Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interface tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

CFD simulations of electric motor end ring cooling for improved thermal management

Proper thermal management of an electric motor for vehicle applications extends its operating range. One cooling approach is to impinge Automatic Transmission Fluid (ATF) onto the rotor end ring. Increased ATF coverage correlates to enhanced heat transfer. Computational Fluid Dynamics (CFD) analytical tools provide a mechanism to assess motor thermal management prior to hardware fabrication. The complexity of the fluid flow (e.g., jet atomization, interface tracking, wall impingement) and heat transfer makes these simulations challenging. Computational costs are high when solving these flows on high-speed rotating meshes. Typically, a Volume-of Fluid (VOF) technique (i.e., two-fluid system) is used to resolve ATF dynamics within this rotating framework. Suitable numerical resolution of the relevant physics for thin films under strong inertial forces at high rotor speeds is computationally expensive, further increasing the run times. In this work, a numerical study of rotor-ring cooling by ATF is presented using a patent automated Cartesian cut-cell based method coupled with Automatic Mesh Refinement (AMR). This approach automatically creates the Cartesian mesh on-the-fly and can effectively handle complex rotating geometries by adaptively refining the mesh based on local gradients in the flow field which results in better resolution of the air-ATF interface. A Single non-inertial Reference Frame (SRF) approach is used to account for the rotating geometry and to further improve the overall computational efficiency. Quasi-steady state conditions are targeted in the analysis of the results. Important physics such as ATF jet structure, velocity detail near the air-jet interface, ATF coverage/accumulation on the ring surface, and cooling capacity are presented for a low-resolution Reynolds averaged Navier-Stokes (RANS), high-resolution RANS, and high-resolution Large-Eddy Simulation (LES) models. Computations are scaled over hundreds of cores on a supercomputer to maximize turnaround time. Each numerical approach is shown to capture the general trajectory of the oil jet prior to surface impingement. The high-resolution LES simulation, however, is superior in capturing small scale details and heat transfer between the free jet and surrounding air.

42 ENGINEERING↗

Non-Diffusive Volume Advection with A High Order Interface Reconstruction Method

We show that non-diffusive volume advection in two-dimensions is achieved with several benchmark problems using a newly developed high-order volume of fluids (VOF) interface reconstruction method. (1) A new VOF interface reconstruction method using circular/corner facets (linear facets are a degenerate case of arcs). We create a circular interface facet in each mixed zone by matching neighbor volume with a hybrid Newton’s-bisection method and the local solution is final. In the general case, the new VOF interface reconstruction has 3rd order accuracy and can be easily made seamless. The new method addresses intrinsic issues with Young’s method such as gaps between interface facets in the case of a curved interface, and inability to define curvature nor identify corners. (2) A non-diffusive volume advection scheme. In an ALE advection step, a well-defined interface can be carried over through a Lagrange step and used to compute volume distribution into a relaxed mesh. Then, an interface reconstruction step is performed to redefine the interface in the relaxed mesh. We must point out that the interface carried over is also a solution of interface reconstruction because all the volume fractions in the relaxed mesh are naturally matched. We provide an interface tracking method compatible with our reconstruction scheme, where it is granted to use the prior info as an initial guess to capture sub-mesh resolution features. As a result, we are able to treat multiple facets inside a single mixed cell and obtain highly accurate, non-diffusive solution for advection problems with rather coarse meshes. We show our solutions for two-dimensional incompressible flows with two materials with a) the X + O diagonal translation; b) the Zalesak rotational test; and c) the single vortex spiral test.

97 MATHEMATICS AND COMPUTING↗

A mineral precipitation model based on the volume of fluid method

A novel volume of fluid method is presented for mineral precipitation coupled with fluid flow and reactive transport. The approach describes the fluid-solid interface as a smooth transitional region, which is designed to provide the same precipitation rate and viscous drag force as a sharp interface. Specifically, the governing equation of mineral precipitation is discretized by an upwind scheme, and a rigorous effective viscosity model is derived around the interface. The model is validated against analytical solutions for mineral precipitation in channel and ring-shaped structures. It also compares well with interface tracking simulations of advection-diffusion-reaction problems. Here, the methodology is finally employed to model mineral precipitation in fracture networks, which is challenging due to the low porosity and complex geometry. Compared to other approaches, the proposed model has a concise algorithm and contains no free parameters. In the modeling, only the pore space requires meshing, which improves the computational effciency especially for low-porosity media.

