SEARCH · Search NASA
Results for “KANs”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The ladder and readout cables of intermediate silicon strip detector for sPHENIX
A new silicon-strip-type detector was developed for precise charged-particle tracking in the central rapidity region of heavy ion collisions. A new detector and collaboration at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory is sPHENIX, which is a major upgrade of the PHENIX detector. The intermediate tracker (INTT) is part of the advanced tracking system of the sPHENIX detector complex together with a CMOS monolithic-active-pixel-sensor based silicon-pixel vertex detector, a time-projection chamber, and a micromegas-based detector. The INTT detector is barrel shaped and comprises 56 silicon ladders. Two different types of strip sensors of 78 micron pitch and 320 micron thick are mounted on each half of a silicon ladder. Each strip sensor is segmented into 8 × 2 and 5 × 2 blocks with lengths of 16 and 20 mm. Strips are read out with a silicon strip-readout (FPHX) chip. In order to transmit massive data from the FPHX to the down stream readout electronics card (ROC), a series of long and high speed readout cables were developed. This document focuses on the silicon ladder, the readout cables, and the ROC of the INTT. The radiation hardness is studied for some parts of the INTT devices in the last part of this document, since the INTT employed some materials from the technology frontier of the industry whose radiation hardness is not necessarily well known.
A model to assess Zircaloy’s mechanical property changes following a transient beyond critical heat flux
Maintaining the integrity of nuclear fuel rods is essential for ensuring public health and safety in nuclear power generation. During reactor operation, this integrity is confirmed by demonstrating compliance with established regulatory acceptance criteria. For moderate-frequency events, such as limiting transients and anticipated operational occurrences (AOOs), the current fuel integrity criterion is based on preventing boiling transition. This criterion assumes that prevention of boiling transition will prevent excessive cladding heating and, thus, fuel failure during normal operations. While conservative, this approach places significant constraints on core design, fuel cycle economics, and a plant’s ability to perform major power uprates, leading to suboptimal fuel utilization and inefficient carbon-free energy production. A more efficient approach could be achieved by revising the failure criterion to a material-specific limit rather than strictly preventing the boiling transition, since boiling transition per se is not a cause of fuel cladding failure. Here, as a result, a new licensing framework based on material properties, termed time-at-temperature (t@T), is needed. This approach would allow for brief periods of post–critical heat flux operation during an AOO without compromising safety. Implementing the t@T licensing strategy requires a robust technical foundation in material properties, which must be established through comprehensive data collection on both unirradiated and irradiated fuel and cladding materials. This foundation would enable the development of a safety basis that ensures safe operation while providing greater flexibility and efficiency for reactor operation. This paper documents a thorough review of the available data to establish a baseline knowledge that can inform the development of cladding mechanical models, as well as identify experimental data gaps that need to be addressed in future research. Machine learning and data informatics were utilized to extract the importance of parameters on the t@T parameter. Industry tools were used to perform baseline analyses to define the relevant transient conditions for data analysis. The subsequent review successfully identified applicable experimental data, as well as sufficient data to evaluate changes in cladding mechanical properties following an AOO transient. Rather than developing new models, this work coupled existing irradiation annealing and recrystallization models to calculate changes in hardness, yield stress, and ultimate tensile stress following an AOO event. The findings from this review were summarized to highlight the experimental data needs required to fill remaining gaps and support the development of future t@T licensing methodologies.
