Magnetocaloric Generator for Waste Heat Energy Recovery
Explore the source record for details and available documents.
15 GEOTHERMAL ENERGY↗
SEARCH · Search NASA
Results for “Magnetocaloric materials”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
From the Discovery of the Giant Magnetocaloric Effect to the Development of High‐Power‐Density Systems
Caloric cooling and heating promise an efficient and reliable alternative to ubiquitous vapor-compression technology. In 1976, the very first near-room-temperature caloric system is developed, but it took another 20 years for this technology to fully bloom and gain global attention. The discovery of the giant magnetocaloric effect in Gd 5 Si 2 Ge 2 and the advance of the first long-operating magnetic refrigerator, both in 1997, due to the Ames National Laboratory and Astronautics Corporation of America cooperation, are two milestones that sparked ongoing interest in caloric research, which continues to thrive to this day. This review presents a brief history of caloric heat pumping, from the discovery of the magnetocaloric effect to the most recent developments in materials and systems. The contributions of Ames National Laboratory of the U.S. Department of Energy are highlighted, celebrating its 30-year anniversary in caloric research and paying tribute to two outstanding scientists, Vitalij K. Pecharsky and Karl A. Gschneidner, Jr., who inspired the caloric community for decades. The paper concludes with insights into remaining research and development challenges that must be addressed to enable the market transition of caloric technology and its widespread adoption.
caloric materials↗
Study on the magnetothermal properties of the D y 1 - x T b x A l 2 series of compounds
Here, in this work, we developed a theoretical model Hamiltonian, in the mean field approximation, to describe the magnetic and magnetocaloric behavior of the series of compounds Dy 1-x Tb x Al 2 (x = 0.00, 0.15, 0.25, 0.30, 0.35, 0.40 and 0.75). We adjusted the exchange parameters λ DyDy , λ TbTb , and λ DyTb to obtain the spin reorientation temperatures (T SR ) and the critical temperature (T C ) for each compound in the series. The results obtained by the Hamiltonian model agree satisfactorily with the experimental results. The heat capacity curves with and without an applied magnetic field, adiabatic temperature variation and isothermal entropy variation were modeled and compared with the experimental data. As the experimental results show, our model was also able to reproduce the change in the spin reorientation process: a first order spin reorientation transition appears for concentrations x = 0.15, 0.25, 0.30, 0.35, and no spin reorientation transitions after x = 0.40.
36 MATERIALS SCIENCE↗
Competing magnetic interactions and emergent phase diagrams in double perovskite Y 2 Ni x Co 1–x MnO 6
We present a comparative study of double perovskites Y 2 Ni x Co 1–x MnO 6 for x = 1, 0.5, and 0. The polycrystalline samples of Y 2 Ni x Co 1–x MnO 6 with space group P2 1 /n were synthesized via sol-gel technique. X-ray photoelectron spectroscopy (XPS) confirms the presence of majority Ni 2+ /Mn 4+ in Y 2 NiMnO 6 (YNMO) and a mixed valence state Ni 2+/3+ /Co 2+/3+ /Mn 4+/3+ in co-doped Y 2 Ni 0.5 Co 0.5 MnO 6 (YNCMO). The temperature dependent magnetization results suggest homogeneous substitution of Ni ions with Co ions with minimal contribution of 3+ cationic magnetic interactions in YNCMO. The superexchange ferromagnetic (FM) interaction has a major contribution to the magnetism of YNMO. The strength of antiferromagnetic (AFM) coupling resulting from the antiphase boundaries in Y 2 Ni x Co 1–x MnO 6 increases with the increase in the Co concentration. The AC susceptibility (AC-χ) study further validates the presence of higher density of antiphase boundaries, which is reflected by the dynamics of domain walls in YNCMO. The isothermal magnetic entropy change (ΔS M ) as functions of temperature and magnetic field is exploited to assess the stabilization of different magnetic phases. Finally, the findings of ΔS M (T,µ 0 H) lead to the proposed new magnetic phase diagrams for Y 2 Ni x Co 1–x MnO 6 for x = 1 and 0.5, in comparison with the previously established phase diagram of Y 2 CoMnO 6 .
