Search NASA⌕ Search

SEARCH · Search NASA

Results for “NOZZLE EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Thrust improvement with ablative insert nozzle extension

Aspects are examined of an investigation by the Marshall Space Flight Center into the conceptual feasibility of increasing the thrust performance of the Space Shuttle Main Engine (SSME) by using a conical nozzle extension fitted with an ablative insert in order to achieve a low-cost, near-term gain in payload. The ablating insert would provide a controlled increase in nozzle expansion ratio during launch and early climbout (first 30-60 seconds) so as to reduce thrust loss from nozzle over-expansion in the lower atmosphere. Summaries are given of JPL studies in the area of: defining the near-wall flow environment in the extended nozzle insert region; selecting potential insert materials; conceptualizing an extension/insert geometrical configuration; and identifying future experimental efforts necessary to verify the feasibility of the concepts.

Clayton, R. M.↗
NASA NTRS1975

A finite-difference analysis of the nozzle starting process in an expansion tunnel

A suitable finite-difference method for computing the quasi-one-dimensional unsteady flow in an expansion tunnel nozzle was identified. The difference equations are presented along with the appropriate stability limits. A parametric study of the starting process in an expansion tunnel nozzle is made, and acceptable operating conditions were determined.

Weilmuenster, K. J.↗
NASA NTRS1992

Propellant production from the Martian atmosphere

Results are presented from a calculation of the specific impulses that can be generated through the combustion of cryogenic CO and O2 over a range of fuel/oxidizer ratios, chamber pressures, nozzle expansion ratios, freestream pressures representative of Mars, and the limiting conditions of equilibrium and frozen nozzle flow. For an expansion ratio of 80 and 100-atm. chamber pressure, a specific impulse of 298 sec was obtained; this is comparable to the best solid rocket propellants.

Bowles, J. V.↗
NASA NTRS1986

A high flux pulsed source of energetic atomic oxygen

The design and demonstration of a pulsed high flux source of nearly monoenergetic atomic oxygen are reported. In the present test setup, molecular oxygen under several atmospheres of pressure is introduced into an evacuated supersonic expansion nozzle through a pulsed molecular beam valve. A 10J CO2 TEA laser is focused to intensities greater than 10 to the 9th W/sq cm in the nozzle throat, generating a laser-induced breakdown with a resulting 20,000-K plasma. Plasma expansion is confined by the nozzle geometry to promote rapid electron-ion recombination. Average O-atom beam velocities from 5-13 km/s at fluxes up to 10 to the 18th atoms/pulse are measured, and a similar surface oxygen enrichment in polyethylene samples to that obtained on the STS-8 mission is found.

Krech, Robert H.↗
NASA NTRS1988

Wave processes in scramjet thrust generation

The investigation explores the steady, supersonic expansion and compression wave processes involved in generating thrust from a combustion jet in a two-dimensional scramjet. Two types of thrust generating wave are produced by the jet. The first is the injection compression waves associated with injection and combustion of the fuel, and the second is the expansion interaction waves associated with interaction between the exhaust nozzle expansion and the jet. Analysis shows that the strength of a wave is not modified by crossing the jet, which implies that, with a given flow configuration, the jets in a multiple jet combustion array produce thrust independently of one another. Shock tunnel experiments with hydrogen fuel and three simple scramjet configurations are used to identify the two types of waves, to confirm the effect on a wave of crossing the jet, and to demonstrate the influence of the basic, fuel-off flow configuration on the effects produced by the waves.

Stalker, R. J.↗
NASA NTRS1993

Internal performance characteristics of vectored axisymmetric ejector nozzles

A series of vectoring axisymmetric ejector nozzles were designed and experimentally tested for internal performance and pumping characteristics at NASA-Langley Research Center. These ejector nozzles used convergent-divergent nozzles as the primary nozzles. The model geometric variables investigated were primary nozzle throat area, primary nozzle expansion ratio, effective ejector expansion ratio (ratio of shroud exit area to primary nozzle throat area), ratio of minimum ejector area to primary nozzle throat area, ratio of ejector upper slot height to lower slot height (measured on the vertical centerline), and thrust vector angle. The primary nozzle pressure ratio was varied from 2.0 to 10.0 depending upon primary nozzle throat area. The corrected ejector-to-primary nozzle weight-flow ratio was varied from 0 (no secondary flow) to approximately 0.21 (21 percent of primary weight-flow rate) depending on ejector nozzle configuration. In addition to the internal performance and pumping characteristics, static pressures were obtained on the shroud walls.

Lamb, Milton↗
NASA NTRS1990

High pressure Mach 10 to 20 electrothermal hypersonic wind tunnel

A new technique is described for generating high enthalpy, long pulse flows for testing scramjet combustors at equivalent flight Mach numbers of 10 to 20. The approach derives from high pressure discharge technology developed for electrothermal guns and space thrusters. Cryogenic liquid air is heated with a high power electric discharge (500 MW for a 15 kg/sec test flow rate) in a capillary tube, generating a quasi-steady pressure of up to 6800 atm at 20,000 K. The heated air is mixed with additional cryogenic air and is expanded in a conventional supersonic nozzle to 0.5 to 1 atm at 3000 to 6000 m/sec. Combustion and nozzle expansion test time of approximately 300 m/sec are contemplated. Facility nozzle chemical kinetics calculations show that above Mach 16 increasing concentrations of argon and oxygen replenishment are required to obtain suitable test conditions. Initial experiments on a subscale test rig are described for 0.5 kg/sec and 300 atm pressure.

