Search NASA⌕ Search

SEARCH · Search NASA

Results for “Micro mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Partial recovery of the magnetoelectrical properties of AlGaN/GaN-based micro-Hall sensors irradiated with protons

The effect of annealing on the magnetoelectrical properties of proton-irradiated micro-Hall sensors at an energy of 380 keV and very high proton fluences was studied. Recovery of the electron mobility and a decrease in the sheet resistance of the annealed micro-Hall sensors, as well as an enhancement in their magnetic sensitivity were reported. Trap removal and an improvement in the crystal quality by removing defects were confirmed through current–voltage measurements and Raman spectroscopy, respectively.

36 MATERIALS SCIENCE↗

Role of nanoscale AlN and InN for the microwave characteristics of AlGaN/(Al,In)N/GaN-based HEMT

A new AlGaN/GaN-based high electron mobility transistor (HEMT) is proposed and its micro-wave characteristics are discussed by introducing a nanoscale AlN or InN layer to study the potential improvement in their high frequency performance. The 2DEG transport mechanism including various sub-band calculations for both (Al,In) N-based HEMTs are also discussed in the paper. Apart from direct current characteristics of the proposed HEMT, various microwave parameters such as transconductance, unit current gain (h{sub 21} = 1) cut-off frequency (f{sub t}), high power-gain frequency (f{sub max}). Masons available/stable gain and masons unilateral gain are also discussed for both devices to understand its suitable deployment in microwave frequency range.

36 MATERIALS SCIENCE↗

Understanding the importance of the viscosity contrast between the sample solvent plug and the mobile phase and its potential consequences in two-dimensional high-performance liquid chromatography

The effect of solvent viscosity mismatch on elution performance in reversed-phase HPLC was studied using moment analysis. Two conditions were tested: (1) the mobile phase viscosity was less than the injection plug viscosity, and (2) the mobile phase viscosity was greater than the injection plug viscosity. Under the first condition, retention time and elution performance decreased as the viscosity contrast between the mobile phase and injection plug increased. The effect on performance was more marked as the injection volume increased. A decrease in performance of 12% for compounds with retention factors up to 2.8 was apparent even when the viscosity contrast was only 0.165 cP. In the second set of conditions, elution performance was actually observed to increase, by as much as 25% for a 40 {micro}L injection, as the viscosity contrast between the mobile phase and the solute plug increased. No change in the retention factor was observed. This behaviour was attributed to the shape of an injection plug as it enters into the column, whereby a low viscosity plug permeates away from the wall when the column contains a higher viscosity mobile phase, and vice a versa for a high viscosity plug entering a low viscosity mobile phase. At no stage was either a band splitting or shoulders observed with viscosity contrasts up to 1.283 cP, as could have been expected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal and oxidative degradation studies of formulated C-ethers by gel-permeation chromatography

Gel-permeation chromatography was used to analyze C-ether lubricant formulations from high-temperature bearing tests and from micro-oxidation tests. Three mu-styragel columns (one 500 and two 100 A) and a tetrahydrofuran mobile phase were found to adequately separate the C-ether degradation products. The micro-oxidation tests yielded degradation results qualitatively similar to those observed from the bearing tests. Micro-oxidation tests conducted in air yielded more degradation than did tests in nitrogen. No great differences were observed between the thermal-oxidative stabilities of the two C-ether formulations or between the catalytic degradation activities of silver and M-50 steel. C-ether formulation I did yield more degradation than did formulation II in 111- and 25-hour bearing tests, respectively.

Jones, W. R., Jr.↗

Biochemical Mechanisms and Energy Strategies of Geobacter Sulfurreducens

To provide the scientific understanding required to allow DOE sites to incorporate relevant biological, chemical, and physical processes into decisions concerning environmental remediation, a fundamental understanding of the controls on micro-organism growth in the subsurface is necessary. Specifically, mobility of metals in the environment, including chromium, technetium and uranium, is greatly affected by the process of dissimilatory metal reduction (DMR), which has been shown to be an important biological activity controlling contaminant mobility in the subsurface at many DOE sites. Long-term maintenance of DMR at constant rates must rely upon steady fluxes of electron donors to provide the maintenance energy needed by organisms such as Geobacter sulfurreducens to maintain steady state populations in the subsurface.

