Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Flight test results for the Digital Integrated Automatic Landing Systems (DIALS): A modern control full-state feedback design

The Digital Integrated Automatic Landing System (DIALS) is discussed. The DIALS is a modern control theory design performing all the maneuver modes associated with current autoland systems: localizer capture and track, glideslope capture and track, decrab, and flare. The DIALS is an integrated full-state feedback system which was designed using direct-digital methods. The DIALS uses standard aircraft sensors and the digital Microwave Landing System (MLS) signals as measurements. It consists of separately designed longitudinal and lateral channels although some cross-coupling variables are fed between channels for improved state estimates and trajectory commands. The DIALS was implemented within the 16-bit fixed-point flight computers of the ATOPS research aircraft, a small twin jet commercial transport outfitted with a second research cockpit and a fly-by-wire system. The DIALS became the first modern control theory design to be successfully flight tested on a commercial-type aircraft. Flight tests were conducted in late 1981 using a wide coverage MLS on Runway 22 at Wallops Flight Center. All the modes were exercised including the capture and track of steep glidescopes up to 5 degrees.

Hueschen, R. M.↗
NASA NTRS2008

Multi-Terrain Earth Landing Systems Applicable for Manned Space Capsules

A key element of the President's Vision for Space Exploration is the development of a new space transportation system to replace Shuttle that will enable manned exploration of the moon, Mars, and beyond. NASA has tasked the Constellation Program with the development of this architecture, which includes the Ares launch vehicle and Orion manned spacecraft. The Orion spacecraft must carry six astronauts and its primary structure should be reusable, if practical. These requirements led the Constellation Program to consider a baseline land landing on return to earth. To assess the landing system options for Orion, a review of current operational parachute landing systems such as those used for the F-111 escape module and the Soyuz is performed. In particular, landing systems with airbags and retrorockets that would enable reusability of the Orion capsule are investigated. In addition, Apollo tests and analyses conducted in the 1960's for both water and land landings are reviewed. Finally, tests and dynamic finite element simulations to understand land landings for the Orion spacecraft are also presented.

Fasanella, Edwin L.↗
NASA NTRS2008

Multi-Terrain Earth Landing Systems Applicable for Manned Space Capsules

A key element of the President's Vision for Space Exploration is the development of a new space transportation system to replace the Shuttle that will enable manned exploration of the moon, Mars, and beyond. NASA has tasked the Constellation Program with the development of this architecture, which includes the Ares launch vehicle and Orion manned spacecraft. The Orion spacecraft must carry six astronauts and its primary structure should be reusable, if practical. These requirements led the Constellation Program to consider a baseline land landing on return to earth. To assess the landing system options for Orion, a review of current operational parachute landing systems such as those used for the F-111 escape module and the Soyuz is performed. In particular, landing systems with airbags and retrorockets that would enable reusability of the Orion capsule are investigated. In addition, Apollo tests and analyses conducted in the 1960's for both water and land landings are reviewed. Finally, tests and dynamic finite element simulations to understand land landings for the Orion spacecraft are also presented.

Fasanella, Edwin L.↗
NASA NTRS2009

Constellation Program (CxP) Crew Exploration Vehicle (CEV) Project Integrated Landing System

Crew Exploration Vehicle (CEV) Chief Engineer requested a risk comparison of the Integrated Landing System design developed by NASA and the design developed by Contractor- referred to as the LM 604 baseline. Based on the results of this risk comparison, the CEV Chief engineer requested that the NESC evaluate identified risks and develop strategies for their reduction or mitigation. The assessment progressed in two phases. A brief Phase I analysis was performed by the Water versus Land-Landing Team to compare the CEV Integrated Landing System proposed by the Contractor against the NASA TS-LRS001 baseline with respect to risk. A phase II effort examined the areas of critical importance to the overall landing risk, evaluating risk to the crew and to the CEV Crew Module (CM) during a nominal land-landing. The findings of the assessment are contained in this report.