Burton, R. L.↗
NASA NTRS2005

AXISYMMETRIC, THROTTLEABLE NON-GIMBALLED ROCKET ENGINE

A rocket engine assembly is provided for a vertically launched rocket vehicle. A rocket engine housing of the assembly includes two or more combustion chambers each including an outlet end defining a sonic throat area. A propellant supply for the combustion chambers includes a throttling injector, associated with each of the combustion chambers and located opposite to sonic throat area, which injects the propellant into the associated combustion chamber. A modulator, which may form part of the injector, and which is controlled by a controller, modulates the flow rate of the propellant to the combustion chambers so that the chambers provide a vectorable net thrust. An expansion nozzle or body located downstream of the throat area provides expansion of the combustion gases produced by the combustion chambers so as to increase the net thrust.

Sackheim, Robert L.↗
NASA NTRS1975

Effects of vibrational nonequilibrium on the inviscid design of an axisymmetric nozzle for hypersonic flow

An axisymmetric, hypersonic nozzle for arc-heated air is described. The method of characteristics is used to compute an inviscid nozzle contour in which vibrational nonequilibrium is approximated by the sudden-freeze technique. Chemical reactions are shown to freeze early in the nozzle expansion, and the result of vibrational and chemical freezing on the nozzle contour is demonstrated. The approximate nozzle design is analyzed by an exact calculation based on the method of characteristics for flow with vibrational nonequilibrium. Exit profiles are computed, and the usefulness of the approximate design is discussed. An analysis of the nozzle performance at off-design conditions is presented.

Anders, J. B., Jr.↗
NASA NTRS1994

Static performance investigation of a skewed-throat multiaxis thrust-vectoring nozzle concept

The static performance of a jet exhaust nozzle which achieves multiaxis thrust vectoring by physically skewing the geometric throat has been characterized in the static test facility of the 16-Foot Transonic Tunnel at NASA Langley Research Center. The nozzle has an asymmetric internal geometry defined by four surfaces: a convergent-divergent upper surface with its ridge perpendicular to the nozzle centerline, a convergent-divergent lower surface with its ridge skewed relative to the nozzle centerline, an outwardly deflected sidewall, and a straight sidewall. The primary goal of the concept is to provide efficient yaw thrust vectoring by forcing the sonic plane (nozzle throat) to form at a yaw angle defined by the skewed ridge of the lower surface contour. A secondary goal is to provide multiaxis thrust vectoring by combining the skewed-throat yaw-vectoring concept with upper and lower pitch flap deflections. The geometric parameters varied in this investigation included lower surface ridge skew angle, nozzle expansion ratio (divergence angle), aspect ratio, pitch flap deflection angle, and sidewall deflection angle. Nozzle pressure ratio was varied from 2 to a high of 11.5 for some configurations. The results of the investigation indicate that efficient, substantial multiaxis thrust vectoring was achieved by the skewed-throat nozzle concept. However, certain control surface deflections destabilized the internal flow field, which resulted in substantial shifts in the position and orientation of the sonic plane and had an adverse effect on thrust-vectoring and weight flow characteristics. By increasing the expansion ratio, the location of the sonic plane was stabilized. The asymmetric design resulted in interdependent pitch and yaw thrust vectoring as well as nonzero thrust-vector angles with undeflected control surfaces. By skewing the ridges of both the upper and lower surface contours, the interdependency between pitch and yaw thrust vectoring may be eliminated and the location of the sonic plane may be further stabilized.

Wing, David J.↗
NASA NTRS1980

Investigation of convergent-divergent nozzles applicable to reduced-power supersonic cruise aircraft

An investigation was conducted of isolated convergent-divergent nozzles to determine the effect of several design parameters on nozzle performance. Tests were conducted using high pressure air for propulsion simulation at Mach numbers from 0.60 to 2.86 at an angle of attack of 0 deg and at nozzle pressure ratios from jet off to 46.0. Three power settings (dry, partial afterburning, and maximum afterburning), three nozzle lengths, and nozzle expansion ratios from 1.22 to 2.24 were investigated. In addition, the effects of nozzle throat radius and a cusp in the external boattail geometry were studied. The results of this study indicate that, for nozzles operating near design conditions, increasing nozzle length increases nozzle thrust-minus-drag performance. Nozzle throat radius and an external boattail cusp had negligible effects on nozzle drag or internal performance.

Berrier, B. L.↗
NASA NTRS1985

Two-Phase Wet/Dry Engine for Waste-Heat Recovery

Novel supersonic fluid expansion nozzle used to vaporize toluene (or other drying-type organic liquid) by expansion through two-phase region to drive impulse turbine in Rankine-cycle engine.

