Search NASA⌕ Search

SEARCH · Search NASA

Results for “LED phosphors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Cr3+ doped ZnGa2O4 far-red emission phosphor-in-glass: Toward high-power and color-stable plant growth LEDs with responds to all of phytochrome

Highlights: • A high-power and color-stable far-red emission phosphor-convertor LEDs is proposed. • The Cr{sup 3+} ion as the center of luminescence not only increase choice in plant lighting but also provides far-red light. • The ZGO:Cr{sup 3+}-PiG shows a quantum efficiency of ∼52.8%. • The high-power plant growth LEDs was fabricated, triggering providing broad spectral range for plant growth LEDs. - Abstract: In present work, a series of luminescent glass ceramic plates were prepared via phosphor-in-glass (PiG) technology, in which included the phosphor of ZnGa{sub 2}O{sub 4}:Cr{sup 3+} (ZGO:Cr{sup 3+}) and glass host with composition of 30SiO{sub 2}-30ZnO-22B{sub 2}O{sub 3}-12BaO-6Al{sub 2}O{sub 3} as matrix. The structure of ZnGa{sub 2}O{sub 4}:Cr{sup 3+}-based PiG (ZGO:Cr{sup 3+}-PiG) samples are characterized by powder X-ray diffraction, scanning electron microscope, and energy dispersive spectrometer mapping. These phosphors are found to be embedded in glass matrix without interfacial reaction. In addition, the ZGO:Cr{sup 3+}-PiG sample shows a quantum efficiency of ∼52.8% and its fluorescence intensity maintains 68.2% when temperature reaching 150 °C. Finally, high-power and color-stable far-red emission plant growth LEDs was fabricated by ZGO:Cr{sup 3+}-PiG and 400 nm near-UV LED chip, which spectra matches well the absorption of plant's photosynthetic pigments. More importantly, it responds to all of phytochrome, triggering providing broad spectral range for plant growth LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Spectral Properties and Thermal Quenching of Mn{sup 4+} Luminescence in Silicate Garnet Hosts CaY{sub 2}MgMAlSi{sub 2}O{sub 12} (M = Al, Ga, Sc)

Multi-component silicate garnet ceramics CaY{sub 2}MgMAlSi{sub 2}O{sub 12} comprising different cations M = Al, Ga or Sc in octahedral sites doped with Mn{sup 4+} ions have been synthesized and studied as novel red-emitting phosphors aiming at warm white pc-LED applications. All synthesized phosphors exhibit Mn{sup 4+} luminescence in rather deep red region, the shortest-wavelength spectrum of Mn{sup 4+} luminescence (peak wavelength at 668 nm) being obtained for the host with the largest cation M{sup 3+} = Sc{sup 3+} in the octahedral site. The effect of increasing the energy of the emitting Mn{sup 4+2}E level with the size of the host cation in octahedral sites is supposed to be the result of decrease of the covalence of the “Mn{sup 4+}-ligand” bonding with increase of the interionic Mn{sup 4+}–O{sup 2–} distance. All studied phosphors demonstrate rather poor thermal stability of Mn{sup 4+} photoluminescence with a thermal quenching temperature T{sub 1/2} below 200 K, the lowest value being observed for the host with M = Sc. As expected, the decrease of the energy of the O{sup 2–}–Mn{sup 4+} charge-transfer state is observed with the increase of the M{sup 3+} cation radius, i.e. with the increase of the O{sup 2–}–Mn{sup 4+} interionic distance. The thermal quenching temperature of Mn{sup 4+} luminescence in the studied phosphors correlates with the energy of the O{sup 2–}–Mn{sup 4+} charge transfer state which is supposed to serve as a quenching state for Mn{sup 4+} luminescence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Synthesis and photoluminescence properties of ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) red phosphor

