Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maximum Allowable Concentration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Trace Contaminant Control for the International Space Station's Node 1- Analysis, Design, and Verification

Trace chemical contaminant generation inside crewed spacecraft cabins is a technical and medical problem that must be continuously evaluated. Although passive control through materials selection and active control by adsorption and catalytic oxidation devices is employed during normal operations of a spacecraft, contaminant buildup can still become a problem. Buildup is particularly troublesome during the stages between the final closure of a spacecraft during ground processing and the time that a crewmember enters for the first time during the mission. Typically, the elapsed time between preflight closure and first entry on orbit for spacecraft such as Spacelab modules was 30 days. During that time, the active contamination control systems are not activated and contaminants can potentially build up to levels which exceed the spacecraft maximum allowable concentrations (SMACs) specified by NASA toxicology experts. To prevent excessively high contamination levels at crew entry, the Spacelab active contamination control system was operated for 53 hours just before launch.

Perry, J. L.↗

Gas Effluent Analysis of the Heat Melt Compactor

The Heat Melt Compactor (HMC) reduces volume, heat sterilizes, stabilizes, and manages gas and water effluent of the International Space Station (ISS) trash. Processing the trash at high temperatures produces volatile gas compounds that need to be treated before venting to cabin and/or the Vacuum Exhaust System (VES) in the ISS. The release of gases may not meet the Spacecraft Maximum Allowable Concentrations (SMAC) requirement, if vented directly into cabin, and/or gases are incompatible for venting to the VES. In order to assess the HMC gas release and venting parameters, effluent gas analysis is conducted to determine contaminant load. This paper will analyze different collection and analytical methods of the effluent gas, and report corresponding data, such that these results can be used for process design and effluent management.

Heat Melt Compactor↗

Retrospectives: Current State of Knowledge on the Intersection of Spaceflight Stressors and Microbial Risks to Crew and Craft

OVERVIEW The spaceflight environment has several unique stressors that affect the health of both the crew and the spacecraft. An area of continued, albeit incomplete, study is the interaction of these stressors on microbial populations inherent to both astronauts and spacecraft surfaces and systems. A primary concern is the potential for the spaceflight environment to perturb the phenotype of these populations towards negative outcomes for crew and craft. In order to effectively mitigate these potential risks, they must first be characterized. We performed a retrospective literature analysis to assess the current state of knowledge regarding the affects of ionizing radiation and elevated CO2 on relevant microbial populations. The results of these retrospectives will guide next steps in the decisions of what (if any) further studies should be pursued and to guide decisions of the need for countermeasures. STRESSORS Ionizing radiation. The health risk involved with increased exposure to cosmic radiation has been studied in crew for 35+ years, with human health and cancer risk being the main focus. However, space radiation could also affect both the resident microorganisms aboard the ISS and the normal, healthy astronaut microbiomes that are of direct concern for crew health. A retrospective review of over 250 publications was accomplished looking at the impact of cumulative ionizing radiation doses lower than 3 Gy (chronic or acute) on microbial populations. Elevated CO2. The health risk involved with elevated atmospheric CO2 in spacecraft, primarily focusing on human toxicological risks, is understudied. The current Spaceflight Maximum Allowance Concentration for 24-hour average CO2 is 0.4% (3 mm Hg), which is significantly higher than terrestrial levels (0.04%). Whether these elevated ambient CO2 levels aboard spacecraft influence the diversity and phenotypic responses of the resident microbial communities from both the spacecraft environment (air, surface, water) and crew members (gut, nasal, skin microbiomes) is not known. A retrospective review was accomplished looking at the impact of chronic CO2 exposure up to 0.7% (5 mm Hg) for up to 6 months and acute exposure up to 2.6% (20 mm Hg) for up to 24 hours. CONCLUSIONS: MICROBIOME OF THE BUILT ENVIRONMENT The microbiome of the built spacecraft environment has been sampled consistently over the course of human spaceflight and significant advancements have been made in identifying microbial populations on the ISS. The dominant source of microbes on spacecraft surfaces are human-derived. Once in the spacecraft built environment, the extreme environment selects for features that enhance survival. While efforts to understand potential antibiotic resistance and pathogenicity of ISS isolates is robust, there is little to no understanding of which spaceflight environmental stressors, to include ionizing radiation or elevated CO2, drive the evolutionary trajectory of spacecraft-associated microbial populations. CONCLUSIONS: MICROBE-HOST INTERACTIONS The host-microbiome field has emerged as an important factor in human health on Earth as well in spaceflight. The field is struggling with the complexity of the system under investigation as there is substantial taxonomic and functional heterogeneity in these communities, making it difficult to establish clear stimulus-response dynamics. Taxonomic characterization is the norm; however, the functional role of each community member is key to linking environmental perturbations to potential dysbiosis. For both ionizing radiation and elevated CO2, the likely target of the perturbation is the host tissue, not the microbes themselves.. Any resulting changes to the microbial community composition and/or function is likely a result of adapting to those changes in the host physiology. RECOMMENDATIONS Emphasize functional characterization as opposed to taxonomic characterization of microbial communities. Increase the number of investigations using chronic, spaceflight-relevant doses of ionizing radiation. MoBE studies should move away from observational studies towards predictive modeling of community dynamics. Continue to develop scale-down models, such as tissues-on-a-chip & defined microbial communities. Focus on the crew response to elevated CO2 over MoBE considerations. Assess how direct contact with the hypercapnic environment affects skin microbiome dynamics.