Baker, John D.↗
NASA NTRSDate not supplied

Simulated Vision-based Approach and Landing System for Advanced Air Mobility

Advanced Air Mobility (AAM) aircraft require precision approach and landing systems (PALS) in several environments, such as urban, suburban, and rural. It is challenging to implement current state-of-the-art methods approved for automated approach and landing for AAM operations with challenges such as GPS degradation in urban environments and visual navigation aids like the glideslope and localizer being narrow and not allowing alternative incoming landing angles at vertiports. However, existing technology and systems, i.e., the instrument landing system (ILS) with glideslope and localizer indicators that use vision, IR, radar, or GPS methods, provide baseline perception and sensing requirements for AAM aircraft approach and landing. This paper focuses on vision-based PAL and computer vision feature correspondence methods to demonstrate a baseline navigation system while adhering to the Federal Aviation Administration requirements and regulations about heliport design (FAA AC 150/5390-2C), which is one of the closest references for vertiport requirements and regulations. The coplanar pose from orthography and scaling with iterations (COPOSIT) algorithm determines pose estimation, which feeds into an Extended Kalman filter that combines IMU with vision to create a vision-based approach and landing (VAL) sensor fusion navigation solution for GPS-denied environments. The VAL navigation solution provides promising simulation results for AAM PALS with Hough circle detection and feature correspondence, which demonstrate robustness to false positives. This paper incorporates moderately high- fidelity simulations with computer graphics rendering to show a distributed sensor network to track an AAM aircraft during approach and landing to compare with the aircraft’s onboard vision-based navigation solution.

distributed sensing↗
NASA NTRS1984

Flight tests of the Digital Integrated Automatic Landing System (DIALS)

The design, development, implementation and flight tests of the Digital Integrated Automatic Landing System (DIALS) are discussed. The system was implemented and flight tested on the Transport Systems Research Vehicle (TSRV), a Boeing 737-100. The design uses modern optimal control methods. The direct digital design obtained uses a 10 Hz rate for the sampling of sensors and the control commands. The basic structure of the control law consists of a steady state Kalman filter followed by a control gain matrix. The sensor information used includes Microwave Landing System (MLS) position, attitude, calibrated airspeed, and body accelerations. The phases of the final approach considered are localized and steep glideslope capture (which may be performed simultaneously or independently), localizer and glideslope track, crab/decrab, and flare to touchdown. The system can capture, track, and flare from conventional, as well as steep, glideslopes ranging from 2.5 deg to 5.5 deg. All of the modes of the control law including the Kalman filters were implemented on the TSRV flight computers which use fixed point arithmetic with 16 bit words. The implementation considerations are described as well as an analysis of the flight test results.

Halyo, N.↗
NASA NTRS1978

Automatic flight performance of a transport airplane on complex microwave landing system paths

During this demonstration the microwave landing system was utilized to provide the terminal configured vehicle B-737 airplane with guidance for automatic control on complex, curved descending paths with precision turns into short final approaches terminating in landing and roll-out, even when subjected to strong and gusty tail- and cross-wind components and severe wind shear. The data collected from more than fifty approach flights during the demonstration provided an opportunity to analyze airplane flight performance on a statistical basis rather than on a single flight record basis as is customarily done with limited data replication. Mean and standard deviation data are presented for approach flight path tracking parameters. In addition, the adverse wind conditions encountered during these flights are described using three-dimensional wind vector characteristics computed from the extensive on-board sensor data.

Walsh, T. M.↗
NASA NTRS1986

Implementation and flight tests for the Digital Integrated Automatic Landing System (DIALS). Part 2: Complete set of flight data

Five flight tests of the Digital Automated Landing System (DIALS) were conducted on the Advanced Transport Operating System (ATOPS) Transportation Research Vehicle (TSRV)--a modified Boeing 737 Aircraft for advanced controls and displays research. These flight tests were conducted at NASA's Wallops Flight Center using the Microwave Landing System (MLS) installation on Runway 22. This report is primarily a collection of data plots of all performance variables recorded for the entire five flight tests. A description and source of the performance variables is included. Performance variables include inertial data, air data, automatic control commands, control servo positions, sensor data, DIALS guidance and control parameters, and Kalman filter data. This data illustrates low overshoot captures of the localizer for intercept angles of 20 deg, 30 deg, 40 deg, and 50 deg intercept angles, and low overshoot captures of the glideslope slope for 3 deg, 4.5 deg, and 5 deg glideslopes. Flare maneuvers were successfully performed from the various glideslope angles and good decrab maneuvers were performed in crosswinds of 6 knots. In 18 to 20 knot crosswind conditions rudder limiting occurred which caused lateral drifting although heading alignment was achieved.

