Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOOP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Loop-to-Loop Coupling

This report estimates inductively-coupled energy to a low-impedance load in a loop-to-loop arrangement. Both analytical models and full-wave numerical simulations are used and the resulting fields, coupled powers and energies are compared. The energies are simply estimated from the coupled powers through approximations to the energy theorem. The transmitter loop is taken to be either a circular geometry or a rectangular-loop (stripline-type) geometry that was used in an experimental setup. Simple magnetic field models are constructed and used to estimate the mutual inductance to the receiving loop, which is taken to be circular with one or several turns. Circuit elements are estimated and used to determine the coupled current and power (an equivalent antenna picture is also given). These results are compared to an electromagnetic simulation of the transmitter geometry. Simple approximate relations are also given to estimate coupled energy from the power. The effect of additional loads in the form of attached leads, forming transmission lines, are considered. The results are summarized in a set of susceptibility-type curves. Finally, we also consider drives to the cables themselves and the resulting common-to-differential mode currents in the load.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Linear phase demodulator including a phase locked loop with auxiliary feedback loop

A phase modulated wave that may have no carrier power is demodulated by a phase locked loop including a phase detector for deriving an A.C. data output signal having a magnitude and a phase indicative of the phase of the modulated wave. A feedback loop responsive to the data output signal restores power to the carrier frequency component to the loop. In one embodiment, the feedback loop includes a phase modulator responsive to the phase modulated wave and the data output signal. In a second embodiment, carrier frequency power is restored by differentiating the data output signal and supplying the differentiated signal to an input of a voltage controlled oscillator included in the phase locked loop.

Rippy, R. R.↗

Study of the post-flare loops on 29 July 1973. II - Physical parameters in the X-ray loops

We use the filter ratio method of analysis to determine spatially resolved values of plasma parameters in the X-ray emitting post-flare loop system which developed on 29 and 30 July 1973. We find that the loops were hotter and had higher plasma pressure at their tops than near their footpoints. The loop tops were at nearly the same temperature at different places 3 hr after the flare maximum and were also at nearly this same temperature 3 and 8 hr later. Variations in brightness transverse to the loops were due to variations in emission measure. We show by consideration of radiative losses alone that energy must have been added to the hottest part of the flare, at the tops of the loops, late in the decay phase of the flare.

Petrasso, R. D.↗

Transient brightenings of interconnecting loops. II - Dynamics of the brightened loops

Three different kinds of dynamic events related to interconnecting loops observed in soft X-rays aboard Skylab are discussed: (1) a newly born transequatorial loop that was either emerging from subphotospheric layers or gradually filled in with hot plasma; (2) large-scale twists of interconnecting loops which never relax, and often only form after the loop brightenings, and (3) three events where the loop that later interconnected two active regions had been visible long before one of the interconnecting regions was born. Several impacts this observation might have upon the understanding of the process of flux emergence are suggested.

Svestka, Z.↗

Loop Heat Pipes and Capillary Pumped Loops: An Applications Perspective

Capillary pumped loops (CPLS) and loop heat pipes (LHPS) are versatile two-phase heat transfer devices which have recently gained increasing acceptance in space applications. Both systems work based on the same principles and have very similar designs. Nevertheless, some differences exist in the construction of the evaporator and the hydro-accumulator, and these differences lead to very distinct operating characteristics for each loop. This paper presents comparisons of the two loops from an applications perspective, and addresses their impact on spacecraft design, integration, and test. Some technical challenges and issues for both loops are also addressed.

Butler, Dan↗

Power-Hardware-in-the-Loop Interfaces for Inverter-Based Microgrid Experiments Including Transitions

Microgrids continue to proliferate, particularly those that rely on inverter-based resources as the microgrid's voltage and frequency leader. Hardware-in-the-loop simulations can de-risk microgrid deployments, and therefore we need power-hardware-in-the-loop (PHIL) interfaces for grid-forming (GFM) inverters to enable simulations of seamless transitions between islanded and grid-connected operation. Such interfaces are particularly challenging when the inverters need to switch modes, i.e., between grid-following (GFL) and GFM as the microgrid transitions between grid-connected and islanded operation. This paper presents two PHIL interfaces for such microgrids and the preliminary experimental results.

experiments↗

Two-loop MHV form factors from the periodic Wilson loop

We discuss how to compute maximal-helicity-violating (MHV) form factors for the chiral part of the stress-tensor supermultiplet from periodic light-like polygon Wilson loops in planar $\mathcal{N}$ = 4 super Yang-Mills theory beyond the one-loop level. We show that the periodicity imposes path ordering on points on different edges, which explains the appearance of square roots coming from non-planar Feynman diagrams. Taking such diagrams into account, we provide the integrand of the two-loop n-particle MHV form factor, compute all diagrams, prove the cancellation of divergences and finally compute the two-loop 5-particle and 6-particle form factors as examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Assessment and Commissioning of Electrical Substation Grid Testbed with a Real-Time Simulator and Protective Relays/Power Meters in the Loop