retrospective↗

Source Contaminant Control System Design, Operation, and Testing for the Trash Compaction and Processing System

The Trash Compaction and Processing System (TCPS) aims to reduce volume, biologically safen, physically stabilize, manage effluents, and recover resources from astronaut trash in the International Space Station (ISS). This process involves heating the trash to high temperatures, which in turn releases gaseous contaminants. Effluent management scenarios involve releasing these gases back to the ISS cabin after processing and/or directly venting these gases out to space via the Vacuum Exhaust System (VES). Concerns for recovering the gases back to cabin are crew health, safety, and spacecraft environmental impact. The Heat Melt Compactor (HMC) at NASA Ames Research Center (ARC) serves as a test system that supports TCPS development by conducting risk reduction activities associated with an ISS flight demonstration. Previous gas effluent studies were conducted on the HMC. The results consisted of contaminants from the trash exhaust to exceed Spacecraft Maximum Allowable Concentrations (SMAC), which are selected airborne contaminants that can elicit toxicity symptoms to crewmembers via exposure. The Source Contaminant Control System (SCCS) aims to reduce that risk by converting the contaminants into carbon dioxide (CO2) and water (H2O) vapor. The SCCS is composed of a carbon adsorbent bed, to avoid catalyst poisoning, and a catalytic oxidizer (CatOx), which promotes oxidation of the contaminants to CO2 and H2O. In turn, the gases coming out of the SCCS should be compatible to the ISS cabin and systems such as the Trace Contaminant Control System (TCCS). Preparation for SCCS testing alongside the HMC Gen 3 are currently underway at ARC. The main objectives are to evaluate CatOx efficiency by CO2 conversion and characterize effectiveness of removal by comparing contaminant results before and after CatOx. This paper will report on the SCCS design, operation, and testing with results.

Janine Young↗

Retrospectives: Intersection of Spaceflight Stressors and Microbial Risk to Crew and Craft

