Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Development of a Geothermal Module in reV: Quantifying the Geothermal Potential while Accounting for the Geospatial Intersection of the Grid Infrastructure and Land Use Characteristics

The Renewable Energy Potential (reV) model is a geospatial platform for estimating technical potential and developing renewable energy supply curves, initially developed for wind and solar technologies. The model evaluates deployment constraints, considering land use, environmental, and cultural factors, and estimates the distance to existing grid features to connect future plants (Maclaurin et al., 2021). A pressing deficiency in the reV model, however, is representation of geothermal electricity generation technologies. To address this gap, we developed a novel geothermal generation module for reV that allows for representation and analysis at the same level of detail as other renewable technologies. This paper describes our process for evaluating data sources for the modeling, and presents five preliminary reV geothermal results. More specifically, we present two sets of resource data that represent upper and lower bounds for geothermal potential. We then present several sensitivity runs using the upper bound resource data; the results are encouraging that levelized cost of electricity (LCOE) can be reduced by optimizing the location and estimated capacity of the spatially diverse geothermal resource while considering the distance to existing grid infrastructure. Our preliminary supply curves and levelized cost of electricity (LCOE) results should be considered with care due to the highly uncertainty in geothermal resource potential data. We present median LCOE values for the conterminous U.S. for five scenarios: four hydrothermal (3.5km depth) and one EGS (4.5km depth). The capital and operating costs for each respective technology are modeled. We also compare results using two different resource data sources.

exclusions↗

Development of a Geothermal Module in reV: Quantifying the Geothermal Potential While Accounting for the Geospatial Intersection of the Grid Infrastructure and Land Use Characteristics: Preprint

The Renewable Energy Potential (reV) model is a geospatial platform for estimating technical potential and developing renewable energy supply curves, initially developed for wind and solar technologies. The model evaluates deployment constraints, considering land use, environmental, and cultural factors, and estimates the distance to existing grid features to connect future plants (Maclaurin et al., 2021). A pressing deficiency in the reV model, however, is representation of geothermal electricity generation technologies. To address this gap, we developed a novel geothermal generation module for reV that allows for representation and analysis at the same level of detail as other renewable technologies. This paper describes our process for evaluating data sources for the modeling, and presents five preliminary reV geothermal results. More specifically, we present two sets of resource data that represent upper and lower bounds for geothermal potential. We then present several sensitivity runs using the upper bound resource data; the results are encouraging that levelized cost of electricity (LCOE) can be reduced by optimizing the location and estimated capacity of the spatially diverse geothermal resource while considering the distance to existing grid infrastructure. Our preliminary supply curves and levelized cost of electricity (LCOE) results should be considered with care due to the highly uncertainty in geothermal resource potential data. We present median LCOE values for the conterminous U.S. for five scenarios: four hydrothermal (3.5km depth) and one EGS (4.5km depth). The capital and operating costs for each respective technology are modeled. We also compare results using two different resource data sources.

exclusions↗

A Generic Biogeochemical Module for Earth System Models: Next Generation BioGeoChemical Module (NGBGC), Version 1.0

Physical and biogeochemical processes regulate soil carbon dynamics and CO2 flux to and from atmosphere, influencing global climate changes. Integration of these processes into earth system models (e.g., community land models (CLM)), however, currently faces three major challenges: 1) extensive efforts are required to modify modeling structures and to rewrite computer programs to incorporate new or updated processes as new knowledge is being generated, 2) computational cost is prohibitively expensive to simulate biogeochemical processes in land models due to large variations in the rates of biogeochemical processes, and 3) various mathematical representations of biogeochemical processes exist to incorporate different aspects of fundamental mechanisms, but systematic evaluation of the different mathematical representations is difficult, if not possible. To address these challenges, we propose a new computational framework to easily incorporate physical and biogeochemical processes into land models. The new framework consists of a new biogeochemical module with a generic algorithm and reaction database so that new and updated processes can be incorporated into land models without the need to manually set up the ordinary differential equations to be solved numerically. The reaction database consists of processes of nutrient flow through the terrestrial ecosystems in plants, litter and soil. This framework facilitates effective comparison studies of biogeochemical cycles in an ecosystem using different conceptual models under the same land modeling framework. The approach was first implemented in CLM and benchmarked against simulations from the original CLM-CN code. A case study was then provided to demonstrate the advantages of using the new approach to incorporate a phosphorus cycle into the CLM model. To our knowledge, the phosphorus-incorporated CLM is a new model that can be used to simulate phosphorus limitation on the productivity of terrestrial ecosystems.

