Search NASA⌕ Search

SEARCH · Search NASA

Results for “NONLINEAR PROGRAMMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Automated design and optimization of flexible booster autopilots via linear programming, volume 1

A nonlinear programming technique was developed for the automated design and optimization of autopilots for large flexible launch vehicles. This technique, which resulted in the COEBRA program, uses the iterative application of linear programming. The method deals directly with the three main requirements of booster autopilot design: to provide (1) good response to guidance commands; (2) response to external disturbances (e.g. wind) to minimize structural bending moment loads and trajectory dispersions; and (3) stability with specified tolerances on the vehicle and flight control system parameters. The method is applicable to very high order systems (30th and greater per flight condition). Examples are provided that demonstrate the successful application of the employed algorithm to the design of autopilots for both single and multiple flight conditions.

Hauser, F. D.↗
NASA NTRS1993

Robust Neighboring Optimal Guidance for the Advanced Launch System

In recent years, optimization has become an engineering tool through the availability of numerous successful nonlinear programming codes. Optimal control problems are converted into parameter optimization (nonlinear programming) problems by assuming the control to be piecewise linear, making the unknowns the nodes or junction points of the linear control segments. Once the optimal piecewise linear control (suboptimal) control is known, a guidance law for operating near the suboptimal path is the neighboring optimal piecewise linear control (neighboring suboptimal control). Research conducted under this grant has been directed toward the investigation of neighboring suboptimal control as a guidance scheme for an advanced launch system.

Hull, David G.↗
NASA NTRS1977

Comparison of some optimal control methods for the design of turbine blades

This paper attempts a comparative study of some numerical methods for the optimal control design of turbine blades whose vibration characteristics are approximated by Timoshenko beam idealizations with shear and incorporating simple boundary conditions. The blade was synthesized using the following methods: (1) conjugate gradient minimization of the system Hamiltonian in function space incorporating penalty function transformations, (2) projection operator methods in a function space which includes the frequencies of vibration and the control function, (3) epsilon-technique penalty function transformation resulting in a highly nonlinear programming problem, (4) finite difference discretization of the state equations again resulting in a nonlinear program, (5) second variation methods with complex state differential equations to include damping effects resulting in systems of inhomogeneous matrix Riccatti equations some of which are stiff, (6) quasi-linear methods based on iterative linearization of the state and adjoint equation. The paper includes a discussion of some substantial computational difficulties encountered in the implementation of these techniques together with a resume of work presently in progress using a differential dynamic programming approach.

Desilva, B. M. E.↗
NASA NTRS1990

Ascent guidance algorithm using lidar wind measurements

The formulation of a general nonlinear programming guidance algorithm that incorporates wind measurements in the computation of ascent guidance steering commands is discussed. A nonlinear programming (NLP) algorithm that is designed to solve a very general problem has the potential to address the diversity demanded by future launch systems. Using B-splines for the command functional form allows the NLP algorithm to adjust the shape of the command profile to achieve optimal performance. The algorithm flexibility is demonstrated by simulation of ascent with dynamic loading constraints through a set of random wind profiles with and without wind sensing capability.

Cramer, Evin J.↗
NASA NTRS1986

The expanded LaGrangian system for constrained optimization problems

Smooth penalty functions can be combined with numerical continuation/bifurcation techniques to produce a class of robust and fast algorithms for constrainted optimization problems. The key to the development of these algorithms is the Expanded Lagrangian System which is derived and analyzed in this work. This parameterized system of nonlinear equations contains the penalty path as a solution, provides a smooth homotopy into the first-order necessary conditions, and yields a global optimization technique. Furthermore, the inevitable ill-conditioning present in a sequential optimization algorithm is removed for three penalty methods: the quadratic penalty function for equality constraints, and the logarithmic barrier function (an interior method) and the quadratic loss function (an interior method) for inequality constraints. Although these techniques apply to optimization in general and to linear and nonlinear programming, calculus of variations, optimal control and parameter identification in particular, the development is primarily within the context of nonlinear programming.

