Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interlayer cation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

71 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spin Waves in Dirac Semimetal Ca 0.6⁢ Sr 0.4⁢ MnSb 2 Investigated with Neutrons by the Diffraction Method

The tunability of Dirac semimetals with antiferromagnetic Mn layers is of great interest. The observed sign change of interlayer magnetic coupling between CaMnBi 2 and SrMnBi 2 suggests ionic substitution as a potential tuning mechanism. If so, novel behavior near the compensation point could be expected. Here, to explore this, we study a mixed-cation analog, Ca 0.6⁢ Sr 0.4⁢ MnSb 2 , where Bi is replaced by Sb. Conventional inelastic neutron scattering is impractical due to the small crystal size (m ≈ 0.28 g) available for compositional studies; however, we find that using a neutron diffractometer with a wide-angle area detector we can obtain a good quality spin-wave signal, which is shaped by energy-momentum conservation and retains spectroscopic information even without direct energy analysis. Spin-wave modeling reveals an interlayer coupling quantitatively similar to SrMnSb 2 , indicating it is not directly tuned by ionic size and that the sign change in Bi-based compounds likely arises from the observed change in lattice symmetry. Beyond this key insight, our results present an efficient method for parametric and compositional studies of spin dynamics in small crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Unleashing the Potential of Fast Charging Batteries: Leveraging Anion Redox Chemistry in Ni- and Co-Free Cathodes

Designing Li-ion battery cathodes free from critical raw materials such as Co and Ni has a huge technological and societal impact. Though anion redox-based Li-rich oxide cathodes allow designing Co and Ni free cathode compositions, the Li-rich oxides witnessed voltage fade, voltage hysteresis, and irreversible oxygen release despite their high capacity. Conversely, anion redox through highly covalent chalcogenides (S/Se) is emerging due to the improved covalency between metal d and ligand p bands. Here, we investigate the tuning of multi-chalcogen (S/Se) p-band and redox-active metal d-band in a model Li-rich chalcogen composition Li 1.13 Ti 0.57 Fe 0.3 S 2-y Se y (y = 0 - 1) through in-depth electrochemical, X-ray spectroscopy, and DFT-based electronic structure investigations. Introducing the appropriate amount of Se p band character in anion redox sulfides increases interlayer distance and metal - ligand covalency without modifying the original crystal structure, promoting significant electrochemical reversibility through mixed anionic (Se 2- /Se n- , S 2- /S n- , wherein n<2) and cationic (Fe 2+ /Fe 3+ ) redox reactions. Here we show the detailed Fe, S, and Se redox contributions during Li insertion/extraction through X-ray Absorption (XAS) and Hard X-ray Photoemission Spectroscopy (HAXPES) measurements. The orbital tuning approach improves rate capability for more than 10 C charge-discharge rate, exhibiting more than 50% of its original capacity obtained at C/20 rate. The buffer cation in the lattice (Ti 4+ ) remains electrochemically inactive even after significant Se p-band introduction in the sulfide framework. Overall, this work takes advantage of multi-anion redox chemistry to uncover practically demanding fast charging-discharging characteristics in intercalation cathodes. The obtained knowledge of this design can be extended to other oxide and chalcogen cathodes for high performance Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Pillared Laminar Vermiculite Membranes with Tunable Monovalent and Multivalent Ion Selectivity

Effective membrane separation of Li + from Na + and Mg 2+ is crucial for lithium extraction from water yet challenging for conventional polymeric membranes. Two dimensional (2D) membranes with ordered laminar structures and tunable physicochemical properties offer distinctive ion-sieving capabilities promising for lithium extraction. Recently, phyllosilicates are introduced as abundant and cost-effective source materials for such membranes. However, their water instability and low inherent ion transport selectivity hinder practical applications. Herein, a new class of laminar membranes with excellent stability and tunable ion sieving is reported by incorporating inorganic alumina pillars into vermiculite interlayers. Crosslinking vermiculite flakes with alumina pillars significantly strengthens interlamellar interactions, resulting in robust water stability. Doping of Na + before the pillaring process reverses the membrane's surface charge, substantially boosting Li + separation from multivalent cations via electrostatic interactions. Lithium extraction is often complicated by the presence of co-existing monovalent cations (e.g., Na + ) at higher concentrations. Here, by introducing excess Na + into the membrane after the pillaring process, the separation of Li + from monovalent cations is enhanced through steric effects. This work realizes both monovalent/multivalent and monovalent/monovalent selective ion sieving with the same membrane platform. A separation mechanism is proposed based on Donnan exclusion and size exclusion, providing new insights for membrane design for resource recovery applications.