Fang, Yilin↗

Self-Amplifying Feedbacks Accelerate Greening and Warming of the Arctic

Increased greening, higher vegetation productivity, and shrubification have been observed in Arctic tundra in response to recent warming. Such changes have affected the near-surface climate through opposing biogeophysical feedbacks (BF) associated with changes to albedo and evapotranspiration. However, the likely spatiotemporal variations of BF to future climate change and the consequences for Arctic vegetation and ecology have not been robustly quantified. In this paper, we apply a regional Earth system model (RCA-GUESS) interactively coupling atmospheric dynamics to land vegetation response in three potential 21st-century radiative forcing simulations for the Arctic. We find that BF, dominated by albedo-mediated warming in early spring and evapotranspiration-mediated cooling in summer, have the potential to amplify or modulate local warming and enhance summer precipitation over land. Finally, the magnitude of these effects depends on radiative forcing and subsequent ecosystem responses. Thus, it is important to account for BF when assessing future Arctic climate change and its ecosystem impacts.

54 ENVIRONMENTAL SCIENCES↗

CLM5 Simulations of Soil Moisture and Gross Primary Productivity for CONUS at 0.125 degrees

This dataset provides 0.125-degree gridded simulations of soil moisture and gross primary productivity (GPP) for the Contiguous United States (CONUS), generated using the Community Land Model version 5 (CLM5) with the biogeochemistry module enabled. The data covers a historical baseline (1980-2015) and mid-century future projections (2020-2055). Future projections are organized into two sets of scenarios to distinguish the impacts of different drivers: (1) Atmospheric Only (ATM): These scenarios apply future atmospheric forcings while holding land use and land cover (LULC) at historical baseline levels. The atmospheric forcings represent moderately versus severely hotter/drier atmospheric conditions (dynamically downscaled perturbed thermodynamics simulations based on CMIP6 SSP245 and SSP585 warming signals), each with cooler versus hotter Earth System Model temperature sensitivity instantiations. These scenarios are identified in the folder names as rcp45_cooler_near, rcp45_hotter_near, rcp85_cooler_near, and rcp85_hotter_near. (2) Coupled Atmospheric and Land-Use (LAND+ATM): These scenarios apply future atmospheric forcing together with future LULC by pairing atmospheric pathways with lower versus higher population/economic growth scenarios representing Shared Socioeconomic Pathways 3 and 5 (SSP3 and SSP5). These scenarios are identified in the file names as ssp3_rcp45_cooler_near, ssp3_rcp45_hotter_near, ssp5_rcp85_cooler_near, and ssp5_rcp85_hotter_near. Please refer to the "README_first.md" file for detailed information on file structure, variables, units, and data formats.

drought↗

CLM5 Simulations of Soil Moisture and Grain Carbon for CONUS at 0.125 degrees

This dataset provides 0.125° gridded simulations of soil moisture and crop grain carbon for the Contiguous United States (CONUS), generated using the Community Land Model version 5 (CLM5) with the biogeochemistry module enabled. The data covers a historical baseline (1980–2015) and mid-century future projections (2020–2055). Future projections are organized into two sets of scenarios to distinguish the impacts of different drivers: (1) Atmospheric Only (ATM-only): These scenarios apply future atmospheric forcings while holding land use and land cover change (LULCC) at historical baseline levels. The atmospheric forcings represent moderately versus severely hotter/drier atmospheric conditions (dynamically downscaled perturbed thermodynamics simulations based on CMIP6 SSP245 and SSP585 warming signals), each with cooler versus hotter Earth System Model temperature sensitivity instantiations. These scenarios are identified in the file names as atm45cooler, atm45hotter, atm85cooler, and atm85hotter. (2) Coupled Atmospheric and Land-Use (LAND+ATM): These scenarios apply future atmospheric forcing together with future LULCC by pairing atmospheric pathways with lower versus higher population/economic growth scenarios representing Shared Socioeconomic Pathways 3 and 5 (SSP3 and SSP5). These scenarios are identified in the file names as atm45cooler_ssp3, atm45hotter_ssp3, atm45cooler_ssp5, atm45hotter_ssp5, atm85cooler_ssp3, atm85hotter_ssp3, atm85cooler_ssp5, and atm85hotter_ssp5. Please refer to the README file for detailed information on file structure, variables, units, and data formats.

