SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
It has been demonstrated that classical probabilities, and in particular, probabilistic Turing machine, can be simulated by combining chaos and non-Lipschitz dynamics, without utilization of any man-made devices. Self-organizing properties of systems coupling simulated and calculated probabilities and their link to quantum computations are discussed.
We use a spectral-based approach that employs principal component analysis along with a relatively shallow artificial neural network (NN) to substantially reduce noise and other artifacts in terrestrial chlorophyll solar-induced fluorescence (SIF) retrievals. SIF is a very small emission at red and far-red wavelengths that is difficult to measure and is highly sensitive to random errors and systematic artifacts. Our approach relies upon an assumption that a trained NN can effectively reconstruct the total SIF signal from a relatively small number of leading principal components of the satellite-observed far-red radiance spectra without using information from the trailing modes that contain most of the random errors. We test the approach with simulated reflectance spectra produced with a full atmospheric and surface radiative transfer model using different observing and geophysical parameters and various noise levels. Resulting noisy and noise-reduced retrieved SIF values are compared with true values to assess performance. We then apply our noise reduction approach to SIF derived from two different satellite spectrometers. For evaluation, since the truth in this case is unknown, we compare SIF retrievals from two independent sensors with each other. We also compare the noise-reduced SIF temporal variations with those from an independent gross primary product (GPP) product that should display similar variations. Results show that our noise reduction approach improves capture of SIF seasonal and inter-annual variability. Our approach should be applicable to many noisy data products derived from spectral measurements. Our methodology does not replace the original retrieval algorithms; rather the original noisy retrievals are needed as the target for the NN training process.
Explore the source record for details and available documents.
Blast or penetrator-impact induced shocks are characterized by high acceleration levels, particularily in the higher frequency range and for a short time duration. These shocks are dangerous for the equipment of ships, combat vehicles, airplanes or spacecraft structures. As ballistic shock loads are insufficiently simulated by laboratory test machines, researchers designed a ballistic shock simulator. The impact induced shocks are simulated by an explosive and the vehicle to be bombarded is replaced by a simplified structure. This structure is suitable to accommodate any equipment which can be tested up to their load limits.
Recent advances in the development of machine learning (ML) algorithms have enabled the creation of predictive models that can improve decision making, decrease computational cost, and improve efficiency in a variety of fields. As an organization begins to develop and implement such models, the data used in the training, validation, and testing of machine learning models, the model parameters, and the use cases or limitations of the models must be properly stored to ensure models are both fully traceable and used correctly. In the context of predicting material behavior, advances in computationally intense, physics-based, modeling of material behavior at various length scales, and the emergence of Integrated Computational Materials Engineering (ICME) have driven the need for developing data-driven surrogate models of the physics-based simulation tools using machine learning (ML) techniques. Surrogate model development allows for accurate material behavior prediction at a fraction of the cost of its physics-based counterpart, allowing for multiscale simulations of real-world applications, further enabling the ability to design fit-for-purpose materials for a reasonable computational investment. However, training such models requires extensive data, and thus effective data management is necessary to reach the full potential that ML can offer to material design and ICME. This paper proposes a generalized, robust schema that allows organizations to store both real (experimental) and virtual (simulation) data used to train machine learning models and the defining model parameters and architectures. The developed schema allows for various types of data inputs and outputs, including single point values, time-series data, and images that can be used in for various types of machine learning models while following outlined best practices for effective data management. An effective schema for machine learning data and models can help prevent the recreation of virtual/real training data and surrogate models, can help reduce the time to create new models similar to existing ones by offering a starting point in the hyperparameter determination stages, minimize resources devoted to verification and validation (V&V) and certification of models, and ensure that data and surrogate models are not misused due to full traceability of both the data and ML model. It also allows organizations access to models that have already been developed, such that they can be used in the design of new materials, enabling the overall goals of ICME.
Teams of scientists studied data flow concepts, static data flow machine architecture, and the VAL language. Each team mapped its application onto the machine and coded it in VAL. The principal findings of the study were: (1) Five of the seven applications used the full power of the target machine. The galactic simulation and multigrid fluid flow teams found that a significantly smaller version of the machine (16 processing elements) would suffice. (2) A number of machine design parameters including processing element (PE) function unit numbers, array memory size and bandwidth, and routing network capability were found to be crucial for optimal machine performance. (3) The study participants readily acquired VAL programming skills. (4) Participants learned that application-based performance evaluation is a sound method of evaluating new computer architectures, even those that are not fully specified. During the course of the study, participants developed models for using computers to solve numerical problems and for evaluating new architectures. These models form the bases for future evaluation studies.
