Search NASA⌕ Search

SEARCH · Search NASA

Results for “METALS - TEMPERATURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Assessing metal nitrides and metal carbides as supports for thermally stable single-atom catalysts

Single-atom catalysts supported on metal oxides have been demonstrated to exhibit exceptional activity while also maintaining single-atom stability. However, alternative supports such as metal nitrides and carbides have received far less attention. Herein, we use density functional theory to systematically investigate the relative thermal stability of single-atom catalysts over a host of transition metal nitride and carbide supports. By considering the binding and dimerization energies of isolated transition metal atoms across various surface facets, we identify transition metal/support pairs that show the most promise for high-density single-atom catalysts. We find that transition metal atoms can be stabilized on both defect sites and pristine surfaces over transition metal nitrides and carbides. Furthermore, we identify promising metal/support pairings that may be suitable for achieving both stable and high-density single-atom catalysts. Furthermore, these results provide valuable insights to guide synthesis efforts towards achieving stable single-atom transition metal catalysts.

Density functional theory↗
DOE OSTI2022

Influence of metallic contaminants on the electrochemical and thermal behavior of Li-ion electrodes

Emerging nondestructive (direct) recycling techniques for lithium-ion batteries may introduce metallic impurities into recycled electrodes. In the present work, the impact of such nonionic contaminants on the practical performance of both anode and cathode materials is evaluated using a synergistic combination of electrochemical and thermal analysis. The impurities under study have been selected through evaluation of industrially shredded batteries, and include Fe0, Al0, Mg0, Cu0, and Si0. The electrochemical behavior of materials containing each individual contaminant at either the anode or the cathode is evaluated in both half-cell and full-cell format. Further, the first-cycle thermal signatures of full cells are used to validate and complement electrochemical signatures, and the two techniques are used in conjunction to suggest distinct mechanisms of electrochemical reactivity for the various impurities. At the anode, metallic contaminants are found to disrupt performance through direct reaction with Li and may serve as weak catalysts to accelerate electrolyte degradation. At the cathode, metallic contaminants show evidence of crossover during formation cycling to disrupt SEI formation. We suggest that coupled electrochemical and thermal analysis may be used to both identify the presence of contaminants and to elucidate specific mechanisms of reactivity for metallic impurities under anodic and cathodic conditions.

Contaminant↗
DOE OSTI2024

Hopping frustration-induced flat band and strange metallicity in a kagome metal

The introduction of localized electronic states into a metal can alter its physical properties, for example enabling exotic metal physics including heavy fermion and strange metal behaviour. A common source of localized states in such systems are partially filled 4f and 5f shells because of the inherently compact nature of those orbitals. The interaction of electrons in these orbitals with the conduction sea is well described by the Kondo framework. However, there have also been observations of Kondo-like behaviour in 3d transition metal oxides and in 4d- and 5d-containing van der Waals heterostructures. This calls for a broader consideration of the physical requirements for Kondo systems. Here we show transport and thermodynamic hallmarks of heavy fermion and strange metal behaviour that arise in the kagome metal Ni3In, wherein the source of localized states is destructive interference-induced band flattening of partially filled Ni 3d states. With magnetic field and pressure tuning, here we also find evidence that the system is proximate to quantum criticality, extending the analogy to f-electron Kondo lattices. These observations highlight the role of hopping frustration in metallic systems as a potential source for strong correlations. Additionally, this suggests a lattice-driven approach to realizing correlated metals with non-trivial band topology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metal film for additive metal manufacturing

A metal film for use by an additive manufacturing apparatus is described herein. The metal film has a support structure and metal voxels removably attached to the support structure by respective junctions. When a metal voxel in the metal film is impacted by an energy pulse from an energy source of the additive manufacturing apparatus, one or more junctions that attach the metal voxel to the support structure are broken, resulting in the metal voxel detaching from the metal film (at a desired location in a two-dimensional plane).

Robinson, David↗
DOE OSTI2020

Excitations of Intercalated Metal Monolayers in Transition Metal Dichalcogenides

We combine Raman scattering spectroscopy and lattice dynamics calculations to reveal the fundamental excitations of the intercalated metal monolayers in the Fe x TaS 2 (x = 1/4, 1/3) family of materials. Both in- and out-of-plane modes are identified, each of which has trends that depend upon the metal–metal distance, the size of the van der Waals gap, and the metal-to-chalcogenide slab mass ratio. We test these trends against the response of similar systems, including Cr-intercalated NbS 2 and RbFe(SO 4 ) 2 , and demonstrate that the metal monolayer excitations are both coherent and tunable. Here, we discuss the consequences of intercalated metal monolayer excitations for material properties and developing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Atomically Dispersed Metals on Well-Defined Supports including Zeolites and Metal–Organic Frameworks: Structure, Bonding, Reactivity, and Catalysis