2D materials↗
DOE OSTI2022

Polytypism in semi-disordered lizardite and amesite by low-dose HAADF-STEM

Serpentine minerals exert important controls on the physical properties of ultramafic rocks and have the potential to influence deformation phenomena in fault zones and to control the release of water in subducted slabs. Sheet serpentine generally, and lizardite and amesite specifically, can adopt alternative crystallographic stacking arrangements called polytypes. Polytypism has been extensively studied in fully ordered crystals, but it remains largely enigmatic in the more common semi-disordered crystals that in long-range analyses such as X-ray diffraction only exhibit random combinations of 0b and ±1/3b interlayer shifts. To date, atomic-resolution imaging to identify locally ordered polytypes has been precluded by the beam-sensitive nature of this hydrous magnesium silicate mineral. Here, in this study, we employed low-dose high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to study the polytypic structure of semi-disordered lizardite and amesite. Because the electron dose was as low as ~6000 e–/Å 2 , it was possible to directly resolve oxygen atomic columns and all the cations with a resolution of ~1 Å and reveal the short-range order. For lizardite, we identified long-period non-standard polytypes, including examples with 3, 4, 8, and 9 layers stemming from the ordering of the octahedral tilt along the a-axis. For amesite, we found short-range ordered polytypes with periodicities of up to 42 Å stemming from the ordering of interlayer shifts along the b-axis. The resolution was sufficient to determine the relative abundance of 6R 2 , 6R 1 , 2H 1 , and 2H 2 polytypes in amesite to be 46.1, 29.6, 7.7, and 1.9%, respectively. This is contrary to the expectation that the most common form of amesite is the 2H 2 polytype, which may be more likely to form macroscopic crystals suitable for conventional X-ray diffraction-based studies. We conclude that HAADF-STEM methods open the way for the characterization of beam-sensitive minerals and to resolve the structural details of less well-ordered (but possibly more abundant) minerals at a unit-cell scale.

58 GEOSCIENCES↗
DOE OSTI2021

Effective cation exchange capacity of calcium silicate hydrates (C-S-H)

The binding of alkalis and calcium to calcium silicate hydrate (C-S-H) can be measured by cation exchange using cobalt hexamine solution with adapted pH. The effective cation exchange capacity (CEC) decreased at higher Ca/Si in C-S-H. A maximum of charge{sub exch}/Si of 0.08–0.10 was measured at Ca/Si = 0.8 decreasing to 0.01–0.02 at Ca/Si = 1.6. At high Ca/Si, only a minor fraction of Ca was present at exchangeable sites, while most of the Ca{sup 2+} present in interlayer or surface was specifically bound and thus not exchangeable. In contrast, sodium was present only at exchangeable sites in the C-S-H, more at low than at high Ca/Si. An increase of pH in the presence of 100 mmol/L NaOH increased the effective CEC of C-S-H by 5–10% indicating a limited influence of pH on the deprotonation of the silanol groups.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Photoabsorption and Stability in Triple-Cation Perovskites Influenced by Interfacial Engineering of the Collector

Charge carrier dynamics in three-dimensional (3D) perovskites is critical to understand for enhancing device performance since the photoabsorption mechanism in perovskites influences key functional devices such as photodetectors and solar cells. Temperature-dependent optoelectronic transport measurements were conducted on our triple cation formulation for the first time from 4 K to 300 K to investigate the role of an interfacial Ti underlayer, beneath the conventional Au collector electrode. The photocurrent was 10X larger with the use of a Ti interfacial layer compared to only Au, where device measurements were made using a broadband white light source at room temperature. As temperature increased from 4 K, the photocurrent increased in both cases, consistent with the semiconducting nature of the triple-cation absorber. Besides computing the responsivity as a function of power and temperature, time-domain measurements with ON/OFF pulses of incident white light, showed the switching time constants to be in the tens to few hundred milliseconds range, and largely temperature-invariant for the two contacts examined. Finally, we constructed solar cells with the same triple cation absorber, in an n-i-p architecture with a Spiro-OMeTAD hole transport layer, but the collector was composed of both types of contacts. Exposing our devices to moisture-rich conditions of up to 70% relative humidity showed the Au/Ti contacted devices to be more robust. Here, our experimental results demonstrate that the addition of a Ti interlayer improves collector efficiency through the photoabsorption process while also potentially stabilizing the solar cells, compared to the bare Au, in moisture-rich environments

