Search NASA⌕ Search

SEARCH · Search NASA

Results for “LaRC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

The Development of the Ducted Fan Noise Propagation and Radiation Code CDUCT-LaRC

The development of the ducted fan noise propagation and radiation code CDUCT-LaRC at NASA Langley Research Center is described. This code calculates the propagation and radiation of given acoustic modes ahead of the fan face or aft of the exhaust guide vanes in the inlet or exhaust ducts, respectively. This paper gives a description of the modules comprising CDUCT-LaRC. The grid generation module provides automatic creation of numerical grids for complex (non-axisymmetric) geometries that include single or multiple pylons. Files for performing automatic inviscid mean flow calculations are also generated within this module. The duct propagation is based on the parabolic approximation theory of R. P. Dougherty. This theory allows the handling of complex internal geometries and the ability to study the effect of non-uniform (i.e. circumferentially and axially segmented) liners. Finally, the duct radiation module is based on the Ffowcs Williams-Hawkings (FW-H) equation with a penetrable data surface. Refraction of sound through the shear layer between the external flow and bypass duct flow is included. Results for benchmark annular ducts, as well as other geometries with pylons, are presented and compared with available analytical data.

Nark, Douglas M.↗
NASA NTRS1997

The Wettability of LaRC Colorless Polyimide Resins on Casting Surfaces

Two colorless polyimides developed at NASA Langley Research Center, LaRC -CP1 and LaRC -CP2, are noted for being optically transparent, resistant to radiation, and soluble in the imide form. These materials may be used to make transparent, thin polymer films for building large space reflector/collector inflatable antennas, solar arrays, radiometers, etc. Structures such as these require large area, seamless films produced via spin casting or spray coating the soluble imide on a variety of substrates. The ability of the soluble imide to wet and spread over the mandrel or casting substrate is needed information for processing these structures with minimum waste and reprocessing, thereby, reducing the production costs. The wettability of a liquid is reported as the contact angle of the solid/liquid system. This fairly simple measurement is complicated by the porosity and the amount of contamination of the solid substrate. This work investigates the effect of inherent viscosity, concentration of polyimide solids, and solvent type on the wettability of various curing surfaces.

Miner, Gilda A.↗
NASA NTRS2005

Mitigating Motion Base Safety Issues: The NASA LaRC CMF Implementation

The NASA Langley Research Center (LaRC), Cockpit Motion Facility (CMF) motion base design has taken advantage of inherent hydraulic characteristics to implement safety features using hardware solutions only. Motion system safety has always been a concern and its implementation is addressed differently by each organization. Some approaches rely heavily on software safety features. Software which performs safety functions is subject to more scrutiny making its approval, modification, and development time consuming and expensive. The NASA LaRC's CMF motion system is used for research and, as such, requires that the software be updated or modified frequently. The CMF's customers need the ability to update the simulation software frequently without the associated cost incurred with safety critical software. This paper describes the CMF engineering team's approach to achieving motion base safety by designing and implementing all safety features in hardware, resulting in applications software (including motion cueing and actuator dynamic control) being completely independent of the safety devices. This allows the CMF safety systems to remain intact and unaffected by frequent research system modifications.

Bryant, Richard B., Jr.↗
NASA NTRS2007

Comparison of CALIPSO-Like, LaRC, and MODIS Retrievals of Ice Cloud Properties over SIRTA in France and Florida during CRYSTAL-FACE

This study compares cirrus particle effective radius retrieved by a CALIPSO-like method with two similar methods using MODIS, MODI Airborne Simulator (MAS), and GOES imagery. The CALIPSO-like method uses lidar measurements coupled with the split-window technique that uses the infrared spectral information contained at the 8.65-micrometer, 11.15-micrometer and 12.05-micrometer bands to infer the microphysical properties of cirrus clouds. The two other methods, sing passive remote sensing at visible and infrared wavelengths, are the operational MODIS cloud products (referred to by its archival product identifier MOD06 for MODIS Terra) and MODIS retrievals performed by the CERES team at LaRC (Langley Research Center) in support of CERES algorithms; the two algorithms will be referred to as MOD06- and LaRC-method, respectively. The three techniques are compared at two different latitudes: (i) the mid-latitude ice clouds study uses 18 days of observations at the Palaiseau ground-based site in France (SIRTA: Site Instrumental de Recherche par Teledetection Atmospherique) including a ground-based 532 nm lidar and the Moderate Resolution Imaging Spectrometer (MODIS) overpasses on the Terra Platform, (ii) the tropical ice clouds study uses 14 different flight legs of observations collected in Florida, during the intensive field experiment CRYSTAL-FACE (Cirrus Regional Study of Tropical Anvils and cirrus Layers-Florida Area Cirrus Experiment), including the airborne Cloud Physics Lidar (CPL) and the MAS. The comparison of the three methods gives consistent results for the particle effective radius and the optical thickness, but discrepancies in cloud detection and altitudes. The study confirms the value of an active remote-sensing method (CALIPSO-like) for the study of sub-visible ice clouds, in both mid-latitudes and tropics. Nevertheless, this method is not reliable in optically very thick tropical ice clouds.