When metals in supported catalysts are atomically dispersed, they are usually cationic and bonded chemically to supports. Investigations of noble metals in this class are growing rapidly, leading to discoveries of catalysts with new properties. Characterization of these materials is challenging because the metal atoms reside on surfaces that are typically nonuniform in composition and structure. We posit that understanding of structures and catalytic properties of these materials is emerging most strongly from investigations of structurally uniform catalysts (metal atoms dispersed on crystalline supports) which can be characterized incisively with atomic-resolution electron microscopy, X-ray absorption spectroscopy, and infrared spectroscopy, bolstered by density functional theory. We assess the literature of such catalysts supported on zeotype materials, metal–organic frameworks, and covalent organic frameworks. Finally, assessing characterization, reactivity, and catalytic performance of catalysts for oxidation, hydrogenation, the water–gas shift reaction, and others, we consider metal–support interactions and ligand effects for various metal–support combinations, evaluating the degree of structural uniformity of exemplary catalysts and summarizing structure–reactivity and structure–catalytic property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Trends in Siting of Metals in Heterometallic Nd–Yb Metal–Organic Frameworks and Molecular Crystals

Several studies suggest that metal ordering within metal–organic frameworks (MOFs) is important for understanding how MOFs behave in relevant applications; however, these siting trends can be difficult to determine experimentally. To garner insight into the energetic driving forces that may lead to nonrandom ordering within heterometallic MOFs, we employ density functional theory (DFT) calculations on several bimetallic metal–organic crystals composed of Nd and Yb metal atoms. We also investigate the metal siting trends for a newly synthesized MOF. Our DFT-based energy of mixing results suggest that Nd will likely occupy sites with greater access to electronegative atoms and that local homometallic domains within a mixed-metal Nd–Yb system are favored. We also explore the use of less computationally extensive methods such as classical force fields and cluster expansion models to understand their feasibility for large system sizes. Here, this study highlights the impact of metal ordering on the energetic stability of heterometallic MOFs and crystal structures.

energy of mixing↗
DOE OSTI2020

Metal–Organic Framework Nodes as a Supporting Platform for Tailoring the Activity of Metal Catalysts

Catalysis is a ubiquitous element of the modern economy, representing a cornerstone of many sectors including energy, materials, and pharmaceuticals. Within this realm, 80% of reactions are carried out by heterogeneous catalysts due to their advantageous physical and chemical characteristics. In some heterogeneous systems, the reaction rate can be optimized through rational catalyst design, in which support materials can be tailored structurally and stereoelectronically for targeted purposes to better facilitate the catalytic reaction. To this end, metal-organic frameworks (MOFs) have garnered recent attention due to their high porosity, crystallinity, and chemical tunability, which can be used to derive structure-activity relationships in the design of catalysts. In this Perspective, we survey examples of catalytically active guest metals on the inorganic nodes of MOFs. This is done with the intention of providing design guidelines for tailoring chemical reactivity and insights into the opportunities for future growth in this field. Strategies for rational design in MOF catalysis include electronic tuning of the metal node in the MOF support, installing promoter ions onto the node to effect the reactivity of grafted metals, modulation of the spatial environment around the transition metal using the metal node structure, and achieving site uniformity in supported catalysts. By highlighting these efforts, we seek to underscore the role of MOF nodes as nonspectator supports for catalytic metal complexes and provide future directions for rational catalyst design by tuning reactivity on these anchoring platforms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Crossover Effects in Batteries with High–Nickel Cathodes and Lithium–Metal Anodes

It is well understood that cathode-to-anode crossover, especially of transition-metal ions, can significantly impact the long-term cycling of lithium-ion batteries. The dissolved transition-metal ions in lithium-ion cells deposit on the graphite anode, disrupt the solid-electrolyte interphase (SEI), and catalyze further side reactions. Meanwhile, crossover effects in lithium-metal batteries have rarely been studied. This study is the first to investigate crossover effects in lithium-metal batteries with high-nickel layered-oxide cathodes. It is shown that the crossover of transition-metal ions from LiNi 0.9 Mn 0.05 Co 0.05 O 2 has minimal effect on the lithium-metal anode (LMA) due to the following reasons. The catalytic transition metals 1) have less effect on an inherently reactive LMA, 2) are diluted in a thicker SEI, and 3) are produced in overall lower quantity due to the limited cycle life of the LMA. Conversely, the LMA generates soluble decomposition products that cross over to the cathode even during early cycling. This crossover accelerates impedance growth and capacity fade at the cathode and is partially responsible for the mismatch between the performance of half and full-cells with layered-oxide cathodes. Finally, this study highlights the need for better battery design with LMA, potentially including electrolyte or cell modifications.

