Higher-order-mode effects on the aperture admittance of a rectangular waveguide covered with dielectric and plasma slabs
Fourier integration of electrical impedance expressions for nonlossy dielectric and lossy plamas
Cockrell, C. R.↗
SEARCH · Search NASA
Results for “Lossy Dielectrics”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Snow and ice surfaces measured by the Nimbus 5 microwave spectrometer
The 22.2- and 31.4-GHz channels of the microwave spectrometer on board the Nimbus 5 earth observatory satellite provide information about the global distribution and character of various types of snow and ice. Observations for the winter and summer of 1973 are presented for both polar regions. Well-defined spectral signatures are found for snow, sea ice, and land ice in Greenland and Antarctica. A simple model with subsurface temperature gradients in a lossy homogeneous dielectric does not account for the observations; internal scattering effects appear to play a dominant role.
Kunzi, K. F.↗
Electromagnetic backscattering from a layer of vegetation - A discrete approach
Electromagnetic backscattering from a layer of vegetation over a flat lossy ground is studied. The vegetated region is composed of leaves which are modeled by lossy circular dielectric discs with prescribed orientation statistics. The mean field in the layer is computed by using the Foldy approximation and a two-variable technique which is valid for small fractional volume. Simple expressions are given for the skin depth of the mean wave. Following this, the distorted Born approximation is used to calculate the co-polarized and cross polarized backscattering coefficients. These are then computed as a function of angle of incidence for different layer depths and leaf configurations.
Lang, R. H.↗
Accuracy and Limitations of Microwave Cavity Perturbation Theory
Explore the source record for details and available documents.
frequency↗
Propagation Model for FINDER Radar
No abstract available
Finding Individuals in Disaster and Emergency Resp↗
Charge-Dissipative Electrical Cables
Electrical cables that dissipate spurious static electric charges, in addition to performing their main functions of conducting signals, have been developed. These cables are intended for use in trapped-ion or ionizing-radiation environments, in which electric charges tend to accumulate within, and on the surfaces of, dielectric layers of cables. If the charging rate exceeds the dissipation rate, charges can accumulate in excessive amounts, giving rise to high-current discharges that can damage electronic circuitry and/or systems connected to it. The basic idea of design and operation of charge-dissipative electrical cables is to drain spurious charges to ground by use of lossy (slightly electrically conductive) dielectric layers, possibly in conjunction with drain wires and/or drain shields (see figure). In typical cases, the drain wires and/or drain shields could be electrically grounded via the connector assemblies at the ends of the cables, in any of the conventional techniques for grounding signal conductors and signal shields. In some cases, signal shields could double as drain shields.
Kolasinski, John R.↗
Polarization effects in silicon-clad optical waveguides
By changing the thickness of a semiconductor cladding layer deposited on a planar dielectric waveguide, the TE or TM propagating modes may be selectively attenuated. This polarization effect is due to the periodic coupling between the lossless propagating modes of the dielectric slab waveguide and the lossy modes of the cladding layer. Experimental tests involving silicon claddings show high selectivity for either polarization.
Carson, R. F.↗
Microwave inversion of leaf area and inclination angle distributions from backscattered data
The backscattering coefficient from a slab of thin randomly oriented dielectric disks over a flat lossy ground is used to reconstruct the inclination angle and area distributions of the disks. The disks are employed to model a leafy agricultural crop, such as soybeans, in the L-band microwave region of the spectrum. The distorted Born approximation, along with a thin disk approximation, is used to obtain a relationship between the horizontal-like polarized backscattering coefficient and the joint probability density of disk inclination angle and disk radius. Assuming large skin depth reduces the relationship to a linear Fredholm integral equation of the first kind. Due to the ill-posed nature of this equation, a Phillips-Twomey regularization method with a second difference smoothing condition is used to find the inversion. Results are obtained in the presence of 1 and 10 percent noise for both leaf inclination angle and leaf radius densities.
Lang, R. H.↗
High frequency scattering by a thin dielectric slab
The geometrical theory of diffraction (GTD) is applied to the problem of a source in the presence of a three-dimensional thin dielectric slab. It is assumed that the reflection and transmission properties of the slab are known, and the slab is not lossy and/or multilayered. Two-dimensional thin dielectric layer scattering is analyzed when diffraction emanates from a single point, the source is not near the slab, and random energy approaching tangentially due to transmission is negligible. Coefficients are obtained for the scattering and the GTD solution is extended to the three dimensional case after development of a ray fixed coordinate system. The results are applied to a half wavelength dipole mounted above a square polystyrene covered ground plane.
Burnside, W. D.↗
Surface-polaritonlike waves guided by thin, lossy metal films
Surface-plasmon polaritons guided by thin, lossy metallic films bounded by dissimilar dielectric media are investigated. New solutions to the dispersion relation are found, representing waves that are leaky (radiative) in one of the dielectrics. The new waves are interpreted in terms of the coupling of a damped surface plasmon at one interface with continuum modes at the other. Their excitation by end-fire coupling techniques is suggested.
