Results for “Multirotor” — Page 4

NASA NTRS2021

Parametric Study of State-of-Charge for an Electric Aircraft in Urban Air Mobility

The envisioned concept of urban air mobility is anticipated to support passenger transportation, cargo delivery, and emergency services in major metropolitan areas with increasing autonomy levels in the future. Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. However, the low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, to enable autonomous urban air mobility operations using electric aircraft, one of the critical steps from a safety and efficiency perspective is to understand how various operational and environmental conditions impact the state-of-charge of the onboard lithium-ion polymer batteries. This research performs a parametric study of the state-of-charge for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The parameters considered for the parametric analysis are cruise airspeed, cruise altitude, climb and descent profiles, wind conditions (wind magnitude, wind direction relative to the route, and wind magnitude uncertainty), and required time of arrival.

Urban Air Mobility↗

NASA NTRS2021

Parametric Study of State of Charge for an Electric Aircraft in Urban Air Mobility

The envisioned concept of urban air mobility is anticipated to support passenger transportation, cargo delivery, and emergency services in major metropolitan areas with increasing autonomy levels in the future. Distributed electric propulsion powered electric vertical takeoff and landing aircraft are expected to enable urban air mobility. However, the low specific energy of onboard lithium-ion polymer batteries and wind conditions impose constraints on flight endurance. Therefore, to enable autonomous urban air mobility operations using electric aircraft, one of the critical steps from a safety and efficiency perspective is to understand how various operational and environmental conditions impact the state-of-charge of the onboard lithium-ion polymer batteries. This research performs a parametric study of the state-of-charge for a NASA-proposed conceptual multirotor aircraft flight in the urban environment. The parameters considered for the parametric analysis are cruise airspeed, cruise altitude, climb and descent profiles, wind conditions (wind magnitude, wind direction relative to the route, and wind magnitude uncertainty), and required time of arrival.

Urban Air Mobility↗

NASA NTRSDate not supplied

Aircraft Classification Using Radar from Small Unmanned Aerial Systems for Scalable Traffic Management Emergency Response Operations

This work investigates two machine learning techniques: Support Vector Machine (SVM) and Autoencoders (AE)with SVM layer for classification of radar trajectories as General Aviation (GA), fixed-wing small Unmanned Aerial System (sUAS), or not-an-aircraft using radar data recorded from sUAS. Onboard identification of intruder aircraft type is useful for planning avoidance maneuvers and is necessary to provide autonomous systems to meet or exceed the avoidance capability of a human pilot. Aircraft classification can identify intruder aircraft that are not part of the team and may be violating a Temporary Flight Restriction. Aircraft classification is needed in monitoring an airspace where multiple aircraft are teaming on a shared task. Scalable Traffic Management for Emergency Response Operations (STEReO) is a NASA project aimed at improving disaster response by enabling large scale aircraft operations through the teaming of manned aircraft with sUAS to maximize emergency response resources. To this end, this work uses trajectories and radar derived features to classify aircraft from a multirotor sUAS. The AE + SVM generated the strongest classification overall accuracy of 93.5% using the first 4 seconds of radar track data for tracks that activated the avoidance system. Subsampling the available track data increased the available training data with the maximum aircraft recall of 0.94 achieved using the SVM with 1 second track data.

Chester V. Dolph↗

NASA NTRSDate not supplied

Aerial Object Trajectory Classification by Training on Flight Controller Data and Testing on RADAR Generated Tracks

Onboard collision avoidance is needed to enable safe, autonomous flight operations for NASA projects such as Advanced Air Mobility (AAM), as well as many commercial applications. Real-time aerial object classification will improve onboard collision avoidance algorithm decision making and may reduce unnecessary activation of avoidance systems. This work trains an aircraft trajectory classifier using trajectories from flight controller logs and tests the classifier using RADAR collected trajectories during air to air experiments and ground to air experiments. In contrast to RADAR data, these flight controller logs are relatively abundant, which makes the possibility of substituting flight data for RADAR data an attractive, cost-effective option. The SVM model developed in this work achieved a 79.7% classification accuracy on the first second of radar trajectories of GA, multirotor sUAS, and fixed wing sUAS. Findings from this work indicate that it is feasible to classify sensor collected trajectories using a classifier trained on flight controller data.

