Magnetism in Lithium-Oxygen Discharge Product
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Land-cover change has long been recognized as having marked effect on the amount of soil organic carbon (SOC). However, the microbially mediated processes and mechanisms on SOC are still unclear. In this study, the soil samples in a degenerative succession from alpine meadow to alpine steppe meadow in the Qinghai–Tibetan Plateau were analysed using high-throughput technologies, including Illumina sequencing and geochip functional gene arrays. The soil microbial community structure and diversity were significantly (p <.05) different between alpine meadow and alpine steppe meadow; the microbial α-diversity in alpine steppe meadow was significantly (p <.01) higher than in alpine meadow. Molecular ecological network analysis indicated that the microbial community structure in alpine steppe meadow was more complex and tighter than in the alpine meadow. Here, the relative abundance of soil microbial labile carbon degradation genes (e.g., pectin and hemicellulose) was significantly higher in alpine steppe meadow than in alpine meadow, but the relative abundance of soil recalcitrant carbon degradation genes (e.g., chitin and lignin) showed the opposite tendency. The Biolog Ecoplate experiment showed that microbially mediated soil carbon utilization was more active in alpine steppe meadow than in alpine meadow. Consequently, more soil labile carbon might be decomposed in alpine steppe meadow than in alpine meadow. Therefore, the degenerative succession of alpine meadow because of climate change or anthropogenic activities would most likely decrease SOC and nutrients medicated by changing soil microbial community structure and their functional potentials for carbon decomposition.
This study presents a parallel preconditioning method for distributed sparse linear systems, based on an approximate inverse of the original matrix, that adopts a general framework of distributed sparse matrices and exploits domain decomposition (DD) and low-rank corrections. The DD approach decouples the matrix and, once inverted, a low-rank approximation is applied by exploiting the Sherman--Morrison--Woodbury formula, which yields two variants of the preconditioning methods. The low-rank expansion is computed by the Lanczos procedure with reorthogonalizations. Numerical experiments indicate that, when combined with Krylov subspace accelerators, this preconditioner can be efficient and robust for solving symmetric sparse linear systems. Comparisons with pARMS, a DD-based parallel incomplete LU (ILU) preconditioning method, are presented for solving Poisson's equation and linear elasticity problems.
Al{sub 2}O{sub 3} was deposited by reactive high-power impulse magnetron sputtering at 600 °C onto pre-deposited Ti{sub 2}AlC(0001) thin films on α-Al{sub 2}O{sub 3}(0001) substrates. The Al{sub 2}O{sub 3} was deposited to a thickness of 65 nm and formed an adherent layer of epitaxial γ-Al{sub 2}O{sub 3}(111) as shown by transmission electron microscopy. The demonstration of epitaxial growth of γ-Al{sub 2}O{sub 3} on Ti{sub 2}AlC(0001) open prospects for growth of crystalline alumina as protective coatings on Ti{sub 2}AlC and related nanolaminated materials. The crystallographic orientation relationships are γ-Al{sub 2}O{sub 3}(111)//Ti{sub 2}AlC(0001) (out-of-plane) and γ- Al {sub 2}O{sub 3}(22{sup ¯}0)// Ti {sub 2} AlC (112{sup ¯}0) (in-plane) as determined by electron diffraction. Annealing in vacuum at 900 °C resulted in partial decomposition of the Ti{sub 2}AlC by depletion of Al and diffusion into and through the γ-Al{sub 2}O{sub 3} layer.
While current 3D CFD codes and modeling techniques have been shown capable of furnishing engineering data for complex scramjet flowfields, the usefulness of such efforts is primarily limited by solutions' CPU time requirements, and secondarily by memory requirements. Attention is presently given to the use of parallel computing capabilities for engineering CFD tools for the analysis of supersonic reacting flows, and to an illustrative incompressible CFD problem using up to 16 iPSC/2 processors with single-domain decomposition.