Active microbial biomass decreases, but microbial growth potential remains similar across soil depth profiles under deeply-vs. shallow-rooted plants
Climate-smart land management practices that replace shallow-rooted annual crop systems with deeply-rooted perennial plants can contribute to soil carbon sequestration. However, deep soil carbon accrual may be influenced by active microbial biomass and their capacity to assimilate fresh carbon at depth. Incorporating active microbial biomass, dormancy, and growth in microbially-explicit models can improve our ability to predict soil's capacity to store carbon. But, so far, the microbial parameters that are needed for such modeling are poorly constrained, especially in deep soil layers. Here, we used a lab incubation experiment and growth kinetics model to estimate how microbial parameters vary along 240 cm of soil depth in profiles under shallow- (soy) and deeply-rooted (switchgrass) plants 11 years after plant cover conversion. We also assessed resource origin and availability (total organic carbon, 14 C, extractable organic carbon, specific UV absorbance of K 2 SO 4 extractable organic C, total nitrogen, total dissolved nitrogen) along the soil profiles to examine associations between soil chemical and biological parameters. Even though root biomass was greater and rooting depth was deeper under switchgrass than soy, resource availability and microbial growth parameters were generally similar between vegetation types. Instead, depth significantly influenced soil chemical and biological parameters. For example, resource availability and total and relative active microbial biomass decreased with soil depth. Decreases in the relative active microbial biomass coincided with increased lag time (response time to external carbon inputs) along the soil profiles. Even at a depth of 210–240 cm, microbial communities were activated to grow by added resources within a day. Maximum specific growth rate decreased to a depth of 90 cm and then remained consistent in deeper layers. Our findings show that >10 years of vegetation and rooting depth changes may not be long enough to alter microbial growth parameters, and suggest that at least a portion of the microbial community in deep soils can grow rapidly in response to added resources. Our study determined microbial growth parameters that can be used in microbially-explicit models to simulate carbon dynamics in deep soil layers.
Addressing solar photochemistry durability with an amorphous nickel antimonate photoanode
Not Available
Role of climate goals and clean-air policies on reducing future air pollution deaths in China: a modelling study
Over 3 million people still die every year from diseases caused by exposure to outdoor PM 2.5 air pollution, and more than a quarter of these premature deaths occur in China. In addition to clean air policies that target pollution emissions, climate policies aimed at reducing fossil-fuel CO 2 emissions (e.g., to avoid 1.5°C of warming) may also dramatically improve air quality and public health. Yet there has been no comprehensive accounting of public health outcomes under different energy pathways and local clean air management decisions in China. In particular, further research is needed to understand the relationships among climate and clean air polices and future health burdens in China, where an aging population will further exacerbate the impacts of air pollution. Using a China-focused integrated assessment model (GCAM-China) and a dynamic emission projection model (DPEC), we project future Chinese air quality in scenarios spanning a range of global climate targets (i.e. 1.5°0C, 2°C, NDC, unambitious, baseline, and 4.5°C) as well as national clean air actions (i.e. 2015-pollution, current-pollution, and ambitious-pollution). We then evaluate the health impacts of PM2·5 air pollution of scenario matrix using the chemical transport model WRF-CMAQ and the latest epidemiological concentration–response (C-R) functions (i.e. GBD2019). We find that, without ambitious climate mitigation (e.g., under current NDC pledges), Chinese deaths related the PM2.5 air pollution do not substantially decrease—and often grow—by mid-century, regardless of clean air policies and air quality improvements. For example, in scenarios that track China’s current NDC pledge and deploy best-available pollution control technologies, PM 2.5 -related deaths in China decrease slightly by 2030 (to 1.2 million per year) but no further by mid-century (Ambitious-pollution-NDC-goals; 1.2 million deaths in 2050) despite substantial and continuous improvements in population-weighted air quality (27.2 to 16.0 µg/m 3 from 2030 to 2050). The contrary trends of improving air quality and increasing PM 2·5 -related deaths in many of our scenarios reveals the extent to which extra efforts are needed to compensate for the established fact of increasing age of China’s population in future. Substantial decreases in China’s PM 2.5 -related deaths and age-standardized death rates (e.g., decreasing by 0.3–0.5 million deaths and 10.2–14.2 per 100,000 population age-standardized death rates per year) thus require the sort of large-scale transition in energy sources entailed by scenarios that meet international climate goals to avoid 1.5°C and 2°C of warming (Ambitious-pollution-2°C- and 1.5°C-goals).