Electrical utility substations are wired with intelligent electronic devices (IEDs), such as protective relays, power meters, and communication switches. Substation engineers commission these IEDs to assess the appropriate measurements for monitoring, control, power system protection, and communication applications. Like real electrical utility substations, complex electrical substation grid testbeds (ESGTs) need to be assessed for measuring current and voltage signals in monitoring, power system protection, control (synchro check), and communication applications that are limited by small measurement percentage errors. In the process of setting an ESGT with real-time simulators and IEDs in the loop, protective relays, power meters, and communication devices must be commissioned before running experiments. In this study, an ESGT with IEDs and distributed ledger technology was developed. The ESGT with a real-time simulator and IEDs in the loop was satisfactorily assessed and commissioned. The commissioning and problem-solving tasks of the testbed are described to define a method with flowcharts to assess possible trouble-shooting in ESGTs. This method was based on comparing the simulations versus IED measurements for the phase current and voltage magnitudes, three-phase phasor diagrams, breaker states, protective relay times with selectivity coordination at electrical faults, communication data points, and time-stamp sources.

Piesciorovsky, Emilio↗

Grafting Polymer Loops onto Functionalized Nanotubes: Monitoring Grafting and Loop Formation

Polystyrene functionalized at both ends (telechelic polymer) with epoxide groups (epoxy PS epoxy) was reacted with carboxylated multiwall carbon nanotubes (COOH MWNT) in solution in order to graft polymer chains at both ends onto the MWNT surface, forming loops. FT-IR spectroscopy was employed to monitor the formation of aromatic esters and to quantify the amount of telechelic grafted to the nanotube surface as a function of reaction time. When the samples were further annealed in the melt, an increase in the aromatic ester peak was observed, indicating that the unreacted chain ends further grafted to MWNT surfaces to form loops. By reacting the grafted nanotube samples further with monocarboxy terminated poly(4-methylstyrene) (COOH P4MS), the amount of epoxy PS epoxy that had only reacted at one end was determined. Reaction rate analysis indicates that that the grafting of epoxy PS epoxy to the nanotube surface is reaction controlled, as the FT-IR spectroscopy signal grows as a function of approximately t0.3. These studies exemplify how FT-IR spectroscopy can be used as a novel technique to quantify the amount of grafted polymer, grafting rate, and percent of difunctional polymers that form loops, and provide a method to create loop covered nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The four-loop six-gluon NMHV ratio function

We use the hexagon function bootstrap to compute the ratio function which characterizes the next-to-maximally-helicity-violating (NMHV) six-point amplitude in planar N=4 super-Yang-Mills theory at four loops. A powerful constraint comes from dual superconformal invariance, in the form of a Q¯ differential equation, which heavily constrains the first derivatives of the transcendental functions entering the ratio function. At four loops, it leaves only a 34-parameter space of functions. Constraints from the collinear limits, and from the multi-Regge limit at the leading-logarithmic (LL) and next-to-leading-logarithmic (NLL) order, suffice to fix these parameters and obtain a unique result. We test the result against multi-Regge predictions at NNLL and N 3 LL, and against predictions from the operator product expansion involving one and two flux-tube excitations; all cross-checks are satisfied. We study the analytical and numerical behavior of the parity-even and parity-odd parts on various lines and surfaces traversing the three-dimensional space of cross ratios. As part of this program, we characterize all irreducible hexagon functions through weight eight in terms of their coproduct. As a result, we also provide representations of the ratio function in particular kinematic regions in terms of multiple polylogarithms.

1/N expansion↗

Global bases for nonplanar loop integrands, generalized unitarity, and the double copy to all loop orders

We introduce a constructive method for defining a global loop-integrand basis for scattering amplitudes, encompassing both planar and nonplanar contributions. Our approach utilizes a graph-based framework to establish a well-defined, non-redundant basis of integrands. This basis, constructed from a chosen set of non-redundant graphs together with a selection of irreducible scalar products, provides clear insights into various physical properties of scattering amplitudes and proves useful in multiple contexts, such as on-shell Ward identities and manifesting gauge-choice independence. A key advantage of our integrand basis is its ability to streamline the generalized unitarity method. Specifically, we can directly read off the coefficients of basis elements without resorting to ansätze or solving linear equations. This novel approach allows us to lift generalized unitarity cuts — expressed as products of tree amplitudes — to loop-level integrands, facilitating the use of the tree-level double copy to generate complete gravitational integrands at any loop order. This method circumvents the difficulties in identifying complete higher-loop-order gauge-theory integrands that adhere to the color-kinematics duality. Additionally, our cut-based organization is well-suited for expansion in hard or soft limits, aiding in the exploration of ultraviolet or classical limits of scattering amplitudes.