58 GEOSCIENCES↗

Effects of fuel viscosity on the primary breakup dynamics of a high-speed liquid jet with comparison to X-ray radiography

One of the major concerns in combustion engines is the sensitivity of engine performance to fuel prop- erties. Recent works have shown that even slight differences in fuel properties can cause significant changes in performance and emission of an engine. In order to design the combustion engines with multi-fuel flexi- bilities, the precise assessment of fuel sensitivity on liquid jet atomization process is a prerequisite since the resulting fuel/air mixture is critical to the subsequent combustion process. The present study is focusing on the effect of physical fuel properties, mostly viscosity difference, on the breakup process of the liquid jet injected into still air. Two different jet fuels, CAT-A2 and CAT-C3, are considered here as surrogates for a fossil-based fuel and a bio-derived high-viscosity alternative fuel. The simulations are performed using the volume-of-fluid (VoF) interface tracking method coupled to Lagrangian particle method in order to capture the breakup instabilities of jets and the resulting droplets. The investigations take the actual geometry of the injector into account to resolve the unsteady flow phenomena inside the nozzle that impact the turbu- lence transition and atomization. The simulation results are compared to the experimental measurement using X-ray radiography. Both simulation and X-ray measurements consistently describe the effects of different fuels on the fundamental properties of atomization including the breakup length, transverse liquid volume fraction and the droplet sauter-mean-diameter. The application of a Detailed Numerical Simulation approach complemented by unique X-ray diagnostics is novel and providing new understanding and research directions in engine spray dynamics

Breakup instability↗

Pore‐Scale Modeling of Reactive Transport with Coupled Mineral Dissolution and Precipitation

Abstract We present a new pore‐scale model for multicomponent advective‐diffusive transport with coupled mineral dissolution and precipitation. Both dissolution and precipitation are captured simultaneously by introducing a phase transformation vector field representing the direction and magnitude of the overall phase change. An effective viscosity model is adopted in simulating fluid flow during mineral dissolution‐precipitation that can accurately capture the velocity field without introducing any empirical parameters. The proposed approach is validated against analytical solutions and interface tracking simulations in simplified structures. After validation, the proposed approach is employed in modeling realistic rocks where mineral dissolution and precipitation are dominant at different locations. We have identified three regimes for mineral dissolution‐precipitation coupling: (a) compact dissolution‐precipitation where dissolution is dominant near the inlet and precipitation is dominant near the outlet, (b) wormhole dissolution with clustered precipitation where dissolution generates wormholes in the main flow paths and precipitation clogs the secondary flow paths, and (c) dissolution dominant where all solid grains are gradually dissolved. In the three regimes, the proposed approach provides reliable porosity‐permeability relationships that cannot be described well by traditional macroscale models. We find that the permeability can increase while the overall porosity decreases when the main flow paths are expanded by dissolution and adjacent pore spaces are clogged by precipitation.

58 GEOSCIENCES↗

Scale coupling in Richtmyer-Meshkov flows induced by strong shocks

We perform the first systematic study of the nonlinear evolution and scale coupling in Richtmyer-Meshkov (RM) flows induced by strong shocks. The smoothed particle hydrodynamics code (SPHC) is employed to ensure accurate shock capturing, interface tracking and accounting for the dissipation processes. We find that in strong-shock-driven RMI the background motion is supersonic. The amplitude of the initial perturbation strongly influences the flow evolution and the interfacial mixing that can be sub-sonic or supersonic. At late times the flow remains laminar rather than turbulent, and RM bubbles flatten and decelerate. In the fluid bulk, reverse cumulative jets appear and 'hot spots' are formed-local heterogeneous microstructures with temperature substantially higher than that in the ambient. Our numerical simulations agree with the zero-order, linear, weakly nonlinear, and highly nonlinear theoretical analyses as well as with the experiments and suggest that the evolution of RMI is a multi-scale and heterogeneous process with a complicated character of scale coupling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A high-fidelity approach towards simulation of pool boiling