Hueschen, R. M.↗
NASA NTRS2013

Mars Science Laboratory Entry, Descent and Landing System Overview

The Mars Science Laboratory project recently places the Curiosity rove on the surface of Mars. With the success of the landing system, the performance envelope of entry, descent and landing capabilities has been extended over the previous state of the art. This paper will present an overview to the MSL entry, descent and landing system design and preliminary flight performance results.

MSL↗
NASA NTRS1975

Refinement and validation of two digital Microwave Landing System (MLS) theoretical models

Two digital microwave landing system theoretical models are considered which are generic models for the Doppler and scanning-beam frequency reference versions of the MLS. These models represent errors resulting from both system noise and discrete multipath. The data used for the validation effort were obtained from the Texas Instrument conventional scanning beam and the Hazeltine Doppler feasibility hardware versions of the MLS. Topics discussed include tape read software, time history plots, computation of power spectral density, smoothed power spectra, best-fit models, different equations for digital simulation, and discrete multipath errors.

Duff, W. G.↗
NASA NTRS1981

Helical helicopter approaches with microwave landing system guidance

It is desirable that the landing approach of helicopters and V/STOL aircraft into a congested airport equipped with a microwave landing system (MLS) can take place essentially independent of CTOL traffic. The helical approach has been proposed as one way to provide aircraft separation while requiring minimum airspace. A helical descent makes it possible for the helicopter to lose altitude in a confined airspace without descending along an excessively steep glide slope. This avoids helicopter handling problems which occur at slow airspeeds. Preliminary flight-test data are presented regarding the operational feasibility of the helical approach under IFR conditions where the primary guidance information is from an MLS.

Mcgee, L. A.↗
NASA NTRS1989

Crew procedures and workload of retrofit concepts for microwave landing system

Crew procedures and workload for Microwave Landing Systems (MLS) that could be retrofitted into existing transport aircraft were evaluated. Two MLS receiver concepts were developed. One is capable of capturing a runway centerline and the other is capable of capturing a segmented approach path. Crew procedures were identified and crew task analyses were performed using each concept. Crew workload comparisons were made between the MLS concepts and an ILS baseline using a task-timeline workload model. Workload indexes were obtained for each scenario. The results showed that workload was comparable to the ILS baseline for the MLS centerline capture concept, but significantly higher for the segmented path capture concept.

Summers, Leland G.↗
NASA NTRS1982

Fault tolerant navigation in a Microwave Landing System environment

This paper describes the failure detection and isolation performance of a sensor fault tolerant system for the NASA Terminal Configured Vehicle (TCV) research aircraft in a Microwave Landing System (MLS) environment. The objective of the fault tolerant system is to detect failures in navigation-aid instruments and on-board sensors and to provide reliable estimates for the aircraft states in the possible presence of these sensor malfunctions. Analytic redundancy, which exists between the various sensor outputs due to the aircraft point mass equations of motion, is used to identify sensor failures. State estimates are used by an automatic guidance and control system to land the aircraft along a prescribed path.

Caglayan, A. K.↗
NASA NTRS1980

Air traffic control using a microwave landing system

The performance of air traffic controllers using a simulated microwave landing system to control the landing of STOL aircraft is investigated. In a series of two experiments, controllers were asked to achieve a 60-sec separation between targets at the missed approach point when only two targets were on the simulated radar scope, and in the presence of 25 targets, with up to 10 on the screen at any one time. In both experiments, the presence of a ground wind is found to degrade separation performance, and an increased work load results in even greater separation variability, as the controllers did not have time to convert aircraft distances into times. In addition, curved courses are found to have an effect on performance. It is thus recommended that in order to create a practical air traffic control system with separation standards based on time, as in the MLS, controller work loads should be reduced and aircraft positions should be displayed with respect to time rather than distance.

Gershzohn, G.↗