Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nanoparticle analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Growth and characterization of ZnSe nanoparticles

ZnSe nanoparticles were prepared using a chemical bath deposition technique. X-ray diffraction study shows that the ZnSe crystallizes in the cubic phase. The crystallite size of the ZnSe samples calculated using the Scherrer’s formula was found to be slightly smaller than the Bohr exciton radius of bulk ZnSe. SEM studies show the growth of a mixture of nanorods and spherical nanoparticles. EDAX analysis confirms that the synthesized ZnSe nanoparticles are of good stiochiometry. Optical studies show the blue shift in the absorption edge for ZnSe nanoparticles caused by quantum confinement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and optical analysis of Fe doped NiO nanoparticles synthesized by chemical precipitation route

Highlights: • The Fe doped NiO nanoparticles were synthesized by chemical precipitation route. • XRD analysis reveals cubic rock-salt fcc structure of the synthesized nanoparticles. • The Ni-O and Fe-O bonding were confirmed through FTIR spectroscopy. • Existence of nickel or interstitial oxygen vacancies indicates p-type nature of nanoparticles. - Abstract: The Ni{sub 1-x}Fe{sub x}O (x = 0.00, 0.02, 0.04 and 0.06) nanoparticles are synthesized by chemical precipitation route using polyvinyl-pyrrolidone (PVP) and nitrate metal salts. The results of thermogravimetric analysis (TGA) of the synthesized dried hydroxide powders showed that thermal decomposition occurs up to 500 °C so as to form pure Ni{sub 1-x}Fe{sub x}O. Therefore, all synthesized samples were calcined at 500 °C for 4 h and then used for further characterization. Energy dispersive X-ray spectroscopy (EDS) of all the samples showed the presence of Ni, O and Fe without any other impurities. From X-ray diffraction (XRD) and transmission electron microscopy (TEM) we could prove that the samples are polycrystalline in nature and are in single phase. The different vibrational modes in Ni{sub 1-x}Fe{sub x}O (x = 0.00, 0.02, 0.04 and 0.06) nanoparticles were studied by Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR). Further, we analyzed the optical response from ultraviolet-visible spectra and Photoluminescence (PL) spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aspect ratio control and photocatalytic properties analysis of anatase TiO2 nanoparticles

Highlights: • TiO{sub 2} nanoparticles with different aspect ratio were prepared and characterized. • Their aspect ratio is tuned by varying surfactants molar ratio and concentration. • TiO{sub 2} nanoparticles show photocatalytic activities in degradation of methylene blue. - Abstract: Anatase TiO{sub 2} nanoparticles with tuning size and aspect ratio were successfully prepared by a simple solvothermal method, using ethanol as a solvent, titanium butoxide as a precursor, and oleic acid and oleylamine as anionic and cationic capping agents, respectively. The average size and aspect ratio of these nanoparticles can be greatly regulated by varying the oleic acid/oleylamine molar ratio while keeping their total molar content constant and finely adjusted by increasing the total capping agents molar concentration in solvent at constant molar ratio (oleic acid/oleylamine molar ratio = 1:1). The variation of molar ratio or molar concentration enables a manipulation of the growth rate along different facets of TiO{sub 2} nanoparticles and, consequently, a control of the aspect ratio of these nanoparticles. Moreover, the photocatalytic degradation rate of methyl blue for sample prepared with molar ratio of oleic acid to oleylamine at 6:24 is over 11% higher than that for the other samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

I-V curve analysis of single-nanoparticle Al-doped SrTiO 3

Strontium Titanate (SrTiO 3 or STO) is an oxide-semiconductor material which shows promise for photocatalytic water splitting, but remains poorly understood. To better understand its carrier dynamics, STO nanoparticles deposited onto an Au substrate were placed inside of a Scanning Electron Microscope (SEM) and then contacted with an Au probe. Current-voltage (I-V) measurements were taken with and without electron beam illumination. Fitting to the curves, we estimate the doping density ($N_D \approx 10^{22.1 \pm 1.2}$ cm$^{-3}$) and built-in potential ($\phi_{bi} \approx 0.84 \pm 0.45$ eV). We then used these I-V measurements to estimate the diffusion time ($\tau$) of our samples and observed an exponential dependence of $\tau$ on sample size in the range of 350-550 nm.