Henry Holbrook↗

NASA NTRSDate not supplied

Aeroelastic Analysis of an Urban Air Mobility Rotor in Forward Edgewise Flight

Urban Air Mobility vehicle concepts represent a new type of vertical lift machine. From the use of multirotor configurations to the use of variable RPM for thrust control of rigid, propeller-style rotors, many of the UAM concepts observed in industry have departed significantly from traditional VTOL designs. While such novel vehicle types may provide beneficial mission capability and efficiency, they have not been as thoroughly studied as more traditional configurations, and new aeromechanics analysis must be conducted. Operating states such as low-tip-speed rotors in edgewise flight may prove to yield unusual aeroelastic behavior and must be investigated. In the present work, a rotorcraft comprehensive analysis is used to analyze the aeroelastic characteristics of a fixed-pitch, variable RPM rotor in edgewise flight. The rotor model, a three-bladed, fixed pitch propeller, was developed in a previous work. Floquet theory analysis is used to capture the periodic nature of the dynamics. Parameters such as rotor rotational speed, forward flight speed, and blade torsion stiffness are varied and their impact on performance and stability are assessed. A value of torsion stiffness is identified to yield stable flight from 0-100 kts with a wide range of RPM values. The results may be used to provide insight into the aeroelastic characteristics of certain UAM-type rotors.

Aeroelastic Analysis↗

NASA NTRSDate not supplied

Exploring Airfoil Table Generation using XFOIL and OVERFLOW

The rotorcraft design process is a continuously evolving field of research that incorporates a number of software programs. An accurate airfoil table is critical in the design and testing process for rotorcraft. With multiple flow solvers available and flow conditions of multirotor UAM vehicles potentially covering a wide range of Reynolds and Mach numbers, a documented approach for developing airfoil tables is needed. Using benchmark data from legacy airfoil tables and wind tunnel tests for comparison, simulations for a comprehensive test matrix could guide rotorcraft design engineers in generating their own airfoil tables using the XFOIL and OVERFLOW solvers. The motivation for this study is to investigate flow solver features to develop a best practices document for airfoil table generation. The study uses the OVERFLOW and XFOIL flow solvers, coupled with the airfoil table generator AFTGen, to analyze three airfoils for a specific Reynolds numbers flow regime and provide details on how well each flow solver performs within a specific angle of attack range, Mach number range, Reynolds number range, and in different flow conditions, such as turbulent and transitional flow. OVERFLOW analyses in AFTGen for fully turbulent and transition flow are compared with XFOIL results and experimental test data for the section lift, section drag, and pressure coefficients. XFOIL ultimately yields results that are accurate within the linear angle of attack range and below a Mach number of 0.4 but tends to overpredict lift and underpredict drag unless the flow is in the compressible regime. XFOIL cannot accurately model stall and post-stall conditions due to the nature of the solver. This is evident in nearly every case run with XFOIL, where the linear range is usually predicted acceptably and the lift coefficient is overpredicted as the stall angle of attack is approached (with the exception being the generally poor correlation with most of the SSC-A09 cases). OVERFLOW is limited at low Mach numbers, and appears to perform best at Mach numbers of 0.4 and above. The exploration of airfoil table generation using XFOIL and OVERFLOW yielded moderately successful results for the NACA 0012 airfoil, reasonably good results for the RC(4)-10 airfoil, and less accurate results for the SSC-A09 airfoil.

Airfoil Table Generation↗

NASA NTRS2022

DataSet: Aerial Object Trajectory Classification by Training on Flight Controller Data and Testing on RADAR Generated

Onboard collision avoidance is needed to enable safe, autonomous flight operations for NASA projects such as Advanced Air Mobility (AAM), as well as many commercial applications. Real-time aerial object classification will improve onboard collision avoidance algorithm decision making and may reduce unnecessary activation of avoidance systems. This work trains an aircraft trajectory classifier using trajectories from flight controller logs and tests the classifier using RADAR collected trajectories during air to air experiments and ground to air experiments. In contrast to RADAR data, these flight controller logs are relatively abundant, which makes the possibility of substituting flight data for RADAR data an attractive, cost-effective option. The SVM model developed in this work achieved a 79.7% classification accuracy on the first second of radar trajectories of GA, multirotor sUAS, and fixed wing sUAS. Findings from this e that it is feasible to classify sensor collected trajectories using a classifier trained flight controller data.

