Search NASA⌕ Search

SEARCH · Search NASA

Results for “Joule heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The effect of different resistivity models on magnetotail dynamics

Two-dimensional, time-dependent MHD simulations of the interaction between the solar wind and the earth's magnetosphere have been performed to study magnetotail dynamics with varying forms of anomalous resistivity. In general, the resulting models conform to the neutral line model proposed for substorms with near-earth x points and high-speed tailward flows occurring in the magnetotail. However, in the case where Joule heating is included in the physical description of the system, the near-earth x point never moves far down tail, and high-speed tailward flows never stop. Only in the case where there is no Joule heating does the x point move down tail. Simultaneously, the high-speed tailward flows cease. These results indicate that the mechanism of energy dissipation can have an important effect on reconnection processes and the global magnetospheric dynamics.

Lyon, J. G.↗
NASA NTRS1984

Electromagnetic damping of neutron star oscillations

A simple model of magnetic field perturbations driven by neutron star oscillations is used to estimate the electromagnetic power radiated by g-modes and torsional oscillations. The calculation assumes that the neutron star has a frozen-in magnetic field which is perturbed by the oscillatory motions of the surface. The disturbances propagate into the vacuum as outgoing electromagnetic waves. The relative effectiveness of Joule heating of the neutron star crust by pulsation-induced electric currents is estimated. It is concluded that electromagnetic damping is the dominant energy dissipation mechanism for quadrupole g-mode oscillations of neutron stars. For dipole spheroidal modes, both electromagnetic radiation and Joule heating are important, and there is no gravitational radiation emitted by these modes.

Mcdermott, P. N.↗
NASA NTRS1988

On the structure and circulation of the polar thermosphere under magnetically quiet conditions

A theoretical study of the thermospheric circulation and composition at polar latitudes is presented. It is suggested that the observed motions and density perturbations in N2, O and He can be understood in terms of electric field momentum coupling, Joule heating, and interactions between these two processes. It is found that the vortex type double cell polar circulation is primarily driven by collisional momentum transfer from electric field induced ion convection. Because of the thermospheric low pass filter, a large time independent component is produced by Joule heating. Due to wind induced diffusion, the N2 is concentrated where the O and He are depleted and vice versa. The electric field driven vortex circulation redistributes the mass and energy in the time independent density and temperature variations, producing primarily diurnal variations in the temperature and composition near the pole and at auroral latitudes.

Mayr, H. G.↗
NASA NTRS1986

A morphological study of waves in the thermosphere using DE-2 observations

Theoretical model and data analysis of DE-2 observations for determining the correlation between the neutral wave activity and plasma irregularities have been presented. The relationships between the observed structure of the sources, precipitation and joule heating, and the fluctuations in neutral and plasma parameters are obtained by analyzing two measurements of neutral atmospheric wave activity and plasma irregularities by DE-2 during perigee passes at an altitude on the order of 300 to 350 km over the polar cap. A theoretical model based on thermal nonlinearity (joule heating) to give mode-mode coupling is developed to explore the role of neutral disturbance (winds and gravity waves) on the generation of plasma irregularities.

Gross, S. H.↗
NASA NTRS1983

Transient brightenings of interconnecting loops. III Interpretation

Two alternative interpretations of the sudden X-ray brightenings observed in loops that interconnect active regions are presented. A fast tearing mode may be excited in those newly formed interconnecting loops within which sufficient magnetic free energy is stored to drive the mode. Alternatively, anomalous Joule heating driven by an inductive electric field parallel to the magnetic field, varying on a time scale of order of a minute, may cause the brightenings. It is suggested that it is plausible that the fast tearing mode may be the cause of brightenings in the young newly formed interconnecting loops, whereas the anomalous Joule heating might occur in old loop connections when an exteral disturbance propagates through them.