36 MATERIALS SCIENCE↗

Replication Data for: Aggregated nanoparticles: Sample preparation and analysis by atom probe tomography

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural analysis of undoped and moderately Sc-doped TiO2 anatase nanoparticles using Scherrer equation and Debye function analysis

Highlights: • UV light sensitive undoped and moderate Sc-doped anatase nanocrystallites were prepared without post-synthesis annealing. • Elongated nanocrystallites were found by Scherrer equation and Debye Function Analysis applied to XRD data and also HRTEM. • 4 at.% Sc doping reduced the amount of Ti vacancies by half. • Doping showed ~0.3% growth of lattice parameters. - Abstract: UV light sensitive undoped and moderate (4 at.%) Sc-doped anatase nanocrystallites were prepared by an efficient and environmentally benign method based on homogeneous hydrolysis of TiOSO{sub 4} and Sc{sub 2}(C{sub 2}O{sub 4}){sub 3.5}H{sub 2}O aqueous solutions using urea as a precipitation agent, without post-synthesis calcination or annealing. X-ray diffraction study of the obtained powders revealed single phase anatase in both samples. Two different methods were applied to estimate the anatase crystallite size and shape from the X-ray diffraction data. The first one is based on the more conventional Scherrer equation (as implanted in GSAS-II program) while the second one is based on Debye function analysis (as implanted in DUBUSSY suite version 2.2), which is considered to be more adequate for nanocrystallites. Although each program has its own shape models, both methods indicated similar results of elongated nanocrystallite geometry for Sc-doped TiO{sub 2}: (i) GSAS-II confirmed ellipsoid shape with equatorial size of 5.1(0) nm and axial size of 6.8(0), (ii) DEBUSSY suite 2.2 showed cylinder shape with diameter of equivalent circle in the ab-plane, D{sub ab} = 4.9(1.0) nm and crystallite length along the c-axis, L{sub c} = 5.4(3.2) nm. For the undoped TiO{sub 2} sample, equatorial size of 5.5(0) nm and axial size of 7.3(0) nm for the ellipsoid shape was determined according to GSAS-II, while D{sub ab} = 5.5(1.3) nm and L{sub c} = 6.0(2.2) nm for the cylinder shape was determined by DEBUSSY suite 2.2. These outcomes were found to corroborate with HRTEM analysis. Doping with 4 at.% Sc caused ~0.3% growth of lattice parameters from a = 3.7979 [4] Å, c = 9.4995 [9] Å for the undoped sample to a = 3.8110 [7] Å, c = 9.5274 [16] Å for the moderately Sc doped sample, while reduction in the Ti vacancies by half was confirmed by both methods. The introducing of Sc as electronically active secondary species into the crystal lattice of TiO{sub 2} can greatly alter its optical absorption. The incorporation of Sc into the crystal lattice of TiO{sub 2} favors the substitution of Ti, as both have approximately the same ionic size, and generates surface oxygen vacancies which can act as trapping center for the photogenerated electrons and reduce the recombination of electron–hole pairs. We can expect Sc doped TiO{sub 2} nanomaterials to have applications as effective photocatalysts for selective photocatalytic oxidation of various environmental organic pollutants.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray Absorption Spectroscopy Investigation of Iodine Capture by Silver-Exchanged Mordenite

