Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intermodulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Quadrature-multiplex modulation system with application to the Orbiter's Ku-Band link

This paper describes a new frequency multiplex scheme called quadrature-multiplex (QM) modulation which generates the interplexed signal with a simpler system structure and even smaller intermodulation loss than the interplex modulation system under a situation where the data rate of one signal is much greater than those of other signals to be multiplexed. A QM modulator and receiver systems are proposed. The performances of the QM systems are evaluated and compared to the interplex systems. Some design curves are obtained to help the communication systems engineer design the QM system. Finally, a signal is designed using the QM for the Orbiter's Ku-Band return link.

Park, K. Y.↗
NASA NTRS1978

The 3-dimensional radio mapping experiment /SBH/ on ISEE-C

The SBH experiment on ISEE-C will provide maps of the large scale structure of the interplanetary magnetic field from ten solar radii altitude to the earth orbit, in and out of the ecliptic. The SBH instrument will track type III solar radio bursts at 24 frequencies in the range 30 kHz-2 MHz thus providing the positions of 24 points along the line of force which guides the electrons producing the radio radiation. The antennas are two dipoles: one (90 m long) in the spin plane, the other (15 m long) along the spin axis. The receiver was designed for high sensitivity (0.3 microV in 3 kHz BW), high intermodulation rejection (80 dB/1 microV input for order 2 products), large dynamic range (70 dB), high selectivity (-30-dB response 6.5 kHz away from the center frequency of 10.7 MHz for the 3 kHz BW channels), and high reliability (expected orbital life: 3 years).

Knoll, R.↗
NASA NTRS1979

Evaluation of the JPL X-band 32 element active array

Tests performed on an X-band 32-element active array are described. Antenna pattern characteristics of the array were tested in its standard operating mode as well as several degraded performance modes, including failures of 1, 2, 3, 4, 8, 16, and 31 elements. Additionally, the array was characterized with the addition of a metallic shroud, and also characterized versus rf drive level and at a single off-axis electronic beamsteered position. Characterization was performed on several of the 3/4-watt, three-stage, X-band solid-state power amplifier modules. The characterization included swept amplitude response, amplitude and phase versus temperature from -20 to +60 C, and intermodulation distortion of selected modules. The array is described and conclusions and recommendations based upon the experience and results achieved are included.

Boreham, J. F.↗
NASA NTRS1979

Simulation program of nonlinearities applied to telecommunication systems

In any satellite communication system, the problems of distorsion created by nonlinear devices or systems must be considered. The subject of this paper is the use of the Fast Fourier Transform (F.F.T.) in the prediction of the intermodulation performance of amplifiers, mixers, filters. A nonlinear memory-less model is chosen to simulate amplitude and phase nonlinearities of the device in the simulation program written in FORTRAN 4. The experimentally observed nonlinearity parameters of a low noise 3.7-4.2 GHz amplifier are related to the gain and phase coefficients of Fourier Service Series. The measured results are compared with those calculated from the simulation in the cases where the input signal is composed of two, three carriers and noise power density.

Thomas, C.↗
NASA NTRS1980

Considerations in the placement of phase calibration tones

In the use of tones to calibrate unwanted instrumental phases for very long baseline interferometry experiments, certain problems exist which are related to the placement of these phase calibrator tones. (1) A bias exists in an analytically generated stopping function used during correlation if its frequency satisfies the following condition; f = (f sub s)x(m)/n, where f sub s = sampling frequency, m = any integer, and n = any odd integer. (2) Due to the quantized representation of sine waves in the stopping function, odd harmonics of the fundamental frequencies are generated. Several mechanisms are available through which these harmonics can cause errors in the residual phase extracted from the recorded tones. (3) When multiple tones are injected into a pass band, intermodulation products can occur. The magnitude of these effects is discussed along with strategies designed to avoid them.

Young, L. E.↗
NASA NTRS1981

A modular approach toward extremely large apertures

Modular antenna construction can provide a significant increase in reflector aperture size over deployable reflectors. The modular approach allows reflective mesh surfaces to be supported by a minimum of structure. The kinematics of the selected deployable design approach were validated by the subscale demonstration model. Further design refinements on the module structural/joints and design optimization on intermodule joints are needed.

