Search NASA⌕ Search

SEARCH · Search NASA

Results for “MBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Defects in Arsenic Implanted р{sup +}–n- and n{sup +}–p- Structures Based on MBE Grown CdHgTe Films

Complex studies of the defect structure of arsenic-implanted (with the energy of 190 keV) Cd{sub x}Hg{sub 1–x}Te (x = 0.22) films grown by molecular-beam epitaxy are carried out. The investigations were performed using secondary-ion mass spectroscopy, transmission electron microscopy, optical reflection in the visible region of the spectrum, and electrical measurements. Radiation donor defects were studied in n{sup +}–p- and n{sup +}–n-structures obtained by implantation and formed on the basis of p-type and n-type materials, respectively, without activation annealing. It is shown that in the layer of the distribution of implanted ions, a layer of large extended defects with low density is formed in the near-surface region followed by a layer of smaller extended defects with larger density. A different character of accumulation of electrically active donor defects in the films with and without a protective graded-gap surface layer has been revealed. It is demonstrated that p{sup +}–n- structures are formed on the basis of n-type material upon activation of arsenic in the process of postimplantation thermal annealing with 100% activation of impurity and complete annihilation of radiation donor defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sb[subscript 2]Te[subscript 3] and Bi[subscript 2]Te[subscript 3] Thin Films Grown by Room-Temperature MBE

Sb{sub 2}Te3 and Bi{sub 2}Te3 thin films were grown on SiO{sub 2} and BaF{sub 2} substrates at room temperature using molecular beam epitaxy. Metallic layers with thicknesses of 0.2 nm were alternately deposited at room temperature, and the films were subsequently annealed at 250 C for 2 h. x-Ray diffraction and energy-filtered transmission electron microscopy (TEM) combined with high-accuracy energy-dispersive x-ray spectrometry revealed stoichiometric films, grain sizes of less than 500 nm, and a texture. High-quality in-plane thermoelectric properties were obtained for Sb{sub 2}Te3 films at room temperature, i.e., low charge carrier density (2.6 x 10{sup 19} cm{sup -3}, large thermopower (130 {micro}V K{sup -1}), large charge carrier mobility (402 cm{sup 2} V{sup -1} s{sup -1}), and resulting large power factor (29 {micro}W cm{sup -1} K{sup -2}). Bi{sub 2}Te3 films also showed low charge carrier density (2.7 x 10{sup 19} cm{sup -3}), moderate thermopower (-153 {micro}V K{sup -1}), but very low charge carrier mobility (80 cm{sup 2} V{sup -1} s{sup -1}), yielding low power factor (8 {micro}W cm{sup -1} K{sup -2}). The low mobilities were attributed to Bi-rich grain boundary phases identified by analytical energy-filtered TEM.

36 MATERIALS SCIENCE↗

Infrared MBE-Grown HgCdTe Focal Plane Arrays and Cameras After High Energy Neutron Irradiation

HgCdTe is one of the most important materials for the fabrication of infrared detectors and focal plane arrays (FPAs) deployed in environments where high-energy particles, such as protons and neutrons, are present. We designed and fabricated HgCdTe-based FPAs that can be used in high neutron radiation environments and we measured their characteristics. The influence of the radiation on the infrared FPAs and cameras is investigated. HgCdTe material and devices are capable of maintaining high performances in a high energy neutron irradiation environment. For MWIR FPA directly facing a $2.59 × 10^8$ n/cm$^2$ s neutron flux beam (with the highest energy 66 MeV) for 1 h, the noise equivalent differential temperature (NEDT) increased ~8 times after irradiation. However, NEDT decreased to 33 mK (compared to the original value of 21 mK) after one warming-up (to room temperature) and cooling-down cycle. The NEDT for the MWIR FPAs mounted parallel to the beam did not degrade (16 mK and 28 mK before irradiation, changed to 18 mK and 26 mK after irradiation, respectively).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Room-temperature MBE deposition, thermoelectric properties, and advanced structural characterization of binary Bi[subscript 2]Te[subscript 3] and Sb[subscript 2]Te[subscript 3] thin films