OVERVIEW The spaceflight environment has several unique stressors that affect the health of both the crew and the spacecraft. An area of continued, albeit incomplete, study is the interaction of these stressors on microbial populations inherent to both astronauts and spacecraft surfaces and systems. A primary concern is the potential for the spaceflight environment to perturb the phenotype of these populations towards negative outcomes for crew and craft. In order to effectively mitigate these potential risks, they must first be characterized. We performed a retrospective literature analysis to assess the current state of knowledge regarding the affects of ionizing radiation and elevated CO2 on relevant microbial populations. The results of these retrospectives will guide next steps in the decisions of what (if any) further studies should be pursued and to guide decisions of the need for countermeasures. STRESSORS Ionizing radiation. The health risk involved with increased exposure to cosmic radiation has been studied in crew for 35+ years, with human health and cancer risk being the main focus. However, space radiation could also affect both the resident microorganisms aboard the ISS and the normal, healthy astronaut microbiomes that are of direct concern for crew health. A retrospective review of over 250 publications was accomplished looking at the impact of cumulative ionizing radiation doses lower than 3 Gy (chronic or acute) on microbial populations. Elevated CO2. The health risk involved with elevated atmospheric CO2 in spacecraft, primarily focusing on human toxicological risks, is understudied. The current Spaceflight Maximum Allowance Concentration for 24-hour average CO2 is 0.4% (3 mm Hg), which is significantly higher than terrestrial levels (0.04%). Whether these elevated ambient CO2 levels aboard spacecraft influence the diversity and phenotypic responses of the resident microbial communities from both the spacecraft environment (air, surface, water) and crew members (gut, nasal,skin microbiomes) is not known. A retrospective review was accomplished looking at the impact of chronic CO2 exposure up to 0.7% (5 mm Hg) for up to 6 months and acute exposure up to 2.6% (20 mm Hg) for up to 24 hours. CONCLUSIONS: MICROBIOME OF THE BUILT ENVIRONMENT The microbiome of the built spacecraft environment has been sampled consistently over the course of human spaceflight and significant advancements have been made in identifying microbial populations on the ISS. The dominant source of microbes on spacecraft surfaces are human-derived. Once in the spacecraft built environment,the extreme environment selects for features that enhance survival. While efforts to understand potential antibiotic resistance and pathogenicity of ISS isolates is robust, there is little to no understanding of which spaceflight environmental stressors, to include ionizing radiation or elevated CO2, drive the evolutionary trajectory of spacecraft-associated microbial populations. CONCLUSIONS: MICROBE-HOST INTERACTIONS The host-microbiome field has emerged as an important factor in human health on Earth as well in spaceflight. The field is struggling with the complexity of the system under investigation as there is substantial taxonomic and functional heterogeneity in these communities, making it difficult to establish clear stimulus-response dynamics.Taxonomic characterization is the norm; however, the functional role of each community member is key to linking environmental perturbations to potential dysbiosis. For both ionizing radiation and elevated CO2, the likely target of the perturbation is the host tissue, not the microbes themselves.. Any resulting changes to the microbial community composition and/or function is likely a result of adapting to those changes in the host physiology. RECOMMENDATIONS Emphasize functional characterization as opposed to taxonomic characterization of microbial communities.Increase the number of investigations using chronic, spaceflight-relevant doses of ionizing radiation. MoBE studies should move away from observational studies towards predictive modeling of community dynamics. Continue to develop scale-down models, such as tissues-on-a-chip & defined microbial communities. Focus on the crew response to elevated CO2 over MoBE considerations. Assess how direct contact with the hypercapnic environment affects skin microbiome dynamics.

Countermeasures↗

Source Contaminant Control System Design, Operation, and Testing for the Trash Compaction and Processing System

The Trash Compaction and Processing System (TCPS) aims to reduce volume, biologically safen, physically stabilize, manage effluents, and recover resources from astronaut trash in the International Space Station (ISS). This process involves heating the trash to high temperatures, which in turn releases gaseous contaminants. Effluent management scenarios involve releasing these gases back to the ISS cabin after processing and/or directly venting these gases out to space via the Vacuum Exhaust System (VES). Concerns for recovering the gases back to cabin are crew health, safety, and spacecraft environmental impact. The Heat Melt Compactor (HMC) at NASA Ames Research Center (ARC) serves as a test system that supports TCPS development by conducting risk reduction activities associated with an ISS flight demonstration. Previous gas effluent studies were conducted on the HMC. The results consisted of contaminants from the trash exhaust to exceed Spacecraft Maximum Allowable Concentrations (SMAC), which are selected airborne contaminants that can elicit toxicity symptoms to crewmembers via exposure. The Source Contaminant Control System (SCCS) aims to reduce that risk by converting the contaminants into carbon dioxide (CO2) and water (H2O) vapor. The SCCS is composed of a carbon adsorbent bed, to avoid catalyst poisoning, and a catalytic oxidizer (CatOx), which promotes oxidation of the contaminants to CO2and H2O. In turn, the gases coming out of the SCCS should be compatible to the ISS cabin and systems such as the Trace Contaminant Control System (TCCS). Preparation for SCCS testing alongside the HMC Gen 3 are currently underway at ARC. The main objectives are to evaluate CatOx efficiency by CO2conversion and characterize effectiveness of removal by comparing contaminant results before and after CatOx. This paper will report on the SCCS design, operation, and testing with results.