09 BIOMASS FUELS↗

Biochemical Mechanisms and Associated Biomolecular Signatures Underlying Energy Strategies of Geobacter Sulfurreducens

To provide the scientific understanding required to allow DOE sites to incorporate relevant biological, chemical, and physical processes into decisions concerning environmental remediation, a fundamental understanding of the controls on micro-organism growth in the subsurface is necessary. Specifically, mobility of metals in the environment, including chromium, technetium and uranium, is greatly affected by the process of dissimilatory metal reduction (DMR). DMR has been shown to be an important biological activity controlling contaminant mobility in the subsurface at many DOE sites. Long-term maintenance of DMR at constant rates must rely upon steady fluxes of electron donors to provide the maintenance energy needed by organisms such as Geobacter sulfurreducens to maintain steady state populations in the subsurface. At present, much effort has been put forth to develop biomolecular signatures which inform on the relevant biological processes at DOE field sites. These signatures are also being developed in defined laboratory conditions to which the field data can be compared to. These signatures include metagenomic, metatranscriptomic and proteomic characterization. While the relevant processes involve reduction of metal contaminants, we suggest that the predominant biochemistry that impacts the biomolecular signature is nutrient availability/limitation. As such, the present proposal aims at characterizing the survival strategy of Geobacter and obtaining biomolecular signatures that would reflect on its energy flux status. In addition, we lack the fundamental knowledge needed to answer fundamental questions such as these: What influxes of electron donors are required to maintain a growing versus a non-growing population of Geobacter? How do changes in nutrient availability or other environmental conditions such as pH and ionic strength affect such required electron-donor influxes? How are these electron-donor influxes controlled by availability and nature of electron acceptors? Under survival conditions, where availability of electron acceptors and nutrients are extremely low, what physiological and genetic modifications occur in Geobacter to enable long-term survival? How do these changes affect the required electron-donor influxes? Is it possible to relate the metabolic activities of Geobacter living under survival mode to the required fluxes of electron donors? What conceptual models can be used to predict maintenance energies of Geobacter under different phases of growth when measured under different environmental conditions? How can these models help the DOE predict the long-term evolution of contaminated sites? We outline a strategy to tackle these questions and lay the framework for DOE to make long-term predictions concerning DMR in the subsurface. We will test the following hypothesis: Geobacter requires different fluxes of substrate for metabolism when existing under growth, stationary, or survival modes, and these substrate fluxes can be related to specific metabolic activities utilized under different geochemical conditions. Our project has two specific objectives: i) Determine the survival characteristics of Geobacter under long-term stationary phase by characterize the physiological response of Geobacter in growth, stationary, and survival phases using genomic sequencing, DNA microarray chips and iTRAQ (proteomics) and relate these responses to the measured substrate fluxes; ii) Determination of growth yield and maintenance energy. While site-specific studies are necessary for site-specific remediation, our work will provide the fundamental knowledge necessary for long-term stewardship of all DOE sites where contaminant mobility is affected by dissimilatory metal reduction.

54 ENVIRONMENTAL SCIENCES↗

InAlN high electron mobility transistor Ti/Al/Ni/Au Ohmic contact optimisation assisted by in-situ high temperature transmission electron microscopy

This paper correlates the micro-structural and electrical characteristics associated with annealing of metallic multi-layers typically used in the formation of Ohmic contacts to InAlN high electron mobility transistors. The multi-layers comprised Ti/Al/Ni/Au and were annealed via rapid thermal processing at temperatures up to 925 °C with electrical current-voltage analysis establishing the onset of Ohmic (linear IV) behaviour at 750–800 °C. In-situ temperature dependent transmission electron microscopy established that metallic diffusion and inter-mixing were initiated near a temperature of 500 °C. Around 800 °C, inter-diffusion of the metal and semiconductor (nitride) was observed, correlating with the onset of Ohmic electrical behaviour. The sheet resistance associated with the InAlN/AlN/GaN interface is highly sensitive to the anneal temperature, with the range depending on the Ti layer thickness. The relationship between contact resistivity and measurement temperature follow that predicted by thermionic field emission for contacts annealed below 850 °C, but deviated above this due to excessive metal-semiconductor inter-diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diamond micro-Raman thermometers for accurate gate temperature measurements

Determining the peak channel temperature in AlGaN/GaN high electron mobility transistors and other devices with high accuracy is an important and challenging issue. A surface-sensitive thermometric technique is demonstrated, utilizing Raman thermography and diamond microparticles to measure the gate temperature. This technique enhances peak channel temperature estimation, especially when it is applied in combination with standard micro-Raman thermography. Its application to other metal-covered areas of devices, such as field plates is demonstrated. Furthermore, this technique can be readily applied to other material/device systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cardiopulmonary Toxicity Induced by Ambient Particulate Matter (BI City Concentrated Ambient Particle Study)