36 MATERIALS SCIENCE↗
Tunable structural and magnetic properties of NiAs-type Mn x Sb (1.00≤x≤1.30) compounds
Mn-based alloys can exhibit a variety of magnetic properties related to their tunable exchange interactions. Here, structural and magnetic properties of hexagonal NiAs-type Mn x Sb (1.00≤x≤1.30) compounds are studied with a combination of X-ray diffraction, neutron diffraction, and magnetic measurements. It is found that the magnetization, Curie temperature, and magnetocrystalline anisotropy of Mn x Sb compounds can be tuned by controlling Mn concentration and doping at interstitial (2d) sites. With increasing Mn concentration, magnetic moments of Mn atoms decrease and deviate gradually from the ab-plane to the c-axis for 1.20≤x≤1.22 at room temperature, which leads to a decrease of the Curie temperature T c and the spin reorientation temperature T SR . By doping with nonmagnetic elements, a substantial room-temperature magnetocaloric effect without magnetic hysteresis was achieved for Mn 1.12 Zr 0.1 Sb compound, which is highly beneficial to the practical magnetic refrigeration application.
36 MATERIALS SCIENCE↗
Bulk-like first-order magnetoelastic transition in FeRh particles
Near-equiatomic, chemically-ordered iron-rhodium (FeRh) alloy is a fundamentally interesting material that may become useful in niche applications making use of its unique magneto functional phenomena, for example, the giant inverse magnetocaloric effect near room temperature that is associated with a sharp first-order magnetic phase transition. The nearly discontinuous antiferromagnetic-ferromagnetic phase transformation in bulk FeRh is well-known; however, the transition broadens considerably in fine particles and films with thickness less than 50 nm, precluding their potential applications. Here, we report an abrupt, bulk-like first-order magnetoelastic transformation in powders consisting of sub-micron particles of nearly equiatomic FeRh compound synthesized via solid-state mechanochemical co-reduction of FeF 2 and RhCl3 and subsequent heat treatments. In this work, we demonstrate that annealing at temperatures ranging from 600 °C to 800 °C enables tailoring phase content, particle size, and magnetic properties of the powders. A maximum magnetic-field-induced entropy change of ~10 J/kg K at μ0ΔH = 1 T has been achieved in powders annealed at 800 °C. The retention of extraordinary responsiveness in sub-micron particles of FeRh is likely to open doors for system component fabrication using additive manufacturing methods, along with new opportunities to employ FeRh in theranostics.
36 MATERIALS SCIENCE↗
Depicting the roles of CuO secondary phase and heat treatment in driving the magnetic and magnetocaloric features of Pr 2/3 Sr 1/3 MnO 3 manganite
In this work, we report a detailed experimental study regarding the impact of copper oxide (CuO) secondary phase and heat treatments on the structural, magnetic, and magnetocaloric properties of the near-room temperature Pr 2/3 Sr 1/3 MnO 3 (PSMO) magnetic refrigerant. Our investigations are carried out by using structural and microstructural analyses, alongside magnetization measurements. Here, the analysis of X-ray diffraction data of PSMO(95%)-CuO(5%) (PSMO-CuO) samples shows the coexistence of both CuO and PSMO phases. Further, the microstructural analysis of PSMO-CuO reveals that the addition of CuO significantly enhances the grains size. On the other hand, the added secondary phase markedly reduces the Curie temperature (T c ) from 293 K for PSMO to about 273 K for PSMO-CuO composite while increasing the magnetocaloric effect. This decrease in T c is associated with a significant change from 162° to about 156° in the Mn-OII-Mn bond angle respectively. Moreover, performed investigations regarding the role of heat treatments unveil that the observed changes in the structural and magnetic features are mainly driven by the secondary phase that modify grains size and double-exchange interactions in the PSMO compound. Interestingly, our findings demonstrate that the Curie temperature of the PSMO and accordingly its magnetocaloric effect can be tailored by adding small amounts of CuO without need to substitution on cation sites. In the light of obtained results, a multilayered refrigerant composed of PSMO and PSMO-CuO is proposed to cover the magnetic cooling temperature range close to room-temperature. The resulting entropy change remains practically constant between 273 K and 293 K. Such a behavior is highly appreciated from a practical point of view, particularly in cases where the cooling process is carried out by using the AMR and Ericsson cycles.
