Search NASA⌕ Search

SEARCH · Search NASA

Results for “Liquid structure simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Sculpting stable structures in pure liquids

Pure liquids in thermodynamic equilibrium are structurally homogeneous. In liquid crystals, flow and light pulses are used to create reconfigurable domains with polar order. Moreover, through careful engineering of concerted microfluidic flows and localized optothermal fields, it is possible to achieve complete control over the nucleation, growth, and shape of such domains. Experiments, theory, and simulations indicate that the resulting structures can be stabilized indefinitely, provided the liquids are maintained in a controlled nonequilibrium state. The resulting sculpted liquids could find applications in microfluidic devices for selective encapsulation of solutes and particles into optically active compartments that interact with external stimuli.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Matlab implementation of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures

This paper presents the MatLab implementation details of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures. This includes the parameterization of the modeling equations, and the initialization of the simulation based on experimental conditions. More importantly, it provides details on how the differential equations governing mass balances in both gas and liquid phases are integrated together to simulate the system dynamics over time. The semi-structured kinetic model for methanotroph-photoautotroph coculture is validated using a wide range of experimental conditions. The model: Accurate predicts both the coculture growth in liquid phase and the gas composition changes in head space over time; Explicitly models the exchange of in situ produced O 2 and CO 2 within the coculture; Considers the self-shading effect on the growth of photoautotroph.

42 ENGINEERING↗
DOE OSTI2025

Minimal implicit-solvent coarse-grained simulation of Pluronic block copolymers with ionic liquids

Pluronic block copolymers, composed of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in a triblock structure (PEO–PPO–PEO), are well known for their amphiphilic character and ability to self‐assemble into micelles in aqueous solution. The addition of ionic liquids (ILs) can further modulate the core–shell structures of these copolymers, influencing their stability, critical micellization temperature, and size. However, fully atomistic simulations often become prohibitively expensive due to the size and complexity of these systems. In this work, coarse‐grained simulations using a minimal implicit‐solvent model were performed to examine how two classes of ILs, namely, 1‐alkyl‐3‐methylimidazolium ([C n C 1 im]) and 1‐alkyl‐3‐methylpyrrolidinium ([C n C 1 pyrr]), change the micellization of Pluronic block copolymers in aqueous solution. The effects of IL concentration and alkyl group length were investigated, and the model greatly improved the efficiency of simulating large‐scale micelle systems. Furthermore, the numerical simulations are qualitatively compared with experimental investigations. Our results show that adding ILs expands the micelle core by embedding IL tails among the PPO blocks, thereby increasing overall micelle size. Less polar ILs generally induce more pronounced micellar growth. However, the effect of IL tail length on conformation and micellar packing is non‐monotonic. Up to moderate chain lengths (around C8–C10), the IL tails can extend sufficiently to increase local separation within the micelle; at longer tail lengths, enhanced hydrophobic clustering and steric hindrance cause the tails to bend or fold, capping further expansion. In addition, although block copolymer chains tend to pack more closely in the presence of longer‐tailed ILs, the random coil size of an individual polymer chain does not necessarily shrink. Meanwhile, these insights provide a deeper understanding of how Pluronic/IL systems interact, informing applications in drug delivery, cosmetics, food, and environmental engineering. Finally, our minimal implicit‐solvent model can be applied to larger systems and longer timescales, substantially reducing computational cost while reproducing key structural trends observed experimentally.