Chester V Dolph↗

NASA NTRSDate not supplied

Time-Frequency Analysis of Experimental and Analytical Hub Loads of a Rotor Undergoing a Rotor Speed Change

A two-part analytical study was conducted examining a small-scale, two-bladed rotor undergoing a change in rotor speed in a wind tunnel setting. First, a parametric study was conducted to understand how rotor transient response, determined using a time-marching solution, is affected by the choice of rotor wake model, blade elasticity, and inclusion of an elastic support structure model. The second part of the study compared results from an analytical model of the NASA Multirotor Test Bed (MTB) undergoing a rotor speed change to experimental data. Since the analytical and experimental time histories were non-stationary signals, a Stockwell transform was employed to analyze the data in lieu of traditional Fourier transform-based methods. The analysis included extraction of time-varying frequency content of the rotor thrust and hub motion, damping ratios, instantaneous rotor speed, and instantaneous phase difference between thrust and hub motion. Use of a free wake model was found to be necessary to predict higher-harmonic thrust, however, it underpredicted the amplitude of the unsteady loads. Modeling the elasticity of the stiff rotor blades installed on the MTB resulted in minimal impact on the vibratory loads compared to a rigid blade model. The current analytical model of the MTB, including an elastic support structure, properly predicted the measured trends in the frequency content of the thrust.

Rotor dynamics↗

NASA NTRSDate not supplied

Time-Frequency Analysis of Experimental and Analytical Hub Loads of a Rotor Undergoing a Rotor Speed Change

A two-part analytical study was conducted examining a small-scale, two-bladed rotor undergoing a change in rotor speed. First, a parametric study was conducted to understand how rotor transient response, determined using a time-marching solution, is affected by the choice of rotor wake model, blade elasticity, and inclusion of an elastic support structure model. The second part of the study compared results from an analytical model of the NASA Multirotor Test Bed (MTB) undergoing a rotor speed change to wind tunnel data. Since the analytical and experimental time histories were nonstationary signals, a Stockwell transform was employed to analyze the data in lieu of traditional Fourier transform-based methods. The analysis included extraction of time-varying frequency content of the rotor thrust and hub motion, damping ratios, instantaneous rotor speed, and instantaneous phase difference between thrust and hub motion. Use of a free wake model was found to be necessary to predict higher-harmonic thrust, however, it underpredicted the amplitude of the unsteady loads. Modeling the elasticity of the stiff rotor blades installed on the MTB resulted in minimal impact on the computed vibratory loads compared to a rigid blade model. The current analytical model of the MTB, including an elastic support structure, properly predicted the measured trends in the frequency content of the thrust.

Martin K Sekula↗

NASA NTRS2023

Vibration Anomaly Indicator in UAVs in presence of Wind

One of the critical factors affecting flight safety of unmanned aerial vehicles (UAVs) is the amount of vibration they are exposed during a flight. For UAVs under remote operation, vehicle stabilization and navigation is typically achieved by estimating its attitude and position using onboard miniature sensors such as accelerometers, gyroscopes, and GPS via an onboard autopilot. Since precise control of the UAV relies heavily on the attitude sensing, the vibration levels need to be as low as possible in order to minimize the signal noise. Incorrect sensor data can lead to uncertain state estimation causing the multirotor to drift from its desired position. Moreover, high vibrations can induce faults in the safety-critical components of the UAV such as its on-board sensors, motors and propellers. Hence, it is important to monitor the vibration levels during a UAV flight. This paper specifically looks into effect of wind on the vibrations recorded by the autopilot system in an octocopter. Using data from experimental flights under varying wind conditions, we aim to classify between a nominal and anomalous vibration level and define a safety metric known as the Vibrational Anomaly Indicator (VAI) for small UAV systems. Further, we will study effect of high vibrations on the inertial measurement unit (IMU) of an octocopter under laboratory set-up and compute the VAI from IMU measurements. Results would demonstrate the utility of VAI as an health indicator for unmanned flights either in presence of winds or from degraded on-board IMU sensor.