36 MATERIALS SCIENCE↗
Magnetoelastic transition and magnetocaloric effect in induction melted Fe 100-x Rh x bulk alloys with x = 50, 51
Magnetoelastic transitions (METs) in bulk in nearly equiatomic Fe-Rh alloys produced by arc melting may show poor reproducibility related to insufficient chemical homogeneity and presence of impurity phases in variable concentrations. To better understand the synthesis conditions that reliably yield bulk FeRh materials with reproducible MET characteristics, Fe 100-x Rh x alloys with x = 50, 50.5 and 51 at. % were prepared by induction melting and thermal annealing under identical conditions. The fabricated samples were cut into several slices, followed by characterization of METs in each of the slices using isothermal and isofield magnetization measurements, differential scanning calorimetry, and direct measurements of the magnetocaloric effect. All of the slices exhibit METs between the AFM and FM states, but the transitions are abrupt with nearly the same change of magnetization, ΔM, when x = 50.5 and 51, whereas for the x = 50 alloy the transition spreads over a wide temperature interval and ΔM may fluctuate by as much as 10 % from one specimen to another. A comparison of the magnetocaloric responses of x = 50 and 51 materials is presented. The clearly different effect of the magnetic field on the transition in both directions leads to significant differences in the reversibility and maximum values of the magnetic field-induced entropy and adiabatic temperature changes, as well as average hysteresis losses. In terms of reproducibility, our results suggest that induction melting is a more appropriate technique to prepare these binary alloys.
36 MATERIALS SCIENCE↗
Effect of Melt-Spinning Parameters on the Structure and Properties of Ni 55.5 Mn 18.8 Ga 24 Si 1.7 Heusler Alloy Ribbons
Ni–Mn-based Heusler alloys are known to demonstrate magnetic shape memory and giant magnetocaloric effect (MCE). These effects depend on the phases, crystallographic and magnetic phase transitions, and the crystallographic texture characteristics. These structural characteristics, in turn, are a function of the processing parameters. In the current work, Ni 55.5 Mn 18.8 Ga 24 Si 1.7 Heusler alloy was processed by melt-spinning under a helium atmosphere. This process results in a fine microstructure. The ribbon that was produced with a narrower nozzle width, faster wheel speed, and higher cast temperature, indicating a faster cooling rate, had double the magnetic entropy change close to room temperature. However, the other ribbon demonstrated a large entropy change over a broader temperature range, extending its usability. The effect of the melt-spinning process parameters on the developing microstructure, crystallographic structure and texture, transformation temperatures, and the magnetic entropy change were studied to explain the difference in magnetocaloric behavior.
36 MATERIALS SCIENCE↗
Magnetothermal properties of Tm x Dy 1- x Al 2 ( x = 0.25, 0.50 and 0.75)
Here, we describe magnetic, thermal, and magnetocaloric properties of rare earth intermetallic compounds Tm x Dy 1-x Al 2 with 0.25, 0.5 and 0.75. Using model Hamiltonian we consider contributions of the crystalline electric field anisotropy in both Tm and Dy magnetic sublattices, disorder in exchange interactions among Tm-Tm, Dy-Dy and Tm-Dy magnetic ions, and the Zeeman effect. Employing earlier reported and new experimental measurements, we first determine a single free variable – the intersublattice magnetic exchange parameter – to properly model the temperature and magnetic field dependencies of heat capacity and magnetization, and then use the modeling results to explain the emergence of an anomalous spin reorientation transition and its influence on the magnetocaloric effect in the title compounds. Theoretical results agree with experimental data reasonably well.