Alterations in heart rate variability (HRV) have been reported in rodents exposed to concentrated ambient particles (CAPs) from different regions of the United States. The goal of this study was to compare alterations in cardiac function induced by CAPs in two distinct regional atmospheres. AirCARE 1, a mobile laboratory with an EPA/Harvard fine particle (particulate matter <2.5 {micro}m; PM{sub 2.5}) concentrator was located in urban Detroit, MI, where the PM mixture is heavily influenced by motor vehicles, and in Steubenville, OH, where PM is derived primarily from long-range transport and transformation of power plant emissions, as well as from local industrial operations. Each city was studied during both winter and summer months, for a total of four sampling periods. Spontaneously hypertensive rats instrumented for electrocardiogram (ECG) telemetry were exposed to CAPs 8 h/day for 13 consecutive days during each sampling period. Heart rate (HR), and indices of HRV (standard deviation of the average normal-to-normal intervals [SDNN]; square root of the mean squared difference of successive normal-to-normal intervals [rMSSD]), were calculated for 30-minute intervals during exposures. A large suite of PM components, including nitrate, sulfate, elemental and organic carbon, and trace elements, were monitored in CAPs and ambient air. In addition, a unique sampler, the Semi-Continuous Elements in Air Sampler (SEAS) was employed to obtain every-30-minute measurements of trace elements. Positive matrix factorization (PMF) methods were applied to estimate source contributions to PM{sub 2.5}. Mixed modeling techniques were employed to determine associations between pollutants/CAPs components and HR and HRV metrics. Mean CAPs concentrations in Detroit were 518 and 357 {micro}g/m{sup 3} (summer and winter, respectively) and 487 and 252 {micro}g/m{sup 3} in Steubenville. In Detroit, significant reductions in SDNN were observed in the summer in association with cement/lime, iron/steel, and gasoline/diesel factors, while associations with the sludge incineration factor and components were less consistent. In winter, increases in HR were associated with a refinery factor and its components. CAPs-associated HR decreases in winter were linked to sludge incineration, cement/lime, and coal/secondary factors and the majority of their associated components. Specific relationships for increased rMSSD in winter were difficult to determine due to lack of consistency between factors and associated constituents. In Steubenville, we observed significant changes in HR (both increases and decreases), SDNN, and rMSSD in the summer, but not in the winter. We examined associations between individual source factors/PM components and HRV metrics segregated by predominant wind direction (NE or SW). Changes in HR (both increases and decreases) were linked with metal processing, waste incineration, and iron/steel factors along with most of their associated elemental constituents. Reductions in SDNN were associated with metal processing, waste incineration, and mobile source factors and the majority of elements loading onto these factors. There were no consistent associations between changes in rMSSD and source factors/components. Despite the large number of coal-fired power plants in the region, and therefore the large contribution of secondary sulfate to overall PM mass, we did not observe any associations with the coal/secondary factor or with the majority of its associated components. There were several inconsistencies in our results which make definitive conclusions difficult. For example, we observed opposing signs of effect estimates with some components depending on season, and with others depending on wind direction. In addition, our extensive dataset clearly would be subject to issues of multiple comparisons, and the 'true' significant results are unknown. Overall, however, our results suggest that acute changes in cardiac function were most strongly associated with local industrial sources. Results for coal-fired power plant-derived PM were inconsistent and largely nonsignificant, whereas traffic and metal-related industries appeared to have stronger impacts. Importantly, our findings highlight the value of combining both factor analytical and component-specific analyses when interpreting results; relying on only one approach may not provide a complete picture of exposure-health relationships.

54 ENVIRONMENTAL SCIENCES↗

Sustainable Public Transport: Providing Responsive, On-Demand Service with Clean Energy