Rare earth tris(alkyl) complexes such as M(CH 2 SiMe 3 ) 3 (sol) n are widely used as precursors for many compounds and as homogeneous catalysts for alkene polymerization and alkane functionalization. However, the thermal instability of those most conveniently made from the commercially available lithium salt of the neosilyl anion, LiCH 2 SiMe 3 , Li(r), restricts their utility. We present a new range of synthetically useful, more kinetically stable rare earth neosilyl solvates, derived from a full kinetic study of the various possible decomposition mechanisms of 7 known and 12 new solvated rare earth neosilyl complexes M(CH 2 SiMe 3 ) 3 (sol) n M = Sc(III), Y(III), Lu(III), Sm(III), and sol = THF; TMEDA; DMPE; diglyme ((CH 3 ) 2 (OCH 2 CH 2 ) 2 O, G 2 ), triglyme ((CH 3 ) 2 (OCH 2 CH 2 ) 3 O, G 3 ). Surprisingly, simply using higher-denticity donors to sterically disfavor neosilyl γ-H elimination is not effective. While Sc(r) 3 ((CH 3 ) 2 (OCH 2 CH 2 ) 2 O) has a half-life, t 1/2 , of 258.1 h, six times longer than for Sc(r) 3 (C 4 H 8 O) 2 (t 1/2 = 43 h), Lu(r) 3 ((CH 3 ) 2 (OCH 2 CH 2 ) 2 O) and Y(r) 3 ((CH 3 ) 2 (OCH 2 CH 2 ) 2 O) do not show the expected, analogous increased t 1/2 . This is because new decomposition pathways appear for poorly fitting donors. Finally, kinetic studies demonstrate the impact of small, and increasing amounts of LiCl on the kinetics of the reactivity of the smaller alkyls Y(r) 3 (THF) 2 and Lu(r) 3 (THF) 2 ; molecules used in hydrocarbon chemistry and catalysis for fifty years. A new route to pure Y(r) 3 (THF) 2 , which avoids the traditional use of Li(r), is presented.
Nanodiamond (ND) supported metal oxide or metal catalysts exhibit excellent catalytic activity. ND/Cu nanocomposites and Cu nanoparticles were prepared by reducing Cu(NO{sub 3}){sub 2} in reverses micelle solution. Products were analyzed by X-ray diffraction (XRD), electron paramagnetic resonance (EPR) spectra, UV-vis optical characteristic and transmission electron microscopy (TEM). From the point of nucleation and grow of crystal, ND contributed to heterogeneous nucleation of Cu nanocrystal. The reactive mechanism was explored based on theory of free energy. The formation of resultant self-assembled structures was explained through diffusion-limited aggregation model and Marangoni effect. Both Cu and ND/Cu nanoparticles were strong catalysts on decomposition of NH{sub 4}ClO{sub 4} (AP), and ND/Cu is more effective.
Graphical abstract: PVP-protected Rh/Au bimetallic nanoparticles (BNPs) were prepared by using hydrogen sacrificial reduction method, the activity of Rh80Au20 BNPs were about 3.6 times higher than that of Rh NPs. - Highlights: • Rh/Au bimetallic nanoparticles (BNPs) of 3∼5 nm in diameter were prepared. • Activity for H{sub 2}O{sub 2} decomposition of BNPs is 3.6 times higher than that of Rh NPs. • The high activity of BNPs was caused by the existence of charged Rh atoms. • The apparent activation energy for H{sub 2}O{sub 2} decomposition over the BNPs was calculated. - Abstract: PVP-protected Rh/Au bimetallic nanoparticles (BNPs) were prepared by using hydrogen sacrificial reduction method and characterized by UV–vis, XRD, FT-IR, XPS, TEM, HR-TEM and DF-STEM, the effects of composition on their particle sizes and catalytic activities for H{sub 2}O{sub 2} decomposition were also studied. The as-prepared Rh/Au BNPs possessed a high catalytic activity for the H{sub 2}O{sub 2} decomposition, and the activity of the Rh{sub 80}Au{sub 20} BNPs with average size of 2.7 nm were about 3.6 times higher than that of Rh monometallic nanoparticles (MNPs) even the Rh MNPs possess a smaller particle size of 1.7 nm. In contrast, Au MNPs with size of 2.7 nm show no any activity. Density functional theory (DFT) calculation as well as XPS results showed that charged Rh and Au atoms formed via electronic charge transfer effects could be responsible for the high catalytic activity of the BNPs.