Highlights: • The ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) red phosphors were synthesized. • Photoluminescence (PL) properties of ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) phosphors also were discussed. • ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) could be a potential red phosphor for NUV LEDs and displays. - Abstract: ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) oxyapatite phosphors have been synthesized via traditional solid-state methods X-ray powder diffraction (XRD) analysis confirmed the phase formation of ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) materials. The scanning electron microscope (SEM) image exhibited the irregular morphology of ALa{sub 9}(SiO{sub 4}){sub 6}O{sub 2}: Eu{sup 3+} (A = Li, Na) particles. The photoluminescence excitation (PLE) and emission (PL) spectra were investigated. The results showed that the phosphor could be efficiently excited by the near ultraviolet (NUV) light, and it exhibited red light emission. The calculated color coordinates lies in the red region. All the obtained results suggest that the prepared phosphors exhibit great potential application as red emitting phosphor for near ultraviolet white light emitting diodes (NUV WLEDs).

36 MATERIALS SCIENCE↗
DOE OSTI2013

Luminescence properties of a blue-emitting phosphor: (Sr{sub 1−x}Eu{sub x})Si{sub 9}Al{sub 19}ON{sub 31} (0<x≤1)

Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized at 1800 °C for 2 h under 1 MPa N{sub 2} by using the gas-pressure sintering method (GPS). The microstructure, photoluminescence (PL) properties of the prepared phosphors were investigated. Under the 290 nm excitation, broad PL emission bands with peak positions at 448–490 nm were detected. The concentration quenching was not observed owing to the large distance betweenEu{sup 2+} ions that made the nonradiative energy transfer between neighboring Eu{sup 2+} ions difficult. The blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation, respectively. The interesting PL results indicate that Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} has great potentials as a blue phosphor for white LEDs applications. - Graphical abstract: Sr{sub 0.7}Eu{sub 0.3}Si{sub 9}Al{sub 19}ON{sub 31} gives blue-emitting at 471 nm. Excitation spectrum is composed of five bands in the range of 250–450 nm, which are matching well with emission wavelength of UV LEDs. Display Omitted - Highlights: • Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized by gas-pressure sintering method. • The concentration quenching was not observed in this phosphor. • This blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. • The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Scalable Thin Light-Emitting Diode (LED) Light Sheet Platform

The goal of the Scalable Thin Light-Emitting Diode (LED) Light Sheet Platform project is to derisk the manufacturing scalability for a high chip count heterogeneous smart lighting platform, with the potential to enable significant energy savings through dynamic directional light control and custom. Specifically, the project derisks the scalability of a disruptive new computer controlled microassembly fabrication process SRI International is developing, to address fundamental cost barriers to mass production of high chip count systems. This is key for enabling mass adoption and thus maximum societal energy savings impact. The LED light sheet technology is a smart illumination platform that can be applied to lighting, signage, and display. It has features and a form factor similar to bendable or conformal OLED light sheets but uses more efficient LEDs with a remote phosphor layer that is very close to the LED to deliver a luminous efficacy that exceeds 125 lumen/Watt and enable > 50% Lighting Application Efficiency (LAE) energy savings. During Budget Period 1 (BP1), all of the BP1 milestones were successfully completed: (M2.0.1) Design demonstrator details that will meet the final project goals, (M6.1.1) Show lighting output model can predict illuminance, spatial, spectral distribution for specific light-sheet designs and use case, (M3.2.1) Automated loading supports 200 chip arrays, and (M3.3.1) Finish first interconnect process run for 200 chip array. The BP1 Go/No-Go Decision Point (G/NG 1) 200 chip demonstrator sample was in the process of final assembly and test at the end of BP1 on December 31, 2023. The objective was successfully achieved on January 16, 2024, when a wired 200-chip sample underwent confirmation testing that demonstrated a 93.75% first pass electrical yield that successfully exceeded the 75% first-pass electrical yield BP1 G/NG requirement. In addition, all 93.75% of the sample devices lit up, further demonstrating the ability to assemble and transfer small LED chips without damaging their functionality.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

Structural and photoluminescence investigations of Sm{sup 3+} doped BaY{sub 2}ZnO{sub 5} nanophosphors