optoelectronics↗
DOE OSTI2022

Metal (hydr)oxide surface precipitates and their effects on potassium sorption

Surface precipitation has been shown to occur on rapid time scales in clay and metal oxide mineral systems. The formation of surface precipitates is hypothesized to present new potential sorption sites for potassium (K), where K can become incorporated into newly formed interlayer spaces (e.g., between tetrahedral–octahedral–tetrahedral stacked sheets). The objective of this study is to determine the effects of newly formed mineral surface precipitates on K sorption. Potassium adsorption experiments were conducted by utilizing Al 2 O 3 and SiO 2 sorbents in the presence of various cations (magnesium, zinc, and nickel) that helped to catalyze the formation of surface precipitates. Dissolved concentrations of elements were monitored via inductively coupled plasma optical emission spectrometry (ICP-OES). Solids were characterized via X-ray diffraction (XRD), and K surface complexation was analyzed via X-ray absorption near edge structure (XANES) spectroscopy. X-ray diffraction analysis indicated bayerite, layered double hydroxides (LDH), and silicated LDH were formed as reaction products, thus creating new surface sites for potential K adsorption. The presence of Si increased K adsorption perhaps due to its role in the formation of LDH surface precipitates. When the differences between observed and theoretical surface area normalized K sorption densities were averaged, a 31% increase in K adsorption was observed in the presence of Si. XANES analysis indicated that the binding mechanism of K to Si is different than that of K to Al, perhaps due to the presence of inner-sphere complexation of K to Al-oxide. Samples reacted for one month versus one week yielded more intense XANES post-edge peaks which indicated that the K sorption complex changes over time. Altogether, our findings provide novel insights into the mechanisms of K fixation in soil and has high implication in providing improved K fertilizer recommendation to growers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structure and Dynamics of Aqueous Electrolytes Confined in 2D-TiO 2 /Ti 3 C 2 T 2 MXene Heterostructures

The synthesis of heterostructures of different two-dimensional (2D) materials offers an approach to combine advantages of different materials constituting the heterostructure and ultimately enhance their performance for applications such as electrochemical energy storage, achieving high energy, and high-power densities. Understanding the behavior of ions and solvents in confinement between these dissimilar layers is critical to understand their performance and control. Considering aqueous electrolytes, we explore the heterostructure of 2D lepidocrocite-type TiO 2 (2D-TiO 2 ) and hydroxylated or O-terminated Ti 3 C 2 MXene using ReaxFF molecular dynamics simulations and elastic/quasielastic neutron scattering techniques. Simulating a bilayer water intercalation, we find that the extent of interlayer hydration is impacted most by the surface terminations on the MXene and is marginally affected by 2D-TiO 2 . However, the introduction of 2D-TiO 2 decreases the water self-diffusion due to the notch sites (i.e., surface oxygen ridges) entrapping water molecules. Intercalating alkali cations into the heterostructures, we find that Li + is predominantly adsorbed at the 2D-TiO 2 surface instead of the MXenes with the preferential occupation of the notch sites. In contrast, Na+ forms a planar solvation with water, while K + is adsorbed both at the O-terminated MXene and 2D-TiO 2 . This behavior is altered when OH-terminated MXene is involved—the repulsion from the protons on the MXene surface forces the K + ions to be adsorbed exclusively to 2D-TiO 2 , while Na + retains some of its solvation in the water layer due to its smaller size. In OH-terminated MXenes, we see a consistent transfer of protons from the MXene surface toward 2D-TiO 2 , implying a greater capacity to store protons in the heterostructures. Of the three cations simulated, Na + hinders the proton migration the least and Li + the most because of its position near the 2D-TiO 2 surface. Furthermore, 2D-TiO 2 /MXene heterostructures are likely to exhibit a higher energy density but lower power density, especially with Na + intercalation.

