Results for “National Transonic Facility” — Page 4

NASA NTRS1981

Flow quality measurements in transonic wind tunnels and planned calibration of the National Transonic Facility

The need for mean flow and dynamic flow quality measurements for the National Transonic Facility (NTF) was considered. Past experience in making flow quality measurements in transonic flows and at cryogenic temperatures was used to guide the selection of methods to be used in the NTF. It appears that suitable instrumentation will be available and adequate experience has been obtained to insure that the proper calibration of the NTF can be made.

Stainback, P. C.↗

NASA NTRS1983

Video model deformation system for the National Transonic Facility

A photogrammetric closed circuit television system to measure model deformation at the National Transonic Facility is described. The photogrammetric approach was chosen because of its inherent rapid data recording of the entire object field. Video cameras are used to acquire data instead of film cameras due to the inaccessibility of cameras which must be housed within the cryogenic, high pressure plenum of this facility. A rudimentary theory section is followed by a description of the video-based system and control measures required to protect cameras from the hostile environment. Preliminary results obtained with the same camera placement as planned for NTF are presented and plans for facility testing with a specially designed test wing are discussed.

Burner, A. W.↗

NASA NTRS1989

Analysis of vibrations of the National Transonic Facility model support system using a 3-D aeroelastic code

Vibrations of the National Transonic Facility model support system were analyzed using Computational Aeroelasticity Program-Transonic Small Disturbance, a three-dimensional transonic small disturbance code designed for aeroelastic analysis of complete aircraft. The model support system was represented as a tunnel-spanning flexible wing whose structural properties were obtained from measured responses. Aeroelastic transients were calculated and analyzed to obtain modal stability characteristics. The results show that there is tendency to exhibit a hump mode instability in one of the modes, and that there are other weakly damped or unstable modes. Most of the motion is in the aft section of the model support system. The close proximity of the solid wind-tunnel diffuser side walls to the model support system is shown to have adverse effects on its aeroelastic stability characteristics. When the effects of the wind-tunnel walls are modeled, the analyses indicate the presence of wind-tunnel resonance modes which are not present when free-air boundary conditions are used.

Whitlow, Woodrow, Jr.↗

NASA NTRS1992

Buffet test in the National Transonic Facility

A buffet test of a commercial transport model was accomplished in the National Transonic Facility at the NASA Langley Research Center. This aeroelastic test was unprecedented for this wind tunnel and posed a high risk for the facility. Presented here are the test results from a structural dynamics and aeroelastic response point of view. The activities required for the safety analysis and risk assessment are described. The test was conducted in the same manner as a flutter test and employed on-board dynamic instrumentation, real time dynamic data monitoring, and automatic and manual tunnel interlock systems for protecting the model.

Young, Clarence P., Jr.↗

NASA NTRS2014

Subsonic Transonic Applied Refinements By Using Key Strategies - STARBUKS In the NASA Langley Research Center National Transonic Facility

Several upgrade projects have been completed at the NASA Langley Research Center National Transonic Facility over the last 1.5 years in an effort defined as STARBUKS - Subsonic Transonic Applied Refinements By Using Key Strategies. This multi-year effort was undertaken to improve NTF's overall capabilities by addressing Accuracy and Validation, Productivity, and Reliability areas at the NTF. This presentation will give a brief synopsis of each of these efforts.

Paryz, Roman W.↗

NASA NTRSDate not supplied

Development of the Model Deformation System at the National Transonic Facility

This paper describes the model deformation system currently being developed for the National Transonic Facility at NASA Langley Research Center. The photogrammetry system uses up to eight network cameras that are time synced with an external hardware trigger. Camera extrinsics are calculated per frame with a bundle adjustment process with coded targets painted to the floor and walls of the test section. We describe our algorithm pipeline including the coded target system for target correspondence between camera views. We also present our future plans for modernizing the system.

Timothy Fahringer↗

NASA NTRSDate not supplied

Development of the model deformation system at the National Transonic Facility

This paper describes the model deformation system currently being developed for the National Transonic Facility at NASA Langley Research Center. The photogrammetry system uses up to eight network cameras that are time synced with an external hardware trigger. Camera extrinsics are calculated per frame with a bundle adjustment process with coded targets painted to the floor and walls of the test section. We describe our algorithm pipeline including the coded target system for target correspondence between camera views. We also present our future plans for modernizing the system.