Highlights: • BaY{sub 2(1−x)}Sm{sub 2x}ZnO{sub 5} nanophosphors have been synthesized via solution combustion. • The nanophosphors have been characterized by XRD, TEM and PL spectroscopy. • The crystal structure reveals influence of doping on lattice parameters. • This nanophosphor executes orange–red emission under near UV excitation. - Abstract: BaY{sub 2}ZnO{sub 5}:Sm{sup 3+} nanophosphor was successfully synthesized using solution combustion process. XRD and photoluminescence (PL) techniques were used to analyze the structural and photoluminescence properties. Morphological study of the thermally stable powder was carried out using transmission electron microscope (TEM). Rietveld refinement technique has been used to analyze the samples qualitatively as well as quantitatively. X-Ray diffraction analysis confirms that the highly crystalline single phased Sm{sup 3+} doped BaY{sub 2}ZnO{sub 5} nanophosphor crystallizes in orthorhombic lattice with Pbnm space group. The average particle size lies in the range 80–90 nm with spherical morphology. The photoluminescence excitation at 411 nm yields an intense orange–red emission centered at 610 nm due to {sup 4}G{sub 5/2}–{sup 6}H{sub 7/2} transition. The concentration dependent luminescent behavior of BaY{sub 2(1−x)}Sm{sub 2x}ZnO{sub 5} nanophosphor shows that the optimum concentration for best luminescence is 3 mol%. These results indicate that these nanophosphors find potential applications in the field of phosphor-converted white LED systems.

36 MATERIALS SCIENCE↗
DOE OSTI2016

BODIPY star-shaped molecules as solid state colour converters for visible light communications

In this paper, we study a family of solid-state, organic semiconductors for visible light communications. The star-shaped molecules have a boron-dipyrromethene (BODIPY) core with a range of side arm lengths which control the photophysical properties. The molecules emit red light with photoluminescence quantum yields ranging from 22% to 56%. Thin films of the most promising BODIPY molecules were used as a red colour converter for visible light communications. The film enabled colour conversion with a modulation bandwidth of 73 MHz, which is 16 times higher than that of a typical phosphor used in LED lighting systems. A data rate of 370 Mbit/s was demonstrated using On-Off keying modulation in a free space link with a distance of ∼15 cm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Simulation of Simple and Complex Gadolinium Molybdates by the Interatomic Potential Method

Crystals of ferroelectric‒ferroelastic gadolinium molybdate Gd{sub 2}(MoO{sub 4}){sub 3}, calcium molybdate CaMoO{sub 4}, and double sodium‒gadolinium molybdates of stoichiometric (Na{sub 1/2}Gd{sub 1/2}MoO{sub 4}) and cationdeficient (Na{sub 2/7}Gd{sub 4/7}MoO{sub 4}) compositions, which are used to design solid-state lasers, phosphors, and white LEDs, have been simulated by the interatomic potential method. Their structural, mechanical, and thermodynamic properties are calculated using a unified system of interatomic potentials and effective ion charges, which demonstrated transferability and made it possible not only to describe the existing experimental data but also to predict some important physical and thermodynamic properties of molybdate crystals. The influence of the deviation from stoichiometry and partial ordering of cations on sites in nonstoichiometric crystals on the properties and local structure of sodium‒gadolinium molybdates is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Temperature dependence of the luminescence of calcium-magnesium phosphate Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+}, a blue-emitting material for white light-emitting diodes

Graphical abstract: - Highlights: • Emission spectrum at 20 K confirms that Eu{sup 2+} ions occupy three sites. • Decay curves of three types of Eu{sup 2+} reflect the characteristics of energy transfer. • The Eu(I) emission is thermally quenched at 323 K. • Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} has good thermal stability. • Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} is a promising phosphor for near UV excited white LEDs. - Abstract: A blue-emitting phosphor Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} peaking at 450 nm was synthesized by a solid state reaction. The XRD patterns, luminescence properties, decay curves of samples as well as their thermal quenching and comparing the luminescence properties with that of commercial material were investigated. At 20 K, the emission spectrum exhibiting two distinct bands peaking at 437 and 473 nm with a shoulder peak at 510 nm can be attributed to the overlap of Eu(I), Eu(II) and Eu(III) emission bands. At 423 K the PL intensity decreases to 80% of the value at room temperature, and the emission wavelength shifts toward high energy. The derived activation energy indicates that the lowest energy level of the Eu{sup 2+} 4f{sup 6}5d{sup 1} state is well isolated from the host lattice conduction band. The PL spectra and chromaticity coordinates are close to those of BAM. Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} could be a potential candidate for near-UV excited white LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Realizing Wide-Gamut Human-Centric Display Lighting with K 3 AlP 3 O 9 N:Eu 2+