Atomistic simulations↗
DOE OSTI2024

Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. Further, the main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Temperature-induced structural evolution in liquid Ag-Ga alloys

Temperature-dependent atomic structural evolutions of liquid Ag 60 Ga 40 and Ag 70 Ga 30 alloys have been studied by in situ high-energy x-ray-diffraction (HEXRD) experiments combined with ab initio molecular-dynamics simulations. The experimental data show a reversible structural crossover at about 1050 ~ 1100 (± 50) K in both liquid Ag 60 Ga 40 and Ag 70 Ga 30 alloys. Obvious changes of the electrical resistivity, absolute thermoelectric power, and atomic diffusivity around the similar temperature range for both Ag-Ga liquids strongly support the HEXRD results. The origin of the liquid-to-liquid crossover in both Ag-Ga liquids was suggested to link with the rearrangements of Ag and Ga atoms, i.e., Ag and Ga atoms prefer to associate with themselves in the higher temperature range above 1100 K, consistent with the accelerated increase of the strong covalently bonded Ga–Ga dimers in both Ag-Ga liquids. In addition, more studies from the energy aspect are still desirable to understand the rearrangements of Ag and Ga atoms in the higher temperature range in both Ag-Ga liquids.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Performance Evaluation of the Gravity Probe B Design

This report documents the simulation of the Lockheed Martin designed Gravity Probe B (GPB) spacecraft developed tool by bd Systems Inc using the TREETOPS simulation. This study quantifies the effects of flexibility and liquid helium slosh on GPB spacecraft control performance. The TREETOPS simulation tool permits the simulation of flexible structures given that a flexible body model of the structure is available. For purposes of this study, a flexible model of the GPB spacecraft was obtained from Lockheed Martin. To model the liquid helium slosh effects, computational fluid dynamics (CFD) results' were obtained, and used to develop a dynamic model of the slosh effects. The flexible body and slosh effects were incorporated separately into the TREETOPS simulation, which places the vehicle in a 650 km circular polar orbit and subjects the spacecraft to realistic environmental disturbances and sensor error quantities. In all of the analysis conducted in this study the spacecraft is pointed at an inertially fixed guide star (GS) and is rotating at a constant rate about this line of sight.

Francis, Ronnie↗
DOE OSTI2020

Liquid Structure and Transport Properties of the Deep Eutectic Solvent Ethaline

A range of techniques including physical property measurements, neutron scattering experiments, ab initio molecular dynamics, and classical molecular dynamics simulations are used to probe the structural, thermodynamic, and transport properties of a deep eutectic solvent comprised of a 1:2 molar ratio of choline chloride and ethylene glycol. This mixture, known as Ethaline, has many desirable properties for use in a range of applications, and therefore, understanding its liquid structure and transport properties is of interest. Simulation results are able to capture experimental densities, diffusivities, viscosities, and structure factors extremely well. Here, the solvation environment is dynamic and dominated by different hydrogen bonding interactions. Dynamic heterogeneities resulting from hydrogen bonding interactions are quantified. Rotational dynamics of molecular dipole moments of choline and ethylene glycol are computed and found to exhibit a fast and slow mode.

25 ENERGY STORAGE↗
DOE OSTI2019

Halogen Bond Structure and Dynamics from Molecular Simulations

Halogen bonding has emerged as an important noncovalent interaction in a myriad of applications, including drug design, supramolecular assembly, and catalysis. Current understanding of the halogen bond is informed by electronic structure calculations on isolated molecules and/or crystal structures that are not readily trans- ferable to liquids and disordered phases. To address this issue, we present a first-principles simulation-based approach for quantifying halogen bonds in molecular systems rooted in an understanding of nuclei-nuclei and electron-nuclei spatial correlations. We then demonstrate how this approach can be used to quantify the structure and dynamics of halogen bonds in condensed phases, using solid and liquid molecular chlorine as prototypical examples with high concentrations of halogen bonds. We close with a discussion of how the knowledge generated by our first-principles approach may inform the development of classical empirical models, with a consistent representation of halogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2016

Evaluation of Methods for Molecular Dynamics Simulation of Ionic Liquid Electric Double Layers