Poore, A. B.↗
NASA NTRS1988

The expanded Lagrangian system for constrained optimization problems

Smooth penalty functions can be combined with numerical continuation/bifurcation techniques to produce a class of robust and fast algorithms for constrained optimization problems. The key to the development of these algorithms is the Expanded Lagrangian System which is derived and analyzed in this work. This parameterized system of nonlinear equations contains the penalty path as a solution, provides a smooth homotopy into the first-order necessary conditions, and yields a global optimization technique. Furthermore, the inevitable ill-conditioning present in a sequential optimization algorithm is removed for three penalty methods: the quadratic penalty function for equality constraints, and the logarithmic barrier function (an interior method) and the quadratic loss function (an interior method) for inequality constraints. Although these techniques apply to optimization in general and to linear and nonlinear programming, calculus of variations, optimal control and parameter identification in particular, the development is primarily within the context of nonlinear programming.

Poore, A. B.↗
NASA NTRS1984

Applying optimization software libraries to engineering problems

Nonlinear programming, preliminary design problems, performance simulation problems trajectory optimization, flight computer optimization, and linear least squares problems are among the topics covered. The nonlinear programming applications encountered in a large aerospace company are a real challenge to those who provide mathematical software libraries and consultation services. Typical applications include preliminary design studies, data fitting and filtering, jet engine simulations, control system analysis, and trajectory optimization and optimal control. Problem sizes range from single-variable unconstrained minimization to constrained problems with highly nonlinear functions and hundreds of variables. Most of the applications can be posed as nonlinearly constrained minimization problems. Highly complex optimization problems with many variables were formulated in the early days of computing. At the time, many problems had to be reformulated or bypassed entirely, and solution methods often relied on problem-specific strategies. Problems with more than ten variables usually went unsolved.

Healy, M. J.↗
NASA NTRS1980

Preliminary demonstration of a robust controller design method

Alternative computational procedures for obtaining a feedback control law which yields a control signal based on measurable quantitites are evaluated. The three methods evaluated are: (1) the standard linear quadratic regulator design model; (2) minimization of the norm of the feedback matrix, k via nonlinear programming subject to the constraint that the closed loop eigenvalues be in a specified domain in the complex plane; and (3) maximize the angles between the closed loop eigenvectors in combination with minimizing the norm of K also via the constrained nonlinear programming. The third or robust design method was chosen to yield a closed loop system whose eigenvalues are insensitive to small changes in the A and B matrices. The relationship between orthogonality of closed loop eigenvectors and the sensitivity of closed loop eigenvalues is described. Computer programs are described.

Anderson, L. R.↗
NASA NTRS1974

Computer-aided design of control systems to meet many requirements

A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

Schy, A. A.↗
NASA NTRS1995

Practical aspects of variable reduction formulations and reduced basis algorithms in multidisciplinary design optimization

This paper discusses certain connections between nonlinear programming algorithms and the formulation of optimization problems for systems governed by state constraints. The major points of this paper are the detailed calculation of the sensitivities associated with different formulations of optimization problems and the identification of some useful relationships between different formulations. These relationships have practical consequences; if one uses a reduced basis nonlinear programming algorithm, then the implementations for the different formulations need only differ in a single step.

Lewis, Robert Michael↗
NASA NTRS1982

Further developments in the controlled growth approach for optimal structural synthesis

It is pointed out that the use of nonlinear programming methods in conjunction with finite element and other discrete analysis techniques have provided a powerful tool in the domain of optimal structural synthesis. The present investigation is concerned with new strategies which comprise an extension to the controlled growth method considered by Hajela and Sobieski-Sobieszczanski (1981). This method proposed an approach wherein the standard nonlinear programming (NLP) methodology of working with a very large number of design variables was replaced by a sequence of smaller optimization cycles, each involving a single 'dominant' variable. The current investigation outlines some new features. Attention is given to a modified cumulative constraint representation which is defined in both the feasible and infeasible domain of the design space. Other new features are related to the evaluation of the 'effectiveness measure' on which the choice of the dominant variable and the linking strategy is based.

