Search NASA⌕ Search

SEARCH · Search NASA

Results for “LORAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Design considerations for a LORAN-C timing receiver in a hostile signal to noise environment

The environment in which a LORAN-C Timing Receiver may function effectively depends to a large extent on the techniques utilized to insure that interfering signals within the pass band of the unit are neutralized. The baseline performance manually operated timing receivers is discussed and the basic design considerations and necessary parameters for an automatic unit utilizing today's technology are established. Actual performance data is presented comparing the results obtained from a present generation timing receiver against a new generation microprocessor controlled automatic acquisition receiver. The achievements possible in a wide range of signal to noise situations are demonstrated.

Porter, J. W.↗
NASA NTRS1981

A prototype interface unit for microprocessor based Loran-C receiver

An inexpensive data/command entry and CRT display system capable of alphanumeric and graphics moe operation and designed to operate in place of a separate ASCII terminal, is documented. The software to interface this unit to the 6502-based Loran C receiver is also described. The system simplifies receiver operations to a level typical of current avionics systems.

Novacki, S. M., III↗
NASA NTRS1982

A Loran-C prototype navigation receiver for general aviation

The design, fabrication and evaluation of a prototype Loran-C receiver is described. Hardware, and microcomputer programming for addition of area navigation capability are reported. The receiver is an envelope processor, offering simplicity of RF processor circuitry.

Lilley, R. W.↗
NASA NTRS1982

A prototype interface unit for microprocessor-based Loran-C receiver

A data/command entry ASCII keypad with a CRT display capable of alphanumeric and graphics mode operation which provides specialized data entry and display for the LORAN-C receiver/processor was developed. This unit will replace conventional communication terminal to simplify receiver operations to a level typical of current avionics systems.

Novacki, S. M., III↗
NASA NTRS1980

Evaluation of Loran-C enroute navigation and non-precision approaches within the State of Vermont

Results obtained in completing 257 nonprecision approaches and 44 data flights are discussed. The flights were initiated in the summer months and extended through four seasons and practically all weather conditions typical of the northeastern U.S. A preliminary assessment of the available data indicates that Loran-C signals are suitable as a means of navigation during enroute, terminal, and nonprecision approach operations and that the performance exceeds the minimum accuracy criteria specified by the applicable FAA advisory circular. Enroute operations are found to remain within + or - 0.75 nm of the desired track, compared with the requirement of + or - 2.5 nm. Terminal operations remained within + or - 0.65 nm of the desired track, compared with the FAA circular's requirement of + or - 1.5 nm; the nonprecision final approach operations were within the limit of + or - 0.6 nm for all operations.

Mackenzie, F. D.↗
NASA NTRS1983

Modified timing module for Loran-C receiver

Full hardware documentation is provided for the circuit card implementing the Loran-C timing loop, and the receiver event-mark and re-track functions. This documentation is to be combined with overall receiver drawings to form the as-built record for this device. Computer software to support this module is integrated with the remainder of the receiver software, in the LORPROM program.

Lilley, R. W.↗
NASA NTRS1983

Modified timing module for Loran-C receiver

Hardware documentation is provided for the modified LORAN-C timing module, which uses interrupt-driven software control in determining loop sample times. Computer loading is reduced by eliminating polled operation of the timing loop.

Lilley, R. W.↗
NASA NTRS1983

Lateral runway approach guidance using Loran-C

The design and flight test of a lateral guidance system for flying approaches to a runway by general aviation aircraft are examined. The issue is whether or not good dynamic response can be obtained by exploiting the repeatable accuracy of Loran-C position data and combining it with heading rate data. The pilot needs cross pointer displays so he can keep the aircraft within approx. 75 feet of the runway centerline at approach speeds typical of general aviation aircraft.

Simpson, R. W.↗
NASA NTRS1984

Processor-controlled timing module for LORAN-C receiver

Hardware documentation is provided for the modified LORAN-C timing module, which uses direct software control in determining loop sample times. Computer loading is reduced by eliminating polled operation of the timing loop.

Lilley, R. W.↗
NASA NTRS1987

Modified timing module for Loran-C receiver

Hardware documentation is provided for the modified Loran-C timing module, which used interrupt-driven software control in determing loop sample times. Computer loading is reduced by eliminating polled operation of the timing loop.