We investigate how systematically increasing the accuracy of various molecular dynamics modeling techniques influences the structure and capacitance of ionic liquid electric double layers (EDLs). The techniques probed concern long-range electrostatic interactions, electrode charging (constant charge versus constant potential conditions), and electrolyte polarizability. Our simulations are performed on a quasi-two-dimensional, or slab-like, model capacitor, which is composed of a polarizable ionic liquid electrolyte, [EMIM][BF4], interfaced between two graphite electrodes. To ensure an accurate representation of EDL differential capacitance, we derive new fluctuation formulas that resolve the differential capacitance as a function of electrode charge or electrode potential. The magnitude of differential capacitance shows sensitivity to different long-range electrostatic summation techniques, while the shape of differential capacitance is affected by charging technique and the polarizability of the electrolyte. For long-range summation techniques, errors in magnitude can be mitigated by employing two-dimensional or corrected three dimensional electrostatic summations, which lead to electric fields that conform to those of a classical electrostatic parallel plate capacitor. With respect to charging, the changes in shape are a result of ions in the Stern layer (i.e. ions at the electrode surface) having a higher electrostatic affinity to constant potential electrodes than to constant charge electrodes. For electrolyte polarizability, shape changes originate from induced dipoles that soften the interaction of Stern layer ions with the electrode. The softening is traced to ion correlations vertical to the electrode surface that induce dipoles that oppose double layer formation. In general, our analysis indicates an accuracy dependent differential capacitance profile that transitions from the characteristic camel shape with coarser representations to a more diffuse profile with finer representations.

Haskins, Justin B.↗
DOE OSTI2019

Experimental and theoretical investigations on the adherent behaviors of high viscosity liquid: The effect of surface topography

Wetting test and classical molecular dynamics (MD) simulations were employed to investigate the adherent behaviors of hydroxyl-terminated polybutadiene (HTPB), a typical high viscosity liquid widely used as a binder in rocket motor propellants, onto the copper (Cu) surfaces with different topographies. Experimental data show that the microstructures protruding above the substrate surfaces can be ‘sensed’ by the HTPB droplet, which has been indicated by the smaller contact angles and higher interface tension for this specific liquid on the rough surfaces (featured with sinusoidal structures or square pillars) than that on the smooth surface. Simulation results reveal the atomic details of spreading process of HTPB chains, with diverse diffusion propensities presented on different surfaces. The HTPB droplet spreads widely on the smooth surface, exhibiting a roughly isotropic trend. On the contrary, the state of this high viscosity liquid on the sinusoidal-structured surface is featured by wide contact diffusion along the run of groove, but relatively restricted extension in the direction perpendicular to the groove, as a result of the barriers exerted by the nearest neighbouring peaks. The existence of nanoscale pillars increases the exterior surface area of Cu substrate, therefore the HTPB chains can penetrate deep to envelop the peripheries of the pillars, forming abundant direct contacts with Cu surface and producing a highest HTPB–Cu interaction energy, which well accords with the experimental results about the adherent strength of HTPB.

Wu, Chunya↗
DOE OSTI2019

Influence of Counterion Structure on Conductivity of Polymerized Ionic Liquids

We performed long-time all-atom molecular dynamics simulations of cationic polymerized ionic liquids with eight mobile counterions, systematically varying size and shape to probe their influence on the decoupling of conductivity from polymer segmental dynamics. We demonstrated rigorous identification of the dilatometric glass-transition temperature ( T g ) for polymerized ionic liquids using an all-atom force field. Polymer segmental relaxation rates are presumed to be consistent for different materials at the same glass-transition-normalized temperature ( T g / T ), allowing us to extract a relative order of decoupling by examining conductivity at the same T g / T . Size, or ionic volume, cannot fully explain decoupling trends, but within certain geometric and chemical-specific classes, small ions generally show a higher degree of decoupling. This size effect is not universal and appears to be overcome when structural results reveal substantial coordination delocalization. Here, we also reveal a universal inverse correlation between ion-association structural relaxation time and absolute conductivity for these polymerized ionic liquids, supporting the ion-hopping interpretation of ion mobility in polymerized ionic liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Stability of Ligands on Nanoparticles Regulating the Integrity of Biological Membranes at the Nano–Lipid Interface