Hajela, P.↗
NASA NTRS1991

A parallel trajectory optimization tool for aerospace plane guidance

A parallel trajectory optimization algorithm is being developed. One possible mission is to provide real-time, on-line guidance for the National Aerospace Plane. The algorithm solves a discrete-time problem via the augmented Lagrangian nonlinear programming algorithm. The algorithm exploits the dynamic programming structure of the problem to achieve parallelism in calculating cost functions, gradients, constraints, Jacobians, Hessian approximations, search directions, and merit functions. Special additions to the augmented Lagrangian algorithm achieve robust convergence, achieve (almost) superlinear local convergence, and deal with constraint curvature efficiency. The algorithm can handle control and state inequality constraints such as angle-of-attack and dynamic pressure constraints. Portions of the algorithm have been tested. The nonlinear programming core algorithm performs well on a variety of static test problems and on an orbit transfer problem. The parallel search direction algorithm can reduce wall clock time by a factor of 10 for this part of the computation task.

Psiaki, Mark L.↗
NASA NTRS1997

Preliminary Design of Low-Thrust Interplanetary Missions

For interplanetary missions, highly efficient electric propulsion systems can be used to increase the mass delivered to the destination and/or reduce the trip time over typical chemical propulsion systems. This technology is being demonstrated on the Deep Space 1 mission - part of NASA's New Millennium Program validating technologies which can lower the cost and risk and enhance the performance of future missions. With the successful demonstration on Deep Space 1, future missions can consider electric propulsion as a viable propulsion option. Electric propulsion systems, while highly efficient, produce only a small amount of thrust. As a result, the engines operate during a significant fraction of the trajectory. This characteristic makes it much more difficult to find optimal trajectories. The methods for optimizing low-thrust trajectories are typically categorized as either indirect, or direct. Indirect methods are based on calculus of variations, resulting in a two-point boundary value problem that is solved by satisfying terminal constraints and targeting conditions. These methods are subject to extreme sensitivity to the initial guess of the variables - some of which are not physically intuitive. Adding a gravity assist to the trajectory compounds the sensitivity. Direct methods parameterize the problem and use nonlinear programming techniques to optimize an objective function by adjusting a set of variables. A variety of methods of this type have been examined with varying results. These methods are subject to the limitations of the nonlinear programming techniques. In this paper we present a direct method intended to be used primarily for preliminary design of low-thrust interplanetary trajectories, including those with multiple gravity assists. Preliminary design implies a willingness to accept limited accuracy to achieve an efficient algorithm that executes quickly.

Sims, Jon A.↗
NASA NTRS1990

Constrained optimization using design of experiment surfaces

An algorithm for solving constrained optimization problems is presented. First, design of experiment techniques are used to survey the design space. After evaluating the objective and constraint functions, as specified by Taguchi orthogonal arrays, analytical models of these functions are generated using a least-squares regression analysis. Next, a nonlinear programming package is used to optimize the analytical model. Based on the optimization information, the design space is reduced so as to close in around the minimum, and the entire procedure is repeated until convergence. An important feature of the algorithm is that function gradients are not required; therefore, for problems in which gradients would have to be estimated using finite-differences the number of function evaluations required for the optimization is significantly reduced, when compared with traditional nonlinear programming techniques. In addition, there is no requirement that the gradients must be smooth and continuous.

Bolt, Marvin Vance↗
DOE OSTI2026

Data for KETCHUP: Parameterizing of Large-Scale Kinetic Models Using Multiple Datasets with Different Reference States

Repository for Kinetic Estimation Tool Capturing Heterogeneous Datasets Using Pyomo (KETCHUP), a flexible parameter estimation tool that leverages a primal-dual interior-point algorithm to solve a nonlinear programming (NLP) problem that identifies a set of parameters capable of recapitulating the steady-state fluxes and concentrations in wild-type and perturbed metabolic networks. KETCHUP can use K-FIT [2] input files. Example K-FIT input files are located in the K-FIT repository at https://github.com/maranasgroup/K-FIT.

Metabolomics↗
NASA NTRS1989

Generalized mathematical models in design optimization

The theory of optimality conditions of extremal problems can be extended to problems continuously deformed by an input vector. The connection between the sensitivity, well-posedness, stability and approximation of optimization problems is steadily emerging. The authors believe that the important realization here is that the underlying basis of all such work is still the study of point-to-set maps and of small perturbations, yet what has been identified previously as being just related to solution procedures is now being extended to study modeling itself in its own right. Many important studies related to the theoretical issues of parametric programming and large deformation in nonlinear programming have been reported in the last few years, and the challenge now seems to be in devising effective computational tools for solving these generalized design optimization models.

Papalambros, Panos Y.↗