Coupled Microstructural Analysis and Simulated Mechanical Testing of Ablative Materials with Empirical Validation
This is my paper for the 2025 AIAA SciTech conference. The submission is due 12/09.
Bernstein, Samantha Rose [Sandia National Laborato↗
SEARCH · Search NASA
Results for “Microstructure simulation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental verification of a crystal plasticity-based simulation framework for predicting microstructure and geometric shape changes: Application to bending and Taylor impact testing of Zr
This paper is concerned with experimental verification of a recently developed multi-scale simulation framework for plastic deformation of metallic materials from quasi-static to impact deformation conditions. The framework is a visco-plastic self-consistent (VPSC) polycrystalline model embedded in an implicit finite element method (FE-VPSC) to provide a microstructure-sensitive constitutive response at each material point. Each material point of the FEM model is a polycrystalline aggregate with crystallographic deformation mechanisms operating at the single crystal scale with their evolving activity based on a dislocation density-based hardening law and texture. Four beams and three cylinders machined in different orientations from a textured plate of high-purity zirconium are tested quasi-statically in 4-point bending and at speeds of 100 m/s, 170 m/s and 243 m/s during Taylor impact tests, respectively. The variation in dimensional changes resulting from different sample orientations in the plate with respect to loading directions is measured for each sample. Moreover, texture and twinning characterization is performed using electron backscattered diffraction (EBSD). The deformation processes and underlying evolution of microstructure are successfully simulated using the FE-VPSC framework. In doing so, the model parameters are optimized and validated across a broad range of strain rates and temperatures. Simulation results in terms of geometrical changes and microstructural evolution are compared with the experimental measurements. The model predicts anisotropic material flow resulting from the hard-to-deform crystallographic directions, the development of gradients in texture and twinning through the geometries, tension–compression asymmetry, as well as the extent of plasticity under impact.
42 ENGINEERING↗
Multiscale simulation of spatially correlated microstructure via a latent space representation
When deformation gradients act on the scale of the microstructure of a part due to geometry and loading, spatial correlations and finite-size effects in simulation cells cannot be neglected. We propose a multiscale method that accounts for these effects using a variational autoencoder to encode the structure–property map of the stochastic volume elements making up the statistical description of the part. In this paradigm the autoencoder can be used to directly encode the microstructure or, alternatively, its latent space can be sampled to provide likely realizations. Furthermore, we demonstrate the method on three examples using the common additively manufactured material AlSi10Mg in: (a) a comparison with direct numerical simulation of the part microstructure, (b) a push forward of microstructural uncertainty to performance quantities of interest, and (c) a simulation of functional gradation of a part with stochastic microstructure.
Elastoplasticity↗
PyCMG-based Simulation of Volumetric Concrete Microstructure
Concrete is a complex, heterogeneous material with a microstructure composed of aggregates, cement paste, and pores spanning multiple length scales. Understanding this microstructure is critical for advancing the performance, durability, and modeling of concrete-based systems. While experimental imaging such as X-ray computed tomography (XCT) provides valuable insights, generating large datasets with detailed ground truth annotations is both costly and labor-intensive due to challenges in segmenting similar phases, such as aggregates and cement paste, that often share similar attenuation properties. To address this, we developed a pipeline to simulate realistic 3D concrete microstructures using the open-source Python package PyCMG. This simulation effort focuses on generating high-fidelity, annotated microstructures that can serve as training or benchmarking datasets for image analysis, segmentation algorithms, and machine learning models, particularly in scenarios where experimental data is scarce.
Ziabari, Amir [Oak Ridge National Laboratory; ORNL↗
GeoMicro3D: A novel numerical model for simulating the reaction process and microstructure formation of alkali-activated slag
Highlights: • The GeoMicro3D model was innovatively developed for simulating the reaction process and microstructure formation of AAS. • In GeoMicro3D, the dissolution of slag and reactions of aqueous ions are fundamentally described in the local lattice cell. • A novel approach is proposed to speed up the nucleation simulations. • GeoMicro3D was implemented and verified with the relevant experimental data and thermodynamic calculation results. For the first time, this study developed a novel model, named GeoMicro3D, to simulate the reaction process and microstructure formation of alkali-activated slag. The GeoMicro3D model consists of four modules that are designed to simulate, respectively: (i) the initial spatial distribution of real-shape slag particles in alkaline activator, (ii) the dissolution of slag and diffusion of ions via the transition state theory and lattice Boltzmann method, respectively, (iii) the spatial distribution of reaction products using a nucleation probability theory, and (iv) the chemical reactions with thermodynamic modelling. Afterwards the GeoMicro3D model was implemented and verified. The simulation results were discussed and compared with the relevant experimental data and thermodynamic calculation results using GEMS. A good agreement was found in the comparisons, showing the strong simulation capability of GeoMicro3D.