Spicer, D. S.↗
NASA NTRS2008

Monitoring and Forecasting Space Weather in Geospace Environment

For improving the reliability of Space Weather prediction, we developed a new, Polar Magnetic (PM) index of geomagnetic activity, which shows high correlation with both upstream solar wind data and related events in the magnetosphere and ionosphere. Similarly to the existing polar cap PC index, the new PM index was computed from data from two near-pole geomagnetic observatories; however, the method for computing the PM index is different. The high correlation of the PM index with both solar wind data and events in Geospace environment makes possible to improve significantly forecasting geomagnetic disturbances and such important parameters as the cross-polar-cap voltage and global Joule heating, which play an important role in the development of geomagnetic, ionospheric and thermospheric disturbances. We tested the PM index for 10-year period (1995-2004). The correlation between PM index and upstream solar wind data for these years is very high (the average correlation coefficient R approximately equal to 0.86). The PM index also shows the high correlation with the cross-polar-cap voltage and hemispheric Joule heating (the correlation coefficient between the actual and predicted values of these parameters approximately equal to 0.9), which results in significant increasing the prediction reliability of these parameters. Using the PM index of geomagnetic activity provides a significant increase in the forecasting reliability of geomagnetic disturbances and related events in Geospace environment. The PM index may be also used as an important input parameter in modeling ionospheric, magnetospheric, and thermospheric processes.

Lyatsky, Wladislaw↗
NASA NTRS2008

A New Polar Magnetic Index of Geomagnetic Activity and its Application to Monitoring Ionospheric Parameters

For improving the reliability of Space Weather prediction, we developed a new, Polar Magnetic (PM) index of geomagnetic activity, which shows high correlation with both upstream solar wind data and related events in the magnetosphere and ionosphere. Similarly to the existing polar cap PC index, the new, PM index was computed from data from two near-pole geomagnetic observatories; however, the method for computing the PM index is different. The high correlation of the PM index with both solar wind data and events in Geospace environment makes possible to improve significantly forecasting geomagnetic disturbances and such important parameters as the cross-polar-cap voltage and global Joule heating in high latitude ionosphere, which play an important role in the development of geomagnetic, ionospheric and thermospheric disturbances. We tested the PM index for 10-year period (1995-2004). The correlation between PM index and upstream solar wind data for these years is very high (the average correlation coefficient R approximately equal to 0.86). The PM index also shows the high correlation with the cross-polar-cap voltage and hemispheric Joule heating (the correlation coefficient between the actual and predicted values of these parameters is approximately 0.9), which results in significant increasing the prediction reliability of these parameters. Using the PM index of geomagnetic activity provides a significant increase in the forecasting reliability of geomagnetic disturbances and related events in Geospace environment. The PM index may be also used as an important input parameter in modeling ionospheric, magnetospheric, and thermospheric processes.

Lyatsky, Wladislaw↗
NASA NTRS1973

A composite model for a class of electric-discharge shock tubes

A gasdynamic model is presented and analyzed for a class of shock tubes that utilize both Joule heating and electromagnetic forces to produce high-speed shock waves. The model consists of several stages of acceleration in which acceleration to sonic conditions is achieved principally through heating, and further acceleration of the supersonic flow is obtained principally through use of electromagnetic forces. The utility of the model results from the fact that it predicts a quasi-steady flow process, mathematical analysis is straightforward, and it is even possible to remove one or more component stages and still have the model related to a possible shock-tube flow. Initial experiments have been performed where the electrical discharge configuration and current level were such that Joule heating was the dominant form of energy addition present. These experiments indicate that the predictions of the model dealing with heat addition correspond quite closely to reality. The experimental data together with the theory show that heat addition to the flowing driver gas after diaphragm rupture (approach used in the model) is much more effective in producing high-speed shock waves than heating the gas in the driver before diaphragm rupture, as in the case of the arc-driven shock tube.

Elkins, R. T.↗
NASA NTRS1995

One-dimensional hybrid satellite track model for the Dynamics Explorer 2 (DE 2) satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. (1985) satellite track code but also includes elements of Roble et al. (1987b) global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the Mass Spectrometer Incoherent Scatter 1990 (MSIS-90) model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule heating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗
NASA NTRS1986

Particle precipitaion into the thermosphere (invited review)

A review of research on particle precipitation into the thermosphere is presented. Particle precipitation plays an important role in thermospheric dynamics, often being both the most important ionization source and the most important heat source, comparable to Joule heating rates in the auroral zones and typically exceeding solar ultraviolet as an ionization mechanism in the nightside auroral zones and winter polar caps. Rees (1963) has shown that, roughly speaking, one electron-ion pair is produced by each 35 eV of incident electron energy flux; thus, over half of the incident electron energy flux goes into heating rather than into ionization. Precipitating ions also can produce ionization, also requiring roughly 35 eV per pair; however, since ion energy fluxes are typically much weaker than electron fluxes, they have often been neglected. The particle precipitation into the thermosphere is both an important ionization source and an important heat source; since the globally integrated value can vary over more than a factor of ten, and the instantaneous local rate can vary over nearly three orders of magnitude global, maps of precipitation rates are extremely important for predicting thermospheric weather.

