Search NASA⌕ Search

SEARCH · Search NASA

Results for “Laser-based processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

60 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Airborne Measurements of Atmospheric Methane Using Pulsed Laser Transmitters

Atmospheric methane (CH4) is the second most important anthropogenic greenhouse gas with approximately 25 times the radiative forcing of carbon dioxide (CO2) per molecule. At NASA Goddard Space Flight Center (GSFC) we have been developing a laser-based technology needed to remotely measure CH4 from orbit. We report on our development effort for the methane lidar, especially on our laser transmitters and recent airborne demonstration. Our lidar transmitter is based on an optical parametric process to generate near infrared laser radiation at 1651 nanometers, coincident with a CH4 absorption. In an airborne flight campaign in the fall of 2015, we tested two kinds of laser transmitters --- an optical parametric amplifier (OPA) and an optical parametric oscillator (OPO). The output wavelength of the lasers was rapidly tuned over the CH4 absorption by tuning the seed laser to sample the CH4 absorption line at several wavelengths. This approach uses the same Integrated Path Differential Absorption (IPDA) technique we have used for our CO2 lidar for ASCENDS. The two laser transmitters were successfully operated in the NASAs DC-8 aircraft, measuring methane from 3 to 13 kilometers with high precision.

optical radar↗
NASA NTRSDate not supplied

Advanced Diagnostics for Megahertz Imaging of Mixing, Fuel Spray, and Combustion Processes for Rotating Detonation Combustors

Recent advancements in megahertz rate, high-power, burst-mode laser technology are leveraged to perform and explore imaging measurements that spatially and temporally resolve the mixing, combustion, and detonation flow field in two laboratory-scale rotating detonation combustors (RDCs). In a non-premixed annular RDC, multiple imaging diagnostics are explored to investigate gaseous and liquid injector behavior, the detonation wave structure, and the propellant refill. In one instance, OH planar laser-induced fluorescence (OH-PLIF) imaging is performed up to a 2 MHz repetition rate to track the combustion products and reaction zone locations. In the same annular RDC, a single liquid fuel jet is injected, and laser-based 355-nm imaging of the fuel spray is performed up to a 1 MHz repetition rate. For this configuration, the annular RDC is used as a detonation driver to impose periodic detonation waves to interact with the fuel spray. Moreover, in this annular RDC, a range of tracer-based laser imaging measurements are explored to time-resolve the unsteady oxidizer air recovery and refill process. In a non-premixed linear RDC, planar imaging measurements of the fuel mixing are performed up to a 200 kHz repetition rate using PLIF of a tracer in the fuel supply. The fuel mixing imaging helps explain the origin of the observed pre and post wave burning, detonation structure, and enables quantifying injector recovery timescales. This paper will provide a high-level broad survey of diagnostics applied in these RDCs, lessons learned, and interesting observations.

Combustion↗
NASA NTRSDate not supplied

Advanced Diagnostics For Megahertz Imaging Of Mixing, Fuel Spray, And Combustion Processes For Rotating Detonation Combustors

Recent advancements in megahertz rate, high-power, burst-mode laser technology are leveraged to perform and explore imaging measurements that spatially and temporally resolve the mixing, combustion, and detonation flow field in two laboratory-scale rotating detonation combustors (RDCs). In a non-premixed annular RDC, multiple imaging diagnostics are explored to investigate gaseous and liquid injector behavior, the detonation wave structure, and the propellant refill. In one instance, OH planar laser-induced fluorescence (OH-PLIF) imaging is performed up to a 2 MHz repetition rate to track the combustion products and reaction zone locations. In the same annular RDC, a single liquid fuel jet is injected, and laser-based 355-nm imaging of the fuel spray is performed up to a 1 MHz repetition rate. For this configuration, the annular RDC is used as a detonation driver to impose periodic detonation waves to interact with the fuel spray. Moreover, in this annular RDC, a range of tracer-based laser imaging measurements are explored to time-resolve the unsteady oxidizer air recovery and refill process. In a non-premixed linear RDC, planar imaging measurements of the fuel mixing are performed up to a 200 kHz repetition rate using PLIF of a tracer in the fuel supply. The fuel mixing imaging helps explain the origin of the observed pre and post wave burning, detonation structure, and enables quantifying injector recovery timescales. This paper will provide a high-level broad survey of diagnostics applied in these RDCs, lessons learned, and interesting observations.