Effective Field Theories↗

Oxygen Storage Properties of La 1– x Sr x FeO 3-δ for Chemical-Looping Reactions—An In Situ Neutron and Synchrotron X-ray Study

Oxygen storage materials (OSMs) provide lattice oxygen for a number of chemical-looping reactions including natural gas combustion and methane reforming. La 1–x Sr x FeO 3-δ has shown promise for use as an OSM in methane reforming reactions due to its high product selectivity, fast oxide diffusion, and cycle stability. Here, we investigate the structural evolution of the series La 1–x Sr x FeO 3-δ for x = 0, 1/3, 1/2, 2/3, and 1, using in situ synchrotron X-ray and neutron diffraction, as it is cycled under the conditions of a chemical-looping reactor (methane and oxygen atmospheres). In the compositions x = 1/3, 1/2, 2/3, and 1, we discover an envelope , or temperature range, of oxygen storage capacity (OSC), where oxygen can easily and reversibly be inserted and removed from the OSM. Our in situ X-ray and neutron diffraction results reveal that while samples with higher Sr contents had a higher OSC, those same samples suffered from slower reaction kinetics and some, such as the x = 1/2 and x = 2/3 compositions, had local variations in Sr content, which led to inhomogeneous regions with varying reaction rates. Therefore, we highlight the importance of in situ diffraction studies, and we propose that these measurements are required for the thorough evaluation of future candidate OSMs. Furthermore, we recommend La 2/3 Sr 1/3 FeO 3-δ as the optimal OSM in the series because its structure remains homogeneous throughout the reaction, and its OSC envelope is similar to that of the higher doped materials.

Taylor, Daniel D.↗

Domain Dynamics in Piezoresponse Force Microscopy: Quantitative Deconvolution and Hysteresis Loop Fine Structure

Domain dynamics in the Piezoresponse Force Spectroscopy (PFS) experiment is studied using the combination of local hysteresis loop acquisition with simultaneous domain imaging. The analytical theory for PFS signal from domain of arbitrary cross-section is developed and used for the analysis of experimental data on Pb(Zr,Ti)O3 polycrystalline films. The results suggest formation of oblate domain at early stage of the domain nucleation and growth, consistent with efficient screening of depolarization field within the material. The fine structure of the hysteresis loop is shown to be related to the observed jumps in the domain geometry during domain wall propagation (nanoscale Barkhausen jumps), indicative of strong domain-defect interactions.

36 MATERIALS SCIENCE↗

Higgs mechanism and loop-induced decays of a scalar into two Z bosons.

We discuss general on-shell couplings of a scalar with two Z bosons using an operator analysis. In addition to the operator that originated from the Higgs mechanism, two dimension-five operators, one CP even and one CP odd, are generated only at the loop level. Simple formulas are derived for the differential decay distributions when the Z pair subsequently decays into four leptons by computing the helicity amplitudes, from which it is shown the CP-odd operator merely induces a phase shift in the azimuthal angular distribution between the two decay planes of the Z bosons. We also investigate new physics scenarios giving rise to loop-induced decays of a scalar into the ZZ pair, and argue that the total decay width of such a scalar would be an order-of-magnitude smaller than that of a Higgs boson, should such decays be observed in the early running of the LHC. Therefore, the total decay width alone is a strong indicator of the Higgs nature, or the lack thereof, of a scalar resonance in ZZ final states. In addition, we study the possibility of using the azimuthal angular distribution to disentangle effects among all three operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Five-loop four-point integrand of N = 8 supergravity as a generalized double copy

Here, we use the recently developed generalized double-copy procedure to construct an integrand for the five-loop four-point amplitude of N = 8 supergravity. This construction starts from a naive double copy of the previously computed corresponding amplitude of N = 4 super-Yang-Mills theory. This is then systematically modified by adding contact terms generated in the context of the method of maximal unitarity cuts. For the simpler generalized cuts, whose corresponding contact terms tend to be the most complicated, we derive a set of formulas relating the contact contributions to the violations of the dual Jacobi identities in the relevant gauge-theory amplitudes. For more complex generalized unitarity cuts, which tend to have simpler contact terms associated with them, we use the method of maximal cuts more directly. The five-loop four-point integrand is a crucial ingredient towards future studies of ultraviolet properties of N = 8 supergravity at five loops and beyond. We further propose a nontrivial check of the consistency of the integrand, based on modern approaches for integrating over the loop momenta in the ultraviolet region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