TCPS↗

High Risk Spacecraft Materials Offgassing

NASA-STD-6001B, Determination of Offgassed Products (Test 7), provides the offgassing characteristics under standardized conditions for materials and assembled articles to be located within habitable spacecraft environments. Experience with Test 7 has found certain material types to be of higher risk for offgassing undesirable compounds aboard spacecraft than others. Formaldehyde and acrolein are historically high T value offgassed components of the offgassed compound target list because they have low spacecraft maximum allowable concentration (SMAC) values assigned by the JSC Toxicology Group. Carbon disulfide, benzene, acrylonitrile, and furan are additional target compounds of concern due to their lower thresholds of toxicity as determined by the JSC Toxicology Group. Materials offgassing siloxanes are also of concern due to their degradation effects on environmental control and life support system (ECLSS) components and performance. Spacecraft materials and articles defined in this manuscript as high risk were identified after examining and condensing data for these compounds of concern from approximately 3000 tests performed over 30 years. Summaries of high risk material and article types based on highest Multi-Purpose Crew Vehicle (MPCV) T values are also presented. Historical analysis shows high risk components are produced largely from test materials and articles in the general categories of electronic/powered components, foams, paints/coatings/films, adhesives/tapes, epoxy/resins, liquids/gels, Nomex® with surface treatments, markers/pens/inks, dry film lubricants, thermoplastics, hygiene items (deodorants, lip balms), and silicone rubber. These data are intended to be a resource for spacecraft materials and processes managers, designers, and toxicologists. High risk materials and articles intended for use aboard spacecraft should be tested in accordance with NASA-STD-6001B Test 7.

Vanessa D Buchanan↗

Effect of zinc impurity on silicon solar-cell efficiency

Zinc is a major residue impurity in the preparation of solar-grade silicon material by the zinc vapor reduction of silicon tetrachloride. This paper projects that in order to get a 17-percent AM1 cell efficiency for the Block IV module of the Low-Cost Solar Array Project, the concentration of the zinc recombination centers in the base region of silicon solar cells must be less than 4 x 10 to the 11th Zn/cu cm in the p-base n+/p/p+ cell and 7 x 10 to the 11th Zn/cu cm in the n-base p+/n/n+ cell for a base dopant impurity concentration of 5 x 10 to the 14 atoms/cu cm. If the base dopant impurity concentration is increased by a factor of 10 to 5 x 10 to the 15th atoms/cu cm, then the maximum allowable zinc concentration is increased by a factor of about two for a 17-percent AM1 efficiency. The thermal equilibrium electron and hole recombination and generation rates at the double-acceptor zinc centers are obtained from previous high-field measurements as well as new measurements at zero field described in this paper. These rates are used in the exact dc-circuit model to compute the projections.

Sah, C.-T.↗

Study of the effects of impurities on the properties of silicon materials and performance of silicon solar cell

Zinc is a major residue impurity in the preparation of solar grade silicon material by the zinc vapor reduction of silicon tetrachloride. It was found that in order to get a 17 percent AMl cell efficiency, the concentration of the zinc recombination centers in the base region of silicon solar cells must be less than 4 x 10 to the 11th power Zn/cu cm in the p-base n+/p/p+ cell and 7 x 10 to the 11th power Zn/cu cm in the n-base p+/n/n+ cell for a base dopant impurity concentration of 5 x 10 to the 14th power atoms/cu cm. If the base dopant impurity concentration is increased by a factor of 10 to 5 x 10 to the 15th power atoms/cu cm, then the maximum allowable zinc concentration is increased by a factor of about two for a 17 percent AMl efficiency. The thermal equilibrium electron and hole recombination and generation rates at the double acceptor zinc cancers were obtained from previous high field measurements as well as new measurements at zero field. The rates were used in the exact d.c. circuit model to compute the projections.

Sah, C. T.↗

Enzyme-based CO2 capture for advanced life support

Elevated CO2 levels in air can lead to impaired functioning and even death to humans. Control of CO2 is critical in confined spaces that have little physical or biological buffering capacity (e.g., spacecraft, submarines, or aircraft). A novel enzyme-based contained liquid membrane bioreactor was designed for CO2 capture and certain application cases are reported in this article. The results show that the liquid layer accounts for the major transport resistance. With addition of carbonic anhydrase, the transport resistance decreased by 71%. Volatile organic compounds of the type and concentration expected to be present in either the crew cabin or a plant growth chamber did not influence carbonic anhydrase activity or reactor operation during 1-day operation. Alternative sweep method studies, examined as a means of eliminating consumables, showed that the feed gas could be used successfully in a bypass mode when combined with medium vacuum pressure (-85 kPa) to achieve CO2 separation comparable to that with an inert sweep gas. The reactor exhibited a selectivity for CO2 versus N2 of 1400:1 and CO2 versus O2 is 866:1. The CO2 permeance was 1.44 x 10(-7) mol m-2 Pa-1 s-1 (4.3 x 10(-4) cm3 cm-2 s-1 cmHg-1) at a feed concentration of 0.1% CO2. These data show that the enzyme-based contained liquid membrane is a promising candidate technology that may be suitable for NASA applications to control CO2 in the crew or plant chambers.