Abstract Computers, televisions, and smartphones are revolutionized by the invention of InGaN blue light-emitting diode (LED) backlighting. Yet, continual exposure to the intense blue LED emission from these modern displays can cause insomnia and mood disorders. Developing “human-centric” backlighting that uses a violet-emitting LED chip and a trichromatic phosphor mixture to generate color images is one approach that addresses this problem. The challenge is finding a blue-emitting phosphor that possesses a sufficiently small Stokes’ shift to efficiently down-convert violet LED light and produce a narrow blue emission. This work reports a new oxynitride phosphor that meets this demand. K 3 AlP 3 O 9 N:Eu 2+ exhibits an unexpectedly narrow (45 nm, 2206 cm -1 ), thermally robust, and efficient blue photoluminescence upon violet excitation. Computational modeling and temperature-dependent optical property measurements reveal that the narrow emission arises from a rare combination of preferential excitation and site-selective quenching. The resulting chromaticity coordinates of K 3 AlP 3 O 9 N:Eu 2+ lie closer to the vertex of the Rec. 2020 than a blue LED chip and provides access to ≈10% more colors than a commercial tablet when combined with commercial red- and green-emitting phosphors. Alongside the wide gamut, tuning the emission from the violet LED and phosphor blend can reduce blue light emissions to produce next-generation, human-centric displays.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Membrane-Induced Vanadium Crossover-Blocking Polybenzimidazole Copolymer with Exceptional Proton Selectivity

Broad deployment of redox flow batteries is hindered, in part, due to the lack of highly selective ion-exchange membranes with high proton conductivity. We report a post-functionalization strategy for polybenzimidazole copolymer (PBI-co) membranes by a reacting mixture of concentrated sulfuric and phosphoric acids that led to improved membrane selectivity while retaining high proton conductivity. Fourier-transform infrared spectroscopy confirmed successful sulfonation and protonation of benzimidazole functionalities. PBI-co exhibits a very high room-temperature proton conductivity of 0.138 S cm -1 , as measured by electrochemical impedance spectroscopy. PBI-co also demonstrates electromigration crossover mitigation under applied current densities up to 500 mA cm -2 , and voltage pulses up to 1.4 V, while also inhibiting diffusion-driven vanadium crossover for over 20 days. Single-cell vanadium flow battery testing on post-functionalized PBI-co further confirms state-of-the-art battery performance with an ~99.5% Coulombic efficiency at 100 mA cm -2 and an area-specific resistance of ~20 mO cm 2 lower than Nafion-212 membrane.

25 ENERGY STORAGE↗
DOE OSTI2017

The Influence of Phosphor and Binder Chemistry on the Aging Characteristics of Remote Phosphor Products

The influence of phosphor and binder layer chemistries on the lumen maintenance and color stability of remote phosphor disks were examined using wet high-temperature operational lifetime testing (WHTOL). As part of the experimental matrix, two different correlated color temperature (CCT) values, 2700 K and 5000 K, were studied and each had a different binder chemistry. The 2700 K samples used a urethane binder whereas the 5000 K samples used an acrylate binder. Experimental conditions were chosen to enable study of the binder and phosphor chemistries and to minimize photo-oxidation of the polycarbonate substrate. Under the more severe WHTOL conditions of 85°C and 85% relative humidity (RH), absorption in the binder layer significantly reduced luminous flux and produced a blue color shift. The milder WHTOL conditions of 75°C and 75% RH, resulted in chemical changes in the binder layer that may alter its index of refraction. As a result, lumen maintenance remained high, but a slight yellow shift was found. The aging of remote phosphor products provides insights into the impact of materials on the performance of phosphors in an LED lighting system.