Sb{sub 2}Te{sub 3} and Bi{sub 2}Te{sub 3} thin films were grown at room temperature on SiO{sub 2} and BaF{sub 2} substrates using molecular beam epitaxy. A layer-by-layer growth was achieved such that metallic layers of the elements with 0.2 nm thickness were deposited. The layer structure in the as-deposited films was confirmed by X-ray diffraction and was seen more clearly in Sb{sub 2}Te{sub 3} thin films. Subsequent annealing was done at 250 C for 2 h and produced the Sb{sub 2}Te{sub 3} and Bi{sub 2}Te{sub 3} crystal structure as confirmed by high-energy X-ray diffraction. This preparation process is referred to as nano-alloying and it was demonstrated to yield single-phase thin films of these compounds. In the thin films a significant texture could be identified with the crystal c axis being almost parallel to the growth direction for Sb{sub 2}Te{sub 3} and tilted by about 30{sup o} for Bi{sub 2}Te{sub 3} thin films. In-plane transport properties were measured for the annealed films at room temperature. Both films yielded a charge carrier density of about 2.6 x 10{sup 19} cm{sup -3}. The Sb{sub 2}Te{sub 3} films were p-type, had a thermopower of +130 {micro}V K{sup -1}, and surprisingly high mobilities of 402 cm{sup 2} V{sup -1} s{sup -1}. The Bi{sub 2}Te{sub 3} films were n-type, showed a thermopower of -153 {micro}V K{sup -1}, and yielded significantly smaller mobilities of 80 cm2 V{sup -1} s{sup -1}. The chemical composition and microstructure of the films were investigated by transmission electron microscopy (TEM) on cross sections of the thin films. The grain sizes were about 500 nm for the Sb{sub 2}Te{sub 3} and 250 nm for the Bi{sub 2}Te{sub 3} films. In the Bi{sub 2}Te{sub 3} thin film, energy-filtered TEM allowed to image a Bi-rich grain boundary phase, several nanometers thick. This secondary phase explains the poor mobilities of the Bi{sub 2}Te{sub 3} thin film. With these results the high potential of the nano-alloying deposition technique for growing films with a more complex layer architecture is demonstrated.

36 MATERIALS SCIENCE↗

Effects of in-situ UV irradiation on the uniformity and optical properties of GaAsBi epi-layers grown by MBE

In-situ UV illumination influences the incorporation dynamics of bismuth adatom in GaAs. Here we use the inherent variation of the fluence across the sample to explore the role of the incident irradiation. With illumination it is found that steady state growth processes are achieved more quickly resulting in more abrupt interfaces, as well as uniform GaAs 1-x Bi x epi-layers. Comparisons of low temperature photoluminescence spectra show an increasing density of clusters of incorporated bismuth atoms with decreasing incident fluence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved growth of GaN layers on ultra thin silicon nitride/Si (1 1 1) by RF-MBE

High-quality GaN epilayers were grown on Si (1 1 1) substrates by molecular beam epitaxy using a new growth process sequence which involved a substrate nitridation at low temperatures, annealing at high temperatures, followed by nitridation at high temperatures, deposition of a low-temperature buffer layer, and a high-temperature overgrowth. The material quality of the GaN films was also investigated as a function of nitridation time and temperature. Crystallinity and surface roughness of GaN was found to improve when the Si substrate was treated under the new growth process sequence. Micro-Raman and photoluminescence (PL) measurement results indicate that the GaN film grown by the new process sequence has less tensile stress and optically good. The surface and interface structures of an ultra thin silicon nitride film grown on the Si surface are investigated by core-level photoelectron spectroscopy and it clearly indicates that the quality of silicon nitride notably affects the properties of GaN growth.

36 MATERIALS SCIENCE↗

Strain-Mediated Sn Incorporation and Segregation in Compositionally Graded Ge 1– x Sn x Epilayers Grown by MBE at Different Temperatures

We investigated the process of Sn incorporation and surface segregation for compositionally graded Ge 1–x Sn x epilayers grown on high-quality Ge (001) substrates. Here, the growth resulted in pseudomorphic GeSn layers with a ~6% maximal Sn fraction at a constant substrate temperature. The maximal fraction of Sn was increased to 9.0% when the growth temperature was continuously lowered while increasing the Sn flux. The analysis of surface droplets and SIMS profiles of elemental composition give evidence of Sn rejection during the growth, potentially associated with a critical energy of elastic strain. The intentional reduction of the coherent strain by decreasing the Sn flux near the sample surface has been shown to trap a higher fraction of Sn in the Ge 1–x Sn x layer and lower surface segregation. Our results demonstrate that strain relief by misfit dislocations in the compositionally graded layer is inhibited, which leads to Sn segregation. Specifically, the compressive strain in the graded Ge 1–x Sn x epilayer is effectively “zero” near the interface with the Ge substrate and increases up to about –1.5 × 10 –2 near the surface. Thus, although the nucleation of a dislocation may reduce the compressive strain for the top region of the epilayer, it is not beneficial for the bottom region.