Timothy Fahringer↗

NASA NTRSDate not supplied

Transition Measurements on the SWiFT Model in the National Transonic Facility

Boundary layer transition locations on the Swept Wing Flow Test (SWiFT) Hybrid Wing Body model were measured in the National Transonic Facility (NTF) at the NASA Langley Research Center using several different methods. These methods include sublimating chemical flow visualization for a limited number of low Reynolds number conditions, as well as mean static pressure and dynamic pressure measurements. Results are presented for a range of conditions in the NTF, demonstrating Mach and Reynolds number effects. The transition front locations obtained from the different techniques agree well. A variation of the static pressure transition detection method is described in which continuous angle of attack polars are performed. This approach enables detection of the transition front at more challenging (high Reynolds number) conditions than is possible with sparser data from pitch-pause angle-of-attack polars. The trip dot effectiveness is also verified using all of the available diagnostics. Additionally, low Reynolds number results are compared with those acquired on the same model at the Aircraft Research Association (ARA) facility, and these results show good agreement overall, suggesting similar freestream flow quality conditions of the two facilities.

National Transonic Facility↗

NASA NTRSDate not supplied

Transition Measurements on the SWiFT Model in the National Transonic Facility

Boundary layer transition locations on the Swept Wing Flow Test (SWiFT) Hybrid Wing Body model were measured in the National Transonic Facility (NTF) at the NASA Langley Research Center using several different methods. These methods include sublimating chemical flow visualization for a limited number of low Reynolds number conditions, as well as mean static pressure and dynamic pressure measurements. Results are presented for a range of conditions in the NTF, demonstrating Mach and Reynolds number effects. The transition front locations obtained from the different techniques agree well. A variation of the static pressure transition detection method is described in which continuous angle of attack polars are performed. This approach enables detection of the transition front at more challenging (high Reynolds number) conditions than is possible with sparser data from pitch-pause angle-of-attack polars. The trip dot effectiveness is also verified using all of the available diagnostics. Additionally, low Reynolds number results are compared with those acquired on the same model at the Aircraft Research Association (ARA) facility, and these results show good agreement overall, suggesting similar freestream flow quality conditions of the two facilities.

National Transonic Facility↗

NASA NTRS1985

National transonic facility Mach number system

The Mach number system for the Langley Research Center's National Transonic Facility was designed to measure pressures to determine Mach number to within + or - 0.002. Nine calibration laboratory type fused quartz gages, four different range gages for the total pressure measurement, and five different range gages for the static pressure measurement were used to satisfy the accuracy requirement over the 103,000-890,000 Pa total pressure range of the tunnel. The system which has been in operation for over 1 year is controlled by a programmable data process controller to select, through the operation of solenoid valves, the proper range fused quartz gage to maximize the measurement accuracy. The pressure gage's analog outputs are digitized by the process controller and transmitted to the main computer for Mach number computation. An automatic two-point on-line calibration of the nine quartz gages is provided using a high accuracy mercury manometer.

Kern, F. A.↗

NASA NTRS1988

A study of aeroelastic stability for the model support system of the National Transonic Facility

Oscillations of wind-tunnel models have been observed during testing in the National Transonic Facility. These oscillations have been the subject of an extensive investigation. As a part of this effort, a study of the aeroelastic stability of the model support structure has been performed. This structure is mathematically modelled as a wing and conventional flutter analysis is performed. The math model implemented both experimentally and numerically obtained modal characteristics. A technique for illustrating the flutter boundary for wind tunnels is demonstrated. Results indicate that the classical flutter boundary is well above the operating envelope of the facility. However, the analysis indicates a damping-dependent instability is present which is inherent in the design. One possible modification in the design has been evaluated which eliminates the predicted instability.

Strganac, Thomas W.↗

NASA NTRS1990

Data quality analysis at the National Transonic Facility

The data quality analysis program that was developed at Langley Research Center's National Transonic Facility is described. The program provides a computer driven systematic analysis of data taken during calibrations of the high speed digital data acquisition system. Five distinct checks that are performed on the calibration data are outlined. The five checks are for non-linearity, noise, short term drift, long term drift, and the proper functioning of the calibrator. The program has established a standard set of evaluation guidelines.

Stewart, Pamela N.↗

NASA NTRS2000

National Transonic Facility Characterization Status

This paper describes the current status of the characterization of the National Transonic Facility. The background and strategy for the tunnel characterization, as well as the current status of the four main areas of the characterization (tunnel calibration, flow quality characterization, data quality assurance, and support of the implementation of wall interference corrections) are presented. The target accuracy requirements for tunnel characterization measurements are given, followed by a comparison of the measured tunnel flow quality to these requirements based on current available information. The paper concludes with a summary of which requirements are being met, what areas need improvement, and what additional information is required in follow-on characterization studies.