Davis, Lynn↗
DOE OSTI2021

Green syntheses of stable and efficient organic dyes for organic hybrid light-emitting diodes

Organic hybrid light-emitting diodes (hybrid-LEDs) employ organic dyes as light converters on top of commercial blue inorganic LEDs, replacing incumbent inorganic phosphor light converters synthesized from rare-earth and/or toxic metallic elements to optimize device environmental sustainability. Here, we present two naturally derived organic dyes for hybrid-LEDs, highlighting stability and efficiency enhancement based on a novel “acceptor–acceptor” molecular design. This “acceptor–acceptor” skeleton comprises theobromine and thiadiazole, two electron-withdrawing groups that lower energy levels and suppress photooxidation. This differentiates these dyes from the widely adopted “donor–acceptor” skeleton, where photooxidation is facilitated by the presence of electron-donating units. Simultaneously, sidechains on organic dyes used to enhance solution processability, crucial for film transparency, introduce an additional photooxidation pathway. With this “acceptor–acceptor” skeleton, the destabilization from sidechains was offset by the stability enhancement from the electronic effects in the backbone. Additionally, when blended within an industrial polymer, poly(styrene-butadiene-styrene) (SBS), their enhanced solubility enables the formation of highly transparent films, crucial for reducing scattering loss in LEDs. Furthermore, resultant dye-SBS films achieved photoluminescence quantum yields (PLQYs) of around 90% under ambient conditions. Taking advantage of their transparency and solution processability, we fabricated a waveguide with this theobromine-dye-SBS composite, which was subsequentially assembled into an edge-lit LED device of no glare and enhanced aesthetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Composite materials having red emitting phosphors

A lighting apparatus includes an LED light source radiationally coupled to a composite material including a phosphor of formula I and a thermally conductive material dispersed in at least a portion of a binder material. The thermally conductive material includes a material selected from the group consisting of indium oxide, tin oxide, indium tin oxide, calcium oxide, barium oxide, strontium oxide, aluminum hydroxide, magnesium hydroxide, calcium hydroxide, barium hydroxide, strontium hydroxide, zinc hydroxide, aluminum phosphate, magnesium phosphate, calcium phosphate, barium phosphate, strontium phosphate, diamond, graphene, polyethylene nanofibers, carbon nanotubes, silver metal nanoparticles, copper metal nanoparticles, gold metal nanoparticles, aluminum metal nanoparticles, boron nitride, silicon nitride, an alkali metal halide, calcium fluoride, magnesium fluoride, a compound of formula II, and combinations thereof.

Porob, Digamber Gurudas↗
DOE OSTI2016

A single-phase Ba{sub 9}Lu{sub 2}Si{sub 6}O{sub 24}:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor with tunable full-color emission for NUV-based white LED applications

Highlights: • A single phase Ba{sub 9}Lu{sub 2}Si{sub 6}O{sub 24}:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor with full-color emission was obtained by solid-state reactions. • Eu{sup 2+}, Ce{sup 3+}, and Mn{sup 2+} acts as blue, green, and red luminescence centers, respectively. • The BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor shows a high quantum efficient of ∼62% and a good color stability. • Combining this single phosphor with a 395 nm NUV-chip, an ideal white LED with a high CRI of 85 and a CCT of 6300 K was obtained. - Abstract: We obtained a single phase BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor by solid-state reactions. Eu{sup 2+}, Ce{sup 3+}, and Mn{sup 2+} gives rise to the blue, green, and red emission, respectively. The Mn{sup 2+} red emission can be effectively enhanced via energy transfers from both Eu{sup 2+} and Ce{sup 3+}. Thus a tunable full color emission from 410 to 750 nm was realized in this single phosphor. The Eu{sup 2+} → Mn{sup 2+} energy transfer mechanism was investigated by the fluorescence decay curves. This single phosphor exhibits an efficient excitation band covering from 390 to 410 nm, which matches well with the emission light of the efficient NUV chips. The optimized BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor shows a high quantum efficient of ∼62% and a good color stability. When this single phosphor was combined with a 395 nm NUV-chip, an ideal white LED with a high color render index (CRI) of 85 and a correlated color temperature (CCT) of 6300 K was obtained. This demonstrates the promising application of the BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} single phosphor for the NUV-based white LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