Reiff, P. H.↗
NASA NTRS2012

The Role of Compressibility in Energy Release by Magnetic Reconnection

Using resistive compressible magnetohydrodynamics, we investigate the energy release and transfer by magnetic reconnection in finite (closed or periodic) systems. The emphasis is on the magnitude of energy released and transferred to plasma heating in configurations that range from highly compressible to incompressible, based on the magnitude of the background beta (ratio of plasma pressure over magnetic pressure) and of a guide field in two-dimensional reconnection. As expected, the system becomes more incompressible, and the role of compressional heating diminishes, with increasing beta or increasing guide field. Nevertheless, compressional heating may dominate over Joule heating for values of the guide field of 2 or 3 (in relation to the reconnecting magnetic field component) and beta of 5-10. This result stems from the strong localization of the dissipation near the reconnection site, which is modeled based on particle simulation results. Imposing uniform resistivity, corresponding to a Lundquist number of 10(exp 3) to 10(exp 4), leads to significantly larger Ohmic heating. Increasing incompressibility greatly reduces the magnetic flux transfer and the amount of energy released, from approx. 10% of the energy associated with the reconnecting field component, for zero guide field and low beta, to approx. 0.2%-0.4% for large values of the guide field B(sub y0) > 5 or large beta. The results demonstrate the importance of taking into account plasma compressibility and localization of dissipation in investigations of heating by turbulent reconnection, possibly relevant for solar wind or coronal heating.

Birn, J.↗
NASA NTRS1979

Recycling isoelectric focusing with computer controlled data acquisition system

Isoelectric focusing is a high-resolution technique for separating and purifying large peptides, proteins, and other biomolecules. The apparatus described in the present paper constitutes a new approach to fluid stabilization and increased throughput. Stabilization is achieved by flowing the process fluid uniformly through an array of closely spaced filter elements oriented parallel both to the electrodes and the direction of the flow. This seems to overcome the major difficulties of parabolic flow and electroosmosis at the walls, while limiting the convection to chamber compartments defined by adjacent spacers. Increased throughput is achieved by recirculating the process fluid through external heat exchange reservoirs, where the Joule heat is dissipated.

Egen, N. B.↗
NASA NTRS1983

Turbulent resistive heating of solar coronal arches

The possibility that coronal heating occurs by means of anomalous Joule heating by electrostatic ion cyclotron waves is examined, with consideration given to currents running from foot of a loop to the other. It is assumed that self-fields generated by the currents are absent and currents follow the direction of the magnetic field, allowing the plasma cylinder to expand radially. Ion and electron heating rates are defined within the cylinder, together with longitudinal conduction and convection, radiation and cross-field transport, all in terms of Coulomb and turbulent effects. The dominant force is identified as electrostatic ion cyclotron instability, while ion acoustic modes remain stable. Rapid heating from an initial temperature of 10 eV to 100-1000 eV levels is calculated, with plasma reaching and maintaining a temperature in the 100 eV range. Strong heating is also possible according to the turbulent Ohm's law and by resistive heating.

