Search NASA⌕ Search

SEARCH · Search NASA

Results for “MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Mechanism of electrochemical lithiation of a metal-organic framework without redox-active nodes

Metal-organic frameworks (MOFs) have many potential uses for separations, storage, and catalysis, but their use as intercalation hosts for batteries has been scarce. In this article, we examine the mechanism of Li insertion in a MOF to provide guidance to future design efforts in this area. As a model system, we choose UiO-66, a MOF with the formula (Zr{sub 6}O{sub 4}(OH){sub 4}){sub 4}(1,4-benzenedicarboxylate){sub 6}, as an electrode material for lithium-ion batteries; this MOF is of special interest because the zirconium is not redox active. We report both quantum mechanical characterization of the mechanism and experimental studies in which the material is synthesized as nanoparticles to reduce diffusion lengths for lithium ions and increase the contact area with a conductive carbon phase. The calculated changes in the IR spectra of UiO-66 and lithiated UiO-66 are consistent with the experimental FTIR results. We found experimentally that this MOF can maintain a specific discharge capacity of at least 118 mAh/g for 30 lithiation and delithiation cycles at a rate of C/5, exhibiting good cyclability. Density functional electronic structure calculations show that the charge transfer during lithiation is mainly from Li to node oxygens and carboxylate oxygens, that is, it involves anions rather than cations or aromatic rings, and they provide a mechanistic understanding of the potential for increased Li capacity because the theoretical capacity of UiO-66 with Li at the oxygens in the metal oxide nodes and the carboxylate linkers is more than 400 mAh/g. The lithiation process greatly decreases the bandgap of UiO-66, which is expected to increase its electronic conductivity. The electrode material was also characterized by X-ray diffraction and scanning electron microscopy, which were consistent in confirming that smaller particle sizes were obtained in lower-temperature syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Numerical simulation of the hot-tail runaway electron production mechanism using CQL3D and comparison with Smith–Verwichte analytical model

Abstract The hot-tail mechanism of runaway electron (RE) production (Harvey et al 2000 Phys. Plasmas 7 4590) is the primary source of RE in the case of rapidly cooling tokamak plasma. Quantifying this mechanism is very important as it can provide most of the post-thermal-quench (TQ) current, or a seed current for the secondary source of RE through the avalanche mechanism. An analytic model which omits pitch-angle scattering is often used in literature for estimating the hot-tail RE density (Smith and Verwichte 2008 Phys. Plasmas 15 072502). In the present study, we use the CQL3D bounce-averaged Fokker–Planck code (Harvey and McCoy 1992 Proc. IAEA Technical Committee Meeting on Advances in Simulation and Modeling of Thermonuclear Plasmas p 527) to test the limits of validity of the model. In particular, we examine the cases of Z = 1 and Z = 18 ions, for sets of different initial temperature, density, electric field and the characteristic time of temperature decay. We show that for Z = 1 plasma, the ratio of RE density computed by CQL3D to that estimated from the model is within 0.6–6.0 in studied cases. For the Z = 18 case, this factor is systematically a much smaller number, typically 0.02–0.6. We suggest a simple correction to the model that narrows down the range of this ratio to 0.3–3.8 in all of the cases, including Z = 1 and Z = 18 plasmas.

Physics↗
DOE OSTI2021

Mechanical quantum sensing in the search for dark matter

Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Here, searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics

ABSTRACT Zirconia‐toughened alumina (ZTA) ceramics with high mechanical properties were sintered by hot‐pressing method using SiC particles (SiCp) and SiC whiskers (SiCw) as the reinforcing agents simultaneously. The influences of sintering temperature, SiCp, and SiCw contents on the microstructure and mechanical properties of ZTA ceramics were investigated. It was found that both SiCp and SiCw could contribute to grain refinement significantly and promote the mechanical properties of the ceramics. However, the excess addition of SiCp or SiCw led to the formation of pores with large sizes and degraded the mechanical properties instead. When 13 wt% SiCp was introduced, the maximum flexural strength of 1180.0 MPa and fracture toughness of 15.9 MPa·m 1/2 were obtained, whereas the maximum flexural strength of 1314.0 MPa and fracture toughness of 14.7 MPa·m 1/2 were achieved at 20 wt% SiCw. Interestingly, the simultaneous addition of SiCp and SiCw could further improve the mechanical properties, and the highest flexural strength of 1334.0 MPa and fracture toughness of 16.0 MPa·m 1/2 were achieved at a SiCw/SiCp ratio of 16/4. The reinforcement mechanisms in the ceramics mainly included the phase transformation toughening of ZrO 2 , the crack deflection and bridging of SiCp and SiCw, and the pull‐out of SiCw.

Liu, Longyang↗
DOE OSTI2023

Electrochemical-mechanical coupling failure mechanism of composite cathode in all-solid-state batteries

Composite cathode composed of active particles and solid electrolytes (SEs) can considerably enlarge the particle-SE contact areas and achieve high areal loadings in all-solid-state batteries (ASSBs). However, the challenging interfacial instability and particle damage problems remain unsolved. Herein, we establish a 3D electrochemical-mechanical coupled model to investigate the underlying failure mechanism by considering the governing electrochemical and physics processes. Micro-scale heterogeneous primary particles with random crystallographic orientation and size inside the LiNi 1/3 Co 1/3 Mn 1/3 O 2 (NCM111) secondary particle of the model result in the anisotropic Li diffusion and volume variation within the secondary particle, leading to significant nonuniformity of the Li concentration, and GPa-level stress distributions at primary particle boundaries, and finally causing the particle internal cracks. The particle volume shrinkage under the constraint of stiff Li 7 La 3 Zr 2 O 12 (LLZO) SE triggers the interface debonding (gap>50 nm) with increased interfacial impedance to degrade cell capacity. Higher C-rates result in larger residual stress (~100 MPa)/strain/debonding gap at dis-charging end, more likely to deteriorate the cell performance. Increasing the interfacial strength between the particle and SE can suppress the interface debonding but induces high stress (up to 10 GPa). In conclusion, results reveal the underlying mechanism of the electrochemical-mechanical coupling failure mechanism for composite cathode and provide promising guidance on the further improvement of a more robust composite cathode for ASSBs.

25 ENERGY STORAGE↗
DOE OSTI2019

Effects of twin boundaries and pre-existing defects on mechanical properties and deformation mechanisms of yttria-stabilized tetragonal zirconia

In annealing of yttria-stabilized tetragonal zirconia (YSTZ), {011}-specific twins and sub-surface defects are often observed, however their effects on the martensitic phase transformation and deformation behavior of YSTZ have never been investigated. In this work, the roles of twin boundaries (TBs) and pre-existing defects in determining the mechanical properties and subsequent deformation mechanisms of YSTZ nanopillars are studied. Using large-scale molecular dynamics simulations, we show that Young’s modulus and strength of YSTZ decrease with the increase of TB density, but the ductility of YSTZ pillars increases. Phase transformation behavior is found to be correlated to TB density. The sensitivity of mechanical responses of twinned structures to pre-existing defects is also studied. A competitive mechanism between TB-induced phase transformation and void-induced phase transformation is observed. When the diameter of a pre-existing void is smaller than a critical value, only TB-induced phase transformation occurs, which leads to void-insensitive mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microband induced plasticity and the temperature dependence of the mechanical properties of a carbon-doped FeNiMnAlCr high entropy alloy