Woods, A. A., Jr.↗
NASA NTRS1981

Interferometric surface-wave acousto-optic time-integrating correlators

A structure for a coherent-interferometric acousto-optic (AO) time-integrating correlator was implemented by using a single surface acoustic wave (SAW) device with tilted transducers to reduce intermodulation terms. The SAW device was fabricated on Y-Z LiNbO3 with a center frequency of 175 MHz, a bandwidth of 60 MHz, and a time aperture of about 10 micros. The density of the photodetector array, with a potential of 120 MHz. Typical integration times are 30 to 40 ms, providing processing gains in excess of 10 to the 6th power. Such a device is useful in providing fast synchronization of communication links and in demodulating to base band and simultaneously acting as a synchronization lock monitor for moderate data rates. Where processing may be limited by Doppler shifts, a two dimensional architecture was implemented to allow full processing gain. Two one-dimensional, SAW AO time-integrating correlators and a two dimensional correlator are evaluated.

Berg, N. J.↗
NASA NTRS1980

Evaluation of pulsed RFI effects on digital satellite repeaters

This paper presents an analytical approach for assessing the effect of pulsed RFI on the error probability of a coherent phase-shift keyed signal through a nonlinear satellite repeater. The RFI is assumed to affect the uplink channel and to consist of CW pulses with random power levels and arriving randomly in time with a Poisson distribution. A model to approximate the effect of intermodulation products is introduced and the error probability conditioned on the output of the satellite repeater is computed. The classical moment technique is then used as an efficient method of averaging the conditional error probability over the numerous random parameters associated with the uplink signal.

Huang, T. C.↗
NASA NTRS1980

Adaptive rain fade compensation

A large available margin must be provided for satellite communications systems operating near 20 GHz, which occasionally experience fades due to rain attenuation. It is proposed that this margin may be achieved in high-capacity FDMA satellites by dynamically providing a large margin to those links which are experiencing deep fades, while maintaining a small fade margin on all others. Single-beam SCPC operation and multiple-beam, satellite-switched FDMA systems are described, and the optimization of the dynamic FDMA links in a severely fading environment is investigated. A solution is derived which takes into account: (1) transponder intermodulation distortion, (2) cochannel and cross-polarization antenna interference, and (3) rain fade characteristics. The sample system configuration presented shows that such systems reach availability levels approaching 0.9999 at Ka-Band.

Rautio, J. C.↗
NASA NTRS1985

Improved RF Isolation Amplifier

Circuit has high reverse isolation and wide bandwidth. Wideband isolation amplifier has low intermodulation distortion and high reverse isolation. Circuit does not require selected or matched components or directional coupling device. Circuit used in applications requiring high reverse isolation such as receiver intermediate-frequency (IF) strips and frequency distribution systems. Also applicable in RF and video signaling.

Stevens, G. L.↗
NASA NTRS1983

The 30 GHz communications satellite low noise receiver

A Ka-band low noise front end in proof of concept (POC) model form for ultimate spaceborne communications receiver deployment was developed. The low noise receiver consists of a 27.5 to 30.0 GHz image enhanced mixer integrated with a 3.7 to 6.2 GHz FET low noise IF amplifier and driven by a self contained 23.8 GHz phase locked local oscillator source. The measured level of receiver performance over the 27.3 to 30.0 GHz RF/3.7 to 6.2 GHz IF band includes 5.5 to 6.5 dB (typ) SSB noise figure, 20.5 + or - 1.5 dB conversion gain and +23 dBm minimum third order two tone intermodulation output intercept point.

Steffek, L. J.↗
NASA NTRS1984

The 20 x 20 high speed microwave switches

Tests were conducted at NASA Lewis Research Center to characterize the proof-of-concept matrix switches built under NASA contract by Ford Aerospace and Aeronautics Corporation at Palo Alto, California, and the General Electric Company at Valley Forge, Pennsylvania. The contract requirements and goals are tabulated along with the results of the NASA tests. Characteristics examined are bandwidth, insertion loss, ripple, switching speed, isolation, standing wave ratio (input and output), deviation from linear phase, noise figure, reconfiguration rates, spurious responses, gain compression, and third order intermodulation distortion. A brief description of the testing method and a statistical analysis of the test results for each of the switches are provided.

Saunders, A.↗
NASA NTRS1983

Source circuit design considerations

The cost of several circuit configurations for large (5MW) array fields were investigated to assess the relative costs of high and low voltage configurations. Three source circuit NOC voltages were evaluated: 400V (ungrounded), 800V (+ or 400V center grounded), and 2000V (+ or - 1000V center grounded). Four source circuit configurations were considered for each of the three NOC voltages. The configurations correspond to source circuit currents of 15, 30, 45, and 60 amperes, respectively. Conceptual layouts for 5MW building blocks for each of the above configurations were developed. The designs were optimized to minimize BOS electrical and structural costs. Only the BOS electrical costs were evaluated. The designs were broken down into the following elements for cost: (1) basic source circuit intermodule wiring, bypass diodes and associated hardware, source circuit to J-Box wiring, etc; (2) J-Box blocking diodes, varistors, heat sinks, and housing; (3) disconnects source circuit disconnects, fuses, and housing; (4) bus cabling J-Box to PCU interface wiring, and trenching; (5) interface bus bar, group disconnects, and fuses; and (6) fault detection shunts, signal wire, electronics, and alarm. It is concluded that high voltage low current circuits are not economical, at higher currents high and low voltage circuit costs approach each other, high voltage circuits are not likely to offer near term advantage, and development work/manufacturer stimulation is needed to develop low cost high voltage hardware.