The National Renewable Energy Laboratory (NREL) uses the Mobility Energy Productivity (MEP) as a metric and a lens to guide applied research into high performance public mobility. In the current initiative to abate global warming, the US needs not only zero-emission vehicles in the transit fleet (such as buses and shuttles) but also time- and cost-effective services to connect people with goods, services and employment toward a high-quality of life. Our current transportation system is overly dependent on personally-owned automobiles for high quality mobility, with public modes being less viable in many areas. Simply electrifying the drivetrains of existing public transit modes will fail to improve the quality of mobility for those that do not have access to private automobiles. The slow rebound by transit from the pandemic reveals the need to reinvent public transit service. Using the MEP lens, NREL researchers have tracked various novel developments in the public mobility space, with the confluence of shared, on-demand transit (ODT) services using light duty vehicles emerging as a key enabler of high-efficiency public mobility. Deployments such as those in Arlington, TX, Dallas, TX, Fort Erie, ON, and Innisfil, ON showcase the use of fleets of light-duty vehicles as the basis for community circulation and first/last mile to intra-regional transit. ODT services have demonstrated improvements in being more time efficient for riders, more energy efficient in operation (even before the introduction of fully electric vehicles), as well as being cost effective. It appears that aspects of the long-awaited promise of Personal Rapid Transit from the 1970s are beginning to be realized through ODT deployments, leveraging transportation network company (TNC) logistics, popularized by Uber and Lyft, but applied to public mobility. Currently, manually driven ODT operations are already cost competitive with traditional transit systems on a cost per ride basis, and full automation promises to reduce costs by 50% while providing additional safety and verified customer service. Connecting these ODT systems with efficient and effective intra-regional backbone transit service is the next step, with transit agencies like DART providing early results. This discussion will walk through the evidence for this postulated outcome and show results from a series of case-studies.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

Separation of Single-Walled Carbon Nanotubes with DEP-FFF

A process using a modified dielectrophoresis device separates single-walled carbon nanotubes (SWNTs) according to their polarizability in electric fields. This depends on the size and dielectric constant of individual nanotubes and easily separates metallic from semiconducting nanotubes. Separation by length has also been demonstrated. Partial separation (enrichment) according to bandgap (which is linked to polarizability) has also been shown and can be improved to full separation of individual types of semiconducting SWNTs with better control over operational parameters and the length of SWNT starting material. This process and device can be scaled affordably to generate useful amounts of semiconducting SWNTs for electronic device development and production. In this study, a flow injection dielectrophoresis technique was used with a modified dielectrophoresis device. The length, width, and height of the modified chamber were 28, 2.5, and 0.025 cm, respectively. On the bottom of the chamber, there are two arrays of 50-m-wide, 2-m-thick gold electrodes, which are connected to an AC voltage generator and are alternately arranged so that every electrode is adjacent to two electrodes of the opposite polar. There is an additional plate electrode on the top of the chamber that is negatively biased. During the experiment, a syringe pump constantly pumps in the mobile phase, 1-percent sodium dodecylbenzene sulfonate (SDBS) solution, into the chamber. The frequency and voltage are set to 1 MHz and 10 V peak-to-peak, respectively. About 150 micro-L of SWNTs in 1- percent SDBS decanted solution are injected to the mobile phase through a septum near the entrance of the chamber. The flow rate of the mobile phase is set to 0.02 cu cm/min. The injected SWNTs sample flows through the chamber before it is lead into a fluorescence flow-through cell and collected for further analysis. The flow-through cell has three windows, thus allowing the fluorometer to collect fluorescence spectrum and visible absorption spectrums simultaneously. Dielectrophoresis field-flow fractionation (DEP-FFF) generally depends on interaction of a sedimentation force and DEP force for particle separation, and SWNTs are neutrally buoyant in water. In this innovation, the third electrode was added to create a sedimentation force based on DC electrophoresis. This makes this particular device applicable to separations on any neutrally buoyant particles in solution and a more general process for a broad range of nanomaterials sorting and separations.

Schmidt, Howard K.↗

Cities Topology - Curbs and Parking

Personal vehicles, buses, freight, emerging services (e.g., ride-hailing), and other modes impose several combinations of competing demands for curb space. Therefore, research is needed to better understand impacts and prioritize space allocation - parking, pick-up/drops or PUDOs, commercial zones, bus stops, etc. - to optimize mobility and energy use. This study aims to develop an optimization model to allocate and manage curb space by interviewing experts, analyzing responses to understand curb space key requirements and priorities, link such curb-management practices to mobility and energy productivity, and provide methods suitable for micro-scale analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Quantitative Analysis of Micro-structural Changes in a Bituminous Coal After Exposure to Supercritical CO{sub 2} and Water