Elliott, D. G.↗
NASA NTRS1995

Vibrational Energy Coupling in Expanding N2/O2/NO Admixtures

Recent direct measurements of N2 and O2 vibrational populations in expansions of synthetic air show a closer coupling of the vibrational energies than indicated by adapting earlier experimental results from shock compressions to the nozzle expansion problem. An important difference between the shock wave and nozzle flow problems is the presence of NO in significant amounts throughout the relaxation in the case of a nozzle flow. This may account for the stronger coupling since NO is well suited to promote vibrational energy exchange. The results of a series of experiments and analysis examining vibrational energy coupling in expansions of admixtures approximating air are reported. N2 and O2 vibrational populations are determined by a single-pulse spontaneous Raman scattering technique. NO vibrational populations are determined by broadband absorption by the NO(y) system. The resulting data permit the role of NO in promoting vibrational energy coupling to be better understood, and are used to evaluate models of vibrational energy exchange for application to expanding flows.

Gilmore, John O.↗
NASA NTRS2010

Analysis of Nozzle Jet Plume Effects on Sonic Boom Signature

An axisymmetric full Navier-Stokes computational fluid dynamics (CFD) study was conducted to examine nozzle exhaust jet plume effects on the sonic boom signature of a supersonic aircraft. A simplified axisymmetric nozzle geometry, representative of the nozzle on the NASA Dryden NF-15B Lift and Nozzle Change Effects on Tail Shock (LaNCETS) research airplane, was considered. The highly underexpanded nozzle flow is found to provide significantly more reduction in the tail shock strength in the sonic boom N-wave pressure signature than perfectly expanded and overexpanded nozzle flows. A tail shock train in the sonic boom signature, similar to what was observed in the LaNCETS flight data, is observed for the highly underexpanded nozzle flow. The CFD results provide a detailed description of the nozzle flow physics involved in the LaNCETS nozzle at different nozzle expansion conditions and help in interpreting LaNCETS flight data as well as in the eventual CFD analysis of a full LaNCETS aircraft. The current study also provided important information on proper modeling of the LaNCETS aircraft nozzle. The primary objective of the current CFD research effort was to support the LaNCETS flight research data analysis effort by studying the detailed nozzle exhaust jet plume s imperfect expansion effects on the sonic boom signature of a supersonic aircraft. Figure 1 illustrates the primary flow physics present in the interaction between the exhaust jet plume shock and the sonic boom coming off of an axisymmetric body in supersonic flight. The steeper tail shock from highly expanded jet plume reduces the dip of the sonic boom N-wave signature. A structured finite-volume compressible full Navier-Stokes CFD code was used in the current study. This approach is not limited by the simplifying assumptions inherent in previous sonic boom analysis efforts. Also, this study was the first known jet plume sonic boom CFD study in which the full viscous nozzle flow field was modeled, without coupling to a sonic boom propagation analysis code, from the stagnation chamber of the nozzle to the far field external flow, taking into account all nonisentropic effects in the shocks, boundary layers, and free shear layers, and their interactions at distances up to 30 times the nozzle exit diameter from the jet centerline. A CFD solution is shown in Figure 2. The flow field is very complicated and multi-dimensional, with shock-shock and shockplume interactions. At the time of this reporting, a full three-dimensional CFD study was being conducted to evaluate the effects of nozzle vectoring on the aircraft tail shock strength.

Bui, Trong↗
NASA NTRS1972

Liquid propellant rockets.

A brief overview of the state of knowledge in liquid rocket technology is presented and examples are provided of instances where some fundamental principles of chemistry, fluid mechanics, and mathematics can be applied. A liquid propellant rocket classification is discussed together with rocket system performance, applications for liquid propellants, the effective exhaust velocity, aspects of simplified nozzle expansion, questions about theoretical propellant performance, the effect of chamber pressure on equilibrium performance, and the kinetic recombination in nozzles. Details of propellant combustion are examined, giving attention to propellant injection, evaporation-controlled combustion, combustion instability, and monopropellant decomposition.

Dipprey, D. F.↗
NASA NTRS1976

Two-phase turbine engines

A description is given of a two-phase turbine which utilizes a uniform mixture of gas and liquid accelerated in nozzles of the types reported by Elliott and Weinberg (1968). The mixture acts directly on an axial flow or tangential impulse turbine or is separated into gas and liquid streams which operate separately on a gas turbine and a hydraulic turbine. The basic two-phase cycles are examined, taking into account working fluids, aspects of nozzle expansion, details of turbine cycle operation, and the effect of mixture ratio variation. Attention is also given to two-phase nozzle efficiency, two-phase turbine operating characteristics and efficiencies, separator turbines, and impulse turbine experiments.

Elliott, D. G.↗
NASA NTRS1968

One-dimensional reacting gas nonequilibrium performance program

Computer program calculates the inviscid one-dimensional equilibrium, frozen, and nonequilibrium nozzle expansion of gaseous propellant exhaust mixtures containing the elements - carbon, hydrogen, oxygen, nitrogen, fluorine and chlorine. The program performs calculations for conical nozzles only.

Frey, H. M.↗