A novel numerical approach is developed to simulate the multiscale problem of pool-boiling phase change. The particular focus is to develop a simulation technique that is capable of predicting the heat transfer and hydrodynamic characteristics of nucleate boiling and the transition to critical heat flux on surfaces of arbitrary shape and roughness distribution addressing a critical need to design enhanced boiling heat transfer surfaces. The macro-scale of the phase change and bubble dynamics is addressed through employing off-the-shelf Computational Fluid Dynamics (CFD) methods for interface tracking and interphase mass and energy transfer. The micro-scale of the microlayer, which forms at early stage of bubble nucleation near the wall, is resolved through asymptotic approximation of the thin-film theory which provides a closed-form solution for the distribution of the micro-layer and its influence on the evaporation process. In addition, the sub-grid surface roughness is represented stochastically through probabilistic density functions and its role in bubble nucleation and growth is then represented based on the thermodynamics of nucleation process. This combination of deterministic CFD, local approximation, and stochastic representation allows the simulation of pool boiling on any surface with known roughness and enhancement characteristics. The numerical model is validated for dynamics and hydrothermal characteristics of a single nucleated bubble on a flat surface against available literature data. In addition, the prediction of pool-boiling heat transfer coefficient is verified against experimental measurements as well as reputable correlations for various roughness distributions and different surface orientations. Finally, the model is employed to demonstrate pool-boiling phenomenon on enhanced structures with reentrance cavities and to explore the effect of enhancement feature design on thermal and hydrodynamic characteristics of these surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatially Resolved Recombination Analysis of CuIn $_\text{x}$ Ga $_\text{1-x}$ Se $_{2}$ Absorbers With Alkali Postdeposition Treatments

In this contribution, we probe spatial variations in charge-carrier recombination in CuIn x Ga 1-x Se 2 (CIGS) absorbers grown on soda-lime glass (SLG) and alkali-free sapphire substrates with NaF and KF postdeposition treatments (PDTs). Temperature-and illumination-dependent device measurements are used to track interface recombination and recombination in the quasi-neutral region. The analysis of these data reveals that the benefit of alkali PDTs depends on the substrate: interface recombination is reduced in devices grown on sapphire substrates, whereas recombination in the quasi-neutral regions is reduced in devices grown on SLG substrates. Cathodoluminescence (CL) spectrum imaging is used to study the spatial distribution of recombination with respect to the grain structure. The grain-boundary CL contrast is similar in films with no PDT, NaF PDT, or KF PDT. A reduced grain-boundary contrast is observed with a NaF + KF PDT; however, suggesting a reduced recombination strength at the grain boundaries (GBs) for combined NaF + KF treatment. CL spectra indicate band tailing, consistent with the fluctuating potential model. Fluctuating potentials are believed to reduce open-circuit voltage, but their spatial distribution has not been studied. Here, CL spectrum imaging data are used to generate maps of the root-mean-square value of the potential energy fluctuations-γ. These maps reveal a bimodal ..gamma.. distribution for all samples: ..gamma.. is generally in the range ~15-50 meV or ~100-180 meV. The higher ..gamma.. range is more significantly affected by the PDTs; after the PDTs, it is strongly correlated with GBs. The lower ..gamma.. range is correlated with higher emission intensity regions, typically grain interiors, and increases in area fraction after the PDTs. These results demonstrate how spatially resolved luminescence and device characterization measurements can be used to monitor changes in recombination in CIGS films and photovoltaic devices. Such measurements can complement empirical device optimization and help improve device performance.

14 SOLAR ENERGY↗

Influence of Bubbles on the Turbulence Anisotropy

Direct numerical simulation (DNS) with interface tracking of turbulent bubbly flows is becoming a major tool in advancing our knowledge in the area of multiphase modeling research. A comprehensive analysis of the turbulent flow structure allows us to evaluate the state-of-the-art computational multiphase fluid dynamics (CMFD) models and to propose new closure laws. The presented research will demonstrate how the multiphase DNS data can inform the development of computational fluid dynamics (CFD) models. In particular, the Reynolds stress distribution will be evaluated for single- and two-phase bubbly flows and the level of turbulence anisotropy will be measured in several scenarios. The results will help determine if the isotropic turbulent models are suitable for bubbly flow applications or if there is a strong need to apply and develop Reynolds-stress turbulent models for two-phase flow CFD modeling.