Yao, Lili [Pacific Northwest National Laboratory] ↗

An Integrative Model for Soil Biogeochemistry and Methane Processes: I. Model Structure and Sensitivity Analysis

Abstract Environmental changes are anticipated to generate substantial impacts on carbon cycling in peatlands, affecting terrestrial‐climate feedbacks. Understanding how peatland methane (CH 4 ) fluxes respond to these changing environments is critical for predicting the magnitude of feedbacks from peatlands to global climate change. To improve predictions of CH 4 fluxes in response to changes such as elevated atmospheric CO 2 concentrations and warming, it is essential for Earth system models to include increased realism to simulate CH 4 processes in a more mechanistic way. To address this need, we incorporated a new microbial‐functional group‐based CH 4 module into the Energy Exascale Earth System land model (ELM) and tested it with multiple observational data sets at an ombrotrophic peatland bog in northern Minnesota. The model is able to simulate observed land surface CH 4 fluxes and fundamental mechanisms contributing to these throughout the soil profile. The model reproduced the observed vertical distributions of dissolved organic carbon and acetate concentrations. The seasonality of acetoclastic and hydrogenotrophic methanogenesis—two key processes for CH 4 production—and CH 4 concentration along the soil profile were accurately simulated. Meanwhile, the model estimated that plant‐mediated transport, diffusion, and ebullition contributed to ∼23.5%, 15.0%, and 61.5% of CH 4 transport, respectively. A parameter sensitivity analysis showed that CH 4 substrate and CH 4 production were the most critical mechanisms regulating temporal patterns of surface CH 4 fluxes both under ambient conditions and warming treatments. This knowledge will be used to improve Earth system model predictions of these high‐carbon ecosystems from plot to regional scales.

58 GEOSCIENCES↗

Functional-type modeling approach and data-driven parameterization of methane emissions in wetlands (Final Technical Science Report)

Our goals are to improve understanding and quantitative representation of the multiple processes that affect methane emissions at a high (patch level, vertically detailed) spatial resolution, and translate this understanding to improved modeling capability of coastal wetland fluxes using the E3SM Land Model (ELM v1) wetland CH4 biogeochemistry module. We propose an experimental approach to identify and parameterize uncertainties in ELM. Understanding of methane emissions can be improved along three conceptual axes: (i) horizontal (ecohydrological patch resolution), (ii) vertical (through the depth of the soil column), and (iii) process level (e.g., resolving microbial pathways, vegetation specific transport pathways). Along each of the three axes, we will characterize, quantify, and model, the key ecological, hydrological, and meteorological controls of methane (CH4) flux heterogeneity in four model coastal wetlands.

54 ENVIRONMENTAL SCIENCES↗

Atmospheric River Frequency-Category Characteristics Shape U.S. West Coast Runoff

Abstractrunoff response to atmospheric rivers (ARs) over the U.S. West Coast. We focused on runoff time series variations impacted by AR characteristics (e.g., category and frequency) and land preconditions during Northern Hemisphere cool seasons in the period of 1940–2023. Results show that high-category ARs significantly increase local runoff with higher hourly precipitation rates leading to a greater incremental rate and peak runoff. Extreme runoff increases greatly with the AR category with an increase rate up to 12.5 times stronger than non-extreme runoff. Besides the AR category, land preconditions such as soil moisture and snowpack also play crucial roles in modulating runoff response. We found that runoff induced by weak-category ARs is more sensitive to land preconditions than high-category ARs, with high peak runoff occurring when soil is nearly saturated. Additionally, more than 50% of high-peak-runoff events in snow-covered grid cells are associated with rain-on-snow events particularly for the events associated with weaker ARs. Regression analysis reveals that AR precipitation and land preconditions jointly influence runoff, emphasizing the importance of including soil moisture and snowpack levels in AR impact assessments. The study also highlights the intensified runoff response to back-to-back ARs with short intervals, which may become more frequent with climate warming, posing increased flood risks via facilitating wet soil conditions. Our findings have significant implications for AR risk predictions and the development of prediction models for AR-induced runoff.