25 ENERGY STORAGE↗
DOE OSTI2026

Constraining the Hydration of Clay Minerals and Abundances of Amorphous Phases in Gale Crater, Mars

Both water and organic matter are required for the development and persistence of life. Phyllosilicates (clay minerals) have high surface areas that easily sorb water and organic matter. The Curiosity rover has investigated several hundred meters of stratigraphy in Gale crater, including where clays were detected from orbit. Previous results have suggested that subsurface hydration is greatest in units with the most abundant clays, suggesting that these minerals may be hydrated. Organics have also been found throughout Gale crater. Smectites are the most common and abundant phyllosilicates in Gale crater samples and can expand and sorb water and organics in interlayer sites. The most common organic sorption processes on Earth typically involve water or hydroxyl, so hydrated phyllosilicates are good candidates for organic preservation. Using newly derived subsurface hydration results with previously published mineralogy and geochemistry, we derived modeled constraints on the abundances of hydrated amorphous phases, “excess” water, and “excess” cations. These “excess” phases are not accounted for by published crystalline phase abundances or by amorphous phases constrained here. We found correlations between smectites and both “excess” water and “excess” cation abundances, indicating that smectites in Gale crater are hydrated and that cation bridging could be a mechanism for sorption of organics. Our results also show the persistence of amorphous sulfates, opal-A, and volcanic or impact glass, which indicate low water-rock interactions. Increased abundances of sulfates and glass in stratigraphically higher samples may indicate lower water availability and environmental aridification during the time these units were being deposited.

58 GEOSCIENCES↗
DOE OSTI2026

Synthesis and Characterization of Layered Actinide (U, Np, Pu) Oxide and Hydroxide Phases

Systematic structural comparisons across the early actinides remain limited by the scarcity of well-defined transuranic layered oxide and oxyhydroxide phases. Here, we report the synthesis and single-crystal characterization of new layered actinide compounds spanning U, Np, and Pu obtained under mild hydrothermal conditions in concentrated alkali hydroxide media. These include hydrated oxides α-Cs 2 U 2 O 7 •0.5H 2 O and Rb 2 An 2 O 7 •0.5H 2 O (An = Np, Pu), oxy-hydroxides Rb 6 [(AnO 2 ) 6 O 8 (OH) 2 ]•xH 2 O x = 0, 0.5 (An = U, Np) and Rb 4 [(UO 2 ) 5 O 6 (OH) 2 ]•2H 2 O, as well as nitrate-intercalated compounds Cs 6 [(AnO 2 ) 3 O 4 (OH) 2 ](NO 3 ) 2 (An = Np, Pu). Single-crystal X-ray diffraction studies reveal extended two-dimensional architectures constructed from edge- and vertex-sharing actinyl polyhedra, with systematic evolution in equatorial coordination, hydration, and anionic sheet topology across the U–Np–Pu series. Incorporation of nitrate anions within the interlayer region of Cs 6 [(AnO 2 ) 3 O 4 (OH) 2 ](NO 3 ) 2 establishes a previously unobserved structural motif in layered transuranic oxyhydroxides, demonstrating an additional pathway for anion-mediated framework stabilization. Correlation of crystallographic metrics with single-crystal Raman spectroscopy provides new vibrational benchmarks linking differences in An═O yl bond lengths to the equatorial coordination and the interstitial cations. These findings expand the structural hierarchy of layered actinide materials and address clarifying periodic trends governing topology, bonding, and vibrational signatures in high-valent 5ƒ oxide systems.

actinides↗
DOE OSTI2021

Long-Term Structural and Chemical Stability of Carbon Electrodes in Vanadium Redox Flow Battery

Predicting the performance decay in carbon electrodes is critical to maximizing the longevity of redox flow battery (RFB) systems. This study investigates the effect of long-term cycling (over 8000 cycles) on the structural and chemical evolution of carbon electrodes. We find that the microstructural aspects such as graphitic stacking order and interlayer spacing along with overall morphological construct remains largely unchanged even after the prolonged cycling process. Conversely, significant changes in surface chemistry such as evolution of functional groups and point defects are evident from our combined multimodal spectroscopic and computational analysis. The XPS and FTIR analysis reveals chemical absorption of chloride counter anions at point defects within graphitic surface. Additionally, our results suggest that vanadium cation plays an important role in counter anion-carbon surface interaction and subsequently the surface chemistry evolutions. Our findings provide insights about surface chemical evolution that is critical for predicting electrode performance and longevity of RFB.

