shapes during the solidification of a pure and a slightly alloyed transparent material reveal that the convective transport of solute can cause a macroscopic depression to develop in the solid-liquid interface. This effect occurs under conditions close to those which are predicted to produce morphological instability of a planar interface. A cellular or dendritic microstructure later develops within the interface depression. The convection is attributed to the effect of radial temperature gradients in the crystal growth apparatus.

Schaefer, R. J.↗

Numerical Study of Mixing of Two Fluids Under Low Gravity

The mixing characteristics of two fluids inside a cavity due to buoyancy driven flow fields for low gravity conditions is investigated via numerical experiments. The buoyancy driven flow, depending on the parametric region, stretches and deforms the material interface into a wave morphological pattern. The morphological pattern affects the resulting stratification thickness of the mixed region. Three basic mixing regimes occur: convective, diffusive, and chaotic. In the convective regime, an overturning motion occurs which gives rise to a stable wave formation. This wave oscillates and its decay leads to a stable stratification. Whereas, in the diffusive regime, the length of the interface remains constant while mixing occurs. This limiting behavior is very important to materials processing in space, and it admits a closed form solution corresponding to vanishing convective terms which agrees with computational results. Finally, in the chaotic regime, the material interface continuously stretches and folds on itself similar to a horseshoe map. The length of stretch of the interface increases exponentially. Internal wavebreaking occurs for this case. This wavebreaking generates local turbulence, and provides an effective mechanism for mixing.

Duval, Walter M. B.↗

Interaction of flows with the crystal-melt interface

The coupling between a crystal-melt interface and fluid flow is investigated. The solidification boundary conditions at the crystal-melt interface are described. The influences of morphological and double-diffusive instabilities during directional solidification on the interface are studied. The experiments by Glicksman and Mickalonis (1982) and Fang et al. (1985) which examine the relationship between the hydrodynamic state of the phase melt and phase-change interface are analyzed. The Rayleigh-Benard problem, and the effect of crystal-melt interaction on the Rayleigh number are examined. Various applications for melt-flow interactions with solid-liquid interface to engineering and welding are discussed.

Glicksman, M. E.↗

The direct observation of unidirectional solidification as a function of gravity level

A saturated solution of NH4 Cl-H2O was solidified unidirectionally on earth at 1 g and in a suborbital rocket at 0.001 g. In the 1 g experiment, extensive fluid flow was apparent, creating plumes which carry numerous crystallites vertically above the interface in a manner associated with freckling in castings. During growth the interface grew into the liquid at the same rate as the individual dendrites. When solidified in low g, the interface grew at a slower rate than the individual dendrites. No plumes of liquid carrying crystals were seen, but several crystals did appear and grow ahead of the interface. Growth rates, dendrite morphologies and preferred crystallographic orientations are compared for the two experiment conditions. Results indicate that solidification in low gravity produces more uniform dendrite arm spacings, and tends to be controlled by diffusion and crystallographic orientation.

Johnston, M. H.↗

Edge-defined film-fed growth of thin silicon sheets

Finite element analysis was used on two length scales to understand crystal growth of thin silicon sheets. Thermal-capillary models of entire ribbon growth systems were developed. Microscopic modeling of morphological structure of melt/solid interfaces beyond the point of linear instability was carried out. The application to silicon system is discussed.

Ettouney, H. M.↗

Step Bunching: Influence of Impurities and Solution Flow

Step bunching results in striations even at relatively early stages of its development and in inclusions of mother liquor at the later stages. Therefore, eliminating step bunching is crucial for high crystal perfection. At least 5 major effects causing and influencing step bunching are known: (1) Basic morphological instability of stepped interfaces. It is caused by concentration gradient in the solution normal to the face and by the redistribution of solute tangentially to the interface which redistribution enhances occasional perturbations in step density due to various types of noise; (2) Aggravation of the above basic instability by solution flowing tangentially to the face in the same directions as the steps or stabilization of equidistant step train if these flows are antiparallel; (3) Enhanced bunching at supersaturation where step velocity v increases with relative supersaturation s much faster than linear. This v(s) dependence is believed to be associated with impurities. The impurities of which adsorption time is comparable with the time needed to deposit one lattice layer may also be responsible for bunching; (4) Very intensive solution flow stabilizes growing interface even at parallel solution and step flows; (5) Macrosteps were observed to nucleate at crystal corners and edges. Numerical simulation, assuming step-step interactions via surface diffusion also show that step bunching may be induced by random step nucleation at the facet edge and by discontinuity in the step density (a ridge) somewhere in the middle of a face. The corresponding bunching patterns produce the ones observed in experiment. The nature of step bunching generated at the corners and edges and by dislocation step sources, as well as the also relative importance and interrelations between mechanisms 1-5 is not clear, both from experimental and theoretical standpoints. Furthermore, several laws controlling the evolution of existing step bunches have been suggested, though unambiguous conclusions are still missing. Addressing these issues is the major goal of the present project. The theory addressing the above problem, experimental methods, several figures which include: (1) the spatial wave numbers at which the system is neutrally stable as a function of growth velocity for linear kinetics and supersaturation for nonlinear kinetics; (2) a schematic of the experiment of lysozyme crystal growing under conditions of natural convection; (3) fluctuations in time, t, of the normal growth rate, R(t), vicinal slope, p(t) and Fourier Spectra of R(t), discussions and conclusions are presented.