Highlights: • A superior fcc HEA with the strength of 1.5 GPa at the cryogenic condition is developed. • The strengthening mechanisms of HEAs at different temperatures are clarified. • The temperature dependence of MBIP effect is revealed. - Abstract: The uniaxial mechanical properties of the high entropy alloy (HEA) Fe{sub 40.4}Ni{sub 11.3}Mn{sub 34.8}Al{sub 7.5}Cr{sub 6} doped with 1.1 at.% C have been determined for both the as-cast and recrystallized states at temperatures from 77 to 973 K. Very high yield strengths were obtained at 77 K of 928 MPa for the as-cast HEA and 1037 MPa for the recrystallized HEA. The yield strength decreased sharply to 293 K and more slowly to 973 K, where it was ~200 MPa [11] in both conditions. The lattice friction stress, which results from the increase of the Peierls barrier, was the major contributor to the large yield strength at 77 K. On the other hand, the grain boundaries lose their strengthening ability at a high temperature, which largely accounts for the sharp drop in yield strength of the fine-grained (5 μm) recrystallized HEA at 973 K. The elongation to failure was highest at 293 K and 673 K with the lowest values at 77 K. Transmission electron microscopy was used to study the effects of temperature on the deformation mechanisms of the HEAs, especially the temperature dependence of the microband-induced plasticity effect. At temperatures ranging from 77 K to 673 K microbands form in the as-cast HEA, while dislocation clusters were observed in the recrystallized HEA over this temperature range. Only tangled dislocations were found at 973 K for both the as-cast and recrystallized HEA due to thermally-activated deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructure evolution and a new mechanism of B2 phase on room temperature mechanical properties of Ti-47Al-2Cr-2Nb alloy prepared by hot isostatic pressing

Highlights: • The microstructure evolution of Ti-47Al-2Cr-2Nb alolly was investigated in detail. • The foramtion of B{sub 2} phase can be adjusted in Ti-47Al-2Cr-2Nb alloy. • A new mechanism of B{sub 2} phase on room temperature mechanical properties of Ti-47Al-2Cr-2Nb alloy was proposed. - Abstract: The formation of B{sub 2} phase was adjusted via various hot isostatic pressing processes in Ti-47Al-2Cr-2Nb alloy. The microstructure evolution and a new mechanism of B{sub 2} phase on room temperature mechanical properties was investigated by BSE, EBSD and TEM in detail. The result shows that the formation of B{sub 2} phase leads to Cr element content decrease in γ matrix phase, which results in lattice parameter increase, namely the c/a ratio of γ matrix phase. Finally, at room temperature the mechanical properties of Ti-47Al-2Cr-2Nb alloy deteriorates.

36 MATERIALS SCIENCE↗
DOE OSTI2017

An Estimation of Hybrid Quantum Mechanical Molecular Mechanical Polarization Energies for Small Molecules Using Polarizable Force-Field Approaches

Here in this work, we report two polarizable molecular mechanics (polMM) force field models for estimating the polarization energy in hybrid quantum mechanical molecular mechanical (QM/MM) calculations. These two models, named the potential of atomic charges (PAC) and potential of atomic dipoles (PAD), are formulated from the ab initio quantum mechanical (QM) response kernels for the prediction of the QM density response to an external molecular mechanical (MM) environment (as described by external point charges). The PAC model is similar to fluctuating charge (FQ) models because the energy depends on external electrostatic potential values at QM atomic sites; the PAD energy depends on external electrostatic field values at QM atomic sites, resembling induced dipole (ID) models. To demonstrate their uses, we apply the PAC and PAD models to 12 small molecules, which are solvated by TIP3P water. The PAC model reproduces the QM/MM polarization energy with a R 2 value of 0.71 for aniline (in 10,000 TIP3P water configurations) and 0.87 or higher for other eleven solute molecules, while the PAD model has a much better performance with R 2 values of 0.98 or higher. The PAC model reproduces reference QM/MM hydration free energies for 12 solute molecules with a RMSD of 0.59 kcal/mol. The PAD model is even more accurate, with a much smaller RMSD of 0.12 kcal/mol, with respect to the reference. Lastly, this suggests that polarization effects, including both local charge distortion and intramolecular charge transfer, can be well captured by induced dipole type models with proper parametrization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Experimental evidence for chemo-mechanical coupling during carbon mineralization in ultramafic rocks