25 ENERGY STORAGE↗
DOE OSTI2020

Hybrid fiber metal composite laminate interlaminar reinforcement through metal interlocks

Aircraft and automobile industries are continually seeking high-performance and lightweight solutions. Fiber-reinforced composites in conjunction with metals are being considered in the form of hybrid materials. There is a continuous need for improvement of interfacial bonding between composite layers and metal constituents. In this study, an innovative hybrid fiber interlocking metal hooks laminate (FIMHL) system was developed in which fiber-reinforced thermoset composite, and metal sheets are mechanically bonded together using out of plane hooks stamped in the metal. Process optimization was performed to gain the full benefit of the through-thickness reinforcement. Microstructural analysis showed improved interaction between the metal hooks and the fiber layers which reduced porosity and resin richness. This was reflected in mechanical properties, as tensile and flexural strength of FIMHL was enhanced by 38.5 and 18.8%, respectively, after process optimization. Furthermore, normalized weight fraction (76.4%) properties of FIMHL also confirmed that the increase in mechanical properties of optimized panel were not only due to increased reinforcement (glass fiber + aluminum) volume fraction but also because of improved metal hooks and fibers interaction. There was no significant effect on lap shear and fracture toughness, as they depend on bend back behavior of the hooks. A bilinear traction-separation model was used to characterize mode-I interlaminar fracture toughness properties, and 4.5% variation was recorded when modeling and experimental values were compared.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predicting Adhesion Energies of Metal Nanoparticles to Support Surfaces, Which Determines Metal Chemical Potential versus Particle Size and Thus Catalyst Performance

Improved catalysts and electrocatalysts composed of transition metal nanoparticles dispersed on high-area supports are essential for energy and environmental technologies. The chemical potential of the metal atoms in these supported nanoparticles is an important descriptor that correlates with both their catalytic activity and deactivation rate. This descriptor (μ M ) is predictably determined by the particle size and the adhesion energy per unit area at the metal/support interface (E adh ). We show here that the adhesion energies for different metals on a given support scale linearly with a simple property of the metal: for oxides, it is proportional to the metal oxophilicity, and for the carbon support, it increases linearly with metal carbophilicity (both divided by the area per metal atom). Furthermore, these relationships allow predicting E adh for other metal/support combinations, thus allowing estimation of μ M versus particle size and thereby better structure-based predictions of catalysts’ performance, which can aid in designing improved catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal–Ligand Covalency in the Valence Excited States of Metal Dithiolenes Revealed by S 1s3p Resonant Inelastic X-ray Scattering

Metallo dithiolene complexes with biological and catalytic relevance are well-known for having strong metal–ligand covalency, which dictates their valence electronic structures. We present the resonant sulfur Kβ (1s3p) X-ray emission spectroscopy (XES) for a series of Ni and Cu bis(dithiolene) complexes to reveal the ligand sulfur contributions to both the occupied and unoccupied valence orbitals. While S K-edge X-ray absorption spectroscopy played a critical role in identifying the covalency of the unoccupied orbitals of metal dithiolenes, the present focus on XES explores the occupied density of states. For a series of [Cu(mnt) 2 ] n– and [Ni(mnt) 2 ] n– anions and dianions, a comparison of the nonresonant and resonant S Kβ XES spectra highlights the dramatic improvement in spectral resolution and corresponding ability to differentiate subtle changes in occupied electronic structure across the series. Furthermore, the use of resonant inelastic X-ray scattering (RIXS) probes the valence excited states and the core–valence couplings of the complexes. By employing a theoretical approach based on time-dependent density functional theory to interpret the RIXS spectra, we reveal how metal–ligand covalency influences the excited state energies and covalencies. We identify the low energy excited states as having the same symmetry as the nominal “ligand field” or “d–d” states that typically dominate the photophysics of 3d metal complexes but with significant metal– ligand charge transfer character dictated by their covalency. These results suggest that strong metal–ligand covalency can be used to influence the charge-transfer photochemistry of first row transition metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Introducing metal–sulfur active sites in metal–organic frameworks via post-synthetic modification for hydrogenation catalysis

Metal–sulfur active sites play a central role in catalytic processes such as hydrogenation and dehydrogenation, yet the majority of active sites in these compounds reside on the surfaces and edges of catalyst particles, limiting overall efficiency. Here we present a strategy to embed metal–sulfur active sites into metal–organic frameworks (MOFs) by converting bridging or terminal chloride ligands into hydroxide and subsequently into sulfide groups through post-synthetic modification. We apply this method to two representative MOF families: one featuring one-dimensional metal–chloride chains and another containing discrete multinuclear metal clusters. Crystallographic and spectroscopic analyses confirm structural integrity and sulfide incorporation, and the transformation is monitored by in situ total scattering methods. The sulfided MOFs display enhanced catalytic activity in the selective hydrogenation of nitroarenes using molecular hydrogen. Density functional theory calculations indicate that sulfur incorporation promotes homolytic metal–ligand bond cleavage and facilitates H 2 activation. This work establishes an approach to construct MOFs featuring accessible metal–sulfide sites.