High-volatile bituminous coal samples were reacted in deionized water with supercritical CO{sub 2} (ScCO{sub 2}–water) under simulated in situ pressure and temperature conditions (8 MPa and 40 °C) in unconfined stress state for 14 days, in order to characterize potential CO{sub 2}–water–coal reactions. Micro-structural changes were identified pre- and post-experiment using X-ray powder diffraction (XRD) analysis for powdered coal (mineralogical changes), optical microscopy and scanning electron microscopy (SEM) for polished thin sections (surface feature changes) and micro-CT scanning for a small core (porosity and permeability changes). XRD analysis revealed that carbonic acid leaches out mineral matters in coal, including carbonates (calcite) and silicate minerals (albite, illite and kaolinite). Optical microscopy, SEM and CT images confirmed that the interaction of coal with ScCO{sub 2}–water causes an abundance of micro-cracks to open or propagate in unconfined coal samples. Most micro-cracks preferably propagated along maceral–mineral and maceral–maceral interfaces, which demonstrates that the micro-cracking was caused by differential swelling of different coal lithotypes. Wormhole formation was observed in coal caused by mineral dissolution and hydrocarbon mobilization, which significantly increases coal porosity compared with swelling-induced cracking. 3-D pore network models extracted from CT images show that ScCO{sub 2}–water treatment enlarges the pore and throat size, increases the numbers of pores and throats and improves pore network connectivity. Overall, CO{sub 2}–water–coal interactions under unconfined conditions enhance coal porosity, connectivity and permeability, which can be attributed to the combined effect of micro-cracking, mineral dissolution and hydrocarbon mobilization.

58 GEOSCIENCES↗

Scalable and Direct Growth of Graphene Micro Ribbons on Dielectric Substrates

Here we report on a scalable and direct growth of graphene micro ribbons on SiO2 dielectric substrates using a low temperature chemical vapor deposition. Due to the fast annealing at low temperature and dewetting of Ni, continuous few-layer graphene micro ribbons grow directly on bare dielectric substrates through Ni assisted catalytic decomposition of hydrocarbon precursors. These high quality graphene micro ribbons exhibit low sheet resistance of ,700 V 22100 V, high on/off current ratio of ,3, and high carrier mobility of ,655 cm2 V21 s21 at room temperature, all of which have shown significant improvement over other lithography patterned CVD graphene micro ribbons. This direct approach can in principle form graphene ribbons of any arbitrary sizes and geometries. It allows for a feasible methodology towards better integration with semiconductor materials for interconnect electronics and scalable production for graphene based electronic and optoelectronic applications where the electrical gating is the key enabling factor.

SYNTHESIS OF GRAPHENE↗

SMPS data from TAMU TRACER campaign in the Houston TX region from July to September 2022

During TRACER, the Texas A&M Rapid Onsite Atmospheric Measurements Van (ROAM-V) was deployed to capture airmasses behind (maritime) and ahead (continental) of the passage of the sea-breeze front through Houston. On select sampling days, ROAM-V sampled in the morning/mid-day on the coast and then transited to a second inland site for the afternoon/evening. The suite of instruments deployed on ROAM-V included a Condensation Particle Counter (CPC; GRIMM Model 5.403 CPC), Scanning Mobility Particle Sizer (SMPS; TSI 3750 detector, TSI 3082 classifier, TSI 3088 neutralizer, TSI 3081A Differential Mobility Analyzer), Cloud Condensation Nuclei counter (Droplet Measurement Technologies CCN Counter), micro pulse lidar (Droplet Measurement Technologies Micro Pulse LiDAR (miniMPL)), and a Davis Rotating Uniform size-cut Monitor (DRUM; DRUMAir 4-DRUM). Before sampling at each location, the latitude and longitude were recorded using the GPS on the phone application “My Altitude”. Onboard the ROAM-V, aerosol samples are drawn through a shared isokinetic inlet at a flow rate ranging from 3.5 to 7.0 LPM. A portion of this flow, 1.0 LPM, is directed through TSI's 0.071 cm impactor attached to the classifier of the SMPS setup. The SMPS’s DMA and CPC are connected through a 20.3 cm length of 0.48 cm diameter tubing. Measured SMPS size distributions were used to calculate size-dependent particle losses for each SMPS scan. Particle losses from diffusion (based on Kesten, 1991 and Gormley, 1949) and inertial impaction in 90-degree bends (based on Aerosol Measurement, 2011 and Crane, 1977) were included in the loss calculation. This data was collected for ARM Field Campaign AFC07055 and supported by DOE ASR grant DE-SC0021047. For any further questions, please feel free to contact the instrument PI, Sarah D. Brooks, sbrooks@tamu.edu. Kesten et. al. Calibration of a TSI Model 3025 Ultrafine Condensation Particle Counter. Aerosol Science and Technology, 15:2, 107-111, 1991. Gormley et. al. Diffusion from a Stream Flowing through a Cylindrical Tube. Proceedings of the Royal Irish Academy, Vol 52, 163-169, 1948. Aerosol Measurement: Principles, Techniques, and Applications, Third Edition. John Wiley & Sons, Inc, 2011. Crane et. al. Inertial Deposition of Particles in a Bent Pipe. Journal of Aerosol Science, Vol 8, 161-170, 1977.