It is known that storing carbon dioxide in the subsurface as carbonate minerals has the benefit of long-term stability and immobility. Ultramafic rock formations have been suggested as a potential reservoir for this type of storage due to the availability of cations to react with dissolved carbon dioxide and the fast reaction rates associated with minerals common in ultramafic formations; however, the rapid reactions have the potential to couple with the mechanical and hydraulic behavior of the rocks and little is known about the extent and mechanisms of this coupling. In this study, we argue that the dissolution of primary minerals and the precipitation of secondary minerals along pre-existing fractures in samples lead to reductions in both the apparent Young's modulus and shear strength of aggregates, accompanied by reduction in permeability. Hydrostatic and triaxial deformation experiments were run on dunite samples saturated with de-ionized water and carbon dioxide-rich solutions while stress, strain, permeability and pore fluid chemistry were monitored. Sample microstructures were examined after reaction and deformation using scanning electron microscopy (SEM). The results show that channelized dissolution and carbonate mineral precipitation in the samples saturated with carbon dioxide-rich solutions modify the structure of grain boundaries, leading to the observed reductions in stiffness, strength and permeability. A geochemical model was run to help interpret fluid chemical data, and we find that the apparent reaction rates in our experiments are faster than rates calculated from powder reactors, suggesting mechanically enhanced reaction rates. In conclusion, we find that chemo-mechanical coupling during carbon mineralization in dunites leads to substantial modification of mechanical and hydraulic behavior that needs to be accounted for in future modeling efforts of in situ carbon mineralization projects.

58 GEOSCIENCES↗
DOE OSTI2017

Mechanical property degradation and microstructural evolution of cast austenitic stainless steels under short-term thermal aging

Mechanical testing and microstructural characterization were performed on short-term thermally aged cast austenitic stainless steels (CASS) to understand the severity and mechanisms of thermal-aging degradation experienced during extended operation of light water reactor (LWR) coolant systems. Four CASS materials – CF3, CF3M, CF8, and CF8M – were thermally aged for 1500 hours at 290 °C, 330 °C, 360 °C, and 400 °C. All four alloys experienced insignificant change in strength and ductility properties but a significant reduction in absorbed impact energy. The primary microstructural and compositional changes during thermal aging were spinodal decomposition of the δ-ferrite into α/ α`, precipitation of G-phase in the δ-ferrite, segregation of solute to the austenite/ ferrite interphase boundary, and growth of M23C6 carbides on the austenite/ferrite interphase boundary. These changes were shown to be highly dependent on chemical composition, particularly the concentration of C and Mo, and aging temperature. A comprehensive model is being developed to correlate the microstructural evolution with mechanical behavior and simulation for predictive evaluations of LWR coolant system components.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Developing an experimental-computational framework to investigate the deformation mechanisms and mechanical properties of Al-8Ce-10Mg alloys at micro and macroscales

There is a promising future for the use of aluminum-cerium-magnesium alloys in a broad range of applications, including devices that operate at high temperatures. With cerium currently considered a waste product of rare earth mining validation studies of possible applications are essential to reduce the environmental waste. Here, a computational-experimental framework is developed to investigate the role both the intermetallic and matrix have on the mechanical properties of these alloys. A set of experiments, including SEM/EBSD imaging, nanoindentation, in-situ SEM tensile testing, and in-situ SEM-DIC tests are performed to characterize the microstructure and mechanical properties of these alloys. Furthermore, the elastic, plastic, and failure deformation mechanisms of the microstructure, and their correlation with the bulk scale mechanical properties are investigated. Experimental results are also used to calibrate parameters for a crystal plasticity finite element model, by performing a computational framework that minimizes the error between the computational and experimental results. This model is then utilized to investigate how the area percentage of intermetallics and the crystallographic texture control the mechanical properties of the alloy. Simulation results show that an increase in the percentage of intermetallics increase the strength but decrease the ductility of the alloy. Also, a change in material texture improves strength and reduces damage that leads to material failure. The development of the crystal plasticity model, as discussed in this work, opens opportunities for future investigations of similar aluminum-cerium-magnesium alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Selective Targeting by a Mechanism-Based Inactivator against Pyridoxal 5'-Phosphate-Dependent Enzymes: Mechanisms of Inactivation and Alternative Turnover