PFLOTRAN, a next-generation reactive flow and transport code for modeling subsurface processes, has been designed from the ground up to run efficiently on machines ranging from leadership-class supercomputers to laptops. Based on an object-oriented design, the code is easily extensible to incorporate additional processes. It can interface seamlessly with Fortran 9X, C and C++ codes. Domain decomposition parallelism is employed, with the PETSc parallel framework used to manage parallel solvers, data structures and communication. Features of the code include a modular input file, implementation of high-performance I/O using parallel HDF5, ability to perform multiple realization simulations with multiple processors per realization in a seamless manner, and multiple modes for multiphase flow and multicomponent geochemical transport. Chemical reactions currently implemented in the code include homogeneous aqueous complexing reactions and heterogeneous mineral precipitation/dissolution, ion exchange, surface complexation and a multirate kinetic sorption model. PFLOTRAN has demonstrated petascale performance using 217 processor cores on problems composed of over 2 billion degrees of freedom. The code is currently being applied to simulate uranium transport at the Hanford 300 Area and CO2 sequestration in deep geologic formations.
Here, using ion irradiation and transmission electron microscopy, temperature dependent void swelling and dislocation loop evolution in equiatomic NiCoFeCrMn and NiCoFeCrPd high entropy alloys were investigated. Voids were observed in all tested conditions. An order higher of swelling was observed in both HEAs as temperature increased from 420 to 580 °C. Alloying with Pd was found to have a stronger suppression effect on void and dislocation loop growth than alloying with Mn. Possible contributions to the swelling resistance were explored, including localized lattice distortion and higher defect migration barrier in NiCoFeCrPd. Additionally, no phase decomposition was observed in either alloy.
Highlights: • Oxide film of aged cladding material in high temperature water was studied. • Thermal aging contributed to high corrosion susceptibility of the ferrite phase. • Highly corrosion of aged ferrite phase was caused by spinodal decomposition. • Carbides along phase boundary facilitated the corrosion of the cladding material. - Abstract: Characteristics of the oxide film formed on stainless steel weld overlay cladding aged at 400 °C for different times in high temperature water were studied. The results showed that thermal aging showed no obvious effect on the volume fraction of ferrite phase but resulted in high corrosion susceptibility of the aged ferrite phase mainly. The oxide film formed on the unaged cladding material consisted of 100-nm-thick inner oxide layer (FeCr{sub 2}O{sub 4} and Cr{sub 2}O{sub 3}) and Fe-rich outer oxide particles (Fe{sub 3}O{sub 4}) with a size of 2 O4, Cr{sub 2}O{sub 3} and Fe{sub 3}O{sub 4}) and outer oxide particles (Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4}) with a size of <700 nm formed on the aged ferrite phase. Spinodal decomposition was considered as the main factor to promote the corrosion of the aged ferrite phase, and existence of carbides along phase boundary facilitated corrosion of the cladding material in high temperature water.
The energies of mixing (interaction parameters) in the Sc{sub 1–x}Ln{sub x}PO{sub 4} (Ln = Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Y) systems have been calculated using Urusov’s crystal energy theory of isomorphous substitutions. The decomposition (stability) temperatures of the solid solutions have been plotted against the atomic number of the rare-earth elements at x = 0.01, 0.03, 0.05, 0.10, 0.20, and 0.50. The present results can be helpful in a search for host and activator compositions for new luminescence, laser, and other materials based on the zircon-structured rare-earth orthophosphates.