When nanoparticles interact with cellular or organelle membranes, the coating ligands are known to affect the integrity of the membranes, which regulate cell death and inflammation. However, the molecular mechanisms of this modulation remain unresolved. Here, we use synchrotron X-ray liquid surface scattering and molecular dynamics simulations to study interface structures between phospholipids and gold nanorods (AuNRs) coated by surfactant and polyelectrolyte. These ligands are two types of widely used surface modification with different self-assembled structures and stabilities on the surface of nanoparticles. We reveal distinct mechanisms of the ligand stability in disrupting membrane integrity. We find that cationic surfactant ligand cetyltrimethylammonium bromide (CTAB) detaches from AuNRs and inserts into phospholipids, resulting in reduced membrane thickness by compressing the phospholipids to align with the shorter ligand. Conversely, the cationic polyelectrolyte ligand poly(diallyldimethylammonium chloride) (PDC) is more stable on AuNRs; although it adsorbs onto the membrane, it does not cause much impairment. The distinct coating ligand interactions with phospholipids are further verified by cellular responses including impaired lysosomal membranes and triggered inflammatory effects in macrophages. Together, the quantitative analysis of interface structures elucidates key bio-nano interactions and highlights the importance of surface ligand stability for safety and rational design of nanoparticles.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Molecular Simulation of Covalent Bond Dynamics in Liquid Silicon

Many atomic liquids can form transient covalent bonds reminiscent of those in the corresponding solid states. These directional interactions dictate many important properties of the liquid state, necessitating a quantitative, atomic-scale understanding of bonding in these complex systems. A prototypical example is liquid silicon, wherein transient covalent bonds give rise to local tetrahedral order and consequent nontrivial effects on liquid-state thermodynamics and dynamics. To further understand covalent bonding in liquid silicon, and similar liquids, we present an ab initio-simulation-based approach for quantifying the structure and dynamics of covalent bonds in condensed phases. Through the examination of structural correlations among silicon nuclei and maximally localized Wannier function centers, we develop a geometric criterion for covalent bonds in liquid Si. We use this to monitor the dynamics of transient covalent bonding in the liquid state and estimate a covalent bond lifetime. We compare covalent bond dynamics to other processes in liquid Si and similar liquids and suggest experiments to measure the covalent bond lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Bergman-type medium range order in amorphous Zr77Rh23 alloy studied by ab initio molecular dynamics simulations

In recent years, some arguments about the existence of medium-range order (MRO) in the Zr-Rh system have been put forward. However, research on the structural features of the Zr-Rh binary alloy at the atomic level is still lacking. This study uses ab initio molecular dynamics simulations to systematically study the local structures of Zr77Rh23 from the liquid to the glassy states. Pair correlation function (PCF), coordination number (CN), Honeycutt–Anderson(HA) index, bond-angle distribution functions, and the Voronoi tessellation method are used to reveal a clear icosahedral-like configuration in the amorphous Zr77Rh23 alloy. It is noteworthy that the splitting in the second peak of the partial PDF implies the existence of a medium range order (MRO) in the Zr77Rh23 system. We obtain the local order in three-dimensional atomic density distributions by using a new atomistic cluster alignment (ACA) method. Interestingly, a Bergman-type MRO is observed in the glassy Zr77Rh23. Furthermore, the spatial distribution and connections of icosahedral-like clusters are shown to further demonstrate the MRO network. Our findings shed light on the nature of atomic local structures of amorphous Zr77Rh23 alloy and have important implications to understanding the formation of various MROs in metallic glasses.