36 MATERIALS SCIENCE↗
Computing diffraction patterns of microstructures from phase-field simulations
The diffraction pattern of a material contains information not only on the crystal structures of its constituting phases, but also on its mesoscale spatial distributions of phases, grains, and ferroelastic, ferroelectric, and ferromagnetic domains. While diffraction patterns from experiments such as X-ray diffraction are presented in the reciprocal or Fourier space, mesoscale microstructure models such as the phase-field method naturally produce real-space images of spatial distribution of chemical composition, structural, and ferroic domains. Although one could rather readily compute the Fourier amplitudes of chemical and structural domain distributions generated by mesoscale simulations, they only contain information about the length scale and alignment of the real-space chemical and structure domains. Therefore, a direct comparison between diffraction experiments and mesoscale microstructure simulations is not possible. Here, we develop a theoretical approach to directly compute the crystal diffraction patterns of microstructures predicted by phase-field simulations. In particular, we consider five representative examples of microstructure patterns involving purely compositional domains, a single pair of tetragonal twin structures, multiple twin variants in a hexagonal system, ferroelectric polar vortices, and polycrystalline grains. The results are compared with previous experimental observations as well as X-ray diffraction experiments performed in the present study. Furthermore, the theoretical framework allows one to directly connect material microstructures and diffraction patterns predicted from phase-field simulations and the corresponding diffraction patterns from experiments, and thus providing guidance to experimental diffraction characterization and interpretation of microstructures.
36 MATERIALS SCIENCE↗
An Implicit Approach to Phase Field Modeling of Solidification for Additively Manufactured Alloys [Slides]
We are leveraging modern algorithms and computational science to provide a route to predictive simulation of microstructure evolution on emerging exascale architectures. We are utilizing the fastest supercomputers in the world for modeling and simulation of microstructure evolution for generation of data under AM conditions. Solidification conditions in AM can be tailored for the reliable design of materials to specific performance requirements. Developing computational tools to further characterize alloys and correlate the processing-structure-properties-performance (PSPP) relationship.
36 MATERIALS SCIENCE↗
Microstructure modeling of nuclear structural materials: Recent progress and future directions
Modeling and simulation of microstructures are essential to understand the complex responses and behaviors of nuclear materials in extreme environments. The needs to assess the extended life operation as well as the growing interest in accelerating nuclear materials development and qualification have stimulated the use of high-fidelity multiscale models aided by empirical and ab initio data. This paper reviews the role of various models across different length and time scales in investigating irradiation effects on microstructure evolution and degradation, in particular the embrittlement caused by radiation induced or enhanced formation of nanoscale chemical heterogeneities. The strength and limitations of these models, including classical rate theories, cluster dynamics, phase-field methods, and atomistic models informed by ab initio energies, are discussed with seminal examples. Challenges regarding the lack of thermo-kinetic data and theoretical treatments considering chemical complexities and magnetic excitations, as well as the stabilizing effect by excess point defects in nuclear structural materials are presented, along with potential solutions based on ab initio informed surrogate energy models and statistical sampling by Monte Carlo simulations. Further, the review then highlights the opportunities to leverage the advantages of different methods by establishing hybrid models by shared variables or coupled codes and applications. Finally, the review concludes with forward-looking remarks on how the use of physics-based models can aid the improvement of machine-learning models of property degradation and vice versa.