NASA Discipline Life Support Systems↗

A sensitive far infrared detection system

An infrared field optics system was designed which achieves the maximum flux concentration allowed by the Abbe sine inequality and provides efficient coupling to bolometer-type detectors.

Hildebrand, R. H.↗

Development of a cw-laser-based cavity-ringdown sensor aboard a spacecraft for trace air constituents

The progress in the development of a sensor for the detection of trace air constituents to monitor spacecraft air quality is reported. A continuous-wave (cw), external-cavity tunable diode laser centered at 1.55 micrometers is used to pump an optical cavity absorption cell in cw-cavity ringdown spectroscopy (cw-CRDS). Preliminary results are presented that demonstrate the sensitivity, selectivity and reproducibility of this method. Detection limits of 2.0 ppm for CO, 2.5 ppm for CO2, 1.8 ppm for H2O, 19.4 ppb for NH3, 7.9 ppb for HCN and 4.0 ppb for C2H2 are calculated.

NASA Discipline Life Sciences Technologies↗

Space radiation dosimetry in low-Earth orbit and beyond

Space radiation dosimetry presents one of the greatest challenges in the discipline of radiation protection. This is a result of both the highly complex nature of the radiation fields encountered in low-Earth orbit (LEO) and interplanetary space and of the constraints imposed by spaceflight on instrument design. This paper reviews the sources and composition of the space radiation environment in LEO as well as beyond the Earth's magnetosphere. A review of much of the dosimetric data that have been gathered over the last four decades of human space flight is presented. The different factors affecting the radiation exposures of astronauts and cosmonauts aboard the International Space Station (ISS) are emphasized. Measurements made aboard the Mir Orbital Station have highlighted the importance of both secondary particle production within the structure of spacecraft and the effect of shielding on both crew dose and dose equivalent. Roughly half the dose on ISS is expected to come from trapped protons and half from galactic cosmic rays (GCRs). The dearth of neutron measurements aboard LEO spacecraft and the difficulty inherent in making such measurements have led to large uncertainties in estimates of the neutron contribution to total dose equivalent. Except for a limited number of measurements made aboard the Apollo lunar missions, no crew dosimetry has been conducted beyond the Earth's magnetosphere. At the present time we are forced to rely on model-based estimates of crew dose and dose equivalent when planning for interplanetary missions, such as a mission to Mars. While space crews in LEO are unlikely to exceed the exposure limits recommended by such groups as the NCRP, dose equivalents of the same order as the recommended limits are likely over the course of a human mission to Mars. c2001 Elsevier Science B.V. All rights reserved.

short duration↗

Once we know all the radiobiology we need to know, how can we use it to predict space radiation risks and achieve fame and fortune?

It has been over 40 years since occupational radiation exposures to NASA's astronauts began and more than 300 individuals have been exposed to low and intermediate doses of trapped protons and galactic cosmic rays (GCR). The International Space Station (ISS) will add substantially to this number and significantly increase average lifetime doses. We review these exposures in this report. After many years of investigation, the method used to assess risk have not changed significantly. However, molecular biology and genetics have made enormous progress in establishing the mechanisms of cancer formation, damage to the central nervous system, and individual variation in sensitivity to radiation. We discuss critical questions and possible new approaches to the prediction of risk from space radiation exposures. Experimental models can lead to testable theories that along with extensive biophysical and informatics approaches, will lead to fame and fortune by allowing for accurate projections of astronaut risks and for the development of biological countermeasures.

NASA Center JSC↗

Incorporating biologically based models into assessments of risk from chemical contaminants

The general approach to assessment of risk from chemical contaminants in drinking water involves three steps: hazard identification, exposure assessment, and dose-response assessment. Traditionally, the risks to humans associated with different levels of a chemical have been derived from the toxic responses observed in animals. It is becoming increasingly clear, however, that further information is needed if risks to humans are to be assessed accurately. Biologically based models help clarify the dose-response relationship and reduce uncertainty.