36 MATERIALS SCIENCE↗
Studies on magnetocaloric effect of Tb 2 Ni 0.90 Si 2.94 compound
A comparative study has been carried out on the magnetocaloric properties of as-cast and annealed Tb 2 Ni 0.90 Si 2.94 intermetallic compound. While the as-cast material exhibits ferromagnetic cluster-glass behaviour below 9.9 K coexisting with antiferromagnetic (AFM) interaction, the annealed system shows AFM ordering below 13.5 K and spin freezing occurs below 4 K. The compound exhibits moderate magnetocaloric performance with maximum isothermal entropy changes (–ΔS M ) 8.8 and 10.9 J kg –1 K –1 , relative cooling power (RCP) 306 and 365 J kg –1 , along with adiabatic temperature change (ΔT ad ) 5.5 and 8.15 K for 70 kOe magnetic field change in as-cast and annealed forms, respectively. The estimated magnetic entropy change is found to be larger for annealed sample in comparison to that of as-cast analogue. However, the full width at half maxima (FWHM) of –ΔS M (T) behaviour is larger in as-cast compound due to the presence of inherent structural disorder which reduces with thermal annealing. A positive isothermal entropy change (–ΔS M ) and adiabatic temperature change (ΔT ad ) is observed for the as-cast compound in the measured field and temperature region. In contrast, the annealed system exhibits inverse magnetocaloric effect in the low field and temperature region where AFM interactions dominate. Magnetocaloric effect (MCE) is used as a tool to establish a subtle correlation between the observed magnetocaloric effect and the reported magnetic properties of the system.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Anisotropic magneto-resistivity and magnetocaloric effect in DyAl 2
Here, in this study, we experimentally and theoretically investigate the correlation between the anisotropic magnetic resistivity and magnetocaloric effect in DyAl 2 single crystals. DyAl 2 crystallizes in the C15 Laves phase structure with cubic symmetry. While some earlier studies revealed that the isothermal entropy change in dialuminides follows a similar trend as the electrical resistivity change as a function of temperature and magnetic field, the correlation between anisotropic behavior of these two physical parameters is yet to be explored to the best of our knowledge. To address this gap, we measured electrical resistivity of DyAl 2 single crystals along two different directions in zero and applied magnetic fields and compared the experimental results with our theoretical model. For the theoretical analysis, we employed a model Hamiltonian in the mean-field approximation, considering the exchange interaction, Zeeman effect, and crystalline electric field associated with the cubic symmetry. Our findings reveal a significant dependence of DyAl 2 resistivity on the direction of the applied magnetic field, in agreement with our theoretical results. These outcomes emphasize the interplay between magnetocaloric effect and magneto-resistivity, underscoring the potential of the magnetocaloric effect as a valuable tool for gaining deeper insights into basic physical properties including electron transport behavior.
36 MATERIALS SCIENCE↗
Correlation between complex spin textures and the magnetocaloric and Hall effects in Eu(Ga 1−𝑥 Al 𝑥 ) 4 (𝑥=0.9, 1)
Determining the electronic phase diagram of a quantum material as a function of temperature (𝑇) and applied magnetic field (𝐻) forms the basis for understanding the microscopic origin of transport properties, such as the anomalous Hall effect (AHE) and topological Hall effect (THE). For many magnetic quantum materials, including EuAl 4 , a THE arises from a topologically protected magnetic skyrmion lattice with a nonzero scalar spin chirality. We identified a square skyrmion lattice (sSkL) peak in Eu(Ga 1−𝑥 Al 𝑥 ) 4 (𝑥=0.9) identical to the peak previously observed in EuAl 4 by performing neutron-scattering measurements throughout the phase diagram. Here, comparing these neutron results with transport measurements, we found that in both compounds the maximal THE does not correspond to the sSkL area. Instead of the maximal THE, the maximal magnetocaloric-effect boundaries better identify the sSkL lattice phase observed by neutron-scattering measurements. The maximal THE therefore arises from interactions of itinerant electrons with frustrated spin fluctuations in a topologically trivial magnetic state.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Temperature-independent giant dielectric response in transitional BaTiO 3 thin films
Ferroelectric materials exhibit the largest dielectric permittivities and piezoelectric responses in nature, making them invaluable in applications from supercapacitors or sensors to actuators or electromechanical transducers. The origin of this behavior is their proximity to phase transitions. However, the largest possible responses are most often not utilized due to the impracticality of using temperature as a control parameter and to operate at phase transitions. This has motivated the design of solid solutions with morphotropic phase boundaries between different polar phases that are tuned by composition and that are weakly dependent on temperature. Thus far, the best piezoelectrics have been achieved in materials with intermediate (bridging or adaptive) phases. But so far, complex chemistry or an intricate microstructure has been required to achieve temperature-independent phase-transition boundaries. Here, we report such a temperature-independent bridging state in thin films of chemically simple BaTiO3. A coexistence among tetragonal, orthorhombic, and their bridging low-symmetry phases are shown to induce continuous vertical polarization rotation, which recreates a smear in-transition state and leads to a giant temperature-independent dielectric response. The current material contains a ferroelectric state that is distinct from those at morphotropic phase boundaries and cannot be considered as ferroelectric crystals. We believe that other materials can be engineered in a similar way to contain a ferroelectric state with gradual change of structure, forming a class of transitional ferroelectrics. Similar mechanisms could be utilized in other materials to design low-power ferroelectrics, piezoelectrics, dielectrics, or shape-memory alloys, as well as efficient electro- and magnetocalorics.