36 MATERIALS SCIENCE↗
DECA: Discrete Event inspired Cellular Automata for grain structure prediction in additive manufacturing
Microstructure largely dictates macroscopic material properties and is strongly affected by processing. Therefore, the simulation of microstructure evolution in response to thermal fields during processing is of significant interest within the computational materials science community. Additive manufacturing (AM) has emerged as a technique for producing complex geometries and unique microstructures. Yet, complex and rapid thermal cycles in AM pose computational challenges for existing microstructure models. This work proposes a discrete event inspired cellular automata (CA) approach, titled DECA, to accelerate simulation of grain structure evolution in AM. In contrast to conventional time-stepped CA models, this model directly solves the times capture events would take place allowing for stepping in events rather than time (a technique also found in the field of discrete-event simulation). In comparison to purely serial discrete-event models, DECA allows for temporary violation of the causality constraint, but detects and corrects these violations, leading to an emergent phenomenon dubbed causality rippling, in which previously calculated capture events are overwritten. The amount of repeated calculations, defined by the capture ratio, is taken as a measure of computational inefficiency, and the model parameters that affect this ratio are evaluated. The new DECA approach was found to be more computationally efficient than conventional time-stepped CA models while guaranteeing an accurate solution, which can only be achieved in the conventional models for vanishingly small time steps. Finally, opportunities for parallelization and scaling of the new approach are discussed.
36 MATERIALS SCIENCE↗
Modeling deformation and failure in AlSi-polyester abradable sealcoating material using microstructure-based finite element simulation
A plasma-sprayed aluminum-silicon (AlSi)/polyester coating is applied in modern gas turbine engines as an abradable sealcoating to maintain tight clearances between the rotating blades and the static casing. While running the engine, the rotating blades “rub” with the abradable coating, which results in extreme strain rate (up to 10 6 ) dynamics and a high-temperature environment. Due to the difficulty of collecting direct measurements, predictive computational models are important for analyzing the deformation and failure of the abradable material, to help meet the design target of avoiding damage to the blade tip and maintaining high fuel efficiency. In this research, a microstructure-based finite element (FE) computational model was developed to capture the complex mechanical behavior of the AlSi/polyester microstructure. The model is based on a virtual representative-volume-element (RVE) of a metal-polymer microstructure, reconstructed from x-ray computed tomography. It models the plastic deformation of, and damage to, each AlSi and polyester constituents, as well as the failure at their interface. The model was calibrated and validated with uniaxial tension and compression experiments, conducted at two temperatures (298 K and 533 K) at an applied strain rate of 10 3 - 10 4 s -1 . The material exhibited strongly asymmetric tension-compression behavior and a sensitivity to temperature, which was well captured by the model. The model was further applied to investigate changes in mechanical behavior due to variations in constituents’ volume fractions, which provides guidance to the microstructural design of AlSi/polyester abradable materials. The model is expected to facilitate the development of improved abradable materials by bypassing the conventional trial-and-error approach and extensive testing requirements.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Initializing intragranular residual stresses within statistically equivalent microstructures for crystal plasticity simulations
Not Available
Bandyopadhyay, Ritwik↗
Comparative Corrosion Behavior of Five Different Microstructures of Rebar Steels in Simulated Concrete Pore Solution with and Without Chloride Addition
The present work discusses the effect of five different microstructures, coarse, fine and very fine ferrite–pearlite, martensite and tempered martensite, made by furnace cooling, air cooling, forced air-cooling, water quenching and tempering, respectively, of a rebar steel on its corrosion performance in freely aerated with and without chloride-contaminated simulated concrete pore solution using the dynamic polarization and electrochemical impedance spectroscopy. The corrosion performance of the steels with five different microstructures relates to the polarization resistance, protective ability of rusts and the extent of the galvanic attack. The corrosion rate of the steels has been found to be comparable in the simulated concrete pore (SCP) solution. However, in chloride-containing SCP solution, corrosion rate has been found to increase in the following sequence: forced air-cooled–air-cooled–quenched–furnace-cooled–tempered steels.