42 ENGINEERING↗

Strain Relaxation and Relative Defect Density with Thickness in MBE-Grown Ge 0.85 Sn 0.15 on Ge(001)

Germanium–tin (GeSn) alloys are emerging as promising materials for mid-infrared optoelectronics and silicon-compatible photonic devices, owing to their tunable direct bandgap. However, the growth of high-quality GeSn films with high Sn content remains challenging due to strain-induced defect formation. In this study, we investigate the role of film thickness on strain-induced relaxation, defect density, and Sn segregation. A series of five samples with varying thicknesses and ∼15% Sn-containing GeSn layers were grown, ranging from the critical thickness for strain relaxation to the onset of Sn segregation. All GeSn samples were analyzed using X-ray diffraction reciprocal space mapping (XRD-RSM) to explore the evolution of strain-induced relaxation as a function of thickness. Photoluminescence measurements reveal that increasing the GeSn thickness enhances strain relaxation while reducing defect-related emission, indicating a decrease in effective defect density prior to reaching the threshold thickness of GeSn layer. At a thickness of ∼150 nm, the GeSn layer shows the onset of Sn segregation, evident in the XRD-RSM spectrum, marking the threshold thickness for Sn segregation. This work defines an effective growth window in terms of thickness (35 to 150 nm) for fabricating relaxed, defect-suppressed GeSn layers with 15% Sn content. These findings emphasize the crucial role of thickness control in balancing strain relaxation and defect suppression, advancing the fabrication of high-quality, high Sn-content relaxed GeSn using molecular beam epitaxy.

Defects↗

MBE Growth of Graded Structures for Polarized Electron Emitters

SVT Associates, in collaboration with SLAC, has investigated two novel photocathode design concepts in an effort to increase polarization and quantum efficiency. AlGaAsSb/GaAs superlattice photocathodes were fabricated to explore the effect of antimony on device operation. In the second approach, an internal electrical field was created within the superlattice active layer by varying the aluminum composition in AlGaAs/GaAs. A 25% increase in quantum efficiency as a result of the gradient was observed.

36 MATERIALS SCIENCE↗

MBE Growth of GaAs Whiskers on Si Nanowires

We present the growth of GaAs nanowhiskers by molecular beam epitaxy on Si (111) nanowires grown by low-pressure chemical vapor deposition. The whiskers grow in the wurtzite phase, along the [0001] direction, on the {l_brace}112{r_brace} facets of the Si nanowire, forming a star-like six-fold radial symmetry. The photoluminescence shows a 30 meV blue shift with respect to bulk GaAs, additionally a GaAs/AlAs core-shell heterostructure shows increased luminescence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zn{sub 1-x}Mn{sub x}Te-based diluted magnetic semiconductor nanowire structures grown by MBE

We report on the catalytically enhanced molecular beam epitaxial growth of Zn{sub 1-x}Mn{sub x}Te-based nanowire structures, with manganese content up to x = 0.6, and on their basic structural and optical properties. The measurements that have been carried out confirm the incorporation of Mn{sup 2+} ions in the cation substitutional sites of ZnTe lattice.

36 MATERIALS SCIENCE↗

Surface Enhanced Raman Spectroscopy of Pyridine on CdSe/ZnBeSe Quantum Dots Grown by MBE

Using Surface Enhanced Raman Spectroscopy (SERS), we observed Raman enhancements (104-105) for pyridine molecules adsorbed on a II-VI semiconductor CdSe/ZnBeSe sample of uncapped self-assembled quantum dots produced by molecular beam epitaxy. When a monolayer of pyridine is adsorbed on these structures, excitation at 488 nm produces intense Raman spectra a very large enhancement of the a1, b1 and b2 modes. This indicates the presence of charge-transfer as a contributor to the enhacement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