Potent mechanism-based inactivators can be rationally designed against pyridoxal 5'-phosphate (PLP)-dependent drug targets, such as ornithine aminotransferase (OAT) or γ-aminobutyric acid aminotransferase (GABA-AT). An important challenge, however, is the lack of selectivity toward other PLP-dependent, off-target enzymes, because of similarities in mechanisms of all PLP-dependent aminotransferase reactions. On the basis of complex crystal structures, we investigate the inactivation mechanism of OAT, a hepatocellular carcinoma target, by (1R,3S,4S)-3-amino-4-fluorocyclopentane-1-carboxylic acid (FCP), a known inactivator of GABA-AT. A crystal structure of OAT and FCP showed the formation of a ternary adduct. This adduct can be rationalized as occurring via an enamine mechanism of inactivation, similar to that reported for GABA-AT. Interestingly, however, the crystal structure of an off-target, PLP-dependent enzyme, aspartate aminotransferase (Asp-AT), in complex with FCP, along with the results of attempted inhibition assays, suggests that FCP is not an inactivator of Asp-AT, but rather an alternate substrate. Turnover of FCP by Asp-AT is also supported by high-resolution mass spectrometry. Amid existing difficulties in achieving selectivity of inactivation among a large number of PLP-dependent enzymes, the obtained results provide evidence that a desirable selectivity could be achieved, taking advantage of subtle structural and mechanistic differences between a drug-target enzyme and an off-target enzyme, despite their largely similar substrate binding sites and catalytic mechanisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Nanoscale self-healing mechanisms in shape memory ceramics

Abstract Shape memory ceramics, such as yttria-stabilized tetragonal zirconia (YSTZ), offer unique properties including ultra-high operating temperatures and high resistance to oxidation. However, they are susceptible to formation of defects during manufacturing and/or by mechanical deformation. To completely take advantage of their shape memory properties, it is necessary to fully understand the nano-structural evolution of defects under external stimuli. In this study, defect evolution behaviors in YSTZ nanopillars are investigated by atomistic simulations. Two characteristic orientations of $$\left[ {01\bar 1} \right]$$ 01 1 ¯ and [001] are selected to represent the dominant deformation mechanisms of phase transformation and dislocation migration, respectively. Volume expansion associated with the tetragonal to monoclinic phase transformation is observed to promote healing of crack and void. Atom stress analyses reveal stress concentrations along the newly formed monoclinic phase bands. A critical crack width is identified, less than which the crack can be fully closed in compression. For [001]-oriented YSTZ nanopillars, dislocation migration leads to formations of an amorphous phase, which also assist the crack and void closure process. The revealed crack/void healing mechanisms may provide a path for mitigating internal defects that influences the mechanical properties and deformation mechanisms of shape memory ceramics.

Zhang, Ning (ORCID:0000000240661837)↗
DOE OSTI2019

In situ Characterization of Kinetics and Mass Transport of PbSe Nanowire Growth via LS and VLS Mechanisms

As a versatile approach, the vapor-liquid-solid (VLS) mechanism is widely used to grow nanowires. However, the details of the mass transit and mechanism of compound nanowire growth have been limited because of the complex growth process. In this study, we grew binary PbSe nanowires using an in situ gas-heating cell and elucidated two different growth mechanisms and mass transit pathways of different growth species, as well as their controlling factors, using in situ high-resolution transmission electron microscopy and composition analysis. Initial high supersaturation led to poly-nucleation and fast PbSe crystal growth through bulk diffusion of Pb and Se growth species from liquid to solid—a liquid-solid (LS) mechanism. In situ composition analysis showed that Pb dissolved in liquid catalyst at miscible atomic percentages as a precursor during growth. Se precursor was depleted after initial growth and was supplied from the vapor phase, leading to subsequently relatively slow VLS controlled mono-nuclear growth. We revealed the correlation between the nucleation mechanisms and the growth kinetics using a generalized Avrami model. Our study highlighted the key correlations among supersaturation, nucleation, mass transit, and growth kinetics, thereby enabling morphological and compositional control of nanowires.