Engineering↗

picassodev/picasso

Picasso is a C++ template library for the development of exascale-class particle-in-cell methods. It contains data structures for particle and grid management using the ECP Kokkos and Cabana libraries, abstractions for particle and grid discretizations, and tools for interface tracking and reconstruction with particles.

Slattery, Stuart↗

Los Alamos National Laboratory Computational Physics Summer Student Workshop (Final Report)

The numerical solution of highly compressible, multi-material flows is an ongoing research area. These types of flows can be solved with a Lagrangian type mesh which moves with the material in a simulation to allow precise material interface tracking. Currently, researchers at Los Alamos National Laboratory and elsewhere are investigating cell-centered Lagrangian algorithms with the aim of producing methods that have second-order accuracy, preserve symmetry, and do not generate spurious vorticity. The new cell-centered algorithms solve a Riemann-like problem at the vertex of a cell. Professor Phil Roe at the University of Michigan has proposed a new structure for Lagrangian hydrodynamic algorithms that does not rely on the solution of the Riemann problem. The new approach utilizes Flux Corrected Transport (FCT) and it implements a form of vorticity control. The first step in the development of this method has been to construct an algorithm that solves the acoustic equations on an Eulerian mesh. The algorithm, which builds on the work of Morton and Roe, calculates fluxes at cell vertices, attains second-order accuracy using FCT, and has the special property of preserving vorticity. Results are presented that confirm the second order accuracy of the scheme and the vorticity preserving properties. The results are compared to the output produced by a MUSCL-Hancock algorithm. Some discussion of limiting methods for the FCT algorithm is also given.

42 ENGINEERING↗

Investigation and modeling of space shuttle main engine shutdown transient chugging

The space shuttle main engines experience a low frequency pressure pulsation in both the fuel and oxidizer preburners during the shutdown transient. This pressure pulsation, called chugging, has been linked to undesirable bearing loads and possible damage to the spark ignitor supply piping for the fuel preburner. The problem is briefly described and a model is proposed that includes: (1) a transient stirred tank reactor model for the combustion chamber, (2) a resistance capacitance model for the supply piping and (3) purge gas/liquid oxygen interface tracking.

George, P. E., II↗

Thermocapillary motion of deformable drops

The thermocapillary motion of initially spherical drops/bubbles driven by a constant temperature gradient in an unbounded liquid medium is simulated numerically. Effects of convection of momentum and energy, as well as shape deformations, are addressed. The method used is based on interface tracking on a base cartesian grid, and uses a smeared color or indicator function for the determination of the surface topology. Quad-tree adaptive refinement of the cartesian grid is implemented to enhance the fidelity of the surface tracking. It is shown that convection of energy results in a slowing of the drop, as the isotherms get wrapped around the front of the drop. Shape deformation resulting from inertial effects affect the migration velocity. The physical results obtained are in agreement with the existing literature. Furthermore, remarks are made on the sensitivity of the calculated solutions to the smearing of the fluid properties. Analysis and simulations show that the migration velocity depends very strongly on the smearing of the interfacial force whereas it is rather insensitive to the smearing of other properties, hence the adaptive grid.

Haj-Hariri, Hossein↗

Lattice Boltzmann Method for Spacecraft Propellant Slosh Simulation

A scalable computational approach to the simulation of propellant tank sloshing dynamics in microgravity is presented. In this work, we use the lattice Boltzmann equation (LBE) to approximate the behavior of two-phase, single-component isothermal flows at very low Bond numbers. Through the use of a non-ideal gas equation of state and a modified multiple relaxation time (MRT) collision operator, the proposed method can simulate thermodynamically consistent phase transitions at temperatures and density ratios consistent with typical spacecraft cryogenic propellants, for example, liquid oxygen. Determination of the tank forces and moments relies upon the global momentum conservation of the fluid domain, and a parametric wall wetting model allows tuning of the free surface contact angle. Development of the interface is implicit and no interface tracking approach is required. Numerical examples illustrate the method's application to predicting bulk fluid motion including lateral propellant slosh in low-g conditions.