Lilley, Robert W.↗
NASA NTRS1987

Aircraft approach guidance using relative Loran-C navigation

The experiments carried out at MIT during 1984 focussed on two aspects of Loran-C relative navigation that would impact system performance at the sub-microsecond level of accuracy: tracking loop bandwidth and localized field deformation. Figures are given to illustrate the results from both effects.

Elias, Antonio L.↗
NASA NTRS1987

Processor-controlled timing module for Loran-C receiver

Hardware documentation is provided for the modified Loran-C timing module, which uses direct software control in determining loop sample times. Computer loading is reduced by eliminating polled operation of the timing loop.

Lilley, Robert W.↗
NASA NTRS1988

Loran-C monitor correlation over a 92-mile baseline in Ohio

Two Loran C monitors, at Galion and Athens, Ohio, were operated over a one-year period, measuring chain 9960 Time Delay (TD) and Signal to Noise Ratio (SNR). Analysis of data concentrated on correlation of short term TD variations during the winter months of 1985 to 86, over the 92 nm baseline. Excellent correlation was found, with slight additional improvement possible if local temperature is also included in the analysis. Although SNR and TD effects were suspected during the presence of thunderstorms near the monitors, the scope of the study did not permit storm by storm analysis. A computer tape data base of all measurements was produced, with measurements at both sites included. Data recording and analysis concentrated on the fall and winter months of September 1985 to February 1986.

Lilley, Robert W.↗
NASA NTRS1990

Sole means navigation and integrity through hybrid Loran-C and NAVSTAR GPS

A sole means navigation system does not only call for integrity, but also for coverage, reliability, availability and accuracy. Even though ground monitored GPS will provide integrity, availability is still not sufficient. One satellite outage can affect a large service area for several hours per day. The same holds for differential GPS; a total satellite outage cannot be corrected for. To obtain sufficient coverage, extra measurements are needed, either in the form of extra GPS satellites (expensive) or through redundant measurements from other systems. LORAN-C is available and will, hybridized with GPS, result in a system that has the potential to satisfy the requirements for a sole means navigation system for use in the continental United States. Assumptions are made about the qualification sole means, mainly based on current sole means systems such as VOR/DME. In order to allow for system design that will satisfy sole means requirements, it is recommended that a definition of a sole means navigation system be established. This definition must include requirements for availability, reliability, and integrity currently not specified. In addition to the definition of a sole means navigation system, certification requirements must be established for hybrid navigation systems. This will allow for design and production of a new generation of airborne navigation systems that will reduce overall system costs and simplify training procedures.

Vangraas, Frank↗
NASA NTRS1990

Recent developments of Loran-C in Europe

Even if recent developments, both technical and political, are affecting the satellite Global Positioning System (GPS) and GLONASS navigation systems, alone, in conjunction, or with a possible civilian overlay via INMARSAT or other satellites, time has proven that Loran-C can still be a viable solution for many problems. The aims here are twofold, to present a panorama of the most recent developments in the world and mostly in Europe, and to consider some technical aspects of two problems regarding the Mediterranean Sea chain. This chain is based on four stations, two in Italy, one in Spain and one in Turkey. The fate of the station in Turkey is known, in the sense that this station will not operate when the U.S. support will cease; the future of the Spanish station is not yet known, while Italy has expressed its intention to operate the two remaining stations. Consequently two problems need to be solved to assure at least the coverage of Italy and of the eastern Mediterranean Sea.

Leschiutta, Sigfrido↗
NASA NTRS1990

Frequency stabilization for mobile satellite terminals via LORAN

Digital satellite communication systems require careful management of frequency stability. Historically, frequency stability has been accomplished by continuously powered, high cost, high performance reference oscillators. Today's low cost mobile satellite communication equipment must operate under wide ranging environmental conditions, stabilize quickly after application of power, and provide adequate performance margin to overcome RF link impairments unique to the land mobile environment. Methods for frequency stabilization in land mobile applications must meet these objectives without incurring excessive performance degradation. A frequency stabilization scheme utilizing the LORAN (Long Range Navigation) system is presented.

Ernst, Gregory J.↗