36 MATERIALS SCIENCE↗
Influence of the external pressure on the structure and magnetic properties of Nd 0.5 Sr 0.5 CoO 3 cobaltite
Not Available
36 MATERIALS SCIENCE↗
Multicaloric MnNiSi alloys
A multicaloric alloy material combines two isostructural compounds, the first compound being MnNiSi and the second compound being either MnFeGe or CoFeGe, each such compound having extremely different magnetic and thermo-structural properties. The resulting alloy material (MnNiSi)1-x(MnFeGe)x or (MnNiSi)1-x(CoFeGe)x possesses extraordinary magnetocaloric and/or barocaloric properties with an acute sensitivity to applied pressure and no appreciable magnetic hysteresis losses.
Samanta, Tapas↗
Magnetization distribution in Cu 0.6 Mn 2.4 Ge 2 ferromagnet from polarized and non-polarized neutron powder diffraction aided by density-functional theory calculations
The crystal structure and magnetic properties of Cu 0.6 Mn 2.4 Ge 2 have been re-investigated by a combination of extensive magnetic measurements and neutron scattering experiments, aided by electronic structure calculations. The material is found to be a soft ferromagnet with the ordering temperature T C = 316 K. The magnetocaloric effect evaluated from field-dependent magnetization isotherms is equal to 1.2 J/(kg·K) and 2.5 J/(kg·K) under the maximum applied magnetic field of 2 T and 5 T, respectively. The compound crystallizes in the hexagonal space group P6 3 /mmc. A complex structural disorder necessitated testing of several disorder models against the results of non-polarized and polarized neutron scattering experiments and magnetization measurements. Simulations at the density-functional theory level were also performed to identify the most robust solution that properly described the data observed. The final magnetic structure model reveals non-equal magnetic moments on the Mn1 and Mn2 atoms (2.29(9) µ B and 2.7(1) µ B , respectively) and the presence of vacancies and minor Cu substitution defects in both Mn sites. The work demonstrates how the non-polarized and polarized neutron scattering methods can be combined with electronic structure calculations to establish the microscopic structure of magnetic materials with complex crystallographic disorder.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
External-Field-Induced Phase Transformation and Associated Properties in a Ni 50 Mn 34 Fe 3 In 13 Metamagnetic Shape Memory Wire
Metamagnetic shape memory alloys exhibit a series of intriguing multifunctional properties and have great potential for applications in magnetic actuation, sensing and magnetic refrigeration. However, the poor mechanical properties of these alloys with hardly any tensile deformability seriously limit their practical application. In the present work, we developed a Ni-Fe-Mn-In microwire that exhibits both a giant, tensile superelasticity and a magnetic-field-induced first-order phase transformation. The recoverable strain of superelasticity is more than 20% in the temperature range of 233–283 K, which is the highest recoverable strain reported heretofore in Ni-Mn-based shape memory alloys (SMAs). Moreover, the present microwire exhibits a large shape memory effect with a recoverable strain of up to 13.9% under the constant tensile stress of 225 MPa. As a result of the magnetic-field-induced first-order phase transformation, a large reversible magnetocaloric effect with an isothermal entropy change ΔS m of 15.1 J kg –1 K –1 for a field change from 0.2 T to 5 T was achieved in this microwire. The realization of both magnetic-field and tensile-stress-induced transformations confers on this microwire great potential for application in miniature multi-functional devices and provides an opportunity for multi-functional property optimization under coupled multiple fields.
36 MATERIALS SCIENCE↗