Orr, Jeb S.↗

Lattice Boltzmann Method for Spacecraft Propellant Slosh Simulation

A scalable computational approach to the simulation of propellant tank sloshing dynamics in microgravity is presented. In this work, we use the lattice Boltzmann equation (LBE) to approximate the behavior of two-phase, single-component isothermal flows at very low Bond numbers. Through the use of a non-ideal gas equation of state and a modified multiple relaxation time (MRT) collision operator, the proposed method can simulate thermodynamically consistent phase transitions at temperatures and density ratios consistent with typical spacecraft cryogenic propellants, for example, liquid oxygen. Determination of the tank forces and moments is based upon a novel approach that relies on the global momentum conservation of the closed fluid domain, and a parametric wall wetting model allows tuning of the free surface contact angle. Development of the interface is implicit and no interface tracking approach is required. A numerical example illustrates the method's application to prediction of bulk fluid behavior during a spacecraft ullage settling maneuver.

Orr, Jeb S.↗

Axisymmetric boundary integral formulation for a two fluid system

A 3D axisymmetric Galerkin boundary integral formulation for modeling the motion of one inviscid fluid enclosed inside another is described. The interface variables are the velocity potential and the normal velocity, and they can be solved for separately, the second linear system being symmetric. The algorithm is validated by comparing with the analytic solutions for a static interior spherical drop, over a range of values for the relative densities D=rho_E/rho_I of exterior and interior fluids, and various boundary conditions. For time dependent simulations utilizing a Level Set method for the interface tracking, the accuracy has been checked by comparing against the known oscillation frequency of the sphere. Pinch-off profiles corresponding to an initial two lobe geometry drop and D=6 are also presented.

42 ENGINEERING↗

Two-phase Flow Regime Transition Study using Level-Set Method

In Boiling Water Reactors (BWRs) the coolant exiting the core often has void fractions as high as 50%, resulting in high gas volume fraction two-phase flow regimes, such as annular or churn-turbulent flow. As the coolant boils along the subchannels it will experience flow regime transitions from bubbly to slug, slug to churn, and, finally, churn to annular. While these transition points are known to occur as a higher void develops along the flow path, the driving physics of the transition phenomenon is not well understood. Currently, experiment based correlations are the most reliable method for predicting where in the core the flow regime transitions will occur. However, experimentally, it's ever difficult to observe the details of the two-phase flow at prototypical pressures/temperatures, or, as with high fidelity experiments, the conditions differ from those in a reactor. Being able to predict these flow regime transitions is critical to safe and efficient reactor operations as well as maintaining fuel rod integrity by avoiding dryout. The characterization of flow regimes has been extensively studied, producing a wide set of flow regime maps based on characteristic parameters such as vapor and liquid superficial velocity, time dependent pressure drop, interfacial area density, etc. While these studies are useful in predicting the flow regime for certain geometry and flow conditions, they do not provide a universal predictive capability for any geometry under any conditions. Additionally, it is difficult to achieve reactor realistic pressure and temperature conditions in experiments. Direct Numerical Simulation (DNS) coupled with Interface Tracking Methods (ITMs) becomes advantageous in this case because the simulations are not limited by the material properties or to the real world conditions. DNS allows for analysis of flows that would be impossible to achieve, or observe in detail, experimentally. The finite element based DNS code, PHASTA (parallel, hierarchic, higher-order accurate, adaptive, stabilized transient analysis flow solver), used in this work utilizes the level set ITM and has been previously shown to properly resolve bubbly, slug, and annular flows, but not transitions between the two-phase flow regimes. The present work uses PHASTA to analyze flow in a pipe for various void fractions and superficial velocities. Flow regime transitions were induced to demonstrate the transient behavior of this phenomenon. With the unique advanced analysis capabilities developed in PHASTA that allow for individual bubble tracking, it becomes possible to extract new localized information about the flow behavior that is currently not attainable from experiments. The potential of this capability is to uncover the underlying physics of the flow regime transition phenomenon. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