Vibration↗

NASA NTRS2023

Simulation of a Single Rotor and a Quadrotor Hovering in Full and Partial Ground Effect

With the development of urban air mobility, the safety of multirotor vehicle operations in proximity to vertiports must be assessed. This paper examines high-fidelity blade-resolved OVERFLOW simulations and medium-fidelity vortex particle–mesh simulations that capture the aerodynamics of a rotorcraft in full and partial ground effect. Results obtained with each CFD method are compared to verify the consistency of the models introduced in the latter, which include an immersed lifting line for the blade aerodynamics and various boundary conditions to account for solid surfaces such as ground and walls. Satisfactory agreement is obtained for the blade loads and rotorwash velocity profiles in the case of a single rotor, except for small discrepancies at the blade tip. Finally, a quadrotor air taxi is simulated to quantify the load imbalance when the vehicle hovers above a rooftop edge. The combined use of high- and medium-fidelity methods is envisioned to accelerate the workflow when a large number of configurations need to be tested.

HEC↗

NASA NTRSDate not supplied

Visual and Inertial Datasets for an eVTOL Aircraft Approach and Landing Scenario

A National Aeronautics and Space Administration (NASA) project developing computer vision algorithms for autonomous flight is producing real-world datasets with cameras mounted on aircraft. In related domains, such as autonomous driving, open datasets are key to innovation and advancement in computer vision and autonomous perception for future Advanced Air Mobility (AAM) operations. Few vision datasets, however, are publicly available in the aviation context. This paper introduces preliminary datasets containing several examples of approach and landing scenarios. The platform aircraft include a multirotor small unmanned aerial system (sUAS) and a crewed helicopter as surrogates for future electric vertical take-off and landing (eVTOL) aircraft. The dataset provides video imagery with associated inertial navigation system-global positioning system (INS-GPS) position and attitude estimates and other sensors. Surveyed locations of the visual features of the landing area are included. This dataset is the first to be released in an ongoing effort to collect and share large, diverse datasets relevant to autonomous aviation; community critique that can inform and improve future flight campaigns is welcome.

Nelson Brown↗

NASA NTRSDate not supplied

Static and Forced Oscillation Wind Tunnel Tests of A Tandem Propeller Configuration

A series of static and forced oscillation tests were conducted using a tandem propeller configuration in the NASA Langley 12-Foot Low-Speed Tunnel. The primary objectives were to quantify the effect of aerodynamic interactions on propeller thrust and identify conditions where the effect is most significant. A secondary objective was to obtain a preliminary data set from dynamic testing to assess the impact of angular rate on thrust performance. This paper presents analysis of the experimental data, which includes propeller performance measurements and qualitative flow visualization. The static results show that the rear propeller in the tandem configuration can experience thrust degradations greater than 30%. The extent of the wake interaction is a function of the hub separation distance and the advance ratio of the front propeller. Forced oscillation results showed that the front propeller exhibited primarily linear behavior across the conditions tested, whereas the rear propeller exhibited dynamic nonlinearity in the region of significant thrust degradation. These results are intended to support high-fidelity modeling research, particularly for flight dynamics simulation development to aid trajectory prediction, control design, and identification of hazardous conditions for multirotor vehicles.

Aerodynamic Interactions↗

NASA NTRS2025

Distributed Sensing Node Configuration

A vision and radar sensor integration strategy for surveillance of Advance Air Mobility Mission concept of airspace is contained in the CAD drawing in this publication developed as part of NASA's Transformational Tools and Technology project. High-density airspace operations with multiple aircraft type and potentially noncooperative aircraft require distributed sensor detection and tracking systems to monitor airspace for safe, autonomous flight operations for advanced air mobility, urban air mobility, and high density small uncrewed air systems (SUAS) flight concepts. Contained herein are drawings that are available in the stp and creo file formats of the distributed sensing nodes. Additional dovetail integration is included to enable rapid changing of embedded system. A day in the life node deployment is included in the 2023_last_flight_day.mp4. Please cite this publication if you use these drawings. This sensor configuration methodology is presented in detail in the publication reference below. Chester Dolph, Thomas Lombaerts, Corey A. Ippolito, Vahram Stepanyan, Evan Kawamura, Keerthana Kannan, George Szatkowski, Todd Ferante, Christopher Morris, Federica Vitiello, Flavia Causa, Roberto Opromolla and Giancarmine Fasano. "Distributed Sensor Fusion of Ground and Air Nodes using Vision and Radar Modalities for Tracking Multirotor Small Uncrewed Air Systems and Birds," AIAA 2024-1781. AIAA SCITECH 2024 Forum. January 2024.