Combustion↗
NASA NTRS2023

A 3D Printable Alloy Designed for Extreme Environments

Multiprincipal-element alloys are an enabling class of materials owing to their impressive mechanical and oxidation-resistant properties, especially in extreme environments. Here we develop a new oxide-dispersion-strengthened NiCoCr-based alloy using a model-driven alloy design approach and laser-based additive manufacturing. This oxide-dispersion-strengthened alloy, called GRX-810, uses laser powder bed fusion to disperse nanoscale Y 2 O 3 particles throughout the microstructure without the use of resource-intensive processing steps such as mechanical or in situ alloying. We show the successful incorporation and dispersion of nanoscale oxides throughout the GRX-810 build volume via high-resolution characterization of its microstructure. The mechanical results of GRX-810 show a twofold improvement in strength, over 1,000-fold better creep performance and twofold improvement in oxidation resistance compared with the traditional polycrystalline wrought Ni-based alloys used extensively in additive manufacturing at 1,093 °C. The success of this alloy highlights how model-driven alloy designs can provide superior compositions using far fewer resources compared with the ‘trial-and-error’ methods of the past. These results showcase how future alloy development that leverages dispersion strengthening combined with additive manufacturing processing can accelerate the discovery of revolutionary materials.

Timothy M. Smith↗
NASA NTRS2023

Moon-to-Mars Planetary Autonomous Construction Technology: MMPACT Material Screening

NASA’s Space Technology Mission Directorate “champions technologies needed to live on and explore the Moon” [1]. This includes capabilities that capitalize on existing lunar resources and carry out surface manufacturing and construction activities. The goal of the Moon-to-Mars Planetary Construction Technology (MMPACT) Project is to mature these two capabilities. The primary resource on the Moon and the primary feedstock for manufacturing and construction is regolith. In the past, astronauts launched, landed, and lived in a spacecraft. NASA envisions a future where we make living spaces on the lunar surface instead. The innovative technologies required for lunar surface construction may be something never seen before, or they may be adaptations of existing technologies. MMPACT must screen for the most feasible technologies with the earliest potential technology insertions given the ambitious goals of the Artemis campaign. This poster summarizes recent efforts to discover and document mechanical and thermal capabilities of various technologies: a laser-based vitreous material transformation from Texas-based ICON, a molten extrusion process from ICON, a mortar from MSFC, a mortar from an MSFC-Louisiana State University partnership, and a geopolymer from a MSFC-Pennsylvania State University partnership. Other testing and development activities are documented as well. [1] https://www.nasa.gov/directorates/spacetech/Lunar_Surface_Innovation_Initiative

In-situ Resource Utilization↗
NASA NTRSDate not supplied

Guidance, Navigation, and Control for Laser-Based Non-Cooperative Target Detumbling

Orbital debris is a well known and growing problem presenting risks to the future of spaceflight. Many pieces of debris are defunct satellites or rocket upper stages. These large objects could generate an exponentially growing cloud of debris should they be involved in a collision, i.e., Kessler Syndrome. Future orbital debris remediation efforts often propose perturbing the orbit of these large targets to mitigate risk. These plans often involve non-cooperative rendezvous. In the absence of active control, the targets are expected to be tumbling which makes rendezvous a dangerous prospect. In this work we describe a guidance, navigation, and control system for a contactless non-cooperative target detumbling methodology which will significantly increase the safety of non-cooperative rendezvous. An onboard laser generates thrust on the target by ablating its surface material. This thrust is used to control target attitude. Our guidance, navigation, and control system is able to estimate relative pose, target the laser, and maintain formation flight during the detumbling process. The system is validated with Monte Carlo simulation in a variety of scenarios.

Guidance↗