Background Long term exposure to microgravity has adverse effects on human body such as bone loss. Due to the vital role of mesenchymal stem cell (MSC) in bone regeneration, studying MSC under microgravity conditions has been of interest during the past decade. However, high cost and limited access to space flight can dampen enthusiasm of researchers. Microgravity simulators provide a way to investigate the effects of microgravity in human physiology. Methods In this study, we compared MSC cultures under simulated microgravity using random positioning machine (RPM) and Gravite 3D simulators. Two culture durations, 1 week and 2 weeks, were selected for MSC cultures without media change. To evaluate impact of simulated microgravity on cell proliferation, cell counting was performed using trypan blue exclusion assay. Additionally, RNA samples and conditioned media were collected for further analysis. Results After 1 week and 2 weeks, no cell morphology change was observed from RPM and Gravite cultures compared to control. Notably, distinct lower cell confluence at the edge of the flasks on the RPM was observed, which could be caused by fluid sheer forces. MSCs cultured on both microgravity simulators showed decreased cell proliferation after 1-week culture. After 2-week culture, cells grown on the RPM showed no significant difference in cell proliferation compared with control while cells cultured on the Gravite bioreactor showed significantly enhanced MSC proliferation. Conclusion Type of microgravity simulator and duration of culture significantly affect MSC proliferation. Further investigation into how simulated microgravity influences MSC gene expression and cytokine secretion related to bone loss is currently on going in our lab.
Transformation of data into knowledge through conceptual induction has been the focus of our research described in this paper. We have developed a Machine Learning System (MLS) to analyze the rocket engine simulation data. MLS can provide to its users fault analysis, characteristics, and conceptual descriptions of faults, and the relationships of attributes and sensors. All the results are critically important in identifying faults.
Arc-jet testing is a fundamental tool in the screening of thermal protection systems under atmospheric entry conditions. In this work, high-fidelity computational fluid dynamics simulations coupled with machine learning methods for the Hypersonic Materials Environmental Test System arc-jet facility have been carried out. This effort improves the MEDLI-2 data reconstruction fidelity by understanding the impact of the NuSil coating over the PICA thermocouple plugs. Thermochemical non-equilibrium models are employed to simulate the flows inside the arc-jet nozzle and chamber and machine learning techniques are used to calibrate the arc-jet inflow conditions. The material response is simulated with the recession and in-depth numerical results compared to experimental measurements.
A discrete time model for simulation of the dynamics of samarium cobalt-type permanent magnet brushless dc machines is presented. The simulation model includes modeling of the interaction between these machines and their attached power conditioners. These are transistorized conditioner units. This model is part of an overall discrete-time analysis of the dynamic performance of electromechanical actuators, which was conducted as part of prototype development of such actuators studied and built for NASA-Johnson Space Center as a prospective alternative to hydraulic actuators presently used in shuttle orbiter applications. The resulting numerical simulations of the various machine and power conditioner current and voltage waveforms gave excellent correlation to the actual waveforms collected from actual hardware experimental testing. These results, numerical and experimental, are presented here for machine motoring, regeneration and dynamic braking modes. Application of the resulting model to the determination of machine current and torque profiles during closed-loop actuator operation were also analyzed and the results are given here. These results are given in light of an overall view of the actuator system components. The applicability of this method of analysis to design optimization and trouble-shooting in such prototype development is also discussed in light of the results at hand.
The Scenario Creation and Simulation Process (SCASP) includes the following steps: 1) Write Requirements; 2) Write Use Cases; 3) Prioritize Use Cases; 4) Write Nominal Scenarios; 5) Identify Relationships; 6) Refine/Generalize Scenarios; 7) Transform to State Machines. SCASP provides thorough simulation of use cases before design/implementation, resulting in: 1) Reduced cost; 2) Fewer misunderstandings; 3) Reuse of executable form of use cases. SCASP gives systematic guidelines on how to 1) Separate concerns in use case descriptions; 2) Elicit non-nominal scenarios (alternatives, exceptions, concurrent scenarios, etc.); 3) Transform those scenarios automatically into a set of concurrent state machines; 4) Execute those state machines, i.e., scenario simulation.
In this paper numerical calculations are presented for the steady-periodic temperature in layered materials and functionally-graded materials to simulate photothermal methods for the measurement of thermal properties. No laboratory experiments were performed. The temperature is found from a new Green s function formulation which is particularly well-suited to machine calculation. The simulation method is verified by comparison with literature data for a layered material. The method is applied to a class of two-component functionally-graded materials and results for temperature and sensitivity coefficients are presented. An optimality criterion, based on the sensitivity coefficients, is used for choosing what experimental conditions will be needed for photothermal measurements to determine the spatial distribution of thermal properties. This method for optimal experiment design is completely general and may be applied to any photothermal technique and to any functionally-graded material.