Modachur Sivakumar, Bhuvaneswari↗
DOE OSTI2022

Modifying Interface Solvation and Oxygen Reduction Electrocatalysis with Hydrophobic Species

Ionic liquid interlayers improve the oxygen reduction reaction (ORR) kinetics on bulk and nanostructured catalysts for both Pt and alloyed-Pt materials. Despite the demonstrated performance enhancement at the half-cell and membrane electrode assembly level, the mechanism of the improvement is not fully understood. In this work, we combine single-crystal experiments with microkinetic modeling to uncover the origin of the ORR kinetic improvement on Pt(111) in the presence of ionic liquids and hydrophobic cations. With the incorporation of a modified Frumkin isotherm, our model accurately simulates the disorder–order transition observed in hydroxyl and bisulfate adsorption on Pt(111) under acidic conditions. Voltametric analysis shows that ionic liquids impact solvation to break so-called scaling relations between the adsorption strength of OH ad and O ad , but these effects have little impact on ORR activity. Instead, destabilized OH ad reduces the overall hydroxyl (spectator) coverage, resulting in higher availability of active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Diversity-oriented synthesis of polymer membranes with ion solvation cages

Microporous polymers feature shape-persistent free volume elements (FVEs), which are permeated by small molecules and ions when used as membranes for chemical separations, water purification, fuel cells, and batteries. It remains a significant challenge to identify FVEs with analyte specificity, due to difficulties in generating microporous polymer libraries with sufficient diversity for screening their properties. Here, we describe a diversity-oriented synthetic (DOS) strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions (Li + ). Furthermore, key elements of our strategy included diversification of bis(catechol)-type monomers via multi-component Mannich reactions to introduce Li+-coordinating functionality within individual FVEs, topology-enforcing polymerizations for generating macromolecular skeletal diversity for networking FVEs into different pore architectures, and several classes of on-polymer reactions for diversifying pore geometries and dielectric properties. Lead candidate polymer membranes featuring explicit ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome.4 These advantages are tied to enhanced Li + partitioning from the electrolyte when the cages are present, higher diffusion barriers for anions within the pores, and network-enforced restrictions on the number of solvent molecules bound to Li+ by comparison to the bulk electrolyte, which reduces the effective mass of the working ion. Such membranes show promise as anode-stabilizing interlayers in high-voltage lithium-metal batteries for electric mobility.

42 ENGINEERING↗
DOE OSTI2021

Nanoparticle Assembly Induced Ligand Interactions for Enhanced Electrocatalytic CO 2 Conversion

The microenvironment in which the catalysts are situated is as important as the active sites in determining the overall catalytic performance. Recently, it has been found that nanoparticle (NP) surface ligands can actively participate in creating a favorable catalytic microenvironment, as part of the nanoparticle/ordered-ligand interlayer (NOLI), for selective CO 2 conversion. However, much of the ligand–ligand interactions presumed essential to the formation of such a catalytic interlayer remains to be understood. In this study, by varying the initial size of NPs and utilizing spectroscopic and electrochemical techniques, we show that the assembly of NPs leads to the necessary ligand interactions for the NOLI formation. The large surface curvature of small NPs promotes strong noncovalent interactions between ligands of adjacent NPs through ligand interdigitation. This ensures their collective behavior in electrochemical conditions and gives rise to the structurally ordered ligand layer of the NOLI. Thus, the use of smaller NPs was shown to result in a greater catalytically effective NOLI area associated with desolvated cations and electrostatic stabilization of intermediates, leading to the enhancement of intrinsic CO 2 -to-CO turnover. Our findings highlight the potential use of tailored microenvironments for NP catalysis by controlling its surface ligand interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Exfoliation of surfactant swollen layered MWW zeolites into two-dimensional zeolite nanosheets using telechelic liquid polybutadiene

We report two-dimensional (2D) zeolites have the potential to enhance mass transport by reducing diffusion lengths and thus find applications in catalysis and separation. High aspect ratio 2D zeolite nanosheets are required for fabrication of thin, high-flux zeolite membranes. Preparation of 2D zeolite nanosheets can be achieved by exfoliation of layered zeolite precursors, which usually requires multiple steps including swelling with cationic surfactants, exfoliation by applying a mechanical force such as shearing or sonication, purification and removal of the surfactants. The exfoliation of surfactant swollen layered zeolite precursors has been studied using molten polystyrene and telechelic liquid polybutadiene, but still requires extensive shearing force. Recently, a novel one-step exfoliation method has been developed for nonswollen MWW zeolite precursors using tetrabutylammonium hydroxide (TBAOH) solution. In this work, we study the exfoliation of surfactant swollen MWW layered precursors (with and without aluminum) in commercially available liquid hydroxyl-terminated polybutadiene (HTPB) with the aim to provide fundamental understanding of the interaction between the liquid polybutadiene and the surfactant swollen layered zeolite precursors. It was found that surfactant swollen ITQ-1, (ITQ-1(S)), a pure silica layered precursor with MWW framework after being swollen with a cationic surfactant, can be exfoliated in liquid HTPB at room temperature without applying any additional shearing force. The aluminum containing surfactant swollen MWW precursors can be also exfoliated in HTPB at room temperature, but require additional shearing forces. The exfoliation process was monitored using rheology experiments and studied by tuning the composition of the zeolite precursors. The interaction between the layered zeolite precursor and the hydroxyl group of the liquid polybutadiene allows the polymer to intercalate the precursor and exfoliate it into nanosheets. The presence of framework aluminum and the nature of the organic structure directing agents (OSDAs) are key parameters affecting the exfoliation process. Framework Al is unfavorable for the exfoliation possibly due to the surface charges introduced by the aluminum. Bulky OSDA, trimethyladamantammonium (TMAda + ), in the interlayer spacing may facilitate the exfoliation.