From physics to fixtures to food: current and potential LED efficacy

Light-emitting diodes (LEDs) have enabled a historic increase in the conversion of electric energy to photons, but this is approaching a physical limit. The theoretical maximum efficiency occurs when all input energy is converted to energy in photosynthetic photons. Blue LEDs can be 93% efficient, phosphor-converted “whites” 76% efficient, and red LEDs 81% efficient. These improvements open new opportunities for horticultural lighting. Here we review (1) fundamental physics and efficiency of LEDs, (2) the current efficacy of LEDs, (3) the effect of spectral quality on crop yield, and (4) the potential efficacy of horticultural fixtures. Advances in the conversion of photons to yield can be achieved by optimization of spectral effects on plant morphology, which vary among species. Conversely, spectral effects on photosynthesis are remarkably similar across species, but the conventional definition of photosynthetic photons (400–700 nm) may need to be modified. The upper limit of LED fixture efficacy is determined by the LED package efficacy multiplied by four factors inherent to all fixtures: current droop, thermal droop, driver (power supply) inefficiencies, and optical losses. With current LED technology, the calculations indicate efficacy limits of 3.4 µmol J- 1 for white + red fixtures, and 4.1 µmol J -1 for blue + red fixtures. Adding optical protection from water and high humidity reduces these values by ~10%. We describe tradeoffs between peak efficacy and cost.

Agriculture↗
DOE OSTI2019

Narrow emitting red phosphors for improving pcLED efficacy

The objective of this Solid-State Lighting Advanced Technology R&D project was the development of a narrow-band red Eu 3+ -activated phosphor for blue-pumped, on-chip LED applications to improve pcLED efficacy up to 28%. We set out to develop novel and proprietary phosphor chemistry using standard inorganic chemistry methods to create phosphor materials with an efficient absorption of blue light (445-460 nm) and emission in a narrow bandwidth (less than 10 nm full-width-at-half-maximum observed) at target wavelengths in the red spectra. Furthermore, we intended that the narrow-band phosphors developed would be drop-in replacements for existing phosphor materials and will require no additional configuration of existing customer infrastructure, thereby enabling rapid adoption of these phosphors into LED lighting applications.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Understanding and controlling chromaticity shift in LED devices

Chromaticity shift in light-emitting diode (LED) devices arises from multiple mechanisms, and at least five different chromaticity shift modes (CSMs) have been identified to date. This paper focuses on the impacts of irreversible phosphor degradation as a cause of chromaticity shifts in LED devices. The nitride phosphors used to produce warm white LEDs are especially vulnerable to degradation due to thermal and chemical effects such as reactions with oxygen and water. As a result, LED devices utilizing these phosphors were found to undergo either a green shift or, less commonly, a red shift depending on the phosphor mix in the LED devices. These types of chromaticity shifts are classified as CSM-2 (green shift) and CSM-5 (red shift). This paper provides an overview of the kinetic processes responsible for green and red chromaticity shifts along with examples from accelerated stress testing of 6” downlights. Both CSMs appear to proceed through analogous mechanisms that are initiated at the surface of the phosphor. A green shift is produced by the surface oxidation of the nitride phosphor that changes the emission profile to lower wavelengths. As the surface oxidation reaction proceeds, reactant limitations slow the rate and bulk oxidation processes become more prevalent. We found that a red chromaticity shift arises from quenching of the green phosphor, also possibly due to surface reactions of oxygen, which shift the emission chromaticity in the red direction. In conclusion, we discuss the implications of these findings on projecting chromaticity.

Davis, Lynn↗