Review, Tutorial↗

Polymer-carbon black composite sensors in an electronic nose for air-quality monitoring

An electronic nose that uses an array of 32 polymer-carbon black composite sensors has been developed, trained, and tested. By selecting a variety of chemical functionalities in the polymers used to make sensors, it is possible to construct an array capable of identifying and quantifying a broad range of target compounds, such as alcohols and aromatics, and distinguishing isomers and enantiomers (mirror-image isomers). A model of the interaction between target molecules and the polymer-carbon black composite sensors is under development to aid in selecting the array members and to enable identification of compounds with responses not stored in the analysis library.

NASA Discipline Life Sciences Technologies↗

Feasibility of using Low-Cost COTS Sensors for Particulate Monitoring in Space Missions

Real-time measurement of particles suspended in the spacecraft cabin is of great importance to verify that maximum allowable dust concentrations are not exceeded. This is primarily to protect astronaut health, but also has implications for dust-sensitive equipment. Recently, there is growing interest in low-cost commercial off-the-shelf (COTS) particle sensors by air quality researchers for their ability to map concentrations of airborne particulate matter in various terrestrial settings. In addition to low cost (< $2,000), the compact size and minimal weight of these sensors make them a potential choice for space missions. The detection mechanism for these aerosol sensors is typically measurement of light scattered by particles as they flow through a sensing volume. The amount of scattered light for detection depends on the particle size, shape, density, and refractive index of the particle material. Ideally, particle instruments should be calibrated with reference instruments for each different type of aerosol measurement. In this study we review multiple parameters that may impact the performance of state-of-the-art low-cost aerosol sensors. Environmental factors such as temperature, relative humidity, low ambient pressure, radiation and charge environment, partial-gravity and microgravity can affect the accuracy of particle measurements. Characteristics of the dust aerosols including particle size distribution, aerosol composition, refractive index, morphology and concentration levels also affect the measurement accuracy. Finally, we look at these parameters and issues with respect to an example COTS low-cost aerosol sensor. Instrument performance specifications are evaluated, and experiments are performed to measure real-time concentrations of Arizona Road Dust (a terrestrial reference test dust) and lunar dust simulant in a laboratory chamber. Overall, this study provides insight for evaluating spacecraft particulate monitoring technologies and raises questions to be answered before incorporating low-cost COTS sensors in future space missions to dusty destinations.

lunar dust↗

Design and full core fuel performance assessment of high burnup cores for 4-loop PWRs

Increasing the fuel discharge burnup of current light water reactors (LWRs) promises reductions in fuel cycle and/or operations costs. By assuming a constant core power density, the economic gain is enabled by better fuel utilization and/or an increased capacity factor. In this effort to investigate greater than 62 MWd/kgU maximum rod average burnup for 110+ kW/l core power density, two core designs have been developed for a standard 17x17, 193 fuel assemblies pressurized water reactor (PWR). The levelized unit cost methodology is employed to evaluate fuel cycle, operation and maintenance, and capital cost impacts and to examine the economic viability of both core design pathways. Core design and optimization are performed using the commercial STUDSVIK code package. Fuel performance analysis is realized in full core configuration via auditing FRAPCON4.1, FAST1.2, and the high-fidelity code BISON. To provide a realistic assessment, the core design process takes into consideration best practices in current PWR core design. It features acceptable performance in terms of various core design constraints on maximum allowable peaking and boron concentration. Gadolinia (Gd2O3) is used as a burnable poison with a maximum of 9 wt% concentration while feeding 89 or 77 fuel assemblies in a 3-batch refueling scheme. Full core fuel performance simulation, which allows for characterization of relevant fuel temperatures, plenum pressures, stresses, and strains, is performed with respect to two bounding burnup levels. Such performance is potentially licensable for the 18-month high burnup core (<68 MWd/kgU peak pin), while it is more challenging for the 24-month high burnup core design pathway (<75 MWd/kgU peak pin). Maximum rod plenum pressure is identified as the most limiting fuel performance parameter. Here, while the scope of the present study focuses on the steady-state plus overpower conditions, the acceptability of the new discharge burnup has to be further assessed by considering uncertainties and impacts under accident scenarios in the future.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