Chester V Dolph↗

NASA NTRS2018

Numerical Investigation of Multi-Rotor Configurations

The development of a conservative, parallel blade-element rotor model and its implementation into an adaptive Cartesian method is briefly reviewed. The model is first validated and then applied in edgewise forward flight for a variety of configurations. Validation studies comparing torque required for an isolated rotor match XV-15 wind tunnel trends well. Simulations of a simple quadrotor in “×” and “+” configurations are performed, demonstrating how the trailing rotor(s) lose thrust because of unfavorable aerodynamic interactions with the forward rotor(s), while power required remains near constant. A modified “+1” configuration is also examined, where the lateral rotors are brought inboard by 25%. This configuration showed a further 2% performance improvement over the “+” arrangement. The final paper will also include validation of a tandem rotor configuration with wind tunnel data as well as results and analysis of unsteady quadcopter simulations. In addition, a 4th configuration (× will be analyzed.

Multirotor↗

NASA NTRSDate not supplied

Utilizing Advanced Air Mobility Rotorcraft Tools for Wildfire Applications

Over the past decade, due in large part to heavy investment in the field of Advanced Air Mobility (AAM), significant progress in rotorcraft-focused modeling tools has been made. Such progress has notably increased AAM rotorcraft modeling capabilities in the topics of conceptual design, preliminary design, and more recently flight dynamics. Yet, due to recent and persistent increases in extreme weather events, an emerging interest has been raised in utilizing such modeling capabilities for aiding in emergency relief efforts and other public good missions. This paper uses wildfire fighting as a representative public good mission and demonstrates the relevance of the NASA Revolutionary Vertical Lift Technology (RVLT) rotorcraft toolchain to such missions. An emphasis is placed on flight dynamics modeling and control because of the hazards and challenges associated with the atmospheric environment of wildfires. In this work, the NASA FlightCODE tool was used to analyze both a UH-60 and the NASA six-passenger quadcopter reference model hovering in an experimentally informed wildfire turbulent environment. Preliminary results of this study estimate actuator usage exceedances and disturbance rejection capabilities of the vehicles’ translational rate command systems. Leveraging the RVLT toolchain, refinement and expansion of this work could lead to handling qualities envelope estimation and design optimization for wildfire turbulent environments. This would provide pilots with additional information to make real-time decisions in high-risk scenarios and begins preparations for simulating these dangerous environments for pilot training and experimentation.

Rotorcraft↗

NASA NTRSDate not supplied

Utilizing Advanced Air Mobility Rotorcraft Tools for Wildfire Applications

Over the past decade, due in large part to heavy investment in the field of Advanced Air Mobility (AAM), significant progress in rotorcraft-focused modeling tools has been made. Such progress has notably increased AAM rotorcraft modeling capabilities in the topics of conceptual design, preliminary design, and more recently flight dynamics. Yet, due to recent and persistent increases in extreme weather events, an emerging interest has been raised in utilizing such modeling capabilities for aiding in emergency relief efforts and other public good missions. This paper uses wildfire fighting as a representative public good mission and demonstrates the relevance of the NASA Revolutionary Vertical Lift Technology (RVLT) rotorcraft toolchain to such missions. An emphasis is placed on flight dynamics modeling and control because of the hazards and challenges associated with the atmospheric environment of wildfires. In this work, the NASA FlightCODE tool was used to analyze both a UH-60 and the NASA six-passenger quadcopter reference model hovering in an experimentally informed wildfire turbulent environment. Preliminary results of this study estimate actuator usage exceedances and disturbance rejection capabilities of the vehicles’ translational rate command systems. Leveraging the RVLT toolchain, refinement and expansion of this work could lead to handling qualities envelope estimation and design optimization for wildfire turbulent environments. This would provide pilots with additional information to make real-time decisions in high-risk scenarios and begins preparations for simulating these dangerous environments for pilot training and experimentation.

Rotorcraft↗