Photo-Crosslinkable Naphthalene Diimide Polymer for Solution-Processed n – i – p Perovskite Solar Cells
We copolymerize a norbornene monomer bearing a pendant naphthalene diimide with a norbornene bearing a cinnamate pendant moiety to synthesize a crosslinkable electron-transporting polymer and study its use in solution-processed n–i–p perovskite solar cells. The crosslinked material exhibits over 90% transparency in the visible region and higher thermal stability (>300 °C) and lower surface energy than the corresponding homopolymer of the naphthalene diimide functionalized norbornene. Coating an ITO surface with the photo-crosslinked copolymer yields a slightly lower work function than homopolymer-coated ITO. We show that the morphologies of the perovskite films deposited on both polymers are similar (~300 nm features) based upon scanning electron microscopy. Our solar-cell device results show that the crosslinked naphthalene diimide polymer gives a higher open-circuit voltage (1.08 vs 1.05 V), fill factor (average 64.43 vs 58.77%), and stabilized power conversion efficiency (12.28 vs 10.33%) compared to its non-crosslinked homopolymer counterpart, as well as reduced hysteresis. As a result, we attribute the improved performance to decreased work function, reduced nonradiative recombination, and higher shunt resistance.
Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers
Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.
Unveiling Unusual Reactivity of SO 2 and Unusual Type of S–X Long Bonds
A new reactivity of SO 2 to form unusual stable M−X−SO 2 (X = F, Cl, H) complexes is unveiled in this study. Moreover, a new type of S−X long bonds, which are significantly longer than traditional S−X covalent bonds, has been discovered. The P,N-ligated Ni−F complex model 1A can bind a SO 2 molecule through the new F−S long bond (2.207 Å), and a stable Ni−F−SO 2 complex 1B is generated, being exergonic by 2.2 kcal/mol. According to natural localized molecular orbital analysis, the new S−F long bond has a unique p(F) → π*(O=S=O) bonding interaction, which is shown to arise from the long S−F length. In comparison, the strength of the new F−S long bond (−2.2 kcal/mol) is found to be significantly stronger than common noncovalent interactions such as the hydrogen and halogen bond. The substituent modulations suggest that the electron-donating groups can increase the strength of new F−S bonds and enhance binding free energies ΔG bind . The scope of possible M−X complexes was explored, and various metals and X (F, Cl, and H) ligands were found to form stable M−X−SO 2 complexes. Specifically, the anionic M−X complexes display much higher ΔG bind values, ranging from −8 to −10 kcal/mol. The study paves the way for a green, recyclable, and adjustable SO 2 absorption method.
Structure and Electronic Effects from Mn and Nb Co-doping for Low Band Gap BaTiO[subscript 3] Ferroe
Explore the source record for details and available documents.
Spectral Signatures of a Negative Polaron in a Doped Polymer Semiconductor: Energy Levels and Hubbard U Interactions
The modern picture of negative charge carriers on conjugated polymers invokes the formation of a singly occupied (spin-up/spin-down) level within the polymer gap and a corresponding unoccupied level above the polymer conduction band edge. The energy splitting between these sublevels is related to on-site Coulomb interactions between electrons, commonly termed Hubbard U. However, spectral evidence for both sublevels and experimental access to the U value is still missing. Here, in this work, we provide evidence by n-doping the polymer P(NDI 2 OD-T 2 ) with [RhCp*Cp] 2 , [N-DMBI] 2 , and cesium. Changes in the electronic structure after doping are studied with ultraviolet photoelectron and low-energy inverse photoemission spectroscopies (UPS, LEIPES). UPS data show an additional density of states (DOS) in the former empty polymer gap while LEIPES data show an additional DOS above the conduction band edge. These DOS are assigned to the singly occupied and unoccupied sublevels, allowing determination of a U value of ~1 eV.