Due to the high global warming potential (GWP) and increasing environmental concerns, efforts on searching the alternative gases to SF{sub 6}, which is predominantly used as insulating and interrupting medium in high-voltage equipment, have become a hot topic in recent decades. Overcoming the drawbacks of the existing candidate gases, C5- perfluorinated ketone (C5 PFK) was reported as a promising gas with remarkable insulation capacity and the low GWP of approximately 1. Experimental measurements of the dielectric strength of this novel gas and its mixtures have been carried out, but the chemical decomposition pathways and products of C5 PFK during breakdown are still unknown, which are the essential factors in evaluating the electric strength of this gas in high-voltage equipment. Therefore, this paper is devoted to exploring all the possible decomposition pathways and species of C5 PFK by density functional theory (DFT). The structural optimizations, vibrational frequency calculations and energy calculations of the species involved in a considered pathway were carried out with DFT-(U)B3LYP/6-311G(d,p) method. Detailed potential energy surface was then investigated thoroughly by the same method. Lastly, six decomposition pathways of C5 PFK decomposition involving fission reactions and the reactions with a transition states were obtained. Important intermediate products were also determined. Among all the pathways studied, the favorable decomposition reactions of C5 PFK were found, involving C-C bond ruptures producing Ia and Ib in pathway I, followed by subsequent C-C bond ruptures and internal F atom transfers in the decomposition of Ia and Ib presented in pathways II + III and IV + V, respectively. Possible routes were pointed out in pathway III and lead to the decomposition of IIa, which is the main intermediate product found in pathway II of Ia decomposition. We also investigated the decomposition of Ib, which can undergo unimolecular reactions to give the formation of IV a, IV b and products of CF{sub 3} + CF-CF{sub 3} in pathway IV. Although IV a is dominant to a lesser extent due to its relative high energy barrier, its complicated decomposition pathway V was also studied and CF{sub 3}, C = CF{sub 2} as well as C-CF{sub 3} species were found as the ultimate products. To complete the decomposition of C5 PFK, pathway V I of Ic decomposition was fully explored and the final products were obtained. Therefore, the integrate decomposition scheme of C5 PFK was proposed, which contains six pathways and forty-eight species (including all the reactants, products and transition states). This work is hopeful to lay a theoretical basis for the insulating properties of C5 PFK.
Explore the source record for details and available documents.
The determination of an atomistic graphene oxide (GO) model has been challenging due to the structural dependence on different synthesis methods. In this work we combine temperature-programmed molecular dynamics simulation techniques and the ReaxFF reactive force field to generate realistic atomistic GO structures. By grafting a mixture of epoxy and hydroxyl groups to the basal graphene surface and fine-tuning their initial concentrations, we produce in a controllable manner the GO structures with different functional groups and defects. The models agree with structural experimental data and with other ab initio quantum calculations. Using the generated atomistic models, we perform reactive adsorption calculations for H{sub 2}S and H{sub 2}O/H{sub 2}S mixtures on GO materials and compare the results with experiment. We find that H{sub 2}S molecules dissociate on the carbonyl functional groups, and H{sub 2}O, CO{sub 2}, and CO molecules are released as reaction products from the GO surface. The calculation reveals that for the H{sub 2}O/H{sub 2}S mixtures, H{sub 2}O molecules are preferentially adsorbed to the carbonyl sites and block the potential active sites for H{sub 2}S decomposition. The calculation agrees well with the experiments. The methodology and the procedure applied in this work open a new door to the theoretical studies of GO and can be extended to the research on other amorphous materials.