54 ENVIRONMENTAL SCIENCES↗

The Impact of Surface Heterogeneities and Land‐Atmosphere Interactions on Shallow Clouds Over ARM SGP Site

Abstract Continental shallow clouds are an important component of the land‐atmosphere coupled climate system because of their role in modulating energy and water budgets. The parameterization of these clouds in climate models presents a significant challenge. We evaluate the potential impact of subgrid‐scale (for climate models) land‐atmosphere interactions on shallow clouds using nested large‐eddy simulations (LESs). We compare LESs that allow for land‐atmosphere interactions to ones that artificially suppress all or part of them by smoothing out surface heterogeneities in surface heat, moisture and radiation fluxes within the domain. The LES domains are coupled to an interactive land surface model and nested inside a mesoscale domain. Three summertime shallow convection cases over the Department of Energy Atmospheric Radiation Measurement Facility's Southern Great Plains site are examined. A consistent increase in cloud water content is observed in all cases when surface heterogeneities and the land‐atmosphere interactions they induce in the LES domain are removed. By comparing experiments where only surface flux heterogeneities induced by cloud shadows are removed to ones where all surface flux heterogeneities are removed, we find that cloud shading‐induced surface heterogeneities can have a larger impact on shallow convection than static land surface heterogeneities in our cases. Furthermore, the impact of cloud shading on cloud water content and cloud size is found to vary significantly with the solar incidence angle. Our results suggest that the impact of cloud shadows needs to be considered when parameterizing land‐atmosphere interactions in the presence of shallow clouds for regional or global climate models.

54 ENVIRONMENTAL SCIENCES↗

Modular Undersea Compressed Air Energy Storage (UCAES) System

This project has been devoted to the design, optimization, and cost analysis of a unique power plant with integral energy storage. The proposed facility combines a novel underwater compressed air energy storage (UCAES) system with a customized gas turbine generator, providing exceptional power management and overall efficiency. Unlike conventional CAES, opportunities for underwater storage are plentiful and proximal to the power grid. The UCAES system provides coastal and island communities a practical means for managing the volatility of large-scale wind and solar power resources. The result is higher renewable energy absorption and improved electrical reliability with reduced fossil fuel consumption. The UCAES power plant is composed of three major subsystems: The underwater air containment system (ACS), the air transport pipe (ATP), and the land-based power conversion system (PCS). The underwater ACS is made up of modular concrete shell units, structurally optimized for minimal material usage while employing conventional production methods and equipment. Each shell is designed to receive and control loose fill or gravel, serving as the ballast. The static nature of the final structures make them an asset to marine habitats and includes features intended to permit safe and cost-effective deployment. The ATP Connects the ACS modules to each other and to the on-land power conversion system and utilizes high density polyethylene (HDPE) pipe for low cost and long life. The PCS Houses the turbine-generator ‘expander modules’, with peak capacity of 12.3 MWe each, engineered from existing gas turbine equipment and includes electrically driven commercial 3-stage intercooled centrifugal compressors, each nominally drawing 6.6 MWe when matching the turbine flow requirements. The subsystems listed above are designed with the intent to serve as building-blocks to achieve a peak power output rating in the 40 to 120 MWe range, with 0.25 to 4 hours of energy storage capacity. The modular facility with integral energy storage provides some remarkable transient maneuvers and load-following features unachievable by competing technologies. The system can operate as a dispatchable power plant with a fuel-to-electric efficiency over 41%; substantially better that the average existing Hawaiian peak power generation assets. Optimal efficiency can be maintained while load-following due to modular PCS design and is operable with a range of liquid or gaseous fuels while meeting the most stringent California (CARB) emission standards. The system can operate as a peaking energy plant in discharge mode. Power ramp-up equivalent to 215% of continuous load rating within 1 second accomplished by simply turning off the electric compressor(s). Contrarily, the system can offer energy absorption during periods of grid surplus generation. The electric compressors may be sequenced on to absorb power within seconds. More moderate transitions are easily achieved with standard compressor control functions. The system offers unique features as compared to energy storage systems. ‘Round-trip efficiency’, as calculated by industry standard methods, is in the 90% range. The PCS equipment has a mean-time between overhauls of 80,000 hours, with maintenance costs of less than $0.005/kW-hr of electricity delivered. The underwater ACS structures and piping employ materials and designs specified to achieve a 75 year life. With the underwater containment modules qualified as a marine habitat, there would be no decommissioning costs. In conjunction with the engineering work invested in the design of the UCAES power plant, Brayton Energy has employed a team of manufacturing specialists, marine construction engineers, and power industry experts to create a comprehensive economic model that captures the many site-related variables and configuration options. The cost results and methodology have been validated by suppliers, engineers, and deployment specialists through a detailed case study on Hawaii. While creation of the parametric cost model was based on inputs specific to Hawaii, the proposed construction and deployment steps were chosen to be general enough to allow extrapolation across locations world-wide. Analysis of the proposed system shows it to be a viable option and addresses the principal challenges described by the Department of Energy by offering competitive costs, validated safety and reliability, consideration of the regulatory environment, and utilization of industry accepted practices and equipment. The UCAES system is recommended for immediate consideration in Hawaii. Estimation of time to complete planning, design, and construction of the facility is anticipated to take 3 to 5 years. Other coastal and island communities world-wide should realize similar benefits; as the results presented in this report are considered generally transferable to other locations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