2D nanosheets↗
DOE OSTI2021

Radiation-Induced Solid-State Transformations of Uranyl Peroxides

Single-crystal X-ray diffraction studies of pristine and γ-irradiated Ca 2 [UO 2 (O 2 ) 3 ]·9H 2 O reveal site-specific atomic-scale changes during the solid-state progression from a crystalline to X-ray amorphous state with increasing dose. Following γ-irradiation to 1, 1.5, and 2 MGy, the peroxide group not bonded to Ca 2+ is progressively replaced by two hydroxyl groups separated by 2.7 Å (with minor changes in the unit cell), whereas the peroxide groups bonded to Ca 2+ cations are largely unaffected by irradiation prior to amorphization, which occurs by a dose of 3 MGy. The conversion of peroxide to hydroxyl occurs through interaction of neighboring lattice H 2 O molecules and ionization of the peroxide O–O bond, which produces two hydroxyls, and allows isolation of the important monomer building block, UO 2 (O 2 ) 2 (OH) 2 4– , that is ubiquitous in uranyl capsule polyoxometalates. Steric crowding in the equatorial plane of the uranyl ion develops and promotes transformation to an amorphous phase. In contrast, γ-irradiation of solid Li 4 [(UO 2 )(O 2 ) 3 ]·10H 2 O results in a solid-state transformation to a well-crystallized peroxide-free uranyl oxyhydrate containing sheets of equatorial edge and vertex-sharing uranyl pentagonal bipyramids with likely Li and H 2 O in interlayer positions. The irradiation products of these two uranyl triperoxide monomers are compared via X-ray diffraction (single-crystal and powder) and Raman spectroscopy, with a focus on the influence of the Li + and Ca 2+ countercations. Highly hydratable and mobile Li+ yields to uranyl hydrolysis reactions, while Ca 2+ provides lattice rigidity, allowing observation of the first steps of radiation-promoted transformation of uranyl triperoxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Functional properties of Yttrium Iron Garnett thin films on graphene-coated Gd 3 Ga 5 O 12 for remote epitaxial transfer

Remote epitaxial growth via a graphene interlayer and subsequent mechanical exfoliation of a free-standing membrane is a recently developed technique used to transfer complex oxide thin films onto non-native substrates to form heterogeneously integrated structures for various device applications. One such oxide is Yttrium Iron Garnet (YIG), a material of choice for a wide range of magnetoelectric and spintronic devices owing to its strong magnetic properties and low microwave losses. YIG is predominantly grown on lattice matched Gadolinium Gallium Garnet (GGG) substrates, but by utilizing the remote epitaxy technique, high quality YIG films can be transferred from GGG onto another substrate such as piezoelectric Lithium Niobate (LN). Mechanical strain coupling between the layers and magnetostrictive nature of YIG would allow for the investigation of the interplay in YIG/LN structures leading to the design of novel frequency agile magneto-acoustic devices. In this study functional properties of a YIG film grown using PLD on graphene-coated GGG substrate were investigated and compared to traditional YIG on GGG. Both materials were characterized in terms of crystal structure, surface morphology, FMR and Gilbert damping, and Raman and XAS spectroscopy. Further, it was found that YIG on graphene-coated GGG exhibits significantly higher microwave losses than standard YIG on GGG (FMR linewidth 30.9 vs 2.1 Oe at 10 GHz, and Gilbert damping coefficient 15.4x10 -4 vs 3.4x10 -4 respectively), which was attributed to increased concentration of Fe 2+ cations in YIG/Graphene/GGG. While the damping is higher in these studied films compared to YIG grown directly on GGG, the resulting properties are still very favorable compared to many other competing materials which can be grown without the need for lattice matched substrates, such as metallic ferromagnets.

36 MATERIALS SCIENCE↗