Chiriaco, M.↗
NASA NTRS2020

LaRC SmartLab Apps For Instrument Control and Data Processing: Laboratory Environment Monitor

The LaRC SmartLab applications are a series of software tools to greatly enhance researcher efficiency by streamlining and automating workflows. Python scripts and applications are increasingly being used in scientific workflows, including for instrument control and data processing. Interactive Python scripting environments such as JupyterLab provide powerful tools for using Python. In some use cases, the development of standalone applications with dedicated graphical user interfaces can enhance the utility of the code and open it up to more users, including non-programmers. Here, we describe a Python based application for communicating with, and displaying data from, iTHX Temperature, Humidity, and Dew Point probes. We discuss the set up and use of the application as well as its implementation. We also highlight the use of Simulated probes to enable users and developers to familiarize with or debug the application, even when they do not have access to the physical hardware in the laboratory.

LaRC SmartLab↗
NASA NTRS1977

Results of phase change heat transfer test OH51 using 0.006-scale space shuttle orbiter models 46-0 and 90-0 and partial wing 0.0175-scale model 64-0 in the LaRC 31-inch CFHT

Test OH51 was a phase change paint test conducted in the LaRC 31-inch CFHT utilizing models 46-0, 64-0, and 90-0. Model 46-0 represented the space shuttle configuration 139 Orbiter. Model 90-0 represented the configuration 140 Orbiter. Model 64-0 represented the forward 45% portion of the Orbiter wing. The partial wing was tested with a shock generator located at various positions relative to the wing. The test was conducted at Mach 10.0, angles of attack from 27.5 deg through 37.5 deg, and Reynolds numbers of 0.5 and 1.5 million per foot.

Cummings, J. W.↗
NASA NTRS1977

Results of phase change paint thermal mapping test OH46 using the 0.006-scale model 90-0 in the NASA LaRC variable density tunnel

Results of a test conducted in the NASA LaRC Mach 8 variable density tunnel to obtain thermal contours on a 0.006 scale model of the configuration 140B Space Shuttle Orbiter are presented using the phase change paint technique. The model was tested at 25 deg, 30 deg, and 35 deg angle of attack at unit Reynolds numbers ranging from 1.0 through 8.0 million per foot. The model was tested with and without a ventral fin mounted on its bottom centerline. Elevon deflections of 0 deg and 10 deg and bodyflap deflections of 0 and 13.75 deg were investigated.

Cummings, J. W.↗
NASA NTRS1976

LaRC-160 - A new 550 F polyimide laminating resin

A new addition polyimide, LaRC-160, based on liquid monomers has been prepared. The essentially solventless prepreg retains good drape and tack. Unidirectional HT-S composites were fabricated and tested before and after aging at temperatures between 505 K and 589 K (450 F and 600 F). Excellent retention of mechanical properties was realized after 2000 hours at 547 K (525 F). This material should be a candidate for solventless prepregging due to the liquid nature of the monomeric mixture.

St. Clair, T. L.↗
NASA NTRS1979

LaRC-160 fabrication development

The scope and status of the fabrication development program on the third candidate graphite/polyimide material, utilizing the LARC-160 polyimide system is reported. The results of initial chemical characterization studies on resin monomer constituents and intermediate esters are discussed, in particular, the problem of identifying the nadic ester endcapper material and establishing specifications to ensure material reproducibility. Progress on the process development task, including prestaging, cure, and postcure studies on flat laminates is reported. In addition, the design and processing of hat and "I" section stiffeners is reviewed. Initial efforts on the development of standards for nondestructive C-scan inspection for the various types of structures are discussed. The approach to qualifying the developed processes is outlined along with other ancillary studies in progress.

Leahy, J. D.↗
NASA NTRS1979

Development of LARC-13 adhesive systems

Various adhesive formulations were evaluated and the effects of various environments upon different titanium bond surface treatments were noted. Initial data show LARC-13 to possess good 589K (600 F) stability as compared to other high temperature stable systems.