Chernov, A. A.↗

Notes on Interface Growth Kinetics 50 Years After Burton, Cabrera and Frank

This is an overview of basic problems of crystal growth kinetics controlled by processes on the crystal interface with solution and melt. Included, also, are results on fundamental issues concerning morphological stability of crystal-solution interface that engage both interface kinetics and mass transport by diffusion and convection.

Chernov, A. A.↗

Interfacial impurities and the reaction between Si and evaporated Al

As commonly formed, the interface between substrate Si and evaporated Al is laden with impurities. Subsequent heating causes modest dissolution of Si into solid Al, the dissolution morphology being influenced by the interface impurities. In the present experiments, the amount of Si dissolving was considerably enhanced, causing sufficient interface movement to carry most interfaces clear of the original impurities. Under these conditions, the Si/Al interface assumes, during brief heat treatment, a simple shape composed of a few 111 plane-type facets. Such Si/Al interfaces produced in situ should be useful for low-temperature solid-state growth of Si.

Best, J. S.↗

Real Time Characterization of Solid/Liquid Interfaces During Directional Solidification

A X-Ray Transmission Microscope (XTM) has been developed to observe in real time and in-situ solidification phenomenon at the solid/liquid interface. Recent improvements in the horizontal Bridgman furnace design provides real-time magnification (during solidification) up to 12OX. The increased magnification has enabled for the first time the XTM imaging of real-time growth of fibers and particles with diameters of 3-6 micrometers. Further, morphological transitions from planar to cellular interfaces have also been imaged. Results from recent XTM studies on Al-Bi monotectic system, Al-Au eutectic system and interaction of insoluble particles with s/I interfaces in composite materials will be presented. An important parameter during directional solidification of molten metal is the interfacial undercooling. This parameter controls the morphology and composition at the s/I interface. Conventional probes such as thermocouples, due to their large bead size, do not have sufficient resolution for measuring undercooling at the s/I interface. Further, the intrusive nature of the thermocouples also distorts the thermal field at the s/I interface. To overcome these inherent problems we have recently developed a compact furnace which utilizes a non-intrusive technique (Seebeck) to measure undercooling at the S/I interface. Recent interfacial undercooling measurements obtained for the Pb-Sn system will be presented. The Seebeck measurement furnace in the future will be integrated with the XTM to provide the most comprehensive tool for real time characterization of s/I interfaces during solidification.

Sen, S.↗

Break-down of a planar liquid-solid interface during directional solidification - Influence of convection

The influence of convection on the development of morphological instability at the liquid-solid interface during directional solidification in a positive thermal gradient has been examined in Pb-10 wt pct Sn and succinonitrile-1.9 wt pct acetone. The onset of interfacial breakdown occurs at higher growth speeds in the presence of convection. The linear stability analysis due to Favier and Rouzaud which uses the 'deformable' mass flow boundary layer concept shows a good agreement with the experimentally observed behavior.

Tewari, S. N.↗

Fluctuations of thermal conductivity and morphological stability

Compositional fluctuations of the binary alloy result in the corresponding fluctuations of the thermal conductivity of the material. During crystal growth, these fluctuations can significantly modify the local temperature fields at the liquid-solid interface. This, in turn, will affect the morphological stability of the growing interface. In this work, the temperature dependence of the thermal conductivity of the solid phase has been included into the Mullins-Sekerka formalism. A significant effect on the onset of the instability of planar interface has been predicted. It has been found, in particular, that for binary systems with the segregation coefficient above unity a flat interface is always unstable. The shape of the interface fluctuation should have a single harmonic character with a well defined wavelength.

Mazuruk, K.↗

Flight 1 technical report for experiment 74-37 contained polycrystalline solidification in low-G

A .005 M solution of fluorescein in cyclohexanol was directionally solidified in a standard 10 x 10 x 45mm UV silica cuvette, using a bottom thermoelectric chilling device. Progress of the experiment was monitored by time lapse photography. During flight (SPAR I) the camera malfunctioned and only one quarter of the expected data were collected. Comparison of flight and ground specimens indicated that: (1) The dark green layer observed ahead of the solid-liquid interface which is most likely the solute-enriched zone, appears to be wider in the flight specimen; (2) Parasitic nucleation ahead of the solid-liquid interface in the flight sample led to an irregularly shaped interface, smaller grain size, equiaxed grain morphology and a larger average macroscopic growth rate; (3) The formation of equiaxed grains ahead of the solid-liquid interface in the flight specimen may be attributed to ordered islands within the liquid, which survived remelting because of the low degree of superheating (approximately equal to 1.5 C), did not settle because of reduced gravity and acted as nuclei during cooling.

Papaziak, J. M.↗