Song, Miao↗
NASA NTRS1991

A simple electrical-mechanical model of the heart applied to the study of electrical-mechanical alternans

Recent evidence has shown that a subtle alternation in the surface ECG (electrical alternans) may be correlated with the susceptibility to ventricular fibrillation. In the present work, the author presents evidence that a mechanical alternation in the heartbeat (mechanical alternans) generally accompanies electrical alternans. A simple finite-element computer model which emulates both the electrical and the mechanical activity of the heart is presented. A pilot animal study is also reported. The computer model and the animal study both found that (1) there exists a regime of combined electrical-mechanical alternans during the transition from a normal rhythm towards a fibrillatory rhythm, (2) the detected degree of alternation is correlated with the relative instability of the rhythm, and (3) the electrical and mechanical alternans may result from a dispersion in local electrical properties leading to a spatial-temporal alternation in the electrical conduction process.

Clancy, Edward A.↗
DOE OSTI2017

Ion transport properties of mechanically stable symmetric ABCBA pentablock copolymers with quaternary ammonium functionalized midblock

Anion exchange membranes (AEMs) are a promising class of materials for applications that require selective ion transport, such as fuel cells, water purification, and electrolysis devices. Studies of structure–morphology–property relationships of ion-exchange membranes revealed that block copolymers exhibit improved ion conductivity and mechanical properties due to their microphase-separated morphologies with well-defined ionic domains. While most studies focused on symmetric diblock or triblock copolymers, here, the first example of a midblock quaternized pentablock AEM is presented. A symmetric ABCBA pentablock copolymer was functionalized to obtain a midblock brominated polymer. Solution cast films were then quaternized to obtain AEMs with resulting ion exchange capacities (IEC) ranging from 0.4 to 0.9 mmol/g. Despite the relatively low IEC, the polymers were highly conductive (up to 60 mS/cm Br- at 90 °C and 95%RH) with low water absorption (<25 wt %) and maintained adequate mechanical properties in both dry and hydrated conditions. X-ray scattering and transmission electron microscopy (TEM) revealed formation of cylindrical non-ionic domains in a connected ionic phase.

Ertem, SP↗
DOE OSTI2017

Mechanical Reliability and Life Prediction of Coated Metallic Interconnects within Solid Oxide Fuel Cells

Metallic cell interconnects (IC) made of ferritic stainless steels, i.e., iron-based alloys, have been increasingly favored in the recent development of planar solid oxide fuel cells (SOFCs) because of their advantages in excellent imperviousness, low electrical resistance, ease in fabrication, and cost effectiveness [1]. Typical SOFC operating conditions inevitably lead to the formation of oxide scales on the surface of ferritic stainless steel, which could cause delamination, buckling, and spallation resulting from the mismatch of the coefficient of thermal expansion and eventually reduce the lifetime of the interconnect components. Various protective coating techniques have been applied to alleviate these drawbacks [2]. In the present work, a fracture-mechanics-based quantitative modeling framework has been established to predict the mechanical reliability and lifetime of the spinel-coated, surface-modified specimens under an isothermal cooling cycle. Analytical solutions have been formulated to evaluate the scale/substrate interfacial strength and determine the critical oxide thickness in terms of a variety of design factors, such as coating thickness, material properties, and uncertainties. The findings then are correlated with the experimentally measured oxide scale growth kinetics to quantify the predicted lifetime of the metallic interconnects.

Solid oxide fuel cell (SOFC), Ferritic stainless s↗