What Do Experienced Water Managers Think of Water Resources of Our Nation and Its Management Infrastructure?

This article represents the second report by an ASCE Task Committee “Infrastructure Impacts of Landscape-driven Weather Change” under the ASCE Watershed Management Technical Committee and the ASCE Hydroclimate Technical Committee. Herein, the ‘infrastructure impacts” are referred to as infrastructure-sensitive changes in weather and climate patterns (extremes and non-extremes) that are modulated, among other factors, by changes in landscape, land use and land cover change. In this first report, the article argued for explicitly considering the well-established feedbacks triggered by infrastructure systems to the land-atmosphere system via landscape change. In this report by the ASCE Task Committee (TC), we present the results of this ASCE TC’s survey of a cross section of experienced water managers using a set of carefully crafted questions. These questions covered water resources management, infrastructure resiliency and recommendations for inclusion in education and curriculum. We describe here the specifics of the survey and the results obtained in the form of statistical averages on the ‘perception’ of these managers. Finally, we discuss what these ‘perception’ averages may indicate to the ASCE TC and community as a whole for stewardship of the civil engineering profession. The survey and the responses gathered are not exhaustive nor do they represent the ASCE-endorsed viewpoint. However, the survey provides a critical first step to developing the framework of a research and education plan for ASCE. Given the Water Resources Reform and Development Act passed in 2014, we must now take into account the perceived concerns of the water management community.

54 ENVIRONMENTAL SCIENCES↗

ARM Aerial Facility (AAF) Navigation Data

Aircraft velocity and position data from takeoff to landing. The ARM Aerial Facility (AAF) Differential Survey Module (DSM) 10Hz data is used if it is available, otherwise data from the AIMMS-20 system is used.

54 ENVIRONMENTAL SCIENCES↗

Revolution…Now The Future Arrives for Five Clean Energy Technologies – 2015 Update

In 2013, the U.S. Department of Energy (DOE) released the Revolution Now report, highlighting four transformational technologies: land-based wind power, silicon photovoltaic (PV) solar modules, light-emitting diodes (LEDs), and electric vehicles (EVs). That study and its 2014 update showed how dramatic reductions in cost are driving a surge in consumer, industrial, and commercial adoption for these clean energy technologies—as well as yearly progress. In addition to presenting the continued progress made over the last year in these areas, this year’s update goes further. Two separate sections now cover large, central, utility-scale PV plants and smaller, rooftop, distributed PV systems to highlight how both have achieved significant deployment nationwide, and have done so through different innovations, such as easier access to capital for utility-scale PV and reductions of non-hardware costs and third-party ownership for distributed PV. Along with these core technologies

Revolution, future, clean, energy, wind, pv, solar↗

Machine Learning Driven Sensitivity Analysis of E3SM Land Model Parameters for Wetland Methane Emissions