Noel, G. T.↗
NASA NTRS1984

A K-band GaAs FET amplifier with 8.2-W output power

An 8.2-W GaAs FET amplifier with 38.6 + or - 0.5-dB gain over a 17.7-19.1-GHz frequency band has been developed. This amplifier combines the outputs of eight multistage amplifier modules utilizing a radial combiner. This state-of-the art power level has been achieved with AM/PM of less than 2 deg/dB. The third-order intermodulation products at 1-dB gain compression were 20 dBc, and variation in group delay over the frequency band was less than + or - 0.25 ns. Tests show that the amplifier is unconditionally stable and follows the graceful-degradation principle.

Goel, J.↗
NASA NTRS1985

Shuttle S-band communications technical concepts

Using the S-band communications system, shuttle orbiter can communicate directly with the Earth via the Ground Spaceflight Tracking and Data Network (GSTDN) or via the Tracking and Data Relay Satellite System (TDRSS). The S-band frequencies provide the primary links for direct Earth and TDRSS communications during all launch and entry/landing phases of shuttle missions. On orbit, S-band links are used when TDRSS Ku-band is not available, when conditions require orbiter attitudes unfavorable to Ku-band communications, or when the payload bay doors are closed. the S-band communications functional requirements, the orbiter hardware configuration, and the NASA S-band communications network are described. The requirements and implementation concepts which resulted in techniques for shuttle S-band hardware development discussed include: (1) digital voice delta modulation; (2) convolutional coding/Viterbi decoding; (3) critical modulation index for phase modulation using a Costas loop (phase-shift keying) receiver; (4) optimum digital data modulation parameters for continuous-wave frequency modulation; (5) intermodulation effects of subcarrier ranging and time-division multiplexing data channels; (6) radiofrequency coverage; and (7) despreading techniques under poor signal-to-noise conditions. Channel performance is reviewed.

Seyl, J. W.↗
NASA NTRS1986

Linearized traveling wave amplifier with hard limiter characteristics

A dynamic velocity taper is provided for a traveling wave tube with increased linearity to avoid intermodulation of signals being amplified. In a traveling wave tube, the slow wave structure is a helix including a sever. A dynamic velocity taper is provided by gradually reducing the spacing between the repeating elements of the slow wave structure which are the windings of the helix. The reduction which takes place coincides with the ouput point of helix. The spacing between the repeating elements of the slow wave structure is ideally at an exponential rate because the curve increases the point of maximum efficiency and power, at an exponential rate. A coupled cavity traveling wave tube having cavities is shown. The space between apertured discs is gradually reduced from 0.1% to 5% at an exponential rate. Output power (or efficiency) versus input power for a commercial tube is shown.

Kosmahl, H. G.↗
NASA NTRS1987

Technology for submillimeter wave remote sensing

NASA's sub-mm wave technology development program addresses emerging possibilities in spaceborne sensor design for what is one of the few unexplored regions of the spectrum, from 1.0 to 0.1 mm wavelengths. Astrophysics, earth atmosphere research and solar system exploration can all benefit from the development of such sensor capabilities. Technology status evaluations are presented for Shottky-diode and SIS mixers, solid state and backward wave oscillators, intermodulation frequency amplifiers, and digital autocorrelator and acoustooptic spectrometers.

Sokoloski, Martin M.↗
NASA NTRS1988

Embedding triple-modular redundancy into a hypercube architecture

This paper describes an embedding of Triple Modular Redundancy (TMR) into a binary hypercube. The goal is to improve fault tolerance by masking any single-point faults. Each module of an application task is triplicated and executed in parallel on three nodes of a 2-dimensional subcube (Q2) of the hypercube. Each of these nodes also executes a voter process. The remaining node is used for message passing only. All outputs from the triplicated modules are voted on, and the voting results are transmitted to the appropriate destination. Thus, all interunit messages are also triplicated. We propose an embedding of TMR into a hypercube which can be implemented in a manner transparent to the application program. Subcubes are allocated so that the address space for the TMR units is also a hypercube. Hence, the subcube allocation and intermodule communication schemes are defined to be analogous to the schemes used in the nonredundant system. The embedded system is proven to mask all single-point faults.

Kiskis, Daniel L.↗