The Man-Machine Interaction Design and Analysis System (MIDAS) under joint U.S. Army and NASA cooperative is intended to assist designers of complex human/automation systems in successfully incorporating human performance capabilities and limitations into decision and action support systems. MIDAS is a computational representation of multiple human operators, selected perceptual, cognitive, and physical functions of those operators, and the physical/functional representation of the equipment with which they operate. MIDAS has been used as an integrated predictive framework for the investigation of human/machine systems, particularly in situations with high demands on the operators. We have extended the human performance models to include representation of both human operators and intelligent aiding systems in flight management, and air traffic service. The focus of this development is to predict human performance in response to aiding system developed to identify aircraft conflict and to assist in the shared authority for resolution. The demands of this application requires representation of many intelligent agents sharing world-models, coordinating action/intention, and cooperative scheduling of goals and action in an somewhat unpredictable world of operations. In recent applications to airborne systems development, MIDAS has demonstrated an ability to predict flight crew decision-making and procedural behavior when interacting with automated flight management systems and Air Traffic Control. In this paper, we describe two enhancements to MIDAS. The first involves the addition of working memory in the form of an articulatory buffer for verbal communication protocols and a visuo-spatial buffer for communications via digital datalink. The second enhancement is a representation of multiple operators working as a team. This enhanced model was used to predict the performance of human flight crews and their level of compliance with commercial aviation communication procedures. We show how the data produced by MIDAS compares with flight crew performance data from full mission simulations. Finally, we discuss the use of these features to study communication issues connected with aircraft-based separation assurance.
There are no author-identified significant results in this report.
When human operators are performing precision tracking tasks, their dynamic response can often be modeled by quasilinear describing functions. That fact permits analysis of the effects of delay in certain man machine control systems using linear control system analysis techniques. The analysis indicates that a reduction in system stability is the immediate effect of additional control system delay, and that system characteristics moderate or exaggerate the importance of the delay. A selection of data (simulator and flight test) consistent with the analysis is reviewed. Flight simulator visual-display delay compensation, designed to restore pilot aircraft system stability, was evaluated in several studies which are reviewed here. The studies range from single-axis, tracking-task experiments (with sufficient subjects and trials to establish the statistical significance of the results) to a brief evaluation of compensation of a computer generated imagery (CGI) visual display system in a full six degree of freedom simulation. The compensation was effective, improvements in pilot performance and workload or aircraft handling qualities rating (HQR) were observed. Results from recent aircraft handling qualities research literature, which support the compensation design approach, are also reviewed.
G-View is a 3D visualization tool for supporting spacecraft guidance, navigation, and control (GN&C) simulations relevant to small-body exploration and sampling (see figure). The tool is developed in MATLAB using Virtual Reality Toolbox and provides users with the ability to visualize the behavior of their simulations, regardless of which programming language (or machine) is used to generate simulation results. The only requirement is that multi-body simulation data is generated and placed in the proper format before applying G-View.
Method for on-line simulation of electric networks - computer program for design tool in man-machine interaction
Modern buildings are being equipped with increasingly sophisticated power and control systems with substantial capabilities for monitoring and controlling the amenities. Operational problems associated with heating, ventilation, and air-conditioning (HVAC) systems plague many commercial buildings, often the result of degraded equipment, failed sensors, improper installation, poor maintenance, and improperly implemented controls. Most existing HVAC fault-diagnostic schemes are based on analytical models and knowledge bases. These schemes are adequate for generic systems. However, real-world systems significantly differ from the generic ones and necessitate modifications of the models and/or customization of the standard knowledge bases, which can be labor intensive. Data-driven techniques for fault detection and isolation (FDI) have a close relationship with pattern recognition, wherein one seeks to categorize the input-output data into normal or faulty classes. Owing to the simplicity and adaptability, customization of a data-driven FDI approach does not require in-depth knowledge of the HVAC system. It enables the building system operators to improve energy efficiency and maintain the desired comfort level at a reduced cost. In this article, we consider a data-driven approach for FDI of chillers in HVAC systems. To diagnose the faults of interest in the chiller, we employ multiway dynamic principal component analysis (MPCA), multiway partial least squares (MPLS), and support vector machines (SVMs). The simulation of a chiller under various fault conditions is conducted using a standard chiller simulator from the American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE). We validated our FDI scheme using experimental data obtained from different types of chiller faults.