Synergic Effects of Surface Chemistry and Applied Potentials on the Kinetics of the Electrocatalytic Oxygen Evolution Reaction in IrO 2
Improving the efficacy of the oxygen evolution reaction (OER) through water oxidation is critical for advancing photoelectrochemical water splitting. Among the catalysts, IrO 2 exhibits a high OER catalytic activity and stability under acidic conditions. The OER mechanism in this system has been a topic of intense research; however, many mechanistic understandings are lacking. In this work, we carried out first-principles calculations with an implicit solvation model at a constant potential to study the OER behavior on the IrO 2 (110) surface. We find that the surface hydrogen coverage has a significant effect on OER kinetics and transition states. We then develop a microkinetics model that accounts for the continuous evolution of both OER activation energy and hydrogen coverage as a function of an applied potential. We show that this inclusion leads to significant improvement in the simulated Tafel plot compared to available experiments. In conclusion, our results point to a complex interplay between surface chemistry and the applied potential on OER kinetics.
Structural and Electrochemical Impacts of Mg/Mn Dual Dopants on the LiNiO 2 Cathode in Li-Metal Batteries
Doping chemistry has been regarded as an efficient strategy to overcome some fundamental challenges facing the “no-cobalt” LiNiO 2 cathode materials. By utilizing the doping chemistry, we evaluate the battery performance and structural/chemical reversibility of a new no-cobalt cathode material (Mg/Mn-LiNiO 2 ). The unique dual dopants drive Mg and Mn to occupy the Li site and Ni site, respectively. We report the Mg/Mn-LiNiO 2 cathode delivers smooth voltage profiles, enhanced structural stability, elevated self-discharge resistance, and inhibited nickel dissolution. As a result, the Mg/Mn-LiNiO 2 cathode enables improved cycling stability in lithium metal batteries with the conventional carbonate electrolyte: 80% capacity retention after 350 cycles at C /3, and 67% capacity retention after 500 cycles at 2 C (22 °C). We then take the Mg/Mn-LiNiO 2 as the platform to investigate the local structural and chemical reversibility, where we identify that the irreversibility takes place starting from the very first cycle. The highly reactive surface induces the surface oxygen loss, metal reduction reaching the subsurface, and metal dissolution. Our data demonstrate that the dual dopants can, to some degree, mitigate the irreversibility and improve the cycling stability of LiNiO 2 , but more efforts are needed to eliminate the key challenges of these materials for battery operation in the conventional carbonate electrolyte.
Characterizing and Improving the Thermal Stability of Organic Photovoltaics Based on Halogen-Rich Non-Fullerene Acceptors
In this work, the thermal stability of inverted, halogen-rich non-fullerene acceptor (NFA)-based organic photovoltaics (OPVs) with MoO x as the hole transporting layer is studied at temperatures up to 80°C. Over time, the power conversion efficiency shows a “check-mark” shaped thermal aging pattern, featuring an early decrease, followed by a long-term recovery. A high Cl concentration at the BHJ/MoO x interface in the thermally aged device is found using energy dispersive X-ray spectroscopy. X-Ray photoelectron spectroscopy shows that the MoO x is chlorinated after thermal aging. With bulk quantum efficiency analysis, we propose an explanation to the check-mark shaped pattern. Inserting a thin C 70 layer between the BHJ and MoO x suppresses the thermal degradation mechanisms, resulting in 3 orders of magnitude increase in device lifetime at 80°C.
Distinct Surface and Bulk Thermal Behaviors of LiNi 0.6 Mn 0.2 Co 0.2 O 2 Cathode Materials as a Function of State of Charge
Understanding how structural and chemical transformations take place in particles under thermal conditions can inform designing thermally robust electrode materials. Such a study necessitates the use of diagnostic techniques that are capable of probing the transformations at multiple length scales and at different states of charge (SOC). In this study, the thermal behavior ofLiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-622) was examined as a function of SOC, using an array of bulk and surface-sensitive techniques. In general, thermal stability decreases as lithium content is lowered and conversion in the bulk to progressively reduced metal oxides (spinels, rock salt) occurs as the temperature is raised. Hard X-ray absorption spectroscopy (XAS) and X-ray Raman spectroscopy (XRS) experiments, which probe the bulk, reveal that Ni and Co are eventually reduced when partially delithiated samples (regardless of the SOC) are heated, although Mn is not. Surface-sensitive synchrotron techniques, such as soft XAS and transmission X-ray microscopy (TXM), however, reveal that for 50% delithiated samples, apparent oxidation of nickel occurs at particle surfaces under some circumstances. This is partially compensated by reduction of cobalt but may also be a consequence of redistribution of lithium ions upon heating. TXM results indicate the movement of reduced nickel ions into particle interiors or oxidized nickel ions to the surface or both. These experiments illustrate the complexity of the thermal behavior of NMC cathode materials. The study also informs the importance of investigating the surface and bulk difference as a function of SOC when studying the thermal behaviors of battery materials.