36 MATERIALS SCIENCE↗
Metal additive manufacturing simulation across length, time, and computing scales
Metal additive manufacturing (AM) offers a unique opportunity for production of advanced materials and complex geometries. However, variability in microstructure and properties challenges conventional approaches to design, process optimization, qualification, and materials selection. Modeling and simulation can improve understanding of AM processing and materials, but also poses major challenges for existing computational methods. Simultaneously, modern scientific computing hardware has become increasingly complex, most notably with the adoption of hybrid architectures such as Graphical Processing Units (GPUs). If appropriately utilized, emerging computational capabilities provide an opportunity to reveal new insight into AM processing and the resulting material structure and properties. In this review we describe the computational AM landscape, identify critical gaps, and highlight opportunities to impact the development and application of AM. First, the requirements and challenges of representative AM problem statements will be defined. Here, these problems range from scientific studies to industrial applications and are designed to capture the breadth of challenges facing the AM community. Next, the current state of AM modeling and simulation is evaluated, broken down by enabling hardware and software, process simulation, microstructure simulation, and property simulation. Each section describes the diversity of simulation approaches and associated trade-offs in physical fidelity and computational expense. Each area is then assessed based on their suitability and readiness for current and developing computational architectures. Lastly, the greatest opportunities for future research and application are highlighted, including gaps in modeling capabilities, opportunities for near-term application, and key scientific challenges.
additive manufacturing↗
Rethinking materials simulations: Blending direct numerical simulations with neural operators
Abstract Materials simulations based on direct numerical solvers are accurate but computationally expensive for predicting materials evolution across length- and time-scales, due to the complexity of the underlying evolution equations, the nature of multiscale spatiotemporal interactions, and the need to reach long-time integration. We develop a method that blends direct numerical solvers with neural operators to accelerate such simulations. This methodology is based on the integration of a community numerical solver with a U-Net neural operator, enhanced by a temporal-conditioning mechanism to enable accurate extrapolation and efficient time-to-solution predictions of the dynamics. We demonstrate the effectiveness of this hybrid framework on simulations of microstructure evolution via the phase-field method. Such simulations exhibit high spatial gradients and the co-evolution of different material phases with simultaneous slow and fast materials dynamics. We establish accurate extrapolation of the coupled solver with large speed-up compared to DNS depending on the hybrid strategy utilized. This methodology is generalizable to a broad range of materials simulations, from solid mechanics to fluid dynamics, geophysics, climate, and more.
36 MATERIALS SCIENCE↗
Multiscale Modeling of Microstructural Evolution in Fused-Coating Additive Manufacturing
A quantitative phase field model with adaptive-computational-domain-expansion (ACDE) method was developed to simulate the microstructural evolution in fused-coating additive manufacturing process. A heat transfer and fluid flow model was established to investigate the solidification behavior of the molten pool in a single deposited layer. The solidification parameters such as temperature gradient and solidification rate were calculated from the macroscopic model and then fed into the phase field model to get the microstructure at different positions within a single deposited layer. Columnar dendrites were formed at the bottom of the deposited layer, and equiaxed dendrites appeared in the upper part of the layer. The ACDE method is used to improve the simulation efficiency. The metallographic experiments and energy-dispersive spectrometer analysis for composition were conducted on the fused-coating specimen, and the results were in good accordance with the simulations.
36 MATERIALS SCIENCE↗
Lower length scale informed improvements to Bison U-Pu-Zr fuel swelling model
Due to renewed interest in metallic fuels from the U-(Pu)-Zr material system, significant improvements have recently been made to BISON's capability to simulate metallic fuel, particularly in the area of swelling. In this report, lower length scale simulations that have been conducted to inform the engineering-scale models in BISON during FY20 are described. For the high-temperature regions of the fuel that are dominated by the $\gamma$ phase of U-(Pu)-Zr, two new models for swelling have implemented in BISON. Phase-field simulations were conducted to calculate parameters for these and other BISON models that control when gaseous swelling ceases and fission gas release begins. For the low-temperature regions of the fuel dominated by the phase of uranium, microstructurally resolved simulations of pore growth and crystal deformation were performed to understand the effect of irradiation-generated crystal shape changes. Conformally meshed microstructures with pores were simulated with a crystal plasticity model and with a burnup eigenstrain model. Plastic deformation will not cause pore size to increase; burnup eigenstrain (irradiation-induced crystal shape changes) will increase the volume of existing porosity and cause it to become anisotropic in shape. Additional model development work for early-stage fission gas cluster/bubble formation in the $\gamma$ phase were performed, by coupling with defect clustering within cluster dynamics framework. Sensitivity analysis were conducted to identify the critical thermo-kinetic parameters needed for rigorous assessment.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