Stegeman, G. I.↗
Modified filter prevents conduction of microwave signals along high-voltage power supply leads
Very lossy powdered iron material, in the lining of a polyester resin, replaces the dielectric material in the short coaxial transmission line of a simple filter. The lossy material absorbs microwave signals along high voltage power supply leads.
Mathison, R. P.↗
Millimeter-wave passive ultra-compact imaging technology for synthetic vision & mobile platforms
Substantial technical progress was made on all of the three high-risk subsystems of this program. The subsystems include dielectric antenna, G-band receiver, and electro-optic image processor. Progress is approximately on-schedule for both the receiver and the electro-optic processor development, while greater than anticipated challenges have been discovered in the dielectric antenna development. Much of the information in this report was covered in greater detail in the One-Year Review Meeting held at TTC on 22 February 1996. The performance goals of the dielectric antenna project are: Scan Angle -- 20 deg. desired; Loss -- 6 dB end to end (3 dB average); Frequency -- 206-218 GHz (6% bandwidth); Beam width -- 0.25 deg.; and Length -- 12 inches. The scan angle requirement was chosen to satisfy the needs of aircraft pilots. This requirement, coupled with the presently limited bandwidth processors (1 GHz state-of-the-art and 12 GHz in development in this program) forces the antenna to be dielectric (high scan angle air-filled waveguide-based antennas would be too lossy and their performance would vary too much as a function of frequency). A high dielectric constant (e.g., 10) was initially chosen for the dielectric material. This choice lead to the following fabrication challenges: total thickness variation (TTV) tolerance is 1 micrometer; coupler spacing tolerance is 1 micrometer; width tolerance is larger, but unknown, and the surfaces must have mirror finish. Also of importance is the difficulty in obtaining raw materials that satisfy the overall length requirement of 12 inches while simultaneously satisfying the above specifications.
Olsen, Randall↗
Measurement and analysis of periodic coupling in silicon-clad planar waveguides
Computer modeling studies indicate that planar dielectric waveguides clad with silicon exhibit a damped periodic oscillation in their attenuation and phase characteristics. The effect is due to a periodic coupling between the lossy, guided modes in the silicon film and the TE0 mode of the dielectric waveguide. Experimental confirmation of the periodic coupling for a wavelength of 632.8 nm is presented. Propagation characteristics for a wavelength of 1150 nm were investigated for application in integrated optical modulators. Frequency filtering properties of silicon-clad waveguides are also examined and it is shown that the silicon thickness controls the filter response curve.
Mcwright, G. M.↗
The computation of the k factor for lossy materials around resonance
An important property of a piezoelectric material for practical applications is its ability to generate and to detect stress waves, i.e. to convert electrical energy into mechanical energy and vice versa. As it is well known, the electromechanical coupling factor k fully characterize this energy conversion under static conditions. In this work we show that the definition of kw as ratio of energies can also be extended to lossy materials (kw); the losses are accounted by considering comlex quantities for the elastic, dielectric and piezoelectric material constants.
coupling coefficients↗
Noise Temperature of a Lossy Flat Plate Reflector for the Elliptically Polarized Wave Case
This article presents the derivation of equations necessary to calculate noise temperature of a lossy flat plate reflector. Reflector losses can be due to metallic surface resistivity and multi-layer dielectric sheets including thin layer of plating, paint, and primer on the reflector surface.
noise↗
Numerical methods for analyzing electromagnetic scattering
Attenuation properties of the normal modes in an overmoded waveguide coated with a lossy material were analyzed. It is found that the low-order modes, can be significantly attenuated even with a thin layer of coating if the coating material is not too lossy. A thinner layer of coating is required for large attenuation of the low-order modes if the coating material is magnetic rather than dielectric. The Radar Cross Section (RCS) from an uncoated circular guide terminated by a perfect electric conductor was calculated and compared with available experimental data. It is confirmed that the interior irradiation contributes to the RCS. The equivalent-current method based on the geometrical theory of diffraction (GTD) was chosen for the calculation of the contribution from the rim diffraction. The RCS reduction from a coated circular guide terminated by a PEC are planned schemes for the experiments are included. The waveguide coated with a lossy magnetic material is suggested as a substitute for the corrugated waveguide.
Lee, S. W.↗
Finite difference time domain electromagnetic scattering from frequency-dependent lossy materials
Four different FDTD computer codes and companion Radar Cross Section (RCS) conversion codes on magnetic media are submitted. A single three dimensional dispersive FDTD code for both dispersive dielectric and magnetic materials was developed, along with a user's manual. The extension of FDTD to more complicated materials was made. The code is efficient and is capable of modeling interesting radar targets using a modest computer workstation platform. RCS results for two different plate geometries are reported. The FDTD method was also extended to computing far zone time domain results in two dimensions. Also the capability to model nonlinear materials was incorporated into FDTD and validated.
Luebbers, Raymond J.↗