Catalyst synthesis↗
DOE OSTI2021

Selective sulfidation of metal compounds

There is urgent, unprecedented demand for critical by-product and co-product metallic elements for the infrastructure (magnets, batteries, catalysts and electronics) needed to power society with renewable electricity1,2,3. However, the extraction of d-block and f-block metals from mineral and recycled streams is thermodynamically difficult, typically requiring complete dissolution of the materials, followed by liquid–liquid separation using metal-ion complexing or chelating behaviour4,5. The similar electronic structure of these metals results in poor separation factors, necessitating immense energy, water and chemicals consumption6,7,8. Here a metal-processing approach based on selective anion exchange is proposed. Several simple process levers (gas partial pressure, gas flowrate and carbon addition) are demonstrated to selectively sulfidize a target metal from a mixed metal-oxide feed. The physical and chemical differences between the sulfide and oxide compounds (for example, density, magnetic susceptibility and surface chemistry) can then be exploited for vastly improved separation compared with liquid–liquid methods9. The process conditions of sulfidation are provided for 56 elements and demonstrated for 15 of them. An assessment of the environmental and economic impacts suggests a path towards 60–90% reductions in greenhouse gas emissions while offering substantial capital cost savings compared with liquid–liquid hydrometallurgy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparative analysis of plasmon modes in layered Lindhard metals and strange metals

The enigmatic strange metal remains one of the central unsolved problems of 21st century science. Understanding this phase of matter requires knowledge of the momentum- and energy-resolved dynamic charge susceptibility 𝜒⁡(𝑞,𝜔), especially at finite momentum. Inelastic electron scattering (EELS), performed in either transmission or reflection geometry, is a powerful probe of 𝜒⁡(𝑞,𝜔). For the prototypical strange metal Bi 2 ⁢Sr 2 ⁢CaCu 2 ⁢O 8+𝑥 , transmission- and reflection EELS, and infrared (IR) spectroscopy agree at 𝑞∼0, all revealing a highly damped plasmon near 1 eV. At larger 𝑞, however, EELS results show unresolved discrepancies. Since IR data are highly reproducible, it is advantageous to use IR data to calculate what the expected EELS response should be at modest 𝑞. Building on prior momentum-resolved reflection geometry M-EELS work [Chen et al., Phys. Rev. B 109, 045108 (2024)], we extend this approach to transmission EELS for finite stacks of metallic layers, comparing a “textbook” Lindhard metal to a strange metal. In the Lindhard case, the low-𝑞 response is dominated by long-lived, standing wave plasmon modes arising from interlayer Coulomb coupling, with in-plane dispersions that resemble the well-known Fetter modes of layered metals. This behavior depends only on the geometry and the long-range nature of the Coulomb interaction and is largely insensitive to layer details. At larger 𝑞, the response reflects the microscopic properties of individual layers. For the strange metal, calculations based on IR data predict a highly damped plasmon with weak dispersion and no distinct surface mode. While our results match IR and M-EELS at low 𝑞, they do not reproduce any published EELS spectra at large 𝑞, highlighting unresolved discrepancies that demand further experimental investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Metal-Complex Inks for Lower Cost and Improved Passivation for Silicon Photovoltaic Metallization

This contribution introduces the silicon PV community to screen-printable metal-complex inks that potentially will reduce Ag usage in Si PV metallization to one-quarter and costs to one-third that of traditional particle-based pastes while also improving passivation. Metal-complex inks are formulated using a Tollen's reaction to produce inks with a high percentage of diamminesilver (I) cations (22 wt %) in a solution of acetate and formate anions. When printed and dried labile ammonia ligands evaporate, leaving behind silver cations which, when reduced by formate anions and acetic acid, plate out silver and silver acetate. When annealed to just 300 degrees C a dense metallic silver film forms with excellent conductivity, and adhesion to silicon. When compared to traditional particle-based screen-printing pastes, the metal-complex inks are much denser, have higher conductivity, use less Ag, and are a fraction of the cost. Importantly, the inks anneal from 90 - 450 degrees C allowing for better passivation schemes than fired SiNx. This contribution highlights first experiments on the improved passivation of metallized poly-Si/SiO2 passivated contacts using metal-complex, Ag inks compared with particle-based, fired pastes.

metal-complex ink↗