Benford, G.↗
NASA NTRSDate not supplied

Designing the Imaging and Breadboard System for FBCE-TL Project

This presentation outlines the support work done on designing the imaging and breadboard system of the Transfer Line (TL) project, which is the third module for the Flow Boiling and Condensation Experiment (FBCE) operating in the Fluids Integrated Rack on-board the International Space Station (ISS). The goal of the FBCE is to serve as a facility for flow boiling and condensation investigating two-phase flow and heat transfer data in microgravity. The TL module aims use existing FBCE hardware to study cryogenic chilldown, a large component of cryogenic propellant tank transfer research. The TL test module will perform chilldown studies with normal-perfluorohexane (nPFH), a cryogenic simulant, flowing through a super-heated line, which is heated through the process of Joule-heating. SolidWorks and Creo were used to create electrically conductive pipe junctions that connect and seal several Indium Tin Oxide (ITO) coated sapphire tube sections together to allow for low leak probability fluid flow and circumferentially uniform electrical current density. It is necessary to understand and calculate the thermal expansion of the tubing sections such that the junctions would not leak at anticipated operating temperatures and pressures, would maintain electrical contact, and not crack the crystalline tubes. Optical imaging techniques were used to build an experimentally validated image remapping process for flight-like setups of cylindrical tubes. Then MATLAB was used to create an algorithm that distorts an image based on the refraction of light passing through the mediums we were imaging through to accurately visualize the cryogenic chilldown that is of scientific interest. This research will assist NASA to move forward with long-duration spaceflight missions where knowledge of efficient heat transfer processes becomes more critical.

imaging system↗
NASA NTRS1991

The high-pressure melting curve of iron - A technical discussion

The melting curve of iron is reliably determined to 105 GPa using the laser-heated diamond cell, in close agreement with independent measurements using piston-cylinder and large-volume presses or shock-wave experiments. In order to obtain reliable melting data from the internally heated diamond cell, whether by laser or Joule heating, temperature gradients across the sample must be quantitatively measured; otherwise, such 'wire heating' experiments can lead to significant underestimates of the melting temperature and its pressure dependence. The best estimate of the high-pressure melting curve of iron, as derived from the laser-heated diamond cell and Hugoniot temperature measurements, yields melting temperatures of 4800 + or - 200 K and 6700 + or - 400 K at 133 GPa and 243 GPa, respectively.

Williams, Quentin↗
NASA NTRS1993

Thermal profiles in the auroral regions of Jupiter

The temperature structure within the northern auroral region of Jupiter is studied by reanalyzing the Voyager 1/infrared interferometer and radiometer spectrometer (IRIS) spectra. The total measured excess infrared auroral zone emission (averaged over the IRIS field of view) in the hydrocarbon bands between 7 and 13 microns is found to be about 208 ergs/cm/s over an area of about 2 x 10(exp 18) sq cm with a resulting power output of 4 x 10(exp 13) W. In comparison, the total energy deposition by magnetospheric charged particles has been estimated on the basis of UV observations to range between 1 x 10(exp 13) and 4 x 10(exp 13) W over a comparable area. The large amount of radiated energy observed in the infrared may imply an additional heat source in the auroral regions (possibly Joule heating). A new set of thermal profiles of Jupiter's high-latitude upper atmosphere has also been derived. These profiles have a large temperature enhancement in the upper stratosphere and are constrained to reproduce the CH4 emission at 7.7 microns. The emission in the other hydrocarbon bands (C2H2 and C2H6) is found to depend on the depth to which the temperature enhancement extends, which further constrains the thermal profiles. This study shows that a large temperature enhancement in the upper stratosphere and lower thermosphere can explain the observed excess hydrocarbon emission bands; thus smaller variations in hydrocarbon abundances (between the high latitudes and the equatorial and middle latitudes) are required than has been assumed in previous models.

Drossart, Pierre↗
NASA NTRS1977

Observations of joule and particle heating in the auroral zone

Observational data from the Chatanika, Alaska incoherent scatter radar have been used to deduce atmospheric heating rates associated with particle precipitation and joule dissipation. During periods when Chatanika is in the vicinity of the auroral oval the height-integrated heat input to the lower thermosphere can be as large as 100 ergs per sq cm per sec with joule and particle heating rates of comparable magnitude. Altitude profiles of these heat inputs are also obtained, showing that the energy liberated by joule dissipation tends to peak at a substantially higher altitude (about 130 km) than that due to particles (100-120 km). As a consequence, it follows that joule heating can be expected to provide a rapid means for creating thermospheric disturbances. It is also pointed out that joule and particle heating are permanent features of the auroral oval and polar cap. As such, expansion of the auroral oval leads to an increase in the total global heating and, hence, to the close relationship between magnetic disturbances and thermospheric perturbation.

Banks, P. M.↗