Hoggatt, J. T.↗
NASA NTRS1980

Characterization of aging effects of LARC-160

Specimens of freshly prepared polyimide precursor resin LARC-160 and resin aged at room temperature up to 45 days were characterized by high-pressure liquid chromatography and several different thermal analyses. Graphite reinforced composites were then fabricated from fresh and aged resin and tested to determine if changes observed by these techniques were significant. It was found that resin aging resulted in greater flow during processing and poorer composite isothermal stability. However, aging did not affect the room-temperature flexural or short-beam-shear strengths of the composites.

Young, P. R.↗
NASA NTRS1980

Fabrication of LARC 160/NR150B2 hybrid matrix polyimide composites

Graphite-polyimide composite materials exhibit high performance, low weight, and good thermal-oxidative stability, making them promising candidates for Space Shuttle applications. However, no single material is excellent in all respects: processibility, thermal-oxidative stability, toughness, and mechanical properties. This paper describes the development of hybrid matrix composite laminates that combine the attributes of two polyimide resins, NR150B2 and LARC 160, while avoiding their drawbacks. High quality laminates were fabricated from each resin system, and hybrid laminates were successfully co-cured, evaluated, and optimized.

Bergren, O. D.↗
NASA NTRS1980

Chemical analysis of LARC-160 polyimide

As part of a detailed NASA-sponsored study of chemical composition/property sensitivity of the LARC-160 polymerization of monomeric reactants (PMR) polyimide system, a number of liquid chromatographic techniques have been employed. The ester monomers in this system are characterized by a reverse-phase ion-suppression method. Mono, di, and triesters of the 3,3',4,4'-benzophenonetetracarboxylic acid ingredient are identified and their isomeric forms resolved. The 5-norbornene-2,3-dicarboxylic acid ester (nadic ester) endcapper is detected by low wavelength ultraviolet sensing. A second method, reverse-phase ion-pair chromatography, is employed for determining unreacted amines. The extent of resin B-staging is monitored through analysis of the ester/amine oligomers.

Dynes, P. J.↗
NASA NTRS1980

Analysis of aromatic polyamine mixtures for formulation of LARC-160 resin

An investigation was conducted to identify a potential substitute for the aromatic polyamine mixture, Jeffamine AP-22, currently used to formulate LARC-160 polyimide precursor resin. Jeffamine AP-22 was characterized by high pressure liquid chromatography and mass spectrometry. Eleven different aromatic amines in the mixture were isolated and identified. Subsequent liquid chromatographic analysis of nine additional commercially available aromatic polyamine mixtures identified three candidates that are similar in composition to AP-22.

Young, P. R.↗
NASA NTRS1981

NASA LARC RAFTOR documentation version 1.0

The use of a preprocessor of the LaRC computer center that converts RAFTOR source into FORTRAN source code is described. The purpose of RAFTOR is to make FORTRAN a better programming language for both writing and structuring programs. It is concluded that RAFTOR can generate a well structured program with a source code that is easy to follow.

Dunn, H. J.↗
NASA NTRS1983

Guidelines in preparing computer-generated plots for NASA technical reports with the LaRC graphics output system

To response to a need for improved computer-generated plots that are acceptable to the Langley publication process, the LaRC Graphics Output System has been modified to encompass the publication requirements, and a guideline has been established. This guideline deals only with the publication requirements of computer-generated plots. This report explains the capability that authors of NASA technical reports can use to obtain publication--quality computer-generated plots or the Langley publication process. The rules applied in developing this guideline and examples illustrating the rules are included.

Taylor, N. L.↗
NASA NTRS1985

An evaluation of proposed acoustic treatments for the NASA LaRC 4 x 7 meter wind tunnel

The NASA LaRC 4 x 7 Meter Wind Tunnel is an existing facility specially designed for powered low speed (V/STOL) testing of large scale fixed wing and rotorcraft models. The enhancement of the facility for scale model acoustic testing is examined. The results are critically reviewed and comparisons are drawn with a similar wind tunnel (the DNW Facility in the Netherlands). Discrepancies observed in the comparison stimulated a theoretical investigation using the acoustic finite element ADAM System, of the ways in which noise propagating around the tunnel circuit radiates into the open test section. The reasons for the discrepancies noted above are clarified and assists in the selection of acoustic treatment options for the facility.

Abrahamson, A. L.↗