Methane (CH 4 ) is globally the second most critical greenhouse gas after carbon dioxide, contributing to 16%–25% of the observed atmospheric warming. Wetlands are the primary natural source of methane emissions globally. However, wetland methane emission estimates from biogeochemistry models contain considerable uncertainty. One of the main sources of this uncertainty arises from the numerous uncertain model parameters within various physical, biological, and chemical processes that influence methane production, oxidation, and transport. Sensitivity Analysis (SA) can help identify critical parameters for methane emission and achieve reduced biases and uncertainties in future projections. This study performs SA for 19 selected parameters responsible for critical biogeochemical processes in the methane module of the Energy Exascale Earth System Model (E3SM) land model (ELM). The impact of these parameters on various CH 4 fluxes is examined at 14 FLUXNET- CH 4 sites with diverse vegetation types. Given the extensive number of model simulations needed for global variance-based SA, we employ a machine learning (ML) algorithm to emulate the complex behavior of ELM methane biogeochemistry. We found that parameters linked to CH 4 production and diffusion generally present the highest sensitivities despite apparent seasonal variation. Comparing simulated emissions from perturbed parameter sets against FLUXNET-CH 4 observations revealed that better performances can be achieved at each site compared to the default parameter values. This presents a scope for further improving simulated emissions using parameter calibration with advanced optimization techniques.

54 ENVIRONMENTAL SCIENCES↗

Warming Pattern over the Northern Hemisphere Midlatitudes in Boreal Summer 1979–2020

Abstract Significant surface air temperature warming during summer 1979–2020 is not uniformly distributed in the northern midlatitudes over land but rather is confined to several longitudinal sectors including Europe, central Siberia and Mongolia, and both coasts of North America. These hot spots are accompanied by a chain of high pressure ridges from an anomalous, circumglobal Rossby wave train in the upper troposphere. From reanalysis data and several baseline experiments from phase 6 of the Coupled Model Intercomparison Project (CMIP6), we find that the circulation trend pattern is associated with fluctuations of the Atlantic multidecadal variability (AMV) and the interdecadal Pacific oscillation. The phase shift of AMV in the 1990s is particularly noteworthy for accelerating warming averaged over the northern midlatitude land. The amplitude of the observed trend in both surface air temperature and the upper-level geopotential height generally falls beyond the range of multidecadal trends simulated by the CMIP6 preindustrial control runs, supporting the likelihood that anthropogenic forcing played a critical role in the observed trend. On the other hand, the fidelity of the simulated low-frequency modes of variability and their teleconnections, especially on multidecadal time scales, is difficult to assess because of the relatively short observational records. Our mechanistic modeling results indicate that synoptic eddy–mean flow interaction is a key to the formation of the anomalous wave train but how the multidecadal modes can modulate the synoptic eddies through atmosphere–ocean and atmosphere–land interactions remains poorly understood. This gap in our knowledge makes it challenging to quantify the roles of the low-frequency modes and external forcings in causing the observed multidecadal trends.

54 ENVIRONMENTAL SCIENCES↗

Incorporating Microtopography in a Land Surface Model and Quantifying the Effect on the Carbon Cycle

Abstract Northern peatlands are a terrestrial carbon store, with an annual sink of 0.1 Pg C yr −1 and a total storage estimate of 547 Pg C. Northern peatlands are also major contributors of atmospheric methane. Most land surface models do not accurately represent peatland carbon emissions, partly because they do not represent the hydrologic cycle and/or microtopography adequately. Interactions between water table depth and microtopography in peatlands influence decomposition and modulate CO 2 and CH 4 fluxes. A modified version of the land surface component of the Energy Exascale Earth System Model, was recently created to represent the microtopography and hydrology of a raised dome bog in northern Minnesota, USA. In this study, three microtopographic parameters are analyzed in the modified version: hummock height, hummock‐hollow spacing, and percent hollow. Terrestrial laser scanning observations are used to set uncertainty bounds for these parameters. Our model experiment results suggest that carbon‐related quantities of interest (QOI) were typically the most sensitive to hummock height, and those QOI (especially net ecosystem exchange, NEE) were sensitive to interactions between parameters. Furthermore, NEE was most relatively influenced by microtopographic parameters in the model, varying by 35%. We found that increasing hummock height resulted in more C being stored in plant tissue and less in soil organic matter. This coincided with decreases in Sphagnum and increases in Picea and shrub net primary production. These results suggest that future studies may consider extending prognostic capabilities of carbon cycling by incorporating hummock hollow microtopography into earth system models.

58 GEOSCIENCES↗