We report the first direct experimental evidence of the dynamic behavior of the solid-electrolyte-interphase (SEI) on copper electrodes upon electrochemical cycling. Synchrotron-based soft X-ray absorption spectroscopy (sXAS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) consistently show that both the chemical composition and the thickness of the SEI change with electrochemical potential throughout the slow formation process. In particular, sXAS results show that the nascent carbonate species in SEI show redox reversibility and decompose during the delithiation (oxidation) process, which leads to a significant shrinking of the SEI thickness as confirmed by TOF-SIMS. Meanwhile, the carbonates also matures and become more and more inactive at every lithiation (reduction) process. These experimental observations reveal unambiguously that SEI formation is much more complicated than a simple and monotonous deposition of electrolyte decomposition product; instead, it could be an oscillating process with a breathing growth.
Lithium-ion batteries increasingly play significant roles in modern technologies; however, increased energy density also raises concerns about electrolyte safety. Traditional electrolytes that use volatile organic solvents face risks of thermal runaways and fires from electrode shorting. In response, polymer-based solid electrolytes have been developed for replacement. Polyacrylonitrile (PAN) is a promising fire-resistant component for electrolyte fabrication, but its limited solubility necessitates using low-volatility solvents, which are notoriously difficult to remove in subsequent drying processes. Here, we use femtosecond two-dimensional infrared spectroscopy to provide an in-depth understanding of how residual solvent from processing affects the molecular structures and dynamics within a polymer electrolyte. To this end, linear and nonlinear infrared spectroscopies are employed to interrogate the molecular interactions in PAN-based electrolytes containing various contents of N,N-dimethylformamide (DMF). We show that the amount of DMF within the PAN electrolyte affects the Li+ structure. Further, the coordination can proceed through the carbonyl group and/or the amide nitrogen to form antiparallel structures with the nitrile groups of PAN through dipole–dipole interactions. The free motion of DMF is drastically inhibited upon interaction with Li+ and PAN, which decreases the ionic conductivity and potentially affects the stability (resistance toward removal and chemical decomposition). These findings have implications for the design and processing of solid polymer electrolytes.
Graphical abstract: A facile method to produce monodispersed magnetite nanoparticles is based on the solvothermal reaction of iron acetylacetonate (Fe(acac)3) decomposition. The sizes ranged from 7 to 12 nm, which could be controlled by adjusting the volume ratio of oleylamine to n-hexane. Display Omitted Highlights: ► The solvethermal reaction of Fe(acac){sub 3} decomposition was carried out at mild temperature in the presence of oleylamine and n-hexane. ► The size of nanocrystals is controlled by adjusting the volume ratio of oleylamine to n-hexane. ► The low-boiling-point solvent n-hexane offered autogenous pressure parameter after gasified in the reaction temperature. ► The as prepared hydrophobic monodisperse Fe{sub 3}O{sub 4} NPs can be used to prepare the magnetic micelles for future biomedical applications. -- Abstract: A new solvothermal method is proposed for the preparation of Fe{sub 3}O{sub 4} nanoparticles (NPs) from iron acetylacetonate in the presence of oleylamine and n-hexane. The products are characterized by X-ray powder diffraction, infrared (IR) spectroscopy, transmission electron microscopy, thermogravimetry/differential thermogravimetry (TG/DTG) analysis, and vibrating sample magnetometery. The new procedure yields superparamagnetic monodispersed Fe{sub 3}O{sub 4} particles with sizes ranging from 7 nm to 12 nm. The nanocrystal sizes are controlled by adjusting the volume ratio of oleylamine to n-hexane. IR and TG/DTG analyses indicate that the oleylamine molecules, as stabilizers, are adsorbed on the surface of Fe{sub 3}O{sub 4} NPs as bilayer adsorption models. The surface adsorption quantities of oleylamine on 7.5 and 10.4 nm-diameter Fe{sub 3}O{sub 4} NPs are 18% and 11%, respectively. The hydrophobic surface of the obtained nanocrystals is passivated by adsorbed organic solvent molecules. These molecules provide stability against agglomeration, enable solubility in nonpolar solvents, and allow the formation of magnetic polymer micelles.