Capture of radioactive iodine is a significant consideration during reprocessing of spent nuclear fuel and disposal of legacy wastes. While silver-exchanged mordenite (AgZ) is widely regarded as a benchmark material for assessing iodine adsorption performance, previous research efforts have largely focused on bulk material properties rather than the underpinning molecular interactions that achieve effective iodine capture. As a result, the fundamental understanding necessary to identify and mitigate deactivation pathways for the recycle of AgZ is not available. In this paper, we applied X-ray Absorption Fine Structure (XAFS) spectroscopy to investigate AgZ following activation, adsorption of iodine, regeneration, and recycle, observing no appreciable degradation in performance due to the highly controlled conditions under which the AgZ was maintained. Fits of the extended XAFS (EXAFS) data reveal complete formation of Ag 0 nanoparticles upon treatment with H 2 , and confirm the formation of α-AgI within the mordenite channels in addition to surface γ/β-AgI nanoparticles following iodine exposure. Analysis of the nanoparticle size and fractional composition of α-AgI to γ/β-AgI supports ripening of surface nanoparticles as a function of recycle. Finally, this work provides a foundation for future investigation of AgZ deactivation under conditions relevant to spent nuclear fuel reprocessing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A bicarbonate-rich liquid condensed phase in non-saturated solutions in the absence of divalent cations

Bicarbonate (HCO 3 - ) and sodium (Na + )-containing solutions contain droplets of a separate, bicarbonate-rich liquid condensed phase (LCP) that have higher concentrations of HCO 3 - relative to the bulk solution in which they reside. The existence and composition of the LCP droplets has been investigated by nanoparticle tracking analysis, nuclear magnetic resonance spectroscopy, refractive index measurements and X-ray pair distribution function analysis. The bicarbonate-rich LCP species is a previously unaccounted-for, ionic phenomenon which occurs even in solutions with solely monovalent cations. Its existence requires re-evaluation of models used to describe and model aqueous solution physicochemistry, especially those used to describe and model carbonate mineral formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural evolution in crystalline MoO{sub 3} nanoparticles with tunable size

In this study MoO{sub 3} nanoparticles were prepared in porous Vycor glass by impregnation-decomposition cycles (IDC) with molybdenum(VI) 2-ethylhexanoate. X-ray diffraction data show that the nanoparticles are crystalline and are in the orthorhombic {alpha}-MoO{sub 3} phase. Raman spectroscopy data also indicate the formation of this phase. The profiles in the Raman spectra changed with the number of IDC, indicating a structural evolution of the MoO{sub 3} nanoparticles. The IDC methodology promoted a linear mass increase and allowed tuning the nanoparticle size. Analysis of HRTEM images revealed that for 3, 5 and 7 IDC, the MoO{sub 3} nanoparticle average diameters are 3.2, 3.6 and 4.2 nm. Diffuse reflectance spectroscopy indicates a consistent red shift in the band gap from 3.35 to 3.29 eV as the size increases from 3.2 to 4.2 nm. This observed red shift in the band gap of the MoO{sub 3} nanoparticles is presumably due to quantum confinement effects. - Graphical abstract: Modification of profile Raman spectra for crystalline MoO{sub 3} nanoparticles in function of the particle size. Highlights: Black-Right-Pointing-Pointer Structural evolution of the MoO{sub 3} nanoparticles as a function of the crystallite size. Black-Right-Pointing-Pointer Tunable optical properties by controlling the MoO{sub 3} nanoparticle size. Black-Right-Pointing-Pointer The impregnation-decomposition methodology allowed tuning the nanoparticle size. Black-Right-Pointing-Pointer The red shift in the band gap of the MoO{sub 3} nanoparticles is due to quantum size effect. Black-Right-Pointing-Pointer The short-distance order in MoO{sub 3} nanoparticle is function to area/volume ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Aging and Environment on Nanoparticle Chemistry: Implication to Confinement Effects in Nanoceria

The oxidation state switching of cerium in cerium oxide nanoparticles is studied in detail. The influence of synthesis medium, aging time and local environment on the oxidation state switching, between +3 and + 4, is analyzed by tracking the absorption edge using UV-Visible spectroscopy. It is observed that by tuning the local environment, the chemistry of the nanoparticles could be altered. These time dependent, environmentally induced changes likely contribute to inconsistencies in the literature regarding quantum-confinement effects for ceria nanoparticles. The results in this article indicate that there is a need to carry out comprehensive analysis of nanoparticles while considering the influence of synthesis and processing conditions, aging time and local environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated titanium dioxide (TiO{sub 2}) nanoparticles on interdigitated device electrodes (IDEs) for pH analysis