Guo, Y. R.↗
DOE OSTI2026

How alkyl branching shapes structure in imidazolium and pyrrolidinium NTf 2 ionic liquids

High-energy X-ray scattering experiments and molecular dynamics (MD) simulations were carried out on ionic liquids (ILs) consisting of 1-alkyl-3-methylimidazolium and 1-alkyl-1-methylpyrrolidinium cations. These cations were paired with bis(trifluoromethylsulfonyl)amide anions and identical alkyl tails were used for both cationic species. The goal of this work is to investigate how the nanoscale structure of the ionic liquid changes with the length and with the degree of branching of the alkyl tail, for ILs having a common anion. We investigate spatial correlations in the intermolecular region, focusing on the intrinsic charge-charge interactions that characterize all ionic liquids, as well as the nanoscale domain segregation that is present in IL species with significant nonpolar components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Temperature-Dependent Properties of Molten Li 2 BeF 4 Salt Using Ab Initio Molecular Dynamics

Molten lithium tetrafluoroberyllate (Li 2 BeF 4 ) salt, also known as FLiBe, with a 2:1 mixture of LiF and BeF 2 is being proposed as a coolant and solvent in advanced nuclear reactor designs, such as the molten salt reactor or the fluoride salt cooled high-temperature reactor. We present the results on the structure and properties of FLiBe over a wide range of temperatures, 0–2000 K, from high-throughput ab initio molecular dynamics simulation using a supercell model of 504 atoms. The variations in the local structures of solid and liquid FLiBe with temperature are discussed in terms of a pair distribution function, coordination number, and bond angle distribution. The temperature-dependent electronic structure and optical and mechanical properties of FLiBe are calculated. The optical and mechanical property results are reported for the first time. The results above and below the melting temperature (~732 K) are compared with the experimental data and with data for crystalline FLiBe. The electronic structure and interatomic bonding results are discussed in correlation with the mechanical strength. A novel concept of total bond order density (TBOD), an important quantum mechanical parameter, is used to characterize the internal cohesion and strength in the simulated models. The results show a variation in the rate of change in properties in solid and liquid phases with anomalous behavior across the melting region. The observed trend is the decrease in mechanical strength, band gap, and TBOD in a nonlinear fashion as a function of temperature. The refractive index shows a surprising minimum at 850 K, among the tested temperatures, which lies above the melting point. These findings provide a new platform to understand the interplay between the temperature-dependent structures and properties of FLiBe salt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Structure of Ionic Liquids Under Nanoconfinement in Energy Applications

Room temperature ionic liquids are widely regarded as the most promising next-generation electrolyte for energy storage. However, their structure, which dictates a device’s ability to store electrical charge, at interfaces and under nanoconfinement remains poorly understood. By integrating cutting-edge X-ray characterization tools, advanced nanocarbon synthesis and nanofabrication, and ab initio molecular dynamics simulation, this work probed with spatial and chemical detail the structure of ionic liquids confined in carbon nanopores. This provides mechanistic understanding toward optimizing ionic liquid-solid electrode interfaces and developing design rules that could dramatically increasing capacity and charge/discharge rates of future supercapacitor devices. Nevertheless, the ability to probe ions at interfaces is also critical in other areas such as batteries, desalination, electrocatalysis, and biological and chemical sensors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spin dynamics of the antiferromagnetic Heisenberg model on a kagome bilayer

We research the spin dynamics of a classical Heisenberg antiferromagnet with nearest-neighbor interactions on a quasi-two-dimensional kagome bilayer. This geometrically frustrated lattice consists of two kagome layers connected by a triangular-lattice linking layer. By combining Monte Carlo with precessional spin dynamics simulations, we compute the dynamical structure factor of the classical spin liquid in the kagome bilayer and investigate the thermal and dilution effects. While the low-frequency and long-wavelength dynamics of the cooperative paramagnetic phase is dominated by spin diffusion, weak magnon excitations persist at higher energies, giving rise to the half-moon pattern in the dynamical structure factor. In the presence of spin vacancies, the dynamical properties of the diluted system can be understood within the two-population picture. The spin diffusion of the “correlated” spin clusters is mainly driven by the zero-energy weather-vane modes, giving rise to an autocorrelation function that decays exponentially with time. On the other hand, the diffusive dynamics of the quasifree “orphan” spins leads to a distinctive longer-time power-law tail in the autocorrelation function. We discuss the implications of our work for the glassy behaviors observed in the archetypal frustrated magnet SrCr 9p Ga 12-9 pO 19 (SCGO).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