54 ENVIRONMENTAL SCIENCES↗

Microbial acceleration of aerobic pyrite oxidation at circumneutral pH

Abstract Pyrite (FeS 2 ) is the most abundant sulfide mineral on Earth and represents a significant reservoir of reduced iron and sulfur both today and in the geologic past. In modern environments, oxidative transformations of pyrite and other metal sulfides play a key role in terrestrial element partitioning with broad impacts to contaminant mobility and the formation of acid mine drainage systems. Although the role of aerobic micro‐organisms in pyrite oxidation under acidic‐ pH conditions is well known, to date there is very little known about the capacity for aerobic micro‐organisms to oxidize pyrite at circumneutral pH . Here, we describe two enrichment cultures, obtained from pyrite‐bearing subsurface sediments, that were capable of sustained cell growth linked to pyrite oxidation and sulfate generation at neutral pH . The cultures were dominated by two Rhizobiales species ( Bradyrhizobium sp. and Mesorhizobium sp.) and a Ralstonia species. Shotgun metagenomic sequencing and genome reconstruction indicated the presence of Fe and S oxidation pathways in these organisms, and the presence of a complete Calvin–Benson–Bassham CO 2 fixation system in the Bradyrhizobium sp. Oxidation of pyrite resulted in thin (30–50 nm) coatings of amorphous Fe( III ) oxide on the pyrite surface, with no other secondary Fe or S phases detected by electron microscopy or X‐ray absorption spectroscopy. Rates of microbial pyrite oxidation were approximately one order of magnitude higher than abiotic rates. These results demonstrate the ability of aerobic microbial activity to accelerate pyrite oxidation and expand the potential contribution of micro‐organisms to continental sulfide mineral weathering around the time of the Great Oxidation Event to include neutral‐ pH environments. In addition, our findings have direct implications for the geochemistry of modern sedimentary environments, including stimulation of the early stages of acid mine drainage formation and mobilization of pyrite‐associated metals.

Percak‐Dennett, E.↗

Single-parameter characterization of discrete-dislocation pileup tipfield and its application to physically based micro-mechanics

The equivalence between continuous dislocation pileups and cracks is reviewed. The force on the leading dislocation is defined and a general method of calculation of the force is proposed. The equivalence relations are given. Based on the analysis by Eshelby, Frank, and Nabarro and the numerical calculations by Chou and Li and Armstrong et al, it will be shown that the force, F, on the locked leading dislocation of a discrete pileup is capable of characterizing uniquely the stress, strain, and displacement fields at the tip of the pileup, including the positions of the discrete mobile dislocations behind the leading dislocation. Conversely, the positions of the mobile dislocations can be used to measure F. If the propagation of micro-slips and the initiation of micro-fractures at the tip of a pileup are controlled by resolved shear stress and normal cleavage stress respectively, the resolved shear stress intensity coefficient, ReSIC, and the resolved cleavage stress intensity coefficient, ReCIC, must be constant.

Liu, H. W.↗

Percolative superconductivity in La{sub 2}CuO{sub 4.06} by lattice granularity patterns with scanning micro x-ray absorption near edge structure

The simplest cuprate superconductor La{sub 2}CuO{sub 4+y} with mobile oxygen interstitials exhibits a clear phase separation. It is known that oxygen interstitials enter into the rocksalt La{sub 2}O{sub 2+y} spacer layers forming oxygen interstitials rich puddles and poor puddles but only recently a bulk multiscale structural phase separation has been observed by using scanning micro X-ray diffraction. Here we get further information on their spatial distribution, using scanning La L{sub 3}-edge micro X-ray absorption near edge structure. Percolating networks of oxygen rich puddles are observed in different micrometer size portions of the crystals. Moreover, the complex surface resistivity shows two jumps associated to the onset of intra-puddle and inter-puddles percolative superconductivity. The similarity of oxygen doped La{sub 2}CuO{sub 4+y}, with the well established phase separation in iron selenide superconductors is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