Titanium dioxide (TiO{sub 2}) nanoparticles based Interdigitated Device Electrodes (IDEs) Nanobiosensor device was developed for intracellular biochemical detection. Fabrication and characterization of pH sensors using IDE nanocoated with TiO{sub 2} was studied in this paper. In this paper, a preliminary assessment of this intracellular sensor with electrical measurement under different pH levels. 3-aminopropyltriethoxysilane (APTES) was used to enhance the sensitivity of titanium dioxide layer as well as able to provide surface modification by undergoing protonation and deprotonation process. Different types of pH solution provide different resistivity and conductivity towards the surface. Base solution has the higher current compared to an acid solution. Amine and oxide functionalized TiO{sub 2} based IDE exhibit pH-dependent could be understood in terms of the change in surface charge during protonation and deprotonation. The simple fabrication process, high sensitivity, and fast response of the TiO{sub 2} based IDEs facilitate their applications in a wide range of areas. The small size of semiconductor TiO{sub 2} based IDE for sensitive, label-free, real time detection of a wide range of biological species could be explored in vivo diagnostics and array-based screening.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Single step synthesis of nanostructured boron nitride for boron neutron capture therapy

Nanostructured Boron Nitride (BN) has been successfully synthesized by carbo-thermic reduction of Boric Acid (H{sub 3}BO{sub 3}). This method is a relatively low temperature synthesis route and it can be used for large scale production of nanostructured BN. The synthesized nanoparticles have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential thermal analyzer (DTA). XRD analysis confirmed the formation of single phase nanostructured Boron Nitride. SEM analysis showed that the particles are spherical in shape. DTA analysis showed that the phase is stable upto 900 °C and the material can be used for high temperature applications as well boron neutron capture therapy (BNCT)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comprehensive characterization of extracellular vesicles produced by environmental (Neff) and clinical (T4) strains of Acanthamoeba castellanii

We conducted a comprehensive comparative analysis of extracellular vesicles (EVs) from two Acanthamoeba castellanii strains, Neff (environmental) and T4 (clinical). Morphological analysis via transmission electron microscopy revealed slightly larger Neff EVs (average = 194.5 nm) compared to more polydisperse T4 EVs (average = 168.4 nm). Nanoparticle tracking analysis (NTA) and dynamic light scattering validated these differences. Proteomic analysis of the EVs identified 1,352 proteins, with 1,107 common, 161 exclusive in Neff, and 84 exclusively in T4 EVs. Gene ontology and Kyoto Encyclopedia of Genes and Genomes (KEGG) mapping revealed distinct molecular functions and biological processes and notably, the T4 EVs enrichment in serine proteases, aligned with its pathogenicity. Lipidomic analysis revealed a prevalence of unsaturated lipid species in Neff EVs, particularly triacylglycerols, phosphatidylethanolamines (PEs), and phosphatidylserine, while T4 EVs were enriched in diacylglycerols and diacylglyceryl trimethylhomoserine, phosphatidylcholine and less unsaturated PEs, suggesting differences in lipid metabolism and membrane permeability. Metabolomic analysis indicated Neff EVs enrichment in glycerolipid metabolism, glycolysis, and nucleotide synthesis, while T4 EVs, methionine metabolism. Furthermore, RNA-seq of EVs revealed differential transcript between the strains, with Neff EVs enriched in transcripts related to gluconeogenesis and translation, suggesting gene regulation and metabolic shift, while in the T4 EVs transcripts were associated with signal transduction and protein kinase activity, indicating rapid responses to environmental changes. In this novel study, data integration highlighted the differences in enzyme profiles, metabolic processes, and potential origins of EVs in the two strains shedding light on the diversity and complexity of A. castellanii EVs and having implications for understanding host-pathogen interactions and developing targeted interventions for Acanthamoeba-related diseases.

59 BASIC BIOLOGICAL SCIENCES↗