Bobbitt, C., Jr.↗

NASA NTRS2002

Investigation of Reynolds Number Effects on a Generic Fighter Configuration in the National Transonic Facility

A wind tunnel test of a generic fighter configuration was tested in the National Transonic Facility through a cooperative agreement between NASA Langley Research Center and McDonnell Douglas. The primary purpose of the test was to assess Reynolds number scale effects on a thin-wing, fighter-type configuration up to full-scale flight conditions (that is, Reynolds numbers of the order of 60 million). The test included longitudinal and lateral/directional studies at subsonic and transonic conditions across a range of Reynolds numbers from that available in conventional wind tunnels to flight conditions. Results are presented for three Mach numbers (0.6, 0.8, and 0.9) and three configurations: (1) Fuselage/Wing; (2) Fuselage/Wing/Centerline Vertical Tail/Horizontal Tail; and (3) Fuselage/Wing/Trailing-Edge Extension/Twin Vertical Tails. Reynolds number effects on the longitudinal aerodynamic characteristics are presented herein.

Tomek, W. G.↗

NASA NTRS2015

Influences of Models on the Unsteady Pressure Characteristics of the NASA National Transonic Facility

Pressure fluctuations have been measured over the course of several tests in the National Transonic Facility to study unsteady phenomenon both with and without the influence of a model. Broadband spectral analysis will be used to characterize the length scales of the tunnel. Special attention will be given to the large-scale, low frequency data that influences the Mach number and force and moment variability. This paper will also discuss the significance of the vorticity and sound fields that can be related to the Common Research Model and will also highlight the comparisons to an empty tunnel configuration. The effectiveness of vortex generators placed at the interface of the test section and wind tunnel diffuser showed promise in reducing the empty tunnel unsteadiness, however, the vortex generators were ineffective in the presence of a model.

Jones, Gregory↗

NASA NTRSDate not supplied

Numerical Simulation of the High-Speed Leg of the National Transonic Facility

Numerical simulations for the flow inside the high-speed leg of the National Transonic Facility was conducted. The NASA Tetrahedral Unstructured Software System (TetrUSS) with its USM3D_ME solver was used to perform the numerical simulations. USM3D_ME is developed and maintained by NASA Langley Research Center. Simulations were conducted for three configurations: empty tunnel, body of revolution installed, and NASA Common Research Model installed in the test section. Simulations were performed for a test section Mach number of 0.7 and 0.85 and a corresponding Reynolds number of 8 million per ft. A controller was developed that automated dynamic outflow boundary and streamlined the process of running multiple simulations. The use of a dynamic outflow boundary was the key parameter to drive simulation to the desired tunnel conditions. The numerical simulations captured expected flow features in NTF test section and in the tunnel plenum. The simulations depicted that separation of the flow inside the diffuser appears to be asymmetric and more extensive toward the top and bottom walls. Analysis of the flow field were conducted, and the computed drag coefficient compared to wind tunnel data.

NTF↗

NASA NTRSDate not supplied

Surface Pressure Results for the NATO AVT-298 SWiFT Configuration in the National Transonic Facility

A high Reynolds number wind tunnel test of the Swept Wing Flow Test (SWiFT) configuration was conducted in the National Transonic Facility at the NASA Langley Research Center during the summer of 2023. The test campaign was the culmination of an international collaboration under the NATO AVT-298 research task group. The main objective of the test was to investigate Reynolds number scaling effects on the low-speed stability & control characteristics of the SWiFT model. Surface pressure results corroborate the force & moment results and help to provide more insight into the observed flow behavior. The effect of angle of attack and Reynolds number on the low-speed surface pressure results are analyzed particularly around the leading edge of the model. The onset and progression of flow separation on the wings particularly near the wing crank is also investigated, as well as the cause of an observed double-stall behavior. Finally, the transonic results showed a slight forward movement of the shock location with decreased shock strength as Reynolds number was increased. The data acquired from the test will ultimately help improve computational aerodynamic analysis and design tools for application to future BWB-type vehicle configurations.

NATO AVT-298↗

NASA NTRSDate not supplied

Surface Pressure Results for the NATO AVT-298 SWiFT Configuration in the National Transonic Facility

A high Reynolds number wind tunnel test of the Swept Wing Flow Test (SWiFT) configuration was conducted in the National Transonic Facility at the NASA Langley Research Center during the summer of 2023. The test campaign was the culmination of an international collaboration under the NATO AVT-298 research task group. The main objective of the test was to investigate Reynolds number scaling effects on the low-speed stability & control characteristics of the SWiFT model. Surface pressure results corroborate the force & moment results and help to provide more insight into the observed flow behavior. The effect of angle of attack and Reynolds number on the low-speed surface pressure results are analyzed particularly around the leading edge of the model. The onset and progression of flow separation on the wings particularly near the wing crank is also investigated, as well as the cause of an observed double-stall behavior. Finally, the transonic results showed a slight forward movement of the shock location with decreased shock strength as Reynolds number was increased. The data acquired from the test will ultimately help improve computational aerodynamic analysis and design tools for application to future BWB-type vehicle configurations.

NATO AVT-298↗