Modularly Constructed Polyhedral Oligomeric Silsesquioxane-Based Giant Molecules for Unconventional Nanostructure Fabrication
Controlled assembly of nanoscale building blocks is a promising approach to obtain functional materials with unique properties. In this paper, we report a way to manipulate the supramolecular structures of giant molecules based on discotic triangle cores and isobutyl polyhedral oligomeric silsesquioxanes (BPOSS) nanoparticles (NPs). It is found that depending upon the number of BPOSS at the periphery of the discotic cores, the packing of these nanoscale components (discotic core and POSS) could be manipulated into either cylindrical or Frank–Kasper (F–K) A15 ($Pm\overline 3n$) phases. The formation of these supramolecular nanostructures is mandated by the balance between the stacking of the discotic cores and the steric hindrance effect of the BPOSS NPs. This strategy to manipulate the packing of nanoscale building blocks for different supramolecular nanostructures including the fabrication of cylindrical structures and A15 ($Pm\overline 3n$) phases may be extended to other nanoscale building blocks for future development of materials with complex structures as well as tailored functionalities and properties.
Combinatorial Synthesis of Oxysulfides in the Lanthanum–Bismuth-Copper System
Establishing synthesis approaches for a target material constitutes a grand challenge in materials research, which is compounded with use-inspired specifications on the format of the material. Solar photochemistry using thin film materials is a promising technology for which many complex materials are being proposed, and the present work describes application of combinatorial methods to explore the synthesis of predicted La–Bi–Cu oxysulfide photocathodes, in particular alloys of LaCuOS and BiCuOS. The variation in concentration of three cations and two anions in thin film materials, and crystallization thereof, is achieved by a combination of reactive sputtering and thermal processes including reactive annealing and rapid thermal processing. Composition and structural characterization establish composition-processing-structure relationships that highlight the breadth of processing conditions required for synthesis of LaCuOS and BiCuOS. The relative irreducibility of La oxides and limited diffusion indicate the need for high temperature processing, which conflicts with the temperature limits for mitigating evaporation of Bi and S. Collectively the findings indicate that alloys of these phases will require reactive annealing protocols that are uniquely tailored to each composition, motivating advancement of dynamic processing capabilities to further automate discovery of synthesis routes.
Enabling Facile Anionic Kinetics through Cationic Redox Mediator in Li-Rich Layered Cathodes
Anionic oxygen redox has aroused great interests in developing high-capacity Li-ion battery cathode materials. The fundamental understanding of this concept, compared to cationic redox, has promoted extensive studies on lithium transition metal oxides including those of 4d and 5d transition metals. Lithium ruthenium oxide has been found to exhibit a reversible anionic redox upon cycling. However, lithium-rich layered oxide with anionic redox is still facing great challenges such as sluggish kinetics. Here we investigate the effect of cationic redox on the kinetics of anionic reaction when they are strongly coupled. We report the cobalt substituted lithium ruthenium oxide, where all Ru, Co and O redox participate in the charge compensation mechanism in relatively defined voltage regions. Additionally, the improved anionic kinetics is attributed to the fast cationic Co redox process that serves as a redox mediator. Our work sheds light into the potential direction to address the commonly believed sluggish anionic kinetics